Page break in between group and subreport

I have created a report with one group based on the customer order number.   We want the user to be able to run a range of customers orders. For example, print 10 customer orders at one time. The group pulls the required information for each
customer order.   After each customer order, I have a sub-report that is a pallet pick sheet.   We want a page break after each group, so the sub-report prints on a separate page. It goes like this
customer order 137158 detail - 1st iteration of the group.
page break
sub-report pallet pick sheet for 137158 - starts on a new page.
page break
customer order 137159 detail starts on a new page. - 2nd iteration of the group.
page break
sub-report pallet pick sheet 137159 - starts a new page.
I would really appreciate if someone can help solve this issue. I've spent over half a day reading forums and trying different solutions, and every attempt at adding page breaks seems to be ignored.   I'm working with SSRS 2012.
Jeff

I had the company logo and a title outside of the data tablix.   When I moved these into the list table, the issue with the additional white space was resolved.   At this point, we have resolved the page break and the extra white space
on the report.   I have one more issue.
On the main report, I have two parameters for starting customer order number and ending customer order number.   I created the same parameters on the sub-report. When I run the report, I enter a range of 139818 to 139824.   The
main report which is the customer order information prints correctly.   However, instead of getting just the sub-report for the first order which is 139818, I get a sub report for every order in the range.   Then, the main report
prints order 139819, and then repeats the sub-report loop for every order.  So, each time the main report prints, I get 7 sub-reports.   How do I link the main report to the sub-report so there is a one to one match so only
one sub-report is generated per customer order?
I really appreciate the help,
Jeff

Similar Messages

Page break for a group and sub group based on page length

Hi
I have a requirement where in I need to develop a report which has the following requirement. I am attaching the sample xml and rtf files for reference:
1) There are 3 groups in the Data Model. G1, G2 and G3. G1 contains G2 and G2 contains G3. I need to display that data in that order in the rtf template. Pretty straight forward.
2) The tricky part, however, is that the report needs to have a page break on the following conditions:
a) When the value of col1 changes which is in G1
b) On col3 (in G2), but only when there is not enough space on the page to accommodate the values present in G3, ie col5 and col6 alongwith the values in G2. This means when the value of col3, which is present in G2, changes and if there is not enough space to accommodate G2 and G3 on the same page, it should break and start on a new page. The table which should come together is marked in grey color in the RTF template.
What I have done till now to achieve this?
I have created a parent table with two rows. In the second row I have made sure that the row doesn't break across pages. This is true for all the subsequent tables in the report. Now, in that second row, I have col1 in a nested table within a repeating group G1. Inside G1 there is a nested table for G2 and within G2 I have another table for the group G3. The row is not breaking across pages for all the tables that have been created.
I have tried all the permutations and combinations of nested tables, keeping G1, G2 and G3 in the same table but different rows, having G1 in one table and nesting G2 and G3 in another, keeping G2 and G3 in a separate table altogether, Keeping G1, G2 and G3 all of them in the separate table. All of them are apparently not working.
Is there anyway where we can either get hold of the current position of the cursor and the total number of rows on that page? Or any other solution that is possible? Or if I can have to make changes in the data model?
Thanks a lot in advance
Sid

Hello Sid,
I have checked your report and XML Sample and you haven't linked the fields from XML Sample to your .rtf report.
You can use <?for-each?> syntax for your groups to print the content.
I recommend you to review our "Creating RTF templates" manual:
http://docs.oracle.com/cd/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#BIPRD2354
Regards,
Liviu

Page break within a group(s)

I have a report that uses a group that contains three parts, a details part, a blank lines part, and a totals part.
What I am attempting to achieve, is to produce the report so that there are page breaks within this group. The page breaks should happen after each part.
I have been able to achieve the desired look by adding a group for each part, with an additional 'blank' group to provide a page break between the Details Part and the remaining 2 parts.
This, however has left me with 3 issues;
Throughout the report, there will be pages with only the heading and no details.
There are pages that show 2 headings (one for the ending detail group and the other is for successive detail group)
How to remove the headings for the blank lines part and totals part (which is now on their own separate pages)
The major pain point for me is issue #3. Anyone able to offer suggestions with the amount of information provided?

Hello,
Based on your description, you have three part in one group. You have add page break between each part. You have mentioned that the heading will repeat in each page. You have set the tablix repeat headers on each page, right?
Since you have blank line part in the group, when we add page break between each part, we will get a blank line page. When we have set the heading will repeat in each page, we would also have repeat page header in blank page.
Now, what your requirement is not get the repeat header in the blank page and total page, right? Please refer to the following steps below:
Cancel the headers repeat in each page configuration.
Add a total row before of the detail group. Change these text box values with headers values.
Please refer to the screenshot below:
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Difference between Groups and roles?

Hi All,
What is the difference between groups and roles?
Thanks for your time and help.

Oracle does not have anything called a 'group'.
A role is a named object that can contain a set of privileges. The members of the set can be individual privileges or can be another role that contains its own set of privileges. Roles can then be granted to users (or to other roles) so that those users (or roles) have the specified privileges.
See the SQL Language reference - http://docs.oracle.com/cd/B28359_01/server.111/b28286/toc.htm
Read the topics for CREATE ROLE, GRANT and REVOKE

How to easily find all the relationship between group and reports in OBIEE

Hi, All:
I am working with a production env which contains many group and reports.
I want to know if there is a quick way to export the relationship between all the group/users and all the reports/page/etc.
Thank you for the kind help.

Thanks so much !
May be you can suggest a way around what I trying to achieve. I migrated(imported) one BA from our Prod system to an R12 VIS demo system into the pre-existing APPS EUL as owner SYSADMIN. When I login as SYSADMIN I see all the workbooks(the ones that were migrated from PROD and the ones shipped with VIS). I am interested only in the Workbooks that I migrated from Prod System. There are 100's of migrated workbooks. I was thinking of creating another APPS user and grant this newly created user ADMIN privileges on the migrated BA and transfer ownership of all migrated WORKBOOK. This way when I login as the newly created user I will only see the migrated Workbooks. How do I automate the process to seperate them using SQL or otherwise
Thanks
Bismi

Only page 1 prints well. Page 2 is offset to the right and information is lost at the page break. FireFox 8 and 9, Mac OS 10.6.8

Mac OS 10.6.8 FireFox 8 and 9
If I print a web page, either just print or save as PDF, only the first page prints well. Page 2 is offset to the right such that the information is cut off at the right edge. Information is lost at the page break, several lines of text will be lost. If I need to print a page, I open Safari, which does a very nice job of formating the page for print. But I want to use FireFox. Can you help me?

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
If it does happen in both safe mode and with a new profile, please post the contents from about:support

Only page 1 prints well. Page 2 is offset to the right and information is lost at the page break. FireFox 8 and 9, Mac OS 10.5.8

This is very similar to a previous post with a later version of OS X, but the fix that worked for the original poster does not work for me.
Mac OS 10.5.8 FireFox 8 and 9. If I print a web page, either just print or save as PDF, only the first page prints well. Page 2 is offset to the right such that the information is cut off at the right edge. Information is lost at the page break, several lines of text will be lost.
I use several add-ons for work that are only on Firefox, so using another browser doesn't help much.

Somebody had a similar problem and was advised to start in safe mode or create a new profile. (Here: https://support.mozilla.org/en-US/questions/906274?s=firefox+print+first+page&r=2&e=sph&as=s). Starting in safe mode disabling all add-ons does not fix the problem for me. When I try to follow the instructions here (https://support.mozilla.org/en-US/kb/Managing-profiles) to start the profile manager, Terminal gives me an error message after I enter the line of text: "The application firefox-bin quit unexpectedly." I have tried it with and without the "-bin" (the error message is the same - just with or without the "-bin"), with a capital or lower case P at the end. Nothing works. Please help.

Page breaks in a table and table row spacing

Hello -
Anyone know how to add a page break to a long table which spans several pages ?
Also - there seems to be padding added to my text both before and after - how do I get rid of this ?
Any help much appreciated.
Andrew

andrewpndavies wrote:
Anyone know how to add a page break to a long table which spans several pages ?
No such a feature in Pages but it is the standard behaviour in Numbers so it may be a good soluce to move your document from Pages to Numbers as I often wrote (and often do).
Yvan KOENIG (from FRANCE mercredi 22 avril 2009 14:10:17)

Pages sync function between Mac and iPhone

I decided to get Pages to sync between my iPhone and my Macbook Pro because of the feature that lets me continue typing on my phone when I can't use my laptop. But I want to know if, when I make a document, does my phone need constant internet connection or does it just kind of download it to the phone and updates when I look for it on my computer?
I'm basically asking if my data bill will reflect me using this feature or can I not worry past the initial download.
Thanks

I have been doing some reading on the Apple site, and they do not explicitly state that Pages on IOS 8.1 autosaves. I have my suspicions that it does.
I don't have IOS 8.1 installed here, but a simple test can be revealing. Open the same document from iCloud drive on your phone, and on your Mac in Pages v5.5. Make changes to the document on your phone. Don't attempt to quit the application. Do the changes automatically update after a short delay on Pages v5.5? If they do, then you know that the phones network connection is utilized — likely with Wi-Fi priority over your carrier data plan.
Do not confuse iCloud Drive document availability on participating networked Apple devices as the Handoff feature. I still believe for that to automatically work, it would require Bluetooth enabled on both devices, and local proximity to one another.

Advice needed with lining up lines between parent and subreport

I have a report where the main report includes a box and 6 interior vertical lines. The box and lines start in a group header and end in a group footer. Details has several sections, and one of the sections includes a subreport (suppressed when there is no data) that crosses the interior lines. This report is used by multiple customers on a variety of printers.
Inside the subreport, there are two details sections. One detail section has a background color defined.
When the report is generated and the subreport contains data, the subreport section with the background color obscures the line defined on the main report.
We have tried to work around this behavior by adding matching lines in the detail section of the subreport, but we have been unable to get the lines within the subreport to nicely align with the lines in the main report. We'll think we get it fixed up for one printer, but then they are off on another printer.
We have turned off the background and removed the lines. This gives us a perfectly straight line, but the users really want the subreport to have alternating colors.
What other options do I have?

Non-recoverable read errors per bits read:
Value line CS: 1 in 10**14 (1.065% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-va lue-hdd/
Constellation ES2: 1 in 10**15 (0.73% annualized failure rate)
See http://www.seagate.com/em/en/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-ca pacity-3-5-hdd/
For testing whether everything works as it should, try the Passmark benchmark and Prime95 stress-test.

OS X Yosemite Pages sync problem between iPad and Macbook

I have updated my Macbook on OS X Yosemite. After update I getting problem in sync between iPad pages and iCloud.
Pages do not get sync automatically, temporary solution. I have to make sure that Macbook Pages connected to internet. After that I need to open my files on pages and have to do some fake changes like do some space. Pages again upload files from iPad and than I got updated files on my macbook.
iPad pages upload files correctly, I can confirm this because I do login in iCloud through web browser than I get files updated.
So this is the problem from macbook side (i.e. OS X Yosemite) not picking synced files from iCloud.

Hello livingthe66,
After reviewing your post, I have located an article that can help with Documents in the Cloud. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iCloud: Troubleshooting Documents in the Cloud
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Relationship between groups and their members in LDAP directory missing

I use SAP EP 6 SPS14 with one LDAP Server as data source using this flat LDAP structure:
dn: dc=example,dc=com
objectClass: dcObject
objectClass: organization
dc: example
o: example.com
dn: ou=user,dc=example,dc=com
objectClass: organizationalUnit
description: All Users
ou: user
dn: cn=Max Mustermann,ou=user,dc=example,dc=com
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: person
objectClass: top
cn: Max Mustermann
givenName: Max
sn: Mustermann
uid: 0001
userPassword:: bWF4
dn: cn=Max Meier,ou=user,dc=example,dc=com
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: person
objectClass: top
cn: Max Meier
givenName: Max
sn: Meier
uid: 0002
userPassword:: bWF4
dn: ou=groups,dc=example,dc=com
objectClass: organizationalUnit
description: All Groups
ou: groups
dn: cn=internal,ou=groups,dc=example,dc=com
objectClass: groupOfNames
objectClass: top
cn: internal
member: uid=0001,ou=user,dc=example,dc=com
dn: cn=external,ou=groups,dc=example,dc=com
objectClass: groupOfNames
objectClass: top
cn: external
member: cn=Max Meier,ou=user,dc=example,dc=com
The private section of the LDAP entry in the dataSourceConfiguration.xml looks like:
<privateSection>
               <ume.ldap.access.server_type>openLDAP</ume.ldap.access.server_type>
               <ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
               <ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
               <ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
               <ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
               <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
               <ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
               <ume.ldap.access.objectclass.user>inetOrgPerson</ume.ldap.access.objectclass.user>
               <ume.ldap.access.objectclass.uacc>inetOrgPerson</ume.ldap.access.objectclass.uacc>
               <ume.ldap.access.objectclass.grup>groupofnames</ume.ldap.access.objectclass.grup>
               <ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
               <ume.ldap.access.auxiliary_naming_attribute.user>uid</ume.ldap.access.auxiliary_naming_attribute.user>
               <ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
               <ume.ldap.access.auxiliary_naming_attribute.uacc>uid</ume.ldap.access.auxiliary_naming_attribute.uacc>
               <ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
</privateSection>
The pointers in the portal are:
User Path: ou=user,dc=example,dc=com
Group Path: ou=groups,dc=example,dc=com
If I log in as SuperUser, all users and all groups of the LDAP directory are there and I could log on as one of the LDAP provided users. But the relationship between the users and the groups, defined in the member of the objectClass groupOfNames, is missing.
Whats wrong???
Message was edited by: Holger Wohlhüter

Meanwhile I changed the GroupOfNames to GroupOfUniqueNames in the LDAP structure and solved the problem. I had to add this line: <physicalAttribute name="null"/></b> in the User mappings.
<nameSpace name="com.sap.security.core.usermanagement.relation">
     <attributes>
          <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
               <physicalAttribute name="*null*"></physicalAttribute>
          </attribute>
     </attributes>
</nameSpace>
Message was edited by: Holger Wohlhüter

Page size different between design and preview modes

When I accept the default sizes when creating a new site, the page size appears as it should in design, but then when I preview it, it appears much larger, almost a perfect square. So, what I think I'm creating in design is not what I see when I preview it. See the example below. So what I think I'm designing in Design mode is not the result I get when I preview it. Can anyone tell me why that is? Is this a setting I can modify? I've been accepting the default settings when creating a new site.
Thanks very much!
Jcaro

I have the same problem and the Turn off the "Sticky Footer" option in Site Properties. does not work my pages contain tabbed panels.

I cant get pages to sync between iPad and iPhone

I have installed pages on both devices and signed in with icloud following all of apples instructions. I have checked that icloud is set up in the pages settings, however each device just keeps its own documents on them and they don't transfer over. Please help!
Am also have the same trouble with my contacts- they are both separate and are not crossing over even though I have turned on all of the switches I can think of. It is probably something very simple but I am going mad trying to sort it as writing my masters work on pages.
My photos are photostreaming
Thanks becki

Bex,
This might not be your issue, but I had the same thing happen. In my case, I was signed in to my account through my mac.com email addy on one device & through the same account, but with me.com as the domain name. Everything else worked for me, but I could not sync devices. You said that the usernames are the same, so this doesn't sound like it's the same issue, but just I figured I'd post it here just in case.

How to break link between iWeb and web gallery?

I have created an external webpage with the use of iWeb, and I have inserted the photos widget through the web gallery which sits on my personal .Mac account (ie. different to the external website which has an independent - no mac - .com address)
I would like people to view the picture widget on the external website (a business website) I have created, but I do not want them to click on it and then be directed to my home web gallery. Basically I just want them to be able to see the rolling pictures, but nothing more.
Does anyone know how to avoid this link from working?

Hi Kodi,
As far as I know, the object link to material is part of SAP standard customer delivery. Then there is really small customer settings you have to maitain, actually the fields Destination and Web server, as the SAP never knows the name of the system, which customer will use.
Or you talk about others than the 0PLANTMATERIAL, 0PLANTMAT_LONG. If you create new object link type, the install guide 'Collaboration Projects (cProjects): Guide Impl. Object Link ' in the https://websmp105.sap-ag.de/plm-inst should give you detailded information.
Kind regards,
Zhenbo

Page break in between group and subreport

Similar Messages

Maybe you are looking for