Package LOAD INFOPROVIDER, Select input ENTITY

Hye.
I'm using LOAD INFOPROVIDER package and I would like to usu SELECTINPUT for ENTITY.
I know that I can introduce the Entity selected in the Transformation File in SELECTION propertie (ej: SELECTION=ENTITY,E00089) but i would like to usu SELECTINPUT in the package.
I unclude the next codigo in the package but It doesn´t work. I think that SELECTION is not a properties of this packages.
TASK(/CPMB/INFOPROVIDER_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/APPEND_LOAD,SELECTION,%SELECTION%)
Any idea?
Can i use %SELECTION% variable in the Transformation File properties (e: SELECTION = ENTITY,%SELECTION%)

Hi,
The Variable %SELECTION% in a data manager package is used to set to the property SELECTION in the RUNLOGIC of the process chain.
Which inturn helps in setting the scope for the Script Logic connected to that process chain.
If you are checking the process chain for Load Info Provider you dont have any process for Logic execution and in this case you dont have any option for setting some variable and sending it to transformation file. As transformation file itself is a variable got from the user prompt in the package.
Hope this helps,
Regards,
G.Vijaya Kumar

Similar Messages

Excel Macro that executes package Load Infoprovider with parameters in code

Hi everybody,
Is it possible to create a macro in Excel that executes the package 'Load Infoprovider', and all the parameters (Infocube, Transformation file, ... ) are written in the code of the macro?
If it is so, do you have some example that I can use?
Thanks in advance,
Albert

Hi Albert,
There is a MNU function which is used to run a particular DM package. Please go to the below site and refer to the MNU_eDATA_SELECTPACKAGE command.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f7/715647fa774763827084cd28ef3aff/content.htm
Hope this helps.

Error in BPC Load infoprovider Package

Hi,
We upgraded BPC netweaver 7 to version 7.5.When we are trying to load the data from BI cube to BPC cube by using Load Infoprovider Package we got error.Please find the Error details below
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=YBPC_C12
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\Transformation.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Cannot find document/directory
Application: CONSOLIDATION Package status: ERROR
I request you to guide to clear the issue
Thanks
Mahesh

Hi Mahesh,
Usually with loads from BI you don't need conversions, so i'd suggest you delete that reference to conversion file unless you have something in it.
If you put something in the conversion file that verify that this file located at the path you specified in your Transformation file.
Hope this helps.
Gersh

Error in BPC Load infoprovider Package after upgraded BPC NW 7 to 7.5

Hi,
We upgraded BPC netweaver 7 to version 7.5.When we are trying to load the data from BI cube to BPC cube by using Load Infoprovider Package we got error.Please find the Error details below
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
Selection
InforProvide=ZBPC_IG
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\INFOCUBE_DATA_TRANS.XLS
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= Yes
Messages
Task name CONVERT:
No 1 Round:
Cannot find document/directory
Application: CONSOL_IGAAP Package status: ERROR
I request you to guide to clear the issue
Other information
1. We are currently working in BPC 7.5NW SP04.
2. The problem occured while validating data to be uploaded from
Infoprovider.
3. We required to upload data from BI Infoprovider (ZBPC_IG) to BPC
Application.
Thanks
Vikas

Thanx
We upgrade BPC NW SP04.... I check my transformation file its ok because same transformation file file working in production on BPC 7.0 NW.
Regards
Vikash

Enhancing package 'load transactional data for BW infoprovider UI'

Dear,
for project reasons, we would like to enhance the package ''load transactional data for BW infoprovider UI'. To be more precisely, we want to add some dimensions to the method of data transfer 'replace & clear datavalues'. Now the system clears the data that mirror each entity/category/time/datasource. With only those dimensions, we cannot be precise enought, so in our case the system clears too many data. We want to be able to extend this with some dimensions.
Is there any way this can be adapted ?
thx.

Hi Wouter,
for a more precise delete you should execute first a clear and after import using Merge option.
Kind regards
Roberto

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Package loading error

Hi guys and girls
I have develoed sim toolkit applet to send sms,its complied sucessfully and also converted successfully.But when i am loding this applet to
java card its giving error like this:
[b]error:package loading failed !
loading ended with error:loading process failed1 !
i am using simera 3 classic323 vodafone javacard.
any suggestions will be highly appriciated.

Hi,
The selection condition is only planning version 700. There is no other selection conditions.
I checked the process monitor and I can only find error messages Time Period Invalid and Errors in Source system. This error messages are not enough for trouble shooting.
thanks and regards
Murugesan

Package Load Failure VS 2008 Architect & 11.1.0.6.20

I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
Package Load Failure
Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
Any suggestions on getting this to work?

I started visual studio with logging turned on. Here are the results from the log file:
<entry>
<record>60</record>
<time>2008/01/18 19:14:09.974</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>61</record>
<time>2008/01/18 19:14:11.026</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>62</record>
<time>2008/01/18 19:14:11.056</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>63</record>
<time>2008/01/18 19:14:16.273</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>
<entry>
<record>64</record>
<time>2008/01/18 19:14:16.313</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>

Package load Failed! Invalid package Title, manifest file cannot be found

Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AM

Hi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian

Package Load Failure message in VS 2005 and Error: WIJ 20002

After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
Package Load Failure
Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
"The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
The Java version I have is 6 and I checked the Universe is not locked.
Need help to identify the cause for both errors.

Try the following as posted on another forum:
Two solutions:
1. -Go in to the Tools menu in .NET, and choose Import and Export Settings.
- From the dialogue box, choose Reset All Settings and follow the steps
2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
Regards,
Jonathan

Hi ,i want provide a input help for a Selection input field

Hi Experts,
I want to provide a input help for field in selection-screen ,
this field is non primary key Custom Table(Z) selection input field .
how we can get ,f4 help for this field.
how to get f4 help Suppose field Link s_mtart-low,s_mtart-high,
What are the function moduled available for this >
Thanks in Advance.
Regards,
Hitu.

Hi,
refer to below code.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-low.
**//To provide F4 help to S_USNAM-LOW
PERFORM f_f4help_usnam USING 'S_USNAM-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_usnam-high.
**//To provide F4 help to S_USNAM-HIGH
PERFORM f_f4help_usnam USING 'S_USNAM-HIGH'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-low.
**//To provide F4 help to S_WBS-LOW
PERFORM f_f4help_wbs USING 'S_WBS-LOW'.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_wbs-high.
**//To provide F4 help to S_WBS-HIGH
PERFORM f_f4help_wbs USING 'S_WBS-HIGH'.
*&      Form f_f4help_usnam
    To provide F4 help to username
     -->P_0019   text
*FORM f_f4help_usnam USING    value(p_0019) TYPE any.
**// To retrieve username from mkpf.
SELECT bname
        FROM usr01
        INTO TABLE it_usnam.
SORT: it_usnam BY usnam.
DELETE ADJACENT DUPLICATES FROM it_usnam COMPARING usnam.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield            = c_retusnam
PVALKEY                = ' '
    dynpprog              = c_dynpprog
    dynpnr                = c_dynpnr
     dynprofield          = p_0019
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org            = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab           = it_usnam
    field_tab            = it_usnam.
return_tab             = l_it_ret
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_usnam
*&      Form f_f4help_wbs
    To create F4 help for wbs element
     -->P_0039   text
*FORM f_f4help_wbs USING    value(p_0039) TYPE any.
**// To retrive wbs element from mseg
SELECT pspel
        FROM pspl
        INTO TABLE it_wbs.
SORT:it_wbs   BY wbs.
DELETE ADJACENT DUPLICATES FROM it_wbs COMPARING wbs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
DDIC_STRUCTURE         = ' '
     retfield               = c_retwbs
PVALKEY                = ' '
   dynpprog               = c_dynpprog
   dynpnr                 = c_dynpnr
    dynprofield            = p_0039
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
    value_org              = c_s
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
   TABLES
     value_tab              = it_wbs
FIELD_TAB              =
return_tab             = l_it_ret1
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*ENDFORM.                    " f_f4help_wbs

Package size in select query

Hi all,
Can any body help for how to use package size in select statemtent.
I want to seletc record in lot of 300 form 10k records.
And i am using 4.6c version and wnat to know this statement (package size) is there in 4.6c.
I know it is in 6.0.

Hi
Package size in SELECT statements
Package size can be used to retreive a spcific number of records at a time. This can be used if you
for example only want tofinish processing a limited amount of data at a time due to lack of memory.
The exampel below read 50 records at a time from VBAK into an internal table, and selects the
corresponding entries from vbap into an internal table. Then the two internal tables can be
processed, and the next 50 records from VBAk can be read. remeber to reinitialize tha tables before
the next read.
Note the usage of SELECT - ENDSELECT !
REPORT z_test                        .
TYPES:
BEGIN OF t_vbak,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
END OF t_vbak,
BEGIN OF t_vbap,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
meins LIKE vbap-meins,
END OF t_vbap,
BEGIN OF t_report,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
meins LIKE vbap-meins,
END OF t_report.
DATA:
li_vbak   TYPE t_vbak OCCURS 0,
l_vbak    TYPE t_vbak,
li_vbap   TYPE t_vbap OCCURS 0,
l_vbap    TYPE t_vbap,
li_report TYPE t_report OCCURS 0,
l_report TYPE t_report.
START-OF-SELECTION.
SELECT vbeln erdat
FROM vbak
INTO TABLE li_vbak PACKAGE SIZE 50.
SELECT posnr matnr meins
FROM vbap
INTO TABLE li_vbap
FOR ALL ENTRIES IN li_vbak
WHERE vbeln = li_vbak-vbeln.
IF sy-subrc = 0.
Now you have the two internal tables li_vbak and liÆ_vbap filled with data.
Do something with the data - remember to reinitialize internal tables
ENDIF.
ENDSELECT.
All of the product names here are trademarks of their respective companies. The site
www.allsaplinks.com no way affiliated with SAP AG. We have made every effort for the content
integrity. Information used on this site is at your own risk.
          +
REWARD IF USEFULL+

Selection inputs in report designer

Hello Friends,
Need some help .
I am currently working on BI7 and there is one requierment for Report Designer.
Actaully user is looking for the selection creteria after execution of the report like
I have executed the report designer application with the company code 5060 ,
then I should be able to the see the selection creteria , where as I am able to see the data.
In this case ,I am able to see the data but could not guess that what was the my selection creterai like we get in Bex Query or in Bex Anaylyzer.
So please let me know how can we check the selection input which we have given or how can we display selection input in Report designer ?
Is there any specific settion , please advice .
Thanks in advance.
Regards

Hi,
all the values in a selection screen are variables, and in the report designer is't possible to add the variables of a query, so I think it must be possible to add your selection.
But this is only possible if you first execute the report to the web and not directly to PDF...
First add a report section with different rows and columns, and then drag and drop the variables...
Greatz
Joke

Selection input should display in report designer

Hello Friends,
Need some help .
I am currently working on BI7 and there is one requierment for Report Designer.
Actaully user is looking for the selection creteria after execution of the report like
I have executed the report designer application with the company code 5060 ,
then I should be able to the see the selection creteria , where as I am able to see the data.
In this case ,I am able to see the data but could not guess that what was the my selection creterai like we get in Bex Query or in Bex Anaylyzer.
So please let me know how can we check the selection input which we have given or how can we display selection input in Report designer ?
Is there any specific settion , please advice .
Thanks in advance.
Regards

thanks Ajeet ,
But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
Thnks . please advice.
Regards

Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.

Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Package LOAD INFOPROVIDER, Select input ENTITY

Similar Messages

Maybe you are looking for