Package Update on DP's in SCCM site Hierarchy

We have central site and couple of Primary sites ( SCCM 2007 R2)
I get confused sometime with adding DP to applications.
In our case the package (source files) are located on the the Central site server .
And all the packages are created on the central site. Once the package is created at central site -- the package afyer sometime shows up at the Primary sites.
However the DP is not added .
I then go to my Primary Site console and add our local DP to the package .
Does anyone know what happens if the Source files change in the package and i need to update the DP at my primary site .
I couldn't update the Package on the primary site as the option shows as greyed out.
Also what is the way i could update the Package from Central site , somehow it only lets me update all DP's and not let me chooose one the one i need to update the package on.

Do you mean you want to send the package to selected Distribution Points?
Have you tried the option "Manage Distribution Points" rather than "Update Distribution Points"
http://technet.microsoft.com/en-us/library/bb632672.aspx

Similar Messages

Identify where to install SCOM Agent on SCCM Site hierarchy.

Hello..
We have a SCCM Site environment where there is one CAS site, other 5 Primary site servers and one DB server .All are in different machines (7 VMs).i need to monitor complete SCCM site hierarchy.Next on which machines i need to install SCOM Agent on both CAS
and all Primary Site Server.
Thanks
RICHA KM

Hi RICHA,
Hope it helps:
http://blogs.technet.com/b/kevinholman/archive/2012/12/11/monitoring-configmgr-2012-with-opsmgr.aspx
http://blogs.catapultsystems.com/cfuller/archive/2012/01/26/opsmgr-2012-scom-and-configmgr-2012-sccm-q-a.aspx
http://msandbu.wordpress.com/2012/04/23/monitoring-sccm-2012-via-scom-2012/
Natalya

Adobe and Windows 7 Professional Service Package Updates

After Microsoft sent down the latest Service Pack update, both Adobe Photoshop CS6 and Lightroom...both of which had been running previously...now fail to initialize. The message given was: Microsoft has been alerted with this problem and will send back a solution. I called the Adobe Help desk. We proceeded to de-install everything that could be causing a conflict on the Hewett Packard HP170 running Windows 7 Professional: all adobe plug-in software, a 2nd monitor, a Wacom Intuos 4 tablet. Then we uninstalled and reinstalled both Lightroom 4.1 and Photoshop CS6 The problem continued. Repair referred the situation to "tier 2 support". That was 3 days ago.
In the meantime, I tried an experiment: Using the MSCONFIG command, I started the computer in DIAGNOSTIC STARTUP mode rather than NORMAL. Then I tried to start the previously-new download CS6 Photoshop and Lightroom 4.1. BOTH STARTED SUCCESFULLY. However, both appear now to be trial software. When I go back to Normal Startup in windows program MSCONFIG, the need to register for a trial comes up for Photoshop and Lightroom 4.1 doesn't let you save any changes.
This is not the first Service Pack upgrade/Adobe conflict I have experienced For the past year, every time Microsoft sent down a service package update, an Adobe program...usually photoshop but sometimes Premier...would stop working. In two severe cases, I took the computer to a dealer who restored the machine to pre-service-pack update points. . But with the cloud software and CS6, that really should end!
Do you have any suggestions on how to fix this problem? If not, do you have a way to get adobe to get back to me on trouble ticket 183659886?

Are you saying you installed Service Pack 1 after installing Photoshop CS6 and that stopped Photoshop working?
Because if you're just talking about Windows Update, I keep my systems up to date and no Windows updates have stopped Adobe software from working here.
I know the problem seems simple from your perspective, but apparently it's not.
That your software starts when you bring up the system in Safe Mode probably says that something else you have installed and running on that system is interfering.
Perhaps if you'll explain exactly what it is that's going wrong (when it doesn't work) with specifics, some folks here might be able to help you. It might be as simple as Windows Update delivering a bum display driver, which you could override yourself by going to the web site of the maker of your video card.
Do you know how to read the Windows event logs?
-Noel

HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected]

How to get changes of a custom PL/SQL package updated in ISG?

Hi All,
I need some help on how to change a custom PL/SQL package in ISG integration repository:
I already uploaded my custom PL/SQL package to the integration repositoy some time ago. Now I have made some changes to PL/SQL record/table types defined in the package (added some fields and removed some others). These changed record/table types are used by a procedure I already uploaded to the integration repository. When regenerating the WSDL for my PL/SQL package in integration repository I get an error that the wrapper for respective procedure can't be found. When checking up the SQL types that were automatically generated (by JPublisher) for corresponding PL/SQL types, these generated SQL types are invalid...
So it seems that in one case JPublisher generated an empty SQL type (with no attributes). In another case JPublisher generated the SQL type with old attribute list, so it didn't adopt the changes of corresponding PL/SQL type in the package...
Can anybody tell me how to get the changes of a cusotm PL/SQL package updated in ISG? Or is there any possibility to first remove a whole PL/SQL package from the ISG integration repository (and getting rid of all old automatically generated SQL types), so that I can newly upload my PL/SQL package afterwards?
Thanks
Konrad
Edited by: Konrad on 24.10.2011 10:51

Thanks Daniel, for your reply...
(-> for info: I'm a colleague of Konrad...)
Yes, we used a higher version number - and the upload of iLDT file works fine...
But, the problem occured when generating the WSDL...
However, I think we have found an approach of how to get the changes of a custom PL/SQL package updated correctly in ISG:
1. Save a copy of PL/SQL package and then delete it in the database
2. Regenerate the WSDL for PL/SQL package in ISG (seems that all atutomatically generated JPub wrappers and SQL types are also deleted)
3. Restart all processes
4. Create the changed version of PL/SQL package in the database again
5. upload of iLDT
6. Regenerate the WSDL for PL/SQL package in ISG
Best Regards
Carolin

A bug in Fire Fox's update that is conflicting with PLESK site builder

I asked AISO.net support for help because when I opened the PLESK Site-builder to edit my website, all I saw was HTML code instead of the WYSIWYG editor. They replied: Try using Internet Explorer as the site builder is optimized for that browser. It appears there is a bug in Fire Fox's update that is conflicting with the site builder program.
Until fire fox addresses this issue you will need to use another browser.
I want to use FIREFOX! Thanks, Janet

Yes, there is a solution for this, made by Apple. Unfortunately nobody here is allowed to tell you what that is. Rules.
But you can find the solution here:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=106513

Cron.daily scripts ran multiple times since cron package update

Since cron package update I get a weird behaviour with cron.daily scripts. Indeed these scripts are executed multiple times, which is somewhat annoying for big backup.
I added this little script in cron.daily to show this :
#!/bin/bash
# Test cron
date >> /var/log/date_cron
And I get this :
Mon Feb 22 11:27:53 CET 2010
Tue Feb 23 11:27:13 CET 2010
Tue Feb 23 11:37:16 CET 2010
Tue Feb 23 11:44:45 CET 2010
Wed Feb 24 12:05:08 CET 2010
Wed Feb 24 12:15:59 CET 2010
Wed Feb 24 12:22:59 CET 2010
Thu Feb 25 12:24:32 CET 2010
Thu Feb 25 12:31:49 CET 2010
Thu Feb 25 12:35:01 CET 2010
Thu Feb 25 12:45:30 CET 2010
Fri Feb 26 12:44:37 CET 2010
Fri Feb 26 12:52:56 CET 2010
Fri Feb 26 13:02:18 CET 2010
Sat Feb 27 13:04:10 CET 2010
Sat Feb 27 13:13:50 CET 2010
Sat Feb 27 13:22:06 CET 2010
Sat Feb 27 13:28:49 CET 2010
Sun Feb 28 13:29:49 CET 2010
Sun Feb 28 13:35:19 CET 2010
Sun Feb 28 13:44:18 CET 2010
Sun Feb 28 13:49:52 CET 2010
Mon Mar 1 13:38:06 CET 2010
Mon Mar 1 13:47:02 CET 2010
Mon Mar 1 13:55:55 CET 2010
Tue Mar 2 13:58:21 CET 2010
Tue Mar 2 14:01:56 CET 2010
Tue Mar 2 14:08:14 CET 2010
Wed Mar 3 14:06:35 CET 2010
Wed Mar 3 14:15:44 CET 2010
Wed Mar 3 14:24:24 CET 2010
Thu Mar 4 14:25:04 CET 2010
Thu Mar 4 14:33:16 CET 2010
Thu Mar 4 14:41:33 CET 2010
Fri Mar 5 14:43:35 CET 2010
Fri Mar 5 14:47:05 CET 2010
Fri Mar 5 14:53:14 CET 2010
Sat Mar 6 14:53:32 CET 2010
Sat Mar 6 14:58:50 CET 2010
Sat Mar 6 15:04:18 CET 2010
Sun Mar 7 14:58:30 CET 2010
Sun Mar 7 14:58:30 CET 2010
Sun Mar 7 15:09:07 CET 2010
Sun Mar 7 15:13:29 CET 2010
Mon Mar 8 15:12:19 CET 2010
Mon Mar 8 15:12:19 CET 2010
Mon Mar 8 15:20:50 CET 2010
Tue Mar 9 15:24:35 CET 2010
Tue Mar 9 15:24:35 CET 2010
Tue Mar 9 15:31:58 CET 2010
We can see that the script is executed three times a day instead of one.
Here is /var/spool/cron/root :
# root crontab
# DO NOT EDIT THIS FILE MANUALLY! USE crontab -e INSTEAD
# man 1 crontab for acceptable formats:
# <minute> <hour> <day> <month> <dow> <tags and command>
# <@freq> <tags and command>
# SYSTEM DAILY/WEEKLY/... FOLDERS
@hourly ID=sys-hourly /usr/sbin/run-cron /etc/cron.hourly
@daily ID=sys-daily /usr/sbin/run-cron /etc/cron.daily
@weekly ID=sys-weekly /usr/sbin/run-cron /etc/cron.weekly
@monthly ID=sys-monthly /usr/sbin/run-cron /etc/cron.monthly
How can I restore the wanted behaviour ?

Svenstaro wrote:This bug still appears. Is dcron still being worked on?
$ crontab -l
# DO NOT EDIT THIS FILE MANUALLY!! USE crontab -e INSTEAD.
# <minute> <hour> <day> <month> <dow> <command>
0 0 1 1 * /usr/bin/update_dcron
uh-oh

I'm trying to update my payment info. and the site won't let me.

I'm trying to update my payment info and your site won't let me!

Is sound working in other applications, such as Safari? Is the iTunes volume slider all the way on the right?

How can I display Task's "Resent Changes" or "Updates" or "History" in the project site

Hello,
When a task is assigned to a team member, the team member may keep sending frequent updates "Status" for the task to the approving whenever he finishes anything in the task. These updates can be shown in the Task Details (in PWA).
My question is, how can I display the Task's "Resent Changes" or "Updates" or "History" in the project site, so ALL the team member can see the "Progress" of that task?
Thanks

Hi,
I'm not sure it is relevant that all team members see all task updates through the project site. It will be a lot of information that might not be relevant and could generate confusion.
Instead of this, I'd suggest to share the project schedule through the project site with regular baselines and eventually to review task update/approval with team members in PWA during a weekly status meeting.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

RME 4.0.6 Device Package update failure

Hi,
i have downloaded a lot of new device packages for the RME 4.0.6. If i install this packages i get the following error message.
Installation failed for product [Resource Manager Essentials] with message : com.cisco.nm.xms.psu.packagemgmt.InstallerException: Repository in use.
Another Package Support Updater client session may be modifying device support.
I searched for the psu.lock file but i couldn't find this file. How can i fix this without reinstalling the lms?
AndrÃ©

Hi,
i have attached the psu.log file. There is no .lock file, i've checked this again. I tried again to update the device packages
After 1 hour i stopped the update.( normaly an update take max. 10 minutes. During the device package update i could see the the psu.log file was going into a loop. It starts at 0 kbytes -> growing to nearly 950kbytes and than it starts again at 0 kbytes
Andre

LMS 4.2 fails Device Package Update

Hallo,
Device Package Update fails with this error:
Error while downloading package information from Cisco.com for the selected products. See the d:/CSCOpx/log/psu.log file for details.
PSU.log shows:
ERROR [RemoteRepSync : downloadPsuHeadersAsXml] : VDSException thrown com.cisco.nm.xms.vds.VDSException: CcoDownloadAdapter::getXmlFileList():IOException:connect timed out
best regards
Alex

What is the exact model of 3850 switch you're trying to monitor?
Following are the supported models :
Device Name
sysObjectID
Supported Software Version
Support Type
Device Name
sysObjectID
Supported Software Version
Support Type
Cisco Catalyst 3850-48P-E Switch
1.3.6.1.4.1.9.1.1641
Device Update
Cisco Catalyst 3850-48P-S Switch
1.3.6.1.4.1.9.1.1643
Device Update
Cisco Catalyst 3850-24P-E Switch
1.3.6.1.4.1.9.1.1642
Device Update
Cisco Catalyst 3850-24P-S Switch
1.3.6.1.4.1.9.1.1644
Device Update
Cisco Catalyst 3850-24U-E Switch
1.3.6.1.4.1.9.1.1767
03.11.35.EMP
Device Update
Cisco Catalyst 3850-48U-E Switch
1.3.6.1.4.1.9.1.1768
03.11.35.EMP
Device Update
If it is 3850-24p-L, it can be :
CSCuj61704 No support for 3850-24p-L in LMS 4.2.3
Try updating your mdf device package as well. Device package for Common Services.
For current Nexus device package issue, each device package is not individual, but has some dependant packages. Without which they are tend to fail during installation check.
You can select all the available device packages and try to install. It seems you dont have SharedDcmaIOS (3.1.7) installed and hence the package is failng due to pre-requisite.
You have to install each package which fails which consistancy check on other packages.
For mdf package update, you can select common service as well and check for update.
There may be some 3850 device packages already available, please share output of following command for us to see :
NMSROOT/bin/psucli -p rme -q -all
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

SCCM 2012 hierarchy CAS is down will primary sites work

hi all
SCCM 2012 hierarchy CAS is down will primary sites work and if primary site down will secondary sites work
can anyone explain this, how CAS Down will affect the functionality of other primary sites or we can still manage the clients with primary site without any problem.

Hi,
if your CAS is down, you can still work with your primary site. You will get into replication trouble and even loose data after an offline time longer than 14 days. If you know that your offline time will be shorter than those 14 days, you will not get into
trouble. This 14 day duration needs to be configured, I think the default value was 5 days.
if you have a secondary sites and loose the connection to the primary, you are not able to manage the secondary sites since the SCCM console is only connectable to primary sites and CAS. The MP on your secondary will still collect client data which will
be transmitted to the primary after an reconnect.
Regards
Thomas

SMP 2.2 Deployment of package (update) problem in SCC

Hi everybody,
Hope you can help. I'm currently working on some updates of a mobile application. The changes on the frontend and backend work ok. The problem lies in the update of the Sybase part. We already have a complete environment up and running and that works ok. I recently changed one of the structures of the bapi's which lay behind a MBO. I've refreshed the MBO and I see the new attributes in the workspace.
The second step is to build the package. This works as well.
The third step is to make sure the structure changes are also present in the backend system (QAS). This works ok.
The fourth step is to deploy it in our QAS domain of the SUP server using SCC. I follow the normal steps to update the Package and than the trouble starts. It says it failed to update the current package and provides me with the following errors (I've reduced it to the essential ones):
2014-03-05 09:11:31.023 Subsystem=Error,Application ID=,Application Connection ID=,User=,Correlation ID=,Package=,Root Context ID=,Transaction ID=,MBO=,Operation=,Thread ID=679,Node ID=SUP01,Error=DataServices: deploys intersect, not allowed with mode UPDATE.
And the following related to the newly added attributes:
2014-03-05 09:11:31.014 Subsystem=Error,Application ID=,Application Connection ID=,User=,Correlation ID=,Package=,Root Context ID=,Transaction ID=,MBO=,Operation=,Thread ID=679,Node ID=SUP01,Error=Column "XYZ" :new attribute
And
2014-03-05 09:11:31.014 Subsystem=Error,Application ID=,Application Connection ID=,User=,Correlation ID=,Package=,Root Context ID=,Transaction ID=,MBO=,Operation=,Thread ID=679,Node ID=SUP01,Error=DataServices: MBO: "Inspections" Column "XYZ" :new attribute.
And
2014-03-05 09:11:31.013 Subsystem=Error,Application ID=,Application Connection ID=,User=,Correlation ID=,Package=,Root Context ID=,Transaction ID=,MBO=,Operation=,Thread ID=679,Node ID=SUP01,Error=Columns Conflict
The problem is that the programmer who did al this is not available. I have a guide which I was following to the letter but somehow this doesn't work anymore. Documentation of sybase does not provide information about these errors (as far as I could find).
Hope you can help!
Cheers!
Laurens

I found the following in the documentation. Do I interpret it correctly by saying that adding attributes would result in errors?
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0213/doc/html/fre1321910988667.html
Supported Changes for Update Deployment
Understand package changes supported by an Update deployment.
Allowed package updates include:
Adding MBOs to a new synchronization group
Changing the Cache Policy
Adding or removing Result Set Filters
Adding or removing Result Checkers
Adding operation parameters with default values
Adding or removing a logical role
During deployment, multiple messages may be returned via the ProgressMonitor, which display in the Error Log view in Unwired WorkSpace. Verification does not halt if an error is detected, it continues to log all relevant error messages. When deploying a package in Update mode where an existing version of that package is deployed, deployment fails verification and returns an error if it "breaks" the existing application.
Detailed messages returned from Unwired Server for an Update deployment indicating what the update consists of includes:
MBO: {MBOName} Column {name} :new attribute
Columns Conflict in MBO {MBOName} different nodes
Schema validation messages returned from Unwired Server if an Update deployment fails include:
Deploys intersect, not allowed with mode UPDATE
Cannot Merge Documents. Name or version does not match

[SOLVED] Question about package updates and ABS

Hello,
I have manually compile my kernel in order to apply a patch my laptop needs to suspend. So I use abs and customize the pkgbuild. A few days ago when the update for kernel26-2.6.33.3-2 came out, I thought I'd just refresh abs, rebuild, and then I'd be up to date. But instead now pacman -Syu tells me that there is still an update for the kernel.
Does building from ABS not get you the latest package update?
Also, what exactly is the package update compared to a software update? I'm guessing that it is an arch only update to the package but the software itself is the same version. Or am I totally off?
Thanks for the help!
Last edited by Fingel (2010-05-12 03:42:38)

When building via ABS, the package installed gets its version from the PKGBUILD ($pkgver-$pkgrel). Pacman just looks at available version vs installed version to tell if you should upgrade.
Your abs tree was probably just not up to date; just because pacman -Syu says your mirror has a package, doesn't mean building via abs _at that moment_ will get that version.
Be sure to run `abs` to update your tree, then when you're editing the PKGBUILD, check which version it's building. In some cases, you can simply increment those numbers right in the PKGBUILD before building as source files are often fetched based on those variables, etc. -- but I don't know if I'd recommend that when building something like the kernel.
Last edited by brisbin33 (2010-05-11 17:08:12)

Updating Templates w/o creating new site.

Hello everyone, My names Mike and it seems I am the latest
n00b to this forum board but have come here many times to search
for information.
I have something to ask you guys that I haven't found any
useful information for as of yet. I am currently using DW MX2004
v7.0. I have to update about... 300+ sites copyright dates from
200x to 2006. (it's a slow week here haha) Here is my question, I
tried updating the templates for these sites by just opening there
template page by browsing through windows then opening the .dwt
file(s) for the site and/or the .ascx files for aspx sites...
(which do update). The .dwt files do NOT update due to not
opening/creating a new site directory in dreamweaver. I have looked
around for several different ways to possibly get around this but
have not found a way to do it.
If someone has a way to update these templates without
creating a new site for every page it would save me a great deal of
time...
Thanks in advance!
Mike

We are using javascript for any new sites that are coming in
to avoid this in the future. most of the sites I am updating now
are several years old. All high priority sites such as the maryland
zoo.org and so forth have been changed over.
We are starting to get a lot of redesigns coming in too from
some of these 3 to 4 year old sites.
This field is crazy. I have been doing this job for over 1/2
year now and have gotten fulltime status. No matter how much I
learn I just see how much more I don't know about things... great
industry to be in though I love it.
Thanks for your help. I will have to spend some time at home
and go through some of the post on here to get better aquainted
with everything.
Later!
Mike

Package Update on DP's in SCCM site Hierarchy

Similar Messages

Maybe you are looking for