Pages 5.2.2 won't "send to back"

Hi,
I have recently upgraded my Pages version to 5.2.2.  I am having an issue moving an image backward.  If I click "Send to Back" it won't go behind my text.  I have gone into Format-Arrange and used the 'Send to Back' icons, and have also used the Arrange drop down.  Both won't send my image all the way to the back.
Please help.

I thought it used to be easy too. And when I tried it with 5.2.2 this evening neither buttons on the Inspector's 'Arrange' menu nor the  'Arrange' drop down menu itself would allow selection. They were all greyed out.
I think they've now added a thing called 'Section Master' under the 'Arrange' menu. I highlighted  the image (handles now showing) and in the 'Arrange' menu I selected 'Section Masters' and then clicked 'Move Object to Section Master' which did the trick.
MVBW
Mervyn

Similar Messages

  • Won't send

    My outgoing mail won't send. It's a pdf with three small photos on the bottom of the one page document. What's the problem? The system check shows that my server is connecting - any suggestions?

    Mail (Mountain Lion): If you can’t send messages

  • Emails won't send from Hotmail account on iphone as message says password is incorrect

    I recently had a problem with my hotmail account which meant it was blocked and I had to go through a securitiy process to unblock my account and change my password. I can now use my hotmail account again and changed the password on my phone settings to be able to use this account on my phone again. However, when I try to send emails from my iphone from my hotmail account, it says my password is incorrect and the emails won't send. I am also not convinced that I am receiving all emails, although some came through when I initially re-added the account. I have tried to delete the account and add it again, as well as restart my iphone, but I am still having the same problem. The password I have for the account is correct! I would be so grateful if anyone could help.
    Thanks.

    For anyone else having this problem I have found a solution! You need to change the outgoing server settings as well as the incoming server password which appears on the main settings page. Go into the account in settings and select the box under outgoing mail server. Click on the box under primary server. This will take you to the settings, including the password which you can change.

  • Document library workflow won't send email

    Hi,
    when i set the settings for a workflow on a Document library, it won't send an email.
    I use a workflow on a document item.
    In the settings i use the Three statement, task list "tasks". History list is "Workflow History".
    Then i use "Start this workflow when a new item is created".
    On the next settings page I set the task details to sent an email to a costum AD account.
    Further i have set all the states in the library and settings.
    But even though the custom account(email) is filled in, it won't sent an email to that email adress.
    Can anyone help me to understand why it won't sent an email?
    Thanks.

    Hello,
    Many things can go wrong with the a workflow.  I am going to assume you are creating your own workflow via Visual Studio or SharePoint Designer. I always recommend you add a couple "Log to Workflow History" actions to see where the workflow
    is working and is not working.  For example, when the workflow starts, immediately log "Started WF".  Also add one to the end of the WF.  Some times a couple in between actions will help you track progress. 
    Run the workflow with the "Log to Workflow History" Actions ... if it runs but stops when trying to email ... the email is your issue.
    Now for a couple things to check:
    Are the Outgoing email settings in Central Administration configured?
    http://technet.microsoft.com/en-us/library/cc263462%28v=office.15%29.aspx
    If this is not configured, email cannot be sent.
    Does the user have a valid email account?
    If so, this is good (send a quick email to verify). Be sure you can validate incoming emails.
    Is the User Profile Synchronization Running?
    http://technet.microsoft.com/en-us/library/ee721049%28v=office.15%29.aspx
    http://www.harbar.net/archive/2012/07/23/sp13adi.aspx
    When the User Profile Sync is not running, funny things can happen with profiles ... such as no email for the user.  The User Profile Sync pulls the Active Directory attributes and set them in SharePoint. It also copies this information to all the site
    collections on the farm.  Without the user profile sync running, it is very likely that you may not have an email on the user.
    You can add the email to the user on the particular site manually via PowerShell: 
    Set-SPUser -Identity
    "DOMAINusername" -Email
    "[email protected]"-Web
    http://yourdomain.com
    More Info on Set-SPUser: http://technet.microsoft.com/en-us/library/ff607827%28v=office.15%29.aspx
    If you are having this issue and you have many users, consider using the User Profile Sync.
    Hope this helps .. .please pick answer if it does help you.
    Cheers,
    -Brian Culver

  • How do i reset my security questions if it won't send an email to alternate address

    how do i reset my security questions if it won't send to my alternate email address?

    If the email's not in the inbox or spam filter of your rescue email address, you need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (119008)

  • Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

    Hi. I d like to email a photo from iPhoto but I keep receiving the same error message saying that the combination username /password is incorrect so it won't send the email. How do I reset these parameters so I can email my pix? Thx

    You have a number of things that will make this not work.
    Your mailto link is not the way to go, take a look at this and it should get you on the right path.
    http://www.paulgdesigns.com/learncontactform.php
    On your action page, you can have it give the thank you message that you want.  Having a seperate page saying they forgot to do something complicates matters more than you might wish at this point, and usually irritates people. however if you decide you want to go that way, look up "sticky forms".  What this does is re-populate the fields when they have to go back to correct.
    A better way would be to validate the information, you can use Spry if you want which is built into dreamweaver.
    You also have in your html form this
    enctype="multipart/form-data"
    That is used for sending files, and since you are not, the form would not work, so you want to remove it.
    Hopefully that will give you a starting point.
    Gary

  • HT4993 I can't reset my security questions, they won't send to my email.

    I want to purchace an app but it makes me go to a security question page, I reset my email and push send but the thing to change my security questions won't send and now I can't purchase an app because I forgot my questions, please tell me why it isn't sending to my emails......

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • Mac mail won't send

    Imac mail won't send messages

    See if this helps. I recieved this from Comcast back in November 2012, but may have something to do with it.
    Dear Valued XFINITY Internet Customer, 
    Action Taken:
    On August 1, Comcast announced that we will no longer support the use of port 25 for sending email. Many older email clients (such as Outlook Express) default to using this port to send email. Please read this message to understand how this action may impact your ability to send email, and what you should do next. 
    Comcast Webmail Users:
    If you use a web browser to access Xfinity Connect or other webmail service, this action will not affect your ability to send or receive e-mail. 
    Email Program Users (Outlook Express, Outlook, MacMail, etc.):
    If you use an email program, this action will disable your program's ability to send email until you change your email program settings to send email on port 465. To protect your email security, click on the link for your current email software, then follow the step-by-step instructions to change your settings.
    Outlook Express
    Outlook 2003
    Outlook 2007
    Outlook 2010
    Windows Mail
    Mail (Apple OS X)
    Don't see your email software? Then locate the preferences for your mail account in the software you use and provide the settings listed on this page. Prefer professional tech support? A highly trained, Tech Expert can remotely change your settings to secure your email. To find out about one-time service and fixes, please call 1-877-550-0793 or visitxfinity.com/SignatureSupport. If you are not using Xfinity Connect and use another email provider, please contact your provider for its recommended port settings. Most email providers offer an alternative to port 25 for sending email. If you have additional questions please visit our Help and Support site or our Customer Forums where many questions are discussed and answered by the Comcast community. Thank you for choosing Comcast! Sincerely,
    Comcast Customer Security Assurance

  • IPhone won't send texts to non iPhones

    I can send texts to iPhones as either iMessages or SMS messages. However, I can't send texts to contacts who use other mobile devices (ie. Not an iPhone). However, I can receive SMS messages from non iPhones,
    I've reset network settings and nothing has changed.
    I only purchased my phone a week ago and have had this problem since new.
    Any ideas anyone? Your help is much appreciated
    Note: iPhone 6 16GB using iOS 8.1.2

    Hi Rhys1998,
    Happy New Year!  If you are not able to send SMS messages to a non-Apple phone, try these troubleshooting steps:
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT204065
    Check your device settings
    Make sure that you’re connected to a cellular data or Wi-Fi network.
    Go to Settings > Messages and make sure that iMessage, Send as SMS, or MMS Messaging is turned on (whichever method you're trying to use). Learn about the different types of messages you can send.
    Check the recipient's contact info
    Make sure that you're using the right phone number or email address. 
    Go to Settings > Messages > Blocked and make sure that they're not on your block list. 
    Restart your device and check for updates
    Restart your device.
    Check for a carrier settings update.
    Check for an iOS software update.
    Check the system status for iMessage
    Go to the Apple Services System Status page and check iMessage.Turn iMessage off and back on
    Go to Settings > Messages and turn iMessage off, then back on.Sign out and back in to iMessage and FaceTime
    Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
    Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
    On your iPhone first, sign back in to iMessage and Facetime.
    Sign back in to iMessage and Facetime on your other devices.
    Reset your network settings
    Tap Settings > General > Reset > Reset Network Settings.Back up and restore your device
    Use iTunes or iCloud to back up your content, then restore your device. 
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201287
    What's the difference between SMS/MMS and iMessage?
    SMS/MMS lets you send text messages and photos to other cellular phones or devices. iMessage lets you send text messages and photos to another iOS device over Wi-Fi, without worrying about text-messaging charges (cellular data charges may apply). 
    What do I need to use SMS/MMS and iMessage?
    Here's what you need to use SMS/MMS and iMessage:
    SMS/MMS: A text-messaging plan. Contact your carrier for more information.
    iMessage: An iPhone, iPad, or iPod touch with iOS 5 or later.
    Can’t get text messages from an iPhone - Apple Support
    http://support.apple.com/en-us/TS5185
    You can't send SMS or text messages to a non-Apple phone (such as an Android, Windows, or BlackBerry phone), because the messages are sent as iMessage
    This can happen if you used iMessage on your iPhone and then transferred your SIM card or phone number to a non-Apple phone. If you didn't turn off or deactivate iMessage before switching to a non-Apple phone, other iOS devices will still try to use iMessage to send text messages to your phone number. Follow the appropriate steps below to resolve the issue. Likewise, if you can't send someone a text who used to have an iPhone, having them follow these steps should resolve the issue.
    If you still have your iPhone
    Put the SIM card you transferred from your iPhone back into your iPhone.
    Make sure that you're connected to a cellular data network (such as 3G or LTE).
    Tap Settings > Messages and turn iMessage off.
    If you don't have your iPhone or if you can't turn off iMessage
    Use the deregister iMessage webpage. For more information, see Deregister iMessage: Frequently Asked Questions.These steps won't deregister your phone number with iMessage
    Logging in to My Support Profile and changing your password or removing your phone number
    Texting STOP to 48369
    Resetting your network settings
    Changing your Apple ID password
    Last Modified: Nov 10, 2014
     I hope this information helps ....
    - Judy

  • My imac's mail programme won't send my mail!

    The imac has my hotmail linked to it, and has never had any problems but suddenly it won't send mail.  It says it timed out when connecting to live.com.  I have tried reinstalling the hotmail account but it didn't fix it.  Does anyone have any ideas how to fix this?  My iphone is working fine with the account and it also works with hotmail over the internet.  I am stumped!

    I've had exactly the same issue over the past couple of days and this fix has just worked for me (thanks untzy) but I guess it hinges on you being with BT.
    1. Login to your BT home hub manager (this can be done using the router address located at: system preferences/network/advanced/TCP/IP)
    2. Input your router address into the web browser search bar
    3. Once on the access page you will need to input your wireless admin password (found on the back of your router)
    4. When you are on the home page, you will need to follow the following steps to change your device name:
    5. Select "A-Z" in the top right section of the page
    6. Click on "Home Network" from the available list of options
    7. Click on the Device in question (it should be showing as connected - I identified mine by the mac address, although it was named as 'unknown')
    8. Under Device Information, enter a new name (be sure this is memorable in case you need it again)
    9. Ensure Always use this address is set to Yes (it is by default)
    10. Click Apply.
    You will then need to restart your computer - after this, hopefully the problem will be resolved....

  • Have a MX470. Only faxed about 15 times 10 of those not successful. Now it won't send fax

    Bought a MX470 less than a year ago. Canon by phone helped me set it up. Worked a few times now it won't send out a fax. Printed out Activity Report.  Mixtures of Modes TRANSMIT, AUTO RX, MANUAL TX, MANUAL RX. Only about 5 went through in the result column and the mode was transmit. The remaining results indicate NG with the above Modes changing each time. What have I done?

    Hi grandma,
    Please ensure that the phone line attached to your printer has not become disconnected from the unit.  Once this has been verified, you can try disabling the dial tone detect function of the fax to see if this will allow you to fax successfully. To do this, please follow these steps from the operation panel of the unit:
    1.  Press the FAX button.
    2.  Press the SETUP button (looks like a pair of pliers and a screwdriver).
    3.  Use the left/right arrow buttons to select FAX SETTINGS, then press the OK button.
    4.  Use the left/right arrow buttons to select ADV. FAX SETTINGS, then press the OK button.
    5.  use the left/right arrow buttons to select DIAL TONE DETECT, then press the OK button.
    6.  use the lef/tright arrow to select OFF, then press the OK button.
    7.  Press the FAX button to return to the main fax screen, then attempt to fax again.
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My iPhone 5c won't send iMessages, snapchats, email from the Mail app, and it won't load YouTube. Other internet apps like Pandora and Instagram work fine though. Any suggestions on how I can fix this?

    A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?

    Try this procedure to be sure of a proper restart.
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
    I would also try: Settings > General > Reset > Reset Network Settings

  • I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my do

    I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    Do you have a cellular plan with data and SMS activated?

  • My Iphone 5 won't send pictures or accomplish group messaging. Please advise! If cannot be fixed soon I will switch to the Galaxy phone. Anyone else having this issue?

    My iphone 5 won't send pictures or accomplish group messaging. Anyone else having this problem? Will be switching to Galaxy if not fixed soon.

    Hi celtics3456,
    If you are having issues with intermittent message delivery in Messages, you may find the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

Maybe you are looking for