OWB Slow Response at logon and General Client Performance

Hi all wonder if anyone confirm what i am seeing is normal. I am relatively new to OWB but we are running with 10G R2 but have noticed very poor response from a client perspective particular at logon. It take around six minutes for the design center logon box to appear after you have clicked on the icon which seam very slow. Also noticed that performance reduces within the client the longer you use the product in one session.
Question: Is what i am seeing just normal performance or can the OWB performance be improved by some form of configuration either client or java settings. My PC spec is detailed below and has 2GB of memory which was recommended by Oracle
OS Name     Microsoft Windows XP Professional
Version     5.1.2600 Service Pack 2 Build 2600
Total Physical Memory     2,048.50 MB
Available Physical Memory     1.02 GB
Total Virtual Memory     2.00 GB
Available Virtual Memory     1.89 GB
Page File Space     2.82 GB

Hey all thanks for you responses, think you might have identified the problem with the Anti Virus, rebooted machine and just start OWB on its own. Mcafee was hitting the CPU hard for five minutes and then suddenly logon box appeared so looks like thats the issue. Note sure i will be able to get that changed as it is centrally administered global setting for all machines i think. At least that explains why it took so long.
Many thanks
Will double check the DB side of things as well

Similar Messages

Since the IOS 5 update my iPad seems to run a lot slower connecting to websites and general use? Can anyone help?

Since the IOS 5 update my iPad seems to run a lot slower connecting to websites and general use? Can anyone help?

Digging a little deeper on here, and I've Cleared the Safari cache, and rebooted , so i'll see if it is any better!!!!!

Login intermittently slow with ZCM agent AND Novell client

We continue to struggle with intermittently slow logins in our environment. In testing, we noticed that logins are very fast (10-20 seconds) when only the Novell Client is installed, and very fast (~10 seconds) when only the ZCM agent is installed. However, when they are both installed, logins slow down, sometimes to 1.5 minutes or longer.
We have checked DNS and rDNS, and they are both configured properly. SLP is working properly as demonstrated by the fast logins when only the client is installed. We use LDAP for user lookup, and it also works very fast to resolve user names (~ 1 second).
We are using ZCM 10.3.1, and the client is fully patched as well (both Novell Client 2 and 4.91)
Are there any specific settings (for the ZCM agent or the client itself) that might address this issue?

My apologies, I told you to remove the wrong thing.
I should have said NMAS instead of CASA.
I am just so used to saying CASA when talking about ZCM.
In regards to NMAS, you could simply rename "NWSSO.DLL" as a test.
If NMAS is installed which is tested by the existence of this DLL, then
a certain NMAS call is always made, which in some cases can take a long
time.
On 11/9/2010 12:06 PM, dshofkom33 wrote:
>
> craig_wilson;2042688 Wrote:
>> Try removing CASA from the device and see if that makes a difference.
>> A TID will be out on the issue soon.
>>
>> On 10/5/2010 4:36 PM, kjhurni wrote:
>>>
>>> Hmm, I will have to try that. I've only observed that with ZCM
>>> installed (with Novell Client 4.91 SP5 on XP) that the login time
>> goes
>>> from about 12-15 seconds to about 50-70 seconds.
>>>
>>> But I've not tried "just" the ZCM agent.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
> I removed CASA and now I cannot sign into ZCM. I get the "unable to
> login to network because the login credentials are incorrect" Windows
> Security Message. Any ideas?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Java Applet - slow response over WAN and fast on LAN

Hi All,
Using Tomcat we have a Java applet that runs very slow over the Internet but just the opposite on the LAN (fast). On our website we have a link that we click which initializes the application. it is very slow but if the same link is clicked on the LAN it is very fast in responding. We have a 10MB internet connection and even when testing with very little traffic after peak business hours we have same results.When closing the browser and reopening it is much faster the second time. This tells me it is being Cached. If I go to a system that has never accessed the applet we are very slow again. We are hosting this application for a 3rd party so we did not write the code. This company is finger pointing at Router and I am finger pointing at Java application itself maybe not being optimal.
I am attaching "debug" info from Java Console. Can anyone identify any issues from this debug output or familiarity with this type issue. Your insight is greatly appreciated.
Java Plug-in 1.5.0_01
Using JRE version 1.5.0_01 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Netscape Navigator ...
network: Reading user preference file from C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\APPLICATION DATA\Mozilla\Profiles\default\4i0ghip7.slt\prefs.js
network: Done.
network: Loading browser proxy configuration ...
network: Done.
network: Proxy Configuration: Browser Proxy Configuration
basic: Cache is enabled
basic: Location: C:\Documents and Settings\Administrator\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@b1b4c3, refcount=1
network: Connecting http://www.mgaucb.com/gottlieb/images/codonix.png with proxy=DIRECT
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
Internal Version: 3.0.35 Build id: TB-200402041305-35
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Internal Version: 3.0.35 Build id: TB-200402041305-35
Codebase: http://www.mgaucb.com/gottlieb/
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Codebase: http://www.mgaucb.com/gottlieb/
Documentbase: http://www.mgaucb.com/gottlieb/TBUC.html
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: Documentbase: http://www.mgaucb.com/gottlieb/TBUC.html
WebAppPath: /gottlieb
Mar 7, 2009 1:12:03 AM com.codonix.trackerboard.gui.TrackerBoardApplet start(null:-1)
INFO: WebAppPath: /gottlieb
basic: Modality pushed
basic: Modality popped
network: Connecting socket://www.mgaucb.com:80 with proxy=DIRECT
Initial Trackerboard/Table: TBUrgentCare/null
Mar 7, 2009 1:12:35 AM com.codonix.trackerboard.gui.TrackerBoardApplet doLogin(null:-1)
INFO: Initial Trackerboard/Table: TBUrgentCare/null
SiteID: CodoniX
Mar 7, 2009 1:12:35 AM com.codonix.trackerboard.gui.TrackerBoardApplet doLogin(null:-1)
INFO: SiteID: CodoniX
liveconnect: the url of the applet is http://www.mgaucb.com and the permission is = false
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
Starting UI Generator....
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
Warning: No permission to control logging.
Mar 7, 2009 1:12:58 AM com.codonix.uigenerator.StartApplet init(null:-1)
WARNING: No permission to control logging.
Warning: No permission to control logging.
Mar 7, 2009 1:12:58 AM com.codonix.uigenerator.StartApplet init(null:-1)
WARNING: No permission to control logging.
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
liveconnect: JavaScript: default security policy = http://www.mgaucb.com
liveconnect: JavaScript: calling Java system code
network: Connecting socket://www.mgaucb.com:80 with proxy=DIRECT

Hi Geoff,
Thanks for posting here.
Have you checked your internet edge router ? and make sure there is no any speed limitation set on it , like QOS.
You may also try the methods below:
1. Disable RSS, Chimney, AutoTuning on 2008R2
How to know if TCP offload is working
http://blogs.technet.com/b/brad_rutkowski/archive/2007/08/10/how-to-know-if-tcp-offload-is-working.aspx
2. Install Hotfix 982860
A computer that is running Windows 7 or Windows Server 2008 R2 takes four minutes to open a Microsoft Office 2003 document from a network share
http://support.microsoft.com/kb/982860
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Slow response LV7.0 and waveform charts

I have noticed a couple of issues with a waveform chart (when actually plotting a waveform).
1. Sometimes when I right-click on the chart to format a axes it may take up to 5 minutes to display the window with the chart format controls. During this time task manager says the application is not responding.
2. When plotting anything with size (I am trying to plot 5 minutes of data at 512 samples/sec) the program slows to a crawl. If I plot a double data (take the Y data from the waveform) it works great. Why is there so much overhead with a waveform chart? Anyway to fix this?
3. Unrelated to a waveform chart but related to item 1. Sometimes when I try to save my VI (~470 kb) it goes into limbo and may take minutes
. Again the task manager says it is "not responding". This seems to be a theme with LV 7.0. Has anyone else run into this problem?

> 1. Sometimes when I right-click on the chart to format a axes it may
> take up to 5 minutes to display the window with the chart format
> controls. During this time task manager says the application is not
> responding.
>
> 2. When plotting anything with size (I am trying to plot 5 minutes of
> data at 512 samples/sec) the program slows to a crawl. If I plot a
> double data (take the Y data from the waveform) it works great. Why
> is there so much overhead with a waveform chart? Anyway to fix this?
>
> 3. Unrelated to a waveform chart but related to item 1. Sometimes
> when I try to save my VI (~470 kb) it goes into limbo and may take
> minutes. Again the task manager says it is "not responding". This
> seems to be a theme with LV 7.0. Has
anyone else run into this
> problem?
Without looking at the waveform chart, it is hard to say. Things like
autoscale will slow teh chart down a bit as it then needs to traverse
more data looking for min/max. And when the scales do need to change a
bit, all the data needs to be replotted, not just the new stuff.
Other things that slow down a chart are to make its background
transparent, and to make it overlapped. Finally, full screen updates on
a big monitor mean lots of data needs to be moved around to draw lines
and rectangles, and that either comes down to the CPU or video card.
If you have more questions, or a VI to look at, post again.
Greg McKaskle

Slow response when typing and/or pulling up new message

I do not have any Add-ons or extensions, so that is not the issue. I have a new computer running Windows 7, so I don't believe that is the issue either. But I have a lot of "hour-glass" time when typing and when clicking on emails to open the message. Is just seems to be responding slow. Is it Thunderbird ... or my computer?

As for Thunderbird, the only relation I could see is in line spell checking. Could you please check your Thunderbird preferences, Composition, Spelling. Does it help to uncheck 'Enable spell check as you type'?
If not, I could imagine this to be related to a virus scanner, or a display driver that is not up to date. You might be able to get an update from it from the manufacturer of your video adapter.

Slow Response Sun ONE 6.1 SP3 Win 2003

My Sun ONE web server is processing my JSP pages very quickly when serving one session at a time. However when there are 4 or more active sessions, it slows right down. Response time goes from 2 seconds (1 active session) to 60 seconds (multiple active sessions) for a single JSP page. I've been running the performance monitor to see if I can notice anything, but nothing seems to stand out. I have tried manipulating the Keep Alive settings and the Performance settings within the Magnus Editor but there hasn't been a noticable improvement.
I've recently upgraded to SP4 to see if this solved my problem, but there was no imporvement.
This server is an HP DL380 with dual 2.8GHz Xeon processors & 2 Gigs of RAM. There is a lot of available disk space. I'm running Windows 2003 and it's up to date with all the latest patches.
Anyone have any ideas or experienced this before?
I've attached the output from my performance monitor:
webservd pid: 4280
Sun ONE Web Server 6.1SP4 B01/20/2005 21:34 (WINNT DOMESTIC)
Server started Thu Mar 03 09:41:06 2005
Process 4280 started Thu Mar 03 09:41:06 2005
ConnectionQueue:
Current/Peak/Limit Queue Length 0/1/4096
Total Connections Queued 126
Average Queue Length (1, 5, 15 minutes) 0.00, 0.00, 0.00
Average Queueing Delay 0.02 milliseconds
ListenSocket ls1:
Address http://10.178.132.7:8080
Acceptor Threads 8
Default Virtual Server https-guruweb01
KeepAliveInfo:
KeepAliveCount 2/64
KeepAliveHits 1083
KeepAliveFlushes 0
KeepAliveRefusals 0
KeepAliveTimeouts 11
KeepAliveTimeout 360 seconds
SessionCreationInfo:
Active Sessions 2
Keep-Alive Sessions 1
Total Sessions Created 48/256
CacheInfo:
enabled yes
CacheEntries 110/1024
Hit Ratio 1912/2164 ( 88.35%)
Maximum Age 30
Native pools:
NativePool:
Idle/Peak/Limit 5/6/128
Work Queue Length/Peak/Limit 0/1/0
Server DNS cache disabled
Async DNS disabled
Performance Counters:
Average Total Percent
Total number of requests: 1213
Request processing time: 1.5520 1882.5520
default-bucket (Default bucket)
Number of Requests: 1213 (100.00%)
Number of Invocations: 15085 (100.00%)
Latency: 0.0002 0.2013 ( 0.01%)
Function Processing Time: 1.5518 1882.3507 ( 99.99%)
Total Response Time: 1.5520 1882.5520 (100.00%)
Sessions:
Process Status Function
4280 keep-alive
response service-dump
response service-j2ee
Thanks...

The JSP's are simply Hello World JSP's (however I created these type of JSP's for testing and they do respond slowly as well when these are multiple sessions).
These JSP functioned fine on iPlanet 6.0 SP1 (JDK 1.2.2) without any slow response on Win2K and inferior hardware.

Issue with parallel operation of SAP NW SSO 2.0 and SNC Client Encryption (Logon Groups)

Hi!
One of our customers is using the SNC Client Encryption solution to ensure encryption using SNC (based on Kerberos Technology) for their SAP GUI Dialog connections. They have lots of SAP backends DEV, QAS, PRD all with the SNC Client Encryption SNC Lib installed. The profile parameter snc/identity/as contains the following value: p:CN=SAP/<ServiceAccount>@<DOMAIN>.
Example: p:CN=SAP/[email protected]
The customer is using one AD Service Account "SNCServiceUser" with one registered SPN "SAP/SNCServiceUser" for all systems (yes, this is not recommended... but the case).
Important: All users use group entries in the SAP Logon (saplogin.ini). Means, for SAP logon the SNC name can not be manually configured on the SAP Front End. With group logons, the application server's SNC name is dynamically requested by the message server each time a SAP GUI connection is started. The SNC Name is greyed out in this case as dynamically obtained from the applications servers profile parameter snc/identity/as.
Now our customer implements SAP NetWeaver Single Sign-On 2.0 within his landscape. Based on the Secure Login Server 2.0 (SP3) he likes to use X.509 based authentication to his AS ABAP backends using SAP GUI SNC while others still use SNC Client Encryption.
Replacing the SNC Library on the AS ABAP
The Secure Login Library 2.0 (SP3) has been installed on one of the ABAP systems and the SNC Client Encryption SNC Library (which is based on SSO 1.0) is no longer used, thus we changed the parameter snc/gssapi_lib to point to the new SNC library. We removed the old PSE.ZIP containing the keytab and created the new SAPSNCSKERB.PSE incl. the keytab and proper credentials. To ensure parallel operation, we kept the snc/identity/as value as is = p:CN=SAP/[email protected].
After restarting the system with initialized Secure Login Library 2.0, still the SNC client encryption works fine for existing users.
The problem
We created on the Secure Login Server an SNC certificate for the AS ABAP which has the following X.509 Distinguised Name Fomat: CN=SAP/[email protected] This is to avoid having to change the snc/identity/as to an "real" X.509 DN which would lead to non-working SNC Client Encryption for all the other users using SAP GUI and logon groups.
As soon as we install the PSE via STRUST on the system the SNC Client Encryption solution stops working with error „Server refuses kerberos key exchange“.
As part of an pilot implementation we have installed Secure Login Client 2.0 (SP3) on some test PCs. The test PC with SLC is able to perform Single Sign-On with SNC based on X.509 (incl. Encryption) to the ABAP system.
Seems the SAP System now only tries to do X.509 based authentication thus key exchange fails. The problem is, we cannot change the snc/identity/as value because of the logon groups. If we were able to do so, we would in any case set the server identity to X.509 DN and in addition create the SAPSNCSKERB.PSE incl. keytab. This should work, as confirmed by SAP see this post.
Any ideas how to solve this and have both solutions in parallel?
Appreciate any help.
Regards,
Carsten

Hi all,
we was able to fix the issue. It was an issue with the customers cluster configuration and the $SECUDIR variable. This tricky issue leads to non working or sporadic working SNC Client Encryption...
This was how the configuration looks before:
Environment variable $SECUDIR is defined:
"/ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec“
sapgenpse seclogin -l -v
running seclogin with USER="<SID>adm"
Credentials for username '<SID>adm':
0 (LPS:OFF):
         (LPS:OFF): /ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCSKERB.pse
1 (LPS:OFF):
         (LPS:OFF): /usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCS.pse
After changing the $SECUDIR to "/usr/sap/<SID>/DVEBMGSxx/sec“ and re-creating the credentials, it worked like a charm.
As a result of this we can confirm, this configuration and SNC Client Encryption works with CommonCryptoLib in parallel to the SSO configuration.
And Valerie was right with 2. SLC starting from V. 1.0 SP2 PL3 was able to convert the CN= part of the SNC Name into an SPN, was my mistake. In addition SNC Client Encryption starting from Version 1 SP1 PL1 does this also.. just to make this clear
Thread closed hope this helps someone
Carsten

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Using collections and experiencing slow response

I am experiencing slow response when using htmldb_collection. I was hoping someone might point me in another direction or point to where the delay may be occurring.
First a synopsis of what I am using these collections for. The main collections are used in order to enable the users to work with multiple rows of data (each agreement may have multiple inbound and outbound tiered rates). These collections, OBTCOLLECTION and IBTCOLLECTION, seem to be fine. The problem arises from the next set of collections.
OBTCOLLECTION and IBTCOLLECTION each contain a field for city, product, dial code group and period. Each of these fields contains a semi-colon delimited string. When the user chooses to view either the outbound tiers (OBTCOLLECTION) or the inbound tiers (IBTCOLLECTION), I generate four collections based on these four fields, parsing the delimited strings, for each tier (record in the OBT or IBT collection). Those collections are used as the bases for multiple select shuttles when the user edits an individual tier.
Here is the collection code for what I am doing.
When the user chooses an agreement to work with, by clicking on an edit link, they are sent to page 17 (as you see referenced in the code). That page has the on-demand process below triggered on load, after footer.
-- This process Loads the collections used
-- for the Inbound and Outbound tier details
     -- OBTCOLLECTION
     -- IBTCOLLECTION
-- It is an on-demand process called on load (after footer) of page 17 --
-- OUTBOUND TIER COLLECTION --
     if htmldb_collection.collection_exists( 'OBTCOLLECTION') = TRUE then
         htmldb_collection.delete_collection(p_collection_name => 'OBTCOLLECTION' );
     end if;
     htmldb_collection.create_collection_from_query(
         p_collection_name => 'OBTCOLLECTION',
         p_query           => 'select ID, AGREEMENT_ID, FIXED_MOBILE_ALL,
                          OF_TYPE,TIER, START_MIN, END_MIN,
                                         REVERT_TO, RATE,CURRENCY,
                                         PENALTY_RATE, PENALTY_CURR,
                   PRODUCT,CITY, DIAL_CODE_GROUP, PERIOD,
                    to_char(START_DATE,''MM/DD/YYYY''),
                                         to_char(END_DATE,''MM/DD/YYYY''),
                                         MONTHLY,EXCLUDED,
                   ''O'' original_flag
                      from outbound_tiers
                      where agreement_id = '''||:P17_ID ||'''
                      order by FIXED_MOBILE_ALL, ID',
         p_generate_md5    => 'YES');
-- INBOUND TIER COLLECTION --
     if htmldb_collection.collection_exists( 'IBTCOLLECTION') = TRUE then
         htmldb_collection.delete_collection(p_collection_name => 'IBTCOLLECTION' );
     end if;
     htmldb_collection.create_collection_from_query(
         p_collection_name => 'IBTCOLLECTION',
         p_query           => 'select ID, AGREEMENT_ID, FIXED_MOBILE_ALL,
                          OF_TYPE,TIER, START_MIN, END_MIN,
                                         REVERT_TO, RATE,CURRENCY,
                                         PENALTY_RATE, PENALTY_CURR,
                          PRODUCT,CITY, DIAL_CODE_GROUP, PERIOD,
                          to_char(START_DATE,''MM/DD/YYYY''),
                                         to_char(END_DATE,''MM/DD/YYYY''),
                                         MONTHLY,EXCLUDED,
                          ''O'' original_flag
                      from inbound_tiers
                      where agreement_id = '''||:P17_ID ||'''
                      order by FIXED_MOBILE_ALL, ID',
         p_generate_md5    => 'YES');
     commit;The tables each of these collections is created from are each about 2000 rows.
This part is working well enough.
Next, when the user chooses to view the tier information (either inbound or Outbound) they navigate to either of two pages that have the on-demand process below triggered on load, after header.
-- This process Loads all of the collections used
-- for the multiple select shuttles --
     -- DCGCOLLECTION
     -- CITYCOLLECTION
     -- PRODCOLLECTION
     -- PRDCOLLECTION
-- It is an on-demand process called on load (after footer) --
DECLARE
   dcg_string long;
   dcg varchar2(100);
   city_string long;
   the_city varchar2(100);
   prod_string long;
   prod varchar2(100);
   prd_string long;
   prd varchar2(100);
   end_char varchar2(1);
   n number;
   CURSOR shuttle_cur IS
      SELECT seq_id obt_seq_id,
             c013 product,
             c014 city,
             c015 dial_code_group,
             c016 period
      FROM htmldb_collections
      WHERE collection_name = 'OBTCOLLECTION';
   shuttle_rec shuttle_cur%ROWTYPE;
BEGIN
-- CREATE OR TRUNCATE DIAL CODE GROUP COLLECTION FOR MULTIPLE SELECT SHUTTLES --
     htmldb_collection.create_or_truncate_collection(
     p_collection_name => 'DCGCOLLECTION');
-- CREATE OR TRUNCATE CITY COLLECTION FOR MULTIPLE SELECT SHUTTLES --
     htmldb_collection.create_or_truncate_collection(
     p_collection_name => 'CITYCOLLECTION');
-- CREATE OR TRUNCATE PRODUCT COLLECTION FOR MULTIPLE SELECT SHUTTLES --
     htmldb_collection.create_or_truncate_collection(
     p_collection_name => 'PRODCOLLECTION');
-- CREATE OR TRUNCATE PERIOD COLLECTION FOR MULTIPLE SELECT SHUTTLES --
     htmldb_collection.create_or_truncate_collection(
     p_collection_name => 'PRDCOLLECTION');
-- LOAD COLLECTIONS BY LOOPING THROUGH CURSOR.
     OPEN shuttle_cur;
     LOOP
        FETCH shuttle_cur INTO shuttle_rec;
        EXIT WHEN shuttle_cur%NOTFOUND;
        -- DIAL CODE GROUP --
        dcg_string := shuttle_rec.dial_code_group ;
        end_char := substr(dcg_string,-1,1);
        if end_char != ';' then
           dcg_string := dcg_string || ';' ;
        end if;
        LOOP
           EXIT WHEN dcg_string is null;
           n := instr(dcg_string,';');
           dcg := ltrim( rtrim( substr( dcg_string, 1, n-1 ) ) );
           dcg_string := substr( dcg_string, n+1 );
           if length(dcg) > 1 then
            htmldb_collection.add_member(
               p_collection_name => 'DCGCOLLECTION',
               p_c001 => shuttle_rec.obt_seq_id,
               p_c002 => dcg,
               p_generate_md5 => 'NO');
           end if;
        END LOOP;
        -- CITY --
        city_string := shuttle_rec.city ;
        end_char := substr(city_string,-1,1);
        if end_char != ';' then
           city_string := city_string || ';' ;
        end if;
        LOOP
           EXIT WHEN city_string is null;
           n := instr(city_string,';');
           the_city := ltrim( rtrim( substr( city_string, 1, n-1 ) ) );
           city_string := substr( city_string, n+1 );
           if length(the_city) > 1 then
            htmldb_collection.add_member(
               p_collection_name => 'CITYCOLLECTION',
               p_c001 => shuttle_rec.obt_seq_id,
               p_c002 => the_city,
               p_generate_md5 => 'NO');
           end if;
        END LOOP;
        -- PRODUCT --
        prod_string := shuttle_rec.product ;
        end_char := substr(prod_string,-1,1);
        if end_char != ';' then
           prod_string := prod_string || ';' ;
        end if;
        LOOP
           EXIT WHEN prod_string is null;
           n := instr(prod_string,';');
           prod := ltrim( rtrim( substr( prod_string, 1, n-1 ) ) );
           prod_string := substr( prod_string, n+1 );
           if length(prod) > 1 then
            htmldb_collection.add_member(
               p_collection_name => 'PRODCOLLECTION',
               p_c001 => shuttle_rec.obt_seq_id,
               p_c002 => prod,
               p_generate_md5 => 'NO');
           end if;
        END LOOP;
        -- PERIOD --
        prd_string := shuttle_rec.period ;
        end_char := substr(prd_string,-1,1);
        if end_char != ';' then
           prd_string := prd_string || ';' ;
        end if;
        LOOP
           EXIT WHEN prd_string is null;
           n := instr(prd_string,';');
           prd := ltrim( rtrim( substr( prd_string, 1, n-1 ) ) );
           prd_string := substr( prd_string, n+1 );
           if length(prd) > 1 then
            htmldb_collection.add_member(
               p_collection_name => 'PRDCOLLECTION',
               p_c001 => shuttle_rec.obt_seq_id,
               p_c002 => prd,
               p_generate_md5 => 'NO');
           end if;
        END LOOP;
     END LOOP;
     CLOSE shuttle_cur;
    commit;
END;Creating these collections from the initial collection is taking way too long. The page is rendered after about 22 seconds (when tier collection has 2 rows) and 10 minutes worst case (when the tier collection has 56 rows).
Thank you in advance for any advice you may have.

Try to instrument/profile your code by putting timing statements after each operation. This way you can tell which parts are taking the most time and address them.

EBS r12 (12.0.6) giving slow response to clients.

Hi,
Anyone can help me to findout the bottleneck of slow response of EBS r12.
We r using oracle 10g (10.2.0.3) and r12 (12.0.6).
its urgent...plz.
thx.

Hi;
Similar topic discussed before,Please check:
-business Performance issuse
Re: E-business Performance issuse
You can also check [this search|http://forums.oracle.com/forums/search.jspa?threadID=&q=performance&objID=c3&dateRange=all&userID=&numResults=15]
Regard
Helios

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

Addon connection and SAP Client running slow

The configuration of the server
IBM SERVER X3400 M3 7379-1VS
IBM 300 GB SAS HDD
IBM 4 GB RAM KIT
IBM RPS FOR SERVER
IBM CPU X3400
IBM MS ROK KIT
MS WIN 2008 SERVER R2 64 BIT
But still when my client system starts the SAP application runs very slow.
can anyone help us in the issue.

Hi,
Please try the following:
1. Try to set the Add-on loading to Manual, lets try running the program without the Add-on and
lets try to compare the slowness of both scenario and observe if the add-on is the cause of the problem.
2. Is your Application and Database Server are same machine?
Much better if you separate them.
3. Running add-on requires more RAM 4Gig is not enough.
4. What is your SBO version and patch?
5. Try to view in the resource monitor which process takes big consumption of your resources.
Thanks.
Clint

Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

OWB Slow Response at logon and General Client Performance

Similar Messages

Maybe you are looking for