P.O texts in printout

Dear All,
I have created a new P.O document type for capital purchases "ZCAP" by copying from NB doc type.
While coding the print progem for my new document type, my abaper says that for the new doc type there are no table entries in T166K, which is used for material P.O texts.
Pls suggest functionally if I have made any mistake while creation of DOC type.
regards
Arahanth

By usin Zcap try to creat one PO..
Goto text
check there for
Text ID & object type..
If required take the help of Abaper.
For copying material text to PO, some configuration required.
Check in PO text node under purchasing...

Similar Messages

Anyone know the cost of getting a detailed text message printout?

Anyone know the cost of getting a detailed text message printout? Thanks!

Thanks to the community for your replies.
Hello pederson3,
Thanks for posting. That’s a good question. We don’t have an additional charge for you to be able to obtain text message details. If you simply want to view certain information such as date, time and number, as Grothka mentioned, you can login to My Verizon and view the last 3 months of messaging details.
If you would like to retrieve the content of the text messages, as budone stated, we do require a search warrant. Keep in mind text messages are only kept approximately 3-5 days but never more than 10 days due to system limitations. I’m sure you’ll find this information helpful. Have a great day.

Fuzzy Text at Printout

When I printout images or text from fireworks ,or even if I
export it as a JPEG, the images and, especially, the text come out
as though anti-aliased and then zoomed into (fuzzy, blurry).
The text is size 19 and the canvas is as large as an A4 piece
of paper. Resolution is 72. I tried changing the anti-aliasing
options of the text but none help.
The text looks perfectly fine when I print it out from
Microsoft Word.
Please
please help me make the text not fuzzy pr blurry but
fine.

On Thu, 11 May 2006 00:46:00 +0400, IDenigma
<[email protected]> wrote:
> When I printout images or text from fireworks ,or even
if I export it as
> a
> JPEG, the images and, especially, the text come out as
though
> anti-aliased and
> then zoomed into (fuzzy, blurry).
>
> The text is size 19 and the canvas is as large as an A4
piece of paper.
> Resolution is 72.
That's not enough. I have no idea what your printer specs are
but 72 (I
assume you are referring to pixels per inch, not per cm) is
not enough.
I'd suggest using 200. 300 is likely to be the highest value
making some
sence.
Ilya Razmanov
http://photoshop.msk.ru -
Photoshop plug-in filters

Cannot print -- random text & blank pages when printing -- HP Color Laserjet 3600N

Apple Support Community,
I'm having some trouble connecting my computer and printer via a network connection. The printer functions fine among other computers (Mac, PC) connected via a network connection, but one particular MacBook is giving me trouble.
I can get the printer and laptop to connect, however when I try to print, it gets buggy on me. Usually it will print a page with some random text, followed by an excess amount of blank pages, then another page with text similar to the first. The text usually has information including font types and other formatting data, but not what was "printed."
I have tried to update the printer drivers, but I cannot get the printer utility to utalize them. After installing the most recent drivers, it will continue to suggest the generic laser printer drivers (1.0 verison), or I can choose other printer drivers (including "base" 3000 model drivers), but the 3600N drivers are not avalible on the list. Both the generic drivers and the HP drivers give me the random text upon printouts.
The laptop is a MacBook Pro with 10.6.
What is the best course of action to remedy the printer problem?
Thanks!
Jel.

Over the holidays, I spent a couple of hours on the phone with HP, a couple with Microsoft, and previously with Apple. Microsoft said they are working on updates, should be fixed by the release of Office 2008. Apple says there's a compatibility issue among the HP printer and Leopard and "some" programs. HP tells me it's an "old" printer (which they were happy to sell me in April 2007) and they may not release new drivers. HP also says Apple knows there are printing issues.
In the meantime, I'm using Pages and shopping for a new non-HP printer.

Text in Billing document should determine into output

Dear Friends,
Help me to determine billing document item text into printout as a line item description.
My Scenario is:
Generally in printout item description is determined.But i need to determine the billing item text as a item description.
Thanks in advance,
Regards,
Ravi

Hi Ravi
If you want the billing item text as item description then you have to take your ABAP team help and ask your ABAP team to include the logic that billing item text has to come as item description As these changes can be done in the Smartforms.
Also give NAST, STXFTXT tables which may help your ABAP team
Regards
Srinath

Not able to see PO text in prinout when printed after any change.

When I make any change in PO (e.g. Quantity, price, delivery date), and take printout, I don't see text (item level). But when it was printed first time, I can see all texts in printout.
Pls help.

Go to SPRO-MM-Purchasing-Messages-Text for messages- Define Texts for Purchase Order
Here in the Text for document item should be set for operation 2 menas for change than it will print on the PO.
In the heading also it needs to be setup for change

HP Photosmart 7520 prints text too tiny to read

I bought an HP Photosmart 7520 all-in-one Printer a couple months ago. I have tried EVERYTHING I can, using my PC settings to any printer settings, to enlarge the text/font printout... all to no avail!! The printer is set up as a wireless printer to my new HP ENVY TouchSmart PC all-in-one PC. The print size is soooo tiny I cannot read it without a magnifying glass (nor can any one else)!! I have looked at the Support site and Forum but can't find any answer(s) to this printer problem. There certainly MUST be a way to enlarge the font that the printer prints out. PLEASE HELP !!!

I had this same problem for the longest time, which led me to this forum. However, when it was mentioned as an "application" problem, that led me to check the page setup from the file menu in my browser, which was set at 70%.
Changed it to 100% and it printed out larger.
Hope that helps!

HP laserjet 1536dnf MFP keeps Printing

Hi Admin,
I currently work as an IT Entry Level Support, and I have a problem with HP laserjet 1536dnf MFP that I cannot give time to figure out why.
Here's what I have:
System: WXP Pro v2002 SP2
Hardware: HP laserjet 1536dnf MFP
Device Manager Driver: HP LJ M1530 Series Scan ; Driver Date: Nov 16, 2009
HP laserjet 1536dnf MFP keeps printing JZJZL() and different Random Garbled characters, I can only print properly if I switch it on and Turn it on again.
One more question: Is there a way to stop whatever is printing from the HP Toolbox.
Thank you..
This question was solved.
View Solution.

Hi @Claude-Antoine,
I understand that the printer is printing garbled print and something keeps printing off from the Toolbox. I can help you with this.
Most likely the driver is corrupted and you will have to uninstall and reinstall the printer software.
If you can print the hardware self test page properly, then it would be a software issue.
Printing a Configuration Report.
I have provided a document with some steps to try to see if that will resolve the issue.
Resolving Strange, Garbled or Illogical Text, Incomplete Printouts, or Missing Text or Graphics.
Here is the link for the newest drivers. HP LaserJet Full Feature Software and Driver.
How is the printer connected? (USB/Ethernet)
If your networked, do you have a Static IP setup and what kind of router are you using?
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to get my color ink to print in color

i cannot get my printer in color, when i hit print, i clink on color but all i get in black, and its a new cartridge

Hey @ldc1982,
Welcome to the HP Support Forum.
I understand you're unable to print in colour using your HP Deskjet 1010 Printer. I would like to assist you with this. I have some suggestions that may resolve your issue.
I have located an article from HP that provides some handy steps that address this particular issue. Try the following selected Solutions from the article in sequence:
Solution four: Check the print settingsFollow these steps to check the print settings to make sure that they are appropriate for your print job.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer ().
Click Print, and then click Set Preferences. The Printing Preferences dialog box opens.
Click the Paper/Quality tab.
From the Media drop-down, select the paper type that matches the paper loaded in the input tray and the desired print quality.
Click the Advanced tab. The Advanced Options dialog box opens.
Review the following options, and then make any necessary changes. To change a setting, click the current setting, and then select the new setting from the drop-down menu displays.
Paper/Output: Make sure that the selected option matches your paper size. For example, for legal paper, select Legal.
Document Options: Make sure that Print in Grayscale is set to Off, unless you are printing in Grayscale intentionally.
Resolution: This list allows you to see the resolution specifications for the possible print quality selections. For example, Max DPI mode is 1200x1200 dpi. To change the resolution, you must click the Paper/Quality tab, and then select the paper type and print quality from the Media drop-down menu.
Click OK, and then click OK again to apply the settings.
Click OK from the Print dialog box to start the print job.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution five: Check estimated ink levels and replace low or empty cartridges
NOTE:Ink level warnings and indicators provide estimates for planning purposes only. When an indicator shows low-ink levels, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until print quality becomes unacceptable.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop. Double-click the icon for your HP printer ().
Click the Estimated Ink Levels icon. The HP Toolbox opens.
Click the Estimated Ink Levels tab. The Estimated Ink Levels window opens.
Figure : The Estimated Ink Levels window
If the ink level graphic shows low or empty cartridges, and the quality of your printouts is unsatisfactory, replace the cartridges now.Click here to go to instructions in this document for installing a replacement cartridge.
If the ink level graphic shows full cartridges, you do not need to replace the cartridges yet. Continue to the next solution.
Solution six: Print and evaluate a test page and troubleshoot defects
Follow these steps to print, and then evaluate a test page.
Step one: Print a test page
Make sure there is plain white, letter-size paper loaded in the input tray.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer ().
In the printer software, click Print.
Click Maintain Your Printer (). The HP Toolbox opens.
Click the Device Reports tab.
Click the Print Diagnostic Information icon. The test page prints.
Figure : Example of test page
Step two: Determine which cartridges printed which areas of the test page
Different cartridges print different areas of the test page. Use the following guidelines to determine which cartridge printed which areas.
The black cartridge prints the black areas of the page, such as the black bars and black text.
The color cartridge prints the color areas of the page, such as the cyan (blue), magenta, and yellow color bars.
Figure : Which cartridge prints which areas
Printed with the tri-color cartridge
Printed with the black cartridge
Make a note of which cartridge printed which areas of the test page, and then continue to the next step to check the report for defects.
Step three: Check the test page for defects
In general, if the printer and its cartridges are working correctly, all the color bars should be present, unstreaked, and uniform in color. The black text on the page should not show ink streaks.
Use the following table for examples of defects that can exist on the test page. The following examples are not inclusive, but tend to represent the most common issues.
Examples of defects on the test page
Defect
Example
Description or cause
Broken lines in grid patterns
Problem with the ink nozzles
Faded or nonuniform colors in the color blocks
Depleted cartridges, or ink mixing together
Track marks or ink smears in the text
Fibers or other debris on one or both of the cartridges
The color blocks are streaked or lined
The cartridge might be running out of ink or the nozzles might be clogged
One or more of the colored blocks is missing entirely
All colors printed - no missing colors
Yellow missing - the color cartridge is not printing correctly
The cartridge is out of one color of ink or the ink nozzles might be clogged.
If you see one or more defects on the print quality diagnostic report, continue to the next steps.
If there are no defects on the print quality diagnostic report, it indicates that the print mechanism and ink supplies work correctly. Therefore, you do not need to continue the troubleshooting steps in the remainder of this document. However, if printouts are still unsatisfactory, try the following general procedures to improve print quality:
Make sure that the image you are printing has sufficient resolution. Enlarged images might appear fuzzy or blurry.
If the issue is confined to a band near the edge of a printout, use the software you installed with the printer or another software program to rotate the image 180 degrees. The problem might not display on the other end of the printout.
Avoid leaving unprotected cartridges out of the printer for an extended period of time.
Always use the Power button to turn off the printer. This protects the cartridges from drying out.
Windows only: If you are experiencing garbled, jumbled or illogical text, incomplete printouts, or missing text or graphics, go toContinuous Pages of Strange or Garbled Characters Print in Windows.
Step four: Clean the cartridges using an automated toolFollow these steps to run an automated tool to clean the cartridges if you found defects on the extended test report.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer ().
In the printer software, click Print.
Click Maintain Your Printer (). The HP Toolbox opens.
Click the Device Services tab.
Click Clean Ink Cartridges, and then follow the on-screen instructions to clean the cartridges.
After running the tool, click Print to print a test page. If the print quality is still unacceptable, follow the on-screen instructions to run aSecond-level clean.
If these steps resolved the issue, there is no need to continue troubleshooting.
If the issue persists, see the next step.
Step five: Align the printer
NOTE:Make sure that there is plain white U.S. Letter or A4 sized paper in the input tray.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer ().
In the printer software, click Print.
Click Maintain Your Printer (). The HP Toolbox opens.
Click the Device Services tab.
Click Align Ink Cartridges, and then follow the on-screen instructions to print the alignment page.
Review the alignment page, follow the on-screen instructions to complete the alignment, and then click Done.
If these steps resolved the issue, there is no need to continue troubleshooting.
If the issue persists, see the next step.
Step six: Clean the area around the ink nozzles
Complete these steps only if there were track marks or smears in the text on the test report.
CAUTION:Do not perform these steps unless the test report specifically shows smeared text or track marks. If the report does not show this defect, continue to the next solution.
Gather the following materials:
Dry foam-rubber swabs, lint-free cloth, or any soft material that does not come apart or leave fibers (coffee filters work well)
Clean sheets of paper
Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the print cartridges)
CAUTION:Do not use platen cleaners or alcohol to clean the area. These can damage the cartridge or the printer.
Press the Power button to turn on the printer, if it is not already on.
Open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before continuing.
Figure : Open the cartridge access door
Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.
Figure : Remove the cartridge
CAUTION:Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Figure : Do not touch the contacts or nozzles
Place the cartridge on a piece of paper with the ink nozzles facing up.
Lightly moisten a clean, foam-rubber swab with distilled water.
Clean the face and edges around the ink nozzle with the swab.
CAUTION:Do not clean the ink nozzle plate.
Figure : Clean the area around the ink nozzle
Nozzle plate - DO NOT CLEAN
Area surrounding ink nozzle - Do clean
Cartridge contacts - DO NOT CLEAN
Either let the cartridge sit for 10 minutes to allow the cleaned area to dry, or use a new swab to dry it.
Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
The tri-color cartridge () goes in the slot on the left.
The black cartridge () goes in the slot on the right.
Figure : Insert the cartridge into the slot
Push the cartridge forward into its slot until it snaps into place.
Figure : Push the cartridge into the slot
Repeat these steps to clean the area surrounding the ink nozzle on the other cartridge.
Close the cartridge access door.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution seven: Replace the problem cartridge
Follow these steps to replace the problem cartridge, and then align the printer.
Step one: Remove the problem cartridge
If you have a defective cartridge or printhead, it might be under warranty. To check the warranty on your ink supplies, go tohp.com/go/learnaboutsupplies, select your country/region, and then review the limited warranty information for your supplies.
Press the Power button to turn on the printer, if it is not on already.
Lower the output tray, and then open the cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and quiet.
Figure : Open the cartridge access door
Place your finger on top of the cartridge you want to replace, and then lightly pull and press down on the cartridge to release it.
Figure : Pull and press to remove the cartridges
The tricolor cartridge (left-hand slot)
The black cartridge (right-hand slot)
Step two: Install the new cartridge
Remove the new cartridge from its package, and then carefully pull the orange tab to remove the protective plastic tape.
CAUTION:Do not touch the copper-colored contacts or ink nozzles. Also, do not re-tape the cartridges. Doing so can result in clogs, ink failure, and bad electrical connections.
Figure : Remove the protective tape
Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
The tri-color cartridge () goes in the slot on the left
The black cartridge () goes in the slot on the right
Figure : Insert the cartridge into its slot
Push the cartridge forward until it snaps into place.
Repeat these steps to insert the other cartridge, if necessary.
Figure : Install the second cartridge
Close the cartridge access door.
Figure : Close the cartridge access door
Step three: Align the printer
NOTE:Make sure that there is plain white U.S. Letter or A4 sized paper in the input tray.
Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). The printer software opens.
NOTE:You can also open the HP printer software from your computer desktop: double-click the icon for your HP printer ().
In the printer software, click Print.
Click Maintain Your Printer (). The HP Toolbox opens.
Click the Device Services tab.
Click Align Ink Cartridges, and then follow the on-screen instructions to print the alignment page.
Review the alignment page, follow the on-screen instructions to complete the alignment, and then click Done.
If these steps resolved the issue, you do not need to continue troubleshooting.
Source
Please let me know the result of your troubleshooting by responding to this post. If you I have helped you restore colour printing capabilities, feel free to give me a virtual high-five by clicking on the 'Thumbs Up' icon below.
Have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

Changing size of book

I made a medium sized book, but now want it to be larger. Is there a way to do this without having to start over and remake it??

{quote:title=LarryHN wrote:} In iPhoto '08 you can just change the size - I believe you can in 6 too {quote}
If you can do it in 6, I can't see how.
I printed it out on paper, duplicated the album, removed all the photos, created a new album, dragged in the photos, rebuilt the album and then reset the text (the printout was faster than switching back and forth between albums.)
All in all, only about 30 minutes of work,
but it could have been a right click change,
really.

Print Layout Desginer - Help

Hi experts,
My DO design as following:
ItemNo          Description               Quantity            Total Price
LineNum()    DLN1.ItemDescription   DLN1.Quantity   variable(??)
                   DLN1.Text
                   DLN1.FreeText
I have four (4) lines of item in one (1) DO, the first page is showing only 3 items and the fourth item is showing in second page. How would this happened while i still got plenty of spaces left in page 1(repetitive area)?

Check this notes
Note 921963 Displaying Text of LineType Text separately
Note 921969 Displaying Itemdetails separately
Note 918132 Display Item Details and Rows of Type Text in Printout
Note 1111518 - Reducing the size of an Area in PLD
Note 1121298 PLD_Adjust field height when there is no data in the field
862988 Tips for creating a new layout using Print Layout Designer

Hp laserjet 200. Random blank pages. Jibberish. USB not recognized.

I am posting this for a friend.
The printer is one year old. They ended up buying a new computer and the same problems happen on Windows Vista AND Windows 8.1.
Please advise!
We were away for a week. It printed strange gibberish each day we were gone. Sometimes I can turn it off and on and make it print a desired document, but other times I just have to give up. I tried to take the ipad off again to see if that would help, but I probably didn’t do that correctly. Today it is just printing blank pages. There is an error message on the computer screen asking for a certain kind of paper. That makes no sense. It printed with this paper before. Usually there is an error message on the computer screen that it does not recognize the last USB inserted. That makes no sense either. I haven’t inserted anything into a USB port. Now I just had to turn the printer off to keep it from printing blank pages.

Hi @timothypcook ,
I see that you are getting blank and gibberish print when trying to print by a USB connection. I will certainly do my best to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Printing a Configuration Report. Did it print properly?
I have provided this document with some steps to try, to see if it will resolve the issue.
Resolving Strange, Garbled or Illogical Text, Incomplete Printouts, or Missing Text or Graphics.
Download and run the Print and Scan Doctor if you are still having issues. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools
If the printer is also networked, download and install the Microsoft hotfix in Step 3 of the document.
Wireless HP Printer Prints a Partial Page or Fails to Print All Pages in Windows 8.
What were the results when you ran the Print and Scan Doctor? (did it print, any error messages)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Reports 3.0 Printouts (Text Mode)

1) We have been trying some printouts from the reports runtime by clicking on (Report Builder 3.0.4.6.3/Developer forms 5.0) the printer icon available on the menu bar and also specifying the appropriate print properties in the
print dialogue box and the print out is satisfactory (dot matrix printer
/generic text).Of late we have been trying to HIGHLIGHT some portion of the printed text in BOLD STYLE by using the printer code before/after property
of the respective text items but we have not been successful in getting the
desired output.Hence pl.clear us on the above aspects.Our requirement is
printed text should be in BOLD STYLE for selected fields in the generic text
printer.
2) Our second requirement is we want to try printing pre-Printed cheque leaves(continous stationery) from the reports runtime by clicking on (Report Builder 3.0.4.6.3/Developer forms 5.0) the printer icon available on the menu bar using (dot matrix printer/generic text).

hello,
1) NO ... delimited was not available in reports 3.x
2) good question. not really. the file is a text file and excel
is "too intelligent" to be mislead by only changing the
extension ;-) you might be able to code something in excel
itself.
regards,
the oracle reports team --pw

Header Text in PO Printout

Dear Team,
I have an issue with a Purchase order Printouts.
All PO Printouts for the new document type created are missing with Header text items.
But other document types in PO doesnt have this issue.
Your immedaiate assistance is apperciated.
Thanks
Zulfikar

are u using std print program or ur z developed
chek if u have done settng for ur document type
spro == mm== purchasing == message == test for messages == Define Texts for Purchase Order
i dont know if this will help or not

P.O texts in printout

Similar Messages

Maybe you are looking for