Page tiles not showing when using Adobe Muse and Web marketing hosting

Hello
I have created a muse site that has the correct page titles showing in the browser when using the web basics hosting. But I need the same site to now contain a blog so have changed the hosting to web marketing, this has resulted in the pages not showing their page titles in the browser
Does anybody know why this is or what I can do about it?
thanks for any info
regards
Martin

Page title should not change with site plan change unless it is done manually , or if modified file is uploaded from Muse.
Please check the titles added on page if they exist or not, if still same issue , provide the site url.
Thanks,
Sanjit

Similar Messages

Using Adobe Muse and Business Catalyst ... which level of hosting do I need so my customer can use i

Using Adobe Muse and Business Catalyst ... which level of hosting do I need so my customer can use in-browser editing?
thx,
Gary

Adobe Muse has an update on 17 June which will allow the use of ICE on BC you may whish to check you infomation Liam....! The link below shows the updates for Muse coming in June!
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-parallax-scrolling-may-2013/

Create and send EDM using Adobe MUSE and Business Catalyst.

There is just one thing missing in my armour as a graphic designer – creating and sending EDMs.
Given the success of creating websites using Adobe Muse, an EDM functionality would be a fantastic addition to MUSE and Business Catalyst (BC). Imagine this:
1. I open Adobe Muse.
2. I select "New EDM" (instead of "New Site").
3. I design and build my EDM to spec.
4. I test my EDM using 'Preview' or a single send to myself.
5. I publish my EDM to Business Catalyst.
6. In BC, I review my EDM and add 'FROM NAME', 'FROM EMAIL ADDRESS' and 'SUBJECT'.
7. I import my database.
8. I hit SEND!
After my EDM has gone out, I can review a report in BC - just like any report for a website.
As a designer that does not know code but can build a website using MUSE - creating an EDM is the one thing I can't personally offer. Using a digital supplier can be expensive and website like Mail Chimp aren't professional enough.
To the Adobe Muse team, please – for the love of humanity – consider this as viable addition to MUSE. You will save a lot of heart ache and win a lot of hearts.
Thanks,
Phil

Done!
See here: Create and send EDM using Adobe MUSE and Business Catalyst.

Where are my designs stored when using Adobe CC and can i access them if i cancel ?

where are my designs stored when using Adobe CC and can i access them if i cancel ?

This is answered in the CC FAQ: http://www.adobe.com/products/creativecloud/faq.html

Recommended hardware configuration when using Adobe Illustrator and Photoshop

Hello!
I am an Illustrator who uses Adobe Illustrator and Photoshop most of the time. Today I am using Adobe CS5.5 suite and is thinking of getting the Adobe CC. As my computer today is abit old and "tired", I am unsure about what to focus on when updating my hardware?
I am using today a HP workstation with following hardware:
Software:
Windows 7
Adobe Creative Suite CS5.5
Hardware:
Processor:              Intel i7-2600 3,4GHz
Internal memory:     8,00 GB DDR3
Disc drive:               500GB SATA disk 7200rpm
Graphics card:        NVIDIA GeForce GT 1GB
Since I work both with Technical Illustrations with loads of anchor points in Adobe Illustrator, I get sometimes error messages like "Out of memory" and such. I read about having two discs, one system disc and one work folder disc, that would solve that problem. But I am also working alot with large illustrations for comercial and advertising situations and I feel that it tend to get a bit slow, especially when I add gradients and blendmodes to an illustration.
So If I could get som recomendations of what to focus on to boots the speed in my system, also taking into account that my budget is somewhat small, I would really appreciate it!
Best regards
Ulf

I have similar setup to yours.
From my point of view you need more RAM. I have 16GB. Than you will need to change in preferences to adjust memory used by PS and Illustrator. Maybe take a look at virtual memory in Windows and disable aero effects.
Disk. It is better to have one disk for system (eg.SSD) and one for documents. But don't buy something like WD Green series that is intended for backup.
Graphics. It is not a major player I think for your tasks, but OpenGl can speed up rendering in Photoshop and Illustrator.
When exporting AI with layers to PSD it will always show "out of memory" unless you turn off anti aliasing.
and the most important thing reinstall Windows after some time... It will work faster.

Not Allowed to use Adobe Muse in Creative Cloud trial

I previously had a month-to-month Adobe Muse subscription and just started the Creative Cloud Trial. Because i had canceled my month-to-month subscription, the Muse application will not let me open files unless I renew my subscription - even though I now have a 1-month trial of Creative Cloud. Is there any way to resolve this so that I can use Muse with this one month trial?
Thanks in advance

You will not be able to use Muse as a 30 day trial since you already had a month-to-month subscription of Muse.
From the Creative Cloud FAQ here http://www.adobe.com/products/creativecloud/faq.html under General Information:
If I decide to stop my membership, will I still be able to use my Creative Suite software and the other components of Creative Cloud?
When you cancel a month-to-month or annual membership purchased directly from Adobe or let a 3- or 12-month prepaid membership purchased from a retailer expire, you will no longer have access to the CS applications, other desktop software, and services that are components of Creative Cloud. However, if you saved your work to your computer, you will continue to have access to those files. You will also have access to the same benefits as a free Creative Cloud member, which include 2GB of storage space (reduced from 20GB), the ability to sync and store your files, access to a free 30-day trial of the desktop software that has not already been installed and provisioned as part of your paid membership, and access to the free level of services included with Creative Cloud.

Pivot table total on a computed column not showing when using a filter

I have this strange issue. I will try to explain.
I have three columns in my report - Delivered Qty, Opened Quantity, and the third one is computed that is (Delivered Qty - Opened Qty). The data is displayed in a table by quarter. So basically I have Quarter, Delivered Qty, Open Qty, Not Opened Qty. I also have the total row. A pie chart shows the opened vs. un-opened quantities. It all works fine.
The issue is when I add a prompt and the corresponding filter, the total for the computed field is blank. This happens whether it is pivot table or a regular table. That causes the pie chart to show 100% for the Opened qty.
When I remove the filter, it works again. I can see the total for the computed field and the pie chart looks great.
Can anyone please help me? I have a number of hours trying to play around with this and also looked in the forum to see if any one might have already discussed similar issue in the past. I could not find any.
Thanks.

I found the issue with my table total not showing up. Basically the new materialized view had its own data table alias. However, in the filter I was using date columns from different date table alias (copy and paste problem). As soon as I changed to the right date columns from the associated alias table, the row total showed up.
Thanks anyways for your support.

Error when using Adobe form in Web Dynpro..

I created an adobe form and gave the form name in template source property of interactive form in web dynpro component.The context node used in that form is automatically created. I pass value to that node using set_static_attributes. When I run the application I am getting an error msg 'Node <node name> does not contain any elements'.Can someone tell me how to solve this problem?

Dear friend,
Check the Below link
https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3

The Index page will not show the title with Bookmarking and the Facebook "like" or "share"

When you utilize the Facebook Like button on your Muse created web pages, it carries the title over (from the Page Properties) and works fine, except for the Index. This also applies to bookmarking pages. When the Facebook like is used (and the sub window for Facebook opens) it is titled “Home” that’s it. When the index page is bookmarked it also says “Home”. Why won’t the whole title be used? Is there any way to correct this?

Hi,
Could you please provide the url of the site and let me take a look to your current settings,

Device will not show when iTunes is loaded and iPhone is connected

When I connect the iPhone to iTunes the device does not show. So now I can't sync my phone to iTunes. Can anybody help with this please?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

PS CS6: Images sometimes not saved when using Close All and instructed to save

I thought I had made a crazy mistake when this happened earlier today, but it just did it again and I was paying close attention.
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes. This saves lots of time when adjusting several multi-hundred MB images. Imagine my surprise today when it closed an image without saving! I had to repeat about 30 minutes of work as a result.
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work. It worked fine until a moment ago when it did it again.
Has anyone seen something like this? I can't find anything in searching. In all my time using this feature in PS I never once had a problem before.

Thanks for the reply.
I just upgraded to CS6 from CS5 a few days ago, and this is my first week in heavy usage.
I do have Save in Background turned on. I am saving locally. I also have auto recovery saves turned on, at 5 minute intervals (CS6 has crashed a few times on me)
Yesterday I used Close All with Save maybe 10 times, and it exhibited this behavior 2 of those times.
In the two cases, I had 3 PSDs open, each a little over 400 mb in size. It seemed to save two of the images, but left one unsaved. I noticed that instead of spending several seconds saving, it would quickly just close that image - as though it believed no changes had been made. The changes that had been made to the image were routine - add some adjustment layers, some masks etc.
I have tried to reproduce it by opening the same images, making similar changes and then repeating Close All with Save, but so far no (bad) luck. Idle speculation - could it have something to do with the frequent interval of autorecovery saves that I do? Some kind of conflict? Or is it something to do with background saves? Definitely never saw this in previous versions of PS.
As a workaround, I have made a simple action that saves an image and apply it in batch. I just can't risk losing work.

Page break not applying when using sub report inside main report

I have a main report inside which there is subreport (using SQL Server 2012). I placed some page breaks inside subreport but they were not working. I read on technet forums that this is a a known issue with SSRS.
One solution I found is to put a table inside main report, then in first row add a rectangle and set its property "Add a page break after" and then add subreport after this rectangle in that table in main report. I did that and now in some cases
it does show sub report on a separate page but sometimes it shows subreport on same page.
Could it be because in some case sub report has no or less data (hence it cannot cover whole page) and in that case it will always show on one page? How can I show empty subreport on a separate page?

I fixed it by clicking both "Add a page break before" and "Add a page break after" in rectangle.

Users with a https home page are not redirected when using web-passthrough on WLC 5508

I have a Cisco 5508 running version 7.0.116.0. This controller hosts an open public wifi that requires users to accept a terms agreement via a Web-Passthrough setup that redirects them to the terms splash page. For most people this works without any issue. However, if a user has their homepage for their default browser set to a https site, such as https://www.google.com, then they are never redirected to the terms splash page. The page will just spin and spin until finally they get a timeout error.
Has anyone else had this experience? If so did you find a solution or is this some sort of short coming of the controller?
Any and all comments/information is appreciated!
Thanks,
Jim

This is a known issue (see bug ID CSCar04580).
CSCar04580 Bug Details
web auth (redirect) doesn't work when client users a https url
Symptom:A client whose home page is an HTTPS (HTTP over SSL, port 443) one will never
be redirected by Web Auth to the web authentication dialog. Therefore, such
a client will not know to authenticate, and will fail to connect to the
network.
Workaround:The client should attempt to open any HTTP (port 80) web page.

Showing description and not key when using check tables in Web UI

Hi,
I have added an field using EEWB to Opportunity Item, and connected it to check table CRMC_CUSTGRP1. It shows fine, and we can select from the check table using the web ui.
However it shows the key column and not description column from the table. Is there a way to make the web ui show description instead of the key?
Regards
Mattias

Hi,
I debugged GET_V_S_STRUCT, and it tries calling
ME->VIEW_DESCRIPTOR->GET_FIELD_GEN_VALUEHELP_DL
ME-VIEW_DESCRIPTOR is an instance of class CL_BSP_DLC_VIEW_DESCRIPTION, which does not contain the method GET_FIELD_GEN_VALUEHELP_DL, and obviously it throws an CX_SY_DYN_CALL_ILLEGAL_METHOD exception, which leaves the value table empty.
Do you have any idea why, or have I missed something fundamental?
Regards
Mattias
Edited by: Mattias Johansson on Nov 14, 2008 11:05 AM

Data in itab does not show when using FM REUSE_ALV_POPUP_TO_SELECT

Hello Experts,
I am using the said FM to display some data when the user clicks on a
custom button I made. But no data is displayed in the popup window. I
debugged it and the itab I am passing has a value in it. Below is my code:
WRITE icon_green_light AS ICON TO wa_legend-legend.
        wa_legend-column      = text-t05.
        wa_legend-description = text-d01.
        APPEND wa_legend TO lt_legend.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        DEFINE m_fill_fieldcat.
          wa_fieldcat-fieldname = &1.
          wa_fieldcat-tabname   = &2.
          wa_fieldcat-seltext_m = &3.
          wa_fieldcat-icon      = &4.
          wa_fieldcat-outputlen = &5.
          append wa_fieldcat to lt_fieldcat.
          clear wa_fieldcat.
        END-OF-DEFINITION.
        m_fill_fieldcat 'LEGEND'      'ITAB' text-t04 'X' '14'.
        m_fill_fieldcat 'COLUMN'      'ITAB' text-t11 '' '50'.
        m_fill_fieldcat 'DESCRIPTION' 'ITAB' text-t12 '' '50'.
        CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
*           I_TITLE                       =
*           I_SELECTION                   = 'X'
*           I_ALLOW_NO_SELECTION          =
            i_zebra                       = 'X'
*           I_SCREEN_START_COLUMN         =
*           I_SCREEN_START_LINE           =
*           I_SCREEN_END_COLUMN           =
*           I_SCREEN_END_LINE             =
*           I_CHECKBOX_FIELDNAME          =
*           I_LINEMARK_FIELDNAME          =
*           I_SCROLL_TO_SEL_LINE          = 'X'
            i_tabname                     = 'LT_LEGEND'
*           I_STRUCTURE_NAME              =
            it_fieldcat                   = lt_fieldcat[]
*           IT_EXCLUDING                  =
*           I_CALLBACK_PROGRAM            =
*           I_CALLBACK_USER_COMMAND       =
*           IS_PRIVATE                    =
*         IMPORTING
*           ES_SELFIELD                   =
*           E_EXIT                        =
          TABLES
            t_outtab                      = lt_legend[]
         EXCEPTIONS
           program_error                 = 1
           OTHERS                        = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
Hope you can help me guys. Thank you and take care!

Hi,
check this code and modify your FM accordingly then it'll work,
Q. i_checkbox_fieldname = 'CHECKBOX'
A. If the table output in the popup has checkboxes at the beginning of the rows (e.g. for multiple selection), the internal table must contain a field containing the value of the checkbox.
Assign the name of this field to the parameter I_CHECKBOX_FIELDNAME.
Q. i_tabname = 'TLINE'
A. This is the name of ur input help internal table
Q. it_fieldcat = fieldcat[]
A The table u gonna display has to have a fieldcat.
Q. it_excluding = extab[].
A. In case u wanna exclude some functions.
Below is a working example, paste it in se38 and activate.
!!! Warning SAVE IT AS A LOCAL OBJECT !!!
report ztests1.
type-pools: slis.
data: index type i.
data: l_kunnr like kna1-kunnr.
data: input(10) type c,
text(4) type c,
text1(5) type c.
data: begin of itab occurs 10,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data: e_exit.
data: fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
parameter: p_kunnr(10) type c.
at selection-screen on value-request for p_kunnr.
select kunnr name1 up to 10 rows
from kna1
into table itab.
fieldcat-tabname = 'ITAB'.
fieldcat-fieldname = 'KUNNR'.
fieldcat-seltext_m = 'Cust'.
fieldcat-ddictxt = 'M'.
fieldcat-outputlen = 10.
APPEND fieldcat.
CLEAR fieldcat.
fieldcat-tabname = 'ITAB'.
fieldcat-fieldname = 'NAME1'.
fieldcat-seltext_m = 'Cust Name'.
fieldcat-ddictxt = 'M'.
fieldcat-outputlen = 30.
APPEND fieldcat.
CLEAR fieldcat.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'Customer Selection'
I_SELECTION = 'X'
I_ALLOW_NO_SELECTION =
I_ZEBRA = ' '
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_CHECKBOX_FIELDNAME =
I_LINEMARK_FIELDNAME =
I_SCROLL_TO_SEL_LINE = 'X'
i_tabname = 'ITAB'
I_STRUCTURE_NAME =
IT_FIELDCAT = fieldcat[]
IT_EXCLUDING =
I_CALLBACK_PROGRAM =
I_CALLBACK_USER_COMMAND =
IS_PRIVATE =
IMPORTING
ES_SELFIELD =
E_EXIT = e_exit
tables
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
seshu.

Page tiles not showing when using Adobe Muse and Web marketing hosting

Similar Messages

Maybe you are looking for