OVM 3.2.1 upgrade issues
Hi all,
I have upgraded the Oracle VM manager and server from 3.0.3 to 3.2.1. OVM server and manager upgrade ran fine but the guest machine which are created using OVM 3.0.3 versions are hanging. At OVM 3.0.3 while creating a server pool, I used the same OVM server ip address instead of a new virual ip address. When I try to create a server pool with the same ip address I am getting an error like ORMRU_000044E cannot se the virtual IP address because the IP address is already in use of the server. I have tested this on development still facing the same problem. I have tried even upgrading to OVM manager and server to 3.2.2, still it is not allowing me create a server pool with the same OVM server ip address.
Please let me know if anyone faced the same problem. I have 7 different OVM 3.0.3 production servers with critical guest machines running. I used RAW disk space of the server to create the virtual machines.
Thanks
Rao
Hi all,
I have upgraded the Oracle VM manager and server from 3.0.3 to 3.2.1. OVM server and manager upgrade ran fine but the guest machine which are created using OVM 3.0.3 versions are hanging. At OVM 3.0.3 while creating a server pool, I used the same OVM server ip address instead of a new virual ip address. When I try to create a server pool with the same ip address I am getting an error like ORMRU_000044E cannot se the virtual IP address because the IP address is already in use of the server. I have tested this on development still facing the same problem. I have tried even upgrading to OVM manager and server to 3.2.2, still it is not allowing me create a server pool with the same OVM server ip address.
Please let me know if anyone faced the same problem. I have 7 different OVM 3.0.3 production servers with critical guest machines running. I used RAW disk space of the server to create the virtual machines.
Thanks
Rao
Similar Messages
-
Upgrade issues OBIEE 10g to 11g along with OBIA upgrade
Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AMHI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya -
Report generation toolkit upgrade issues
I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG 92 KBHi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation -
EHP Upgrade Issue - Java Stack
Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AMIssue resolved
-
Hi,
We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
Some points i shortlisted are :
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
I know there are others. Any help would be appreciated.
aRsCheck the below links
http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues -
Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh-----Original Message-----
From: Venkatesh, Suma
Sent: Thursday, May 24, 2001 2:39 PM
To: '[email protected]'
Subject: Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh -
R12 upgrade issue:Not able to login using forms:Please help****urgent
We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help -
ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative
Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
ThanksHi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM -
Hi All,
I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
ThanksHi mark,
Can u please send me the upgrade issue list to this email address
[email protected] -
OVM 3.2.2 Upgrade - OVS account password
I just downloaded the OVM 3.2.2 upgrade and started running the runUpgraded.sh script. I can't seem to get past the password prompt for the ovs user account for MySQL.
I've tried every password I could possibly think of. Is there a pre-defined password for the ovs account in MySQL?
./runUpgrader.sh
2013-03-19 11:27:53
2013-03-19 11:27:53 Starting Oracle VM Manager upgrade...
2013-03-19 11:27:53
2013-03-19 11:27:53 Oracle VM Manager 3.2.2.520 upgrade utility
2013-03-19 11:27:53
2013-03-19 11:27:53
2013-03-19 11:27:53 It is highly recommended to do a full database repository backup prior to upgrading Oracle VM Manager ...
2013-03-19 11:27:53
2013-03-19 11:27:53 Press [Enter] key to continue ...
2013-03-19 11:27:54
2013-03-19 11:27:54 Oracle VM Manager is running ...
2013-03-19 11:28:14 Verifying installation status ...
2013-03-19 11:28:14 Read Oracle VM Manager config file ...
2013-03-19 11:28:14 Found Oracle VM Manager install files ...
2013-03-19 11:28:14 Found Oracle VM Manager upgrader ...
2013-03-19 11:28:14 Found Oracle WebLogic Server ...
2013-03-19 11:28:14 Found Java ...
2013-03-19 11:28:14 Using the following information :
2013-03-19 11:28:14 Database type : MySQL
2013-03-19 11:28:14 Database Host : localhost
2013-03-19 11:28:14 Database SID : ovs
2013-03-19 11:28:14 Database LSNR : 49500
2013-03-19 11:28:14 Oracle VM Schema : ovs
2013-03-19 11:28:14 Oracle VM Manager UUID : 0004fb0000010000f9cdd3f46621fd16
2013-03-19 11:28:14 Current Build ID : 3.2.1.516
2013-03-19 11:28:14 Upgrade from version : 3.2.1
2013-03-19 11:28:14 Upgrade to version : 3.2.2
2013-03-19 11:28:14 Using /tmp/workdir.OsQPV18773 for backup and export location.
2013-03-19 11:28:14 Using /tmp/patchdir.NhUx18775 for patching.
Enter password for user ovs :
2013-03-19 11:28:16 Invalid Oracle VM Manager Database Credentials... Exiting upgrade process.Nevermind, uninstalled and installed 3.2.2
Once I read this during the install, I knew what I had done wroing with the upgrade password.
One password is used for all users created and used during the installation.
Enter a password for all logins used during the installation:
Invalid password.
Passwords need to be between 8 and 16 characters in length.
Passwords must contain at least 1 lower case and 1 upper case letter.
Passwords must contain at least 1 numeric value.
Edited by: esinger on Mar 20, 2013 9:43 AM -
IDSM-2 - upgrade issue - 5.x to 6.x
Hello All,
I have an issue upgrading the IDSM-2 module I'm playing with.
It is currently running version 5.0(2).
The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
Continue with upgrade? []:
There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
Does anybody how to troubleshoot this simple(I guess) upgrade issue?
Regards,
Thibault.You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
IPS-K9-6.1-2-E3.pkg
It can be downloaded here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6 -
Frustrating Phone Upgrade issue
We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.
LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message -
OVM 3.1.1 upgrade to OVM 3.2.2 summary
Storage uses local repository and OVM Manager 3.1.1 "ovm311-m" runs on OVM 3.1.1 host "ovm311",
Configuration summary of OVM 3.1.1 host,
[root@ovm311 ~]# dmidecode --type 1
# dmidecode 2.10
SMBIOS 2.6 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Oracle Corporation
Product Name: SUN FIRE X4170 M2 SERVER
Version:
Serial Number: XXXXXXXXXX
UUID: FF200008-FFFF-FFFF-FFFF-002128F90DA0
Wake-up Type: Power Switch
SKU Number: 30543821+1+1
Family:
[root@ovm311 ~]# xm info | grep total_memory
total_memory : 147447
[root@ovm311 ~]# cat /etc/ovs-release
Oracle VM server release 3.1.1
[root@ovm311 ~]# df -T -k
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 69163868 52869052 12724776 81% /
tmpfs tmpfs 974600 0 974600 0% /dev/shm
none tmpfs 974600 792 973808 1% /var/lib/xenstored
/dev/mapper/3600605b0043831601771adda5ecc0980
ocfs2 3434262528 892317696 2541944832 26% /OVS/Repositories/0004fb00000300001e2b4833cceadfb1
[root@ovm311 ~]# xm list
Name ID Mem VCPUs State Time(s)
0004fb00000600000f000553a436e435 12 1024 1 -b---- 4632.7
0004fb000006000024fcdbdd5a671e41 18 4096 2 -b---- 35931.5
0004fb00000600004de585ff2caf9aad 16 2048 1 -b---- 98482.9
0004fb000006000064b3e879d5c3a419 10 1024 1 -b---- 6063.1
0004fb0000060000779dd9141d3208bf 7 4096 2 -b---- 3009.1
0004fb00000600007e0582a43ebb876a 14 2048 2 -b---- 6750.0
0004fb000006000084edfea7ba79187f 15 2048 1 -b---- 2261.0
0004fb0000060000aa89b5bbbe8566c4 17 4096 2 -b---- 37069.5
0004fb0000060000ac0e7f2aafb524cc 5 4096 2 -b---- 2588.8
0004fb0000060000b125f3818169434d 27 2304 1 -b---- 8876.5
0004fb0000060000b20f4a1aa38509f9 28 2304 1 -b---- 11866.5
0004fb0000060000b4333b8bd864fb2f 20 16384 10 -b---- 68.0
0004fb0000060000b58ffc8db4ce7d00 11 1024 1 -b---- 14526.2
0004fb0000060000c476ce3212a40398 4 2304 1 -b---- 29018.4
0004fb0000060000cf30d5d39f1b7d35 9 1024 1 -b---- 6392.9
0004fb0000060000e3a8ee9af9e4f811 26 4096 2 -b---- 2763.4
0004fb0000060000e4e04fdfd6baeda6 24 2048 1 -b---- 3174.8
0004fb0000060000ed3d35a0cdefe136 21 2048 1 -b---- 2043.1
Domain-0 0 2039 24 r----- 290960.0
ovm311-m 1 4096 1 r----- 63205.4
[root@ovm311 ~]# tail -2 /etc/ovs-agent/agent.ini
[server]
fakeuuid=ff:20:00:08:ff:ff:ff:ff:ff:ff:a0:0d:f9:28:21:00
Configuration uses "fakeuuid" to workaround prior issues when SMBIOS was updated on x4170 M2. Reference separate posts in that regard
and Bjorn Naessens "Tips and Tricks Fakeuuid it", http://bjornnaessens.wordpress.com/2012/08/10/best-practices-in-ovm-2-fakeuuid-it/
Task summary:
1) Shutdown VM's managed by OVM Manager 3.1.1
2) Shutdown and disable "ovmm" on "ovm311-m"
3) Shutdown "ovm311-m"
4) Reboot "ovm311"
5) Boot off OVM 3.2.2 ISO
6) Install/Upgrade
Post upgrade configuration summary,
[root@ovm311 ~]# cat /etc/ovs-release
Oracle VM server release 3.2.2
[root@ovm311 ~]# cat upgrade.log
Upgrading xen-tools-4.1.3-25.el5.3.x86_64
warning: xen-tools-4.1.3-25.el5.3: Header V3 DSA signature: NOKEY, key ID 1e5e0159
Upgrading util-linux-2.13-0.52.100.1.el5_4.2.x86_64
Upgrading ovs-agent-3.2.1-183.2.x86_64
warning: /etc/ovs-agent/agent.ini created as /etc/ovs-agent/agent.ini.rpmnew
warning: /etc/ovs-agent/passwdfile created as /etc/ovs-agent/passwdfile.rpmnew
Upgrading kpartx-0.4.9-46.100.5.el5.x86_64
Upgrading 4:perl-5.8.8-38.el5.x86_64
Upgrading iscsi-initiator-utils-6.2.0.872-6.100.1.el5.x86_64
Upgrading lm_sensors-2.10.7-9.el5.x86_64
Upgrading ocfs2-tools-1.8.2-4.el5.x86_64
Upgrading 1:net-snmp-libs-5.3.2.2-17.0.1.el5_8.1.x86_64
Upgrading mailx-8.1.1-44.2.2.x86_64
Upgrading device-mapper-multipath-libs-0.4.9-46.100.5.el5.x86_64
Upgrading device-mapper-multipath-0.4.9-46.100.5.el5.x86_64
Upgrading 1:net-snmp-5.3.2.2-17.0.1.el5_8.1.x86_64
Upgrading 1:net-snmp-utils-5.3.2.2-17.0.1.el5_8.1.x86_64
Upgrading elfutils-libs-0.137-3.el5.x86_64
Upgrading kexec-tools-2.0.3-4.0.7.el5.x86_64
Upgrading ovmwatch-1.0-20.x86_64
Upgrading devmon-1.0-28.x86_64
Upgrading osc-plugin-manager-1.2.8-26.el5.noarch
Upgrading enterprise-linux-ovs-5-5.208.9.x86_64
Upgrading initscripts-8.45.30-2.100.27.el5.x86_64
Upgrading 4:vixie-cron-4.1-81.el5.x86_64
Upgrading 1:smartmontools-5.42-2.100.2.el5.x86_64
Upgrading nash-5.1.19.6-71.100.1.el5_7.5.x86_64
Upgrading mkinitrd-5.1.19.6-71.100.1.el5_7.5.x86_64
Upgrading kernel-uek-firmware-2.6.39-300.29.1.el5uek.noarch
Upgrading kernel-uek-2.6.39-300.29.1.el5uek.x86_64
Upgrading kmod-openvswitch-uek-1.6.90-2.x86_64
Upgrading openvswitch-1.6.90-7.x86_64
Upgrading grub-0.97-13.5.100.3.x86_64
Upgrading ovs-release-3.2-5.208.9.x86_64
warning: /etc/issue created as /etc/issue.rpmnew
Upgrading python-urlgrabber-3.9.1-9.100.3.el5.noarch
Upgrading sos-1.7-9.49.100.1.el5.noarch
Upgrading osc-oracle-generic-1.1.0-74.el5.noarch
Upgrading ovm-consoled-0.1-11.noarch
Upgrading osc-plugin-manager-devel-1.2.8-26.el5.noarch
Upgrading osc-oracle-ocfs2-0.1.0-38.el5.noarch
Upgrading vmpinfo3-sosreport-1.0.0-6.el5.noarch
Upgrading xen-4.1.3-25.el5.3.x86_64
Upgrading vbox-img-1.0-6.x86_64
Upgrading xen-devel-4.1.3-25.el5.3.x86_64
Upgrading ntp-4.2.2p1-9.100.1.el5_4.1.x86_64
warning: /etc/ntp.conf created as /etc/ntp.conf.rpmnew
warning: /etc/monitor/config.yml saved as /etc/monitor/config.yml.rpmsave
It should be noted that Anaconda wants to "initialize" the OCFS repository on the local storage which you should decline. Anaconda wants a
partition table but OCFS repository is laid down directly on the block device without partitioning.
[root@ovm311 ~]# fdisk -l
Disk /dev/sdb: 3516.6 GB, 3516684828672 bytes
255 heads, 63 sectors/track, 427545 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/sda: 77.3 GB, 77309411328 bytes
255 heads, 63 sectors/track, 9399 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8889 71400861 83 Linux
/dev/sda2 8890 9399 4096575 82 Linux swap / Solaris
You should also skip the install of the boot loader.Updating OVM 3 host to use "brbond0" vs "xend" managed bridge to allow direct hosting of OVM Manager VM.
Update "ifcfg-bond0",
[root@ovm322 ~]# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
BONDING_OPTS="mode=1 miimon=250 use_carrier=1 updelay=500 downdelay=500 primary=eth0"
ONBOOT=yes
BRIDGE=brbond0
Create "ifcfg-brbond0",
[root@ovm322 ~]# cat /etc/sysconfig/network-scripts/ifcfg-brbond0
DEVICE=brbond0
BOOTPROTO=bridge
ONBOOT=yes
IPADDR=A.B.C.D # IP address of ovm322
NETMASK=255.255.254.0
NETWORK=A.B.C.0
GATEWAY=A.B.C.1
Update "/etc/xen/xend-config.sxp",
# Enable network-bridge, JAP 20120618
# Disable network-bridge, JAP 20131223
#(network-script network-bridge)
Update "vif" for OVM Manager 3 "vm.cfg",
[root@ovm322 ~]# grep ^vif /etc/xen/auto/ovm322-m
vif = ['type=netfront, bridge=brbond0'] -
Windows 8.1 upgrade issues on Satellite P870 - PSPLFA
Hi there,
For better or worse over the weekend I have downloaded windows 8.1 onto a toshiba laptop (p870 PSPLFA model) that was running windows 8. Video card is NVIDIA GeForce GT 630M 2GB with Optimus + Intel HD Graphics 4000
http://www.mytoshiba.com.au/support/computers/satellite/p870/psplfa-019001/specifications
couple of issues:
(a) I am having a few problems getting windows 8.1 to work properly on this laptop and can't get/find new drivers from the toshiba website to sort out the video card properly.
Any ideas of how or when I can download video drivers that are suitable for this laptop?
Not overly keen on uninstalling and rolling back to windows 8 now that I have gone this far...
I have a call in yesterday with microsoft yesterday that seems to be going nowhere to fix a couple of other things following this upgrade.
(b) On the windows 8.1 machine my internet connection when running IE11
now seems a bit flaky and suspect this is a internet explorer 11/windows 8.1 issue (other laptops on my wireless network running windows 7 and XP are working fine and not dropping out as well as can access all the info I can't on the win 8.1 machine) which seems to be a bit of a common issues looking at some other forums and
(c) I can't download or open files from google docs (screen just freezes most of the way through the download) on the upgraded windows 8.1 machine.
Any help appreciated,
KenHi
Your notebook belongs to the PSPLFA series. This series was released in Australian
The same notebook series PSPLFE is available in Europe.
On the Toshiba EU driver page you will find all Win 8.1 update drivers
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
_Importnat:_ the Win 8.1 drivers have to be installed in the right order!
Check the installation instruction which is available in the driver list too and follow exact this order! -
Remote app upgrade issues..question. help!!!
I have been using my iPad with the remote app to control my iTunes music that is on my Mac mini in my living room. I have had the same app on my iPod and Iphone where all 3 units could request, communicate and interact with iTunes dj...and we could all promote songs by using the vote feature..which would put the hearts next to a song if folks voted to move the song up the list....well with the Remote app upgrade ..the interface is totally different on the iPad now...than it is on the iPod or phone...much more robust...but what has changed ...or maybe I just can't find it.... Is the ability to vote for songs on my iPad to move the, up the list in iTunes dj...all I can do is delete or play it immediately... Abiltiy to vote is enabled in iTunes... Anybody know how to do this in remote app upgrade?
Any help?Ok, problem not solved. I don't understand why my ATV3 disappears when sleeping. I wonder if it has to do with the ethernet only. I am going to try wi-fi only again and see if this resolves the issue. Other thoughts are that whenever my iMac is doing a back-up ill behavior occurs - which is the only activity I see that has transpired since all was well.
Maybe you are looking for
-
Get previous and latest salary from IT0008 Record
Hey guys, i am trying to develop a letter that needs to show an increment, i.e. grab the current and previous records from IT0008.. I have tried a few things: CALL FUNCTION 'HR_READ_INFOTYPE' >> this does not get the salary i need.. but gives m
-
I get the SAME behavior on my laptop. This happens with Bridge also. My desktop and laptop are both Core i7 3d gen machines. I had to resort to GIMP to get some work done. I tried updating to the latest PS CC but it failed to update with error U44M1
-
Mobile Me Gallery isn't showing in iWeb
I published an album to my Mobile Me account, but it doesn't show up in iWeb. The only album it shows available is one I deleted last week. My counter also will not show up.
-
Nvarchar field in SQL not showing up in BVM
Hi All, I have some fields which are dclared as nvarchar in SQL and i have used cast function to get them as strings into CR. Now i want to create a Dynamic parameter in BVM. In the Business Element level,i am having the same issue as the data type i
-
Hi, i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm administrator and as well managed services accou