PAPI RMI Error

Hi all,
I use the PAPI in order to connect me to the process on ALBPM 5.7 and I receive the following error
java.lang.NullPointerException
     at fuego.rmi.RemoteProxy.processBatch(RemoteProxy.java:176)
     at fuego.component.ExecutorClient.sendRequest(ExecutorClient.java:249)
     at fuego.component.ExecutorClient.customInvoke(ExecutorClient.java:100)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:115)
     at fuego.papi.impl.rmi.SecureEngineProxy.disconnect(SecureEngineProxy.java:91)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.papi.impl.AbstractSecureEngineHandler.invokeInternal(AbstractSecureEngineHandler.java:46)
     at fuego.papi.impl.rmi.RMISecureEngineHandler.invoke(RMISecureEngineHandler.java:52)
     at $Proxy0.disconnect(Unknown Source)
     at fuego.papi.impl.ProcessServiceNESessionImpl.close(ProcessServiceNESessionImpl.java:1870)
     at fuego.papi.impl.ProcessServiceNESessionImpl.close(ProcessServiceNESessionImpl.java:1384)
     at fuego.papi.impl.ProcessServiceNESessionImpl.finalize(ProcessServiceNESessionImpl.java:1900)
     at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
     at java.lang.ref.Finalizer.runFinalizer(Finalizer.java:83)
     at java.lang.ref.Finalizer.access$100(Finalizer.java:14)
     at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:160)
     Do you have any idea?
     Thank you for your help

It looks like you created a session and it was garbage collected without
being closed.
Try closing the session once you don't need it anymore.
Regards,
Juan
On Fri, 30 Nov 2007 11:04:19 -0300, Sabrina Albanese wrote:
Hi all,
I use the PAPI in order to connect me to the process on ALBPM 5.7 and I
receive the following error
java.lang.NullPointerException
     at fuego.rmi.RemoteProxy.processBatch(RemoteProxy.java:176)
     at fuego.component.ExecutorClient.sendRequest(ExecutorClient.java:249)
     at fuego.component.ExecutorClient.customInvoke(ExecutorClient.java:100)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:115)
     at
fuego.papi.impl.rmi.SecureEngineProxy.disconnect(SecureEngineProxy.java:91)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at
fuego.papi.impl.AbstractSecureEngineHandler.invokeInternal(AbstractSecureEngineHandler.java:46)
     at
fuego.papi.impl.rmi.RMISecureEngineHandler.invoke(RMISecureEngineHandler.java:52)
     at $Proxy0.disconnect(Unknown Source)
     at
fuego.papi.impl.ProcessServiceNESessionImpl.close(ProcessServiceNESessionImpl.java:1870)
     at
fuego.papi.impl.ProcessServiceNESessionImpl.close(ProcessServiceNESessionImpl.java:1384)
     at
fuego.papi.impl.ProcessServiceNESessionImpl.finalize(ProcessServiceNESessionImpl.java:1900)
     at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
     at java.lang.ref.Finalizer.runFinalizer(Finalizer.java:83)
     at java.lang.ref.Finalizer.access$100(Finalizer.java:14)
     at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:160)
     Do you have any idea?
     Thank you for your help--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Similar Messages

Receiving a false paper jam error message for a 6310 all in one printer

I have an hp 6310 all in one printer. It is showing a false paper jam error message with no paper in the printer. I have tried all of the fixes that have been suggested on the website as well as on you tube to no avail. Nothing works, I have cleaned all of the parts that have been suggested to clean and reset the printer. I am still receiving the same paper jam message with no paper in the printer. Does anyone have any suggestions to try to fix this printer.

Do you here any clicks or other sounds when the 6310 first starts up?
I'm trying to fix false paper jam error on Sharp Fax/copier,F0-4450.
When researching the problem, found suggestion that a bad solenoid could cause that error.
After completely disassembling the copier found that wasn't the problem.
I here 2 clicks during start up that sounds like gear slipping a tooth, as if something is preventing a shaft from turning.
Back to the drawing board.
UPDATE!!! Took fuser out, turned gears with screwdriver til 81/2x11 paper went thru, lubricated ends of fuser roller with powdered graphite lube.
3 page fax came thru.

Encountering Java RMI error trying to install IDM 11.1.1.6

Hi all,
I'm completely stumped trying to install Oracle identity management 11.1.1.6 from the download here
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/index.html
I am on RHEL 5.5 x64, clean install into a Xen VM, all the latest updates applied.
What I have done so far is as follows.
Install GI and DB 11.2.0.3.0 for a single instance using ASM
Set up some ASM disk groups using iSCSI attached storage
Create a database using DBCA
Install RCU 11.1.1.6 and create the necessary repository schema for IDM
Install Sun JDK 1.6.0_38
Install Weblogic server 10.3.6 - downloaded from eDelivery
Carry out a software only installation of IDM
Use $MW_HOME/Oracle_IDM1/common/bin/config.sh to create a Weblogic domain which supports IDM
Run $MW_HOME/Oracle_IDM1/bin/config.sh to try and configure IDM
Sadly at this last step I am encountering an RMI error from the weblogic admin server whien specifying which components I want to configure - the installer is connecting to the running server but I get an RMI exception in the logs, the installer reports INST-5194: Unable to connect to the Oracle WebLogic Middleware Administration Server and it won't go any further. Full error stack follows. Anyone got any suggestions? I'm really scratching my head here.
####<Jan 8, 2013 9:44:12 AM GMT> <Warning> <RMI> <perses> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c973505a4484734b:-5669ab43:13c160fd34d:-8000-0000000000000019> <1357638252608> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
     at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getMBeanContextLoader(JMXContextInterceptor.java:475)
     at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:146)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
     at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1431)
     at javax.management.remote.rmi.RMIConnectionImpl.access$300(RMIConnectionImpl.java:74)
     at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1295)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1394)
     at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:630)
     at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>

Did you manage to solve this issue?
I'm running into the exact same error, but installing 11.1.1.7.0 on Windows 2003
Haven't found anything on MOS yet :(
Kind regards,
Rob
Edited by: rgouw on 10-apr-2013 1:10

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

HP Laserjet 2430dtn Paper Jam Error

I have got a HP Laserjet 2430dtn and the bit of plastic for the rear paper jam sensor has broken off the printer and as such I now get a permanent 'Rear Paper Jam' error.
Is it possible to disable the sensor so that I can still use the printer or is the printer dead?

Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error

How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.

Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

RMI Error when trying to connect to remote server

We are getting an RMI error (below) when trying to connect to a remote weblogic 9 server with mission control.
We are running a portal application on the app server. If we connect using mission control before the app starts then mission control connects successfully.
If we wait until the portal application is running then we get the following error when we try to connect:
Could not open Management Console for UAT Live (1).
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
     java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)
     at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
     at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo(Unknown Source)
     at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.getMBeanInfo(RMIConnector.java:1031)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:262)
     at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:297)
     at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:99)
     at com.jrockit.console.rjmx.RJMXConnectorModel.<init>(RJMXConnectorModel.java:113)
     at com.jrockit.mc.console.ui.actions.StartConsole$1.preConnect(StartConsole.java:36)
     at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:73)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:371)
     at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
     at java.rmi.server.RMIClassLoader$2.loadClass(RMIClassLoader.java:620)
     at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
     at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
     at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:290)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:139)
     ... 11 more
thanks

As poorem suggested, I would check that the time is the same on both the identity and vcac appliances. It has been a while since I posted this question but I believe that did get me past that specfic error. I changed the timezone on each and made sure the times were correct and the same.

Photosmart c7180 paper jams & wrong paper size errors

About 5 weeks ago I bought an ASUS computer with Windows 7, 64 bit and installed the drivers for my printer from the hp website. The printer is hooked up to my wireless network. No problem. 3 weeks later I have constant paper jams, I did the standard clean out paper, clean dust off of rollers and while on, unplug plug from back of printer then from outlet and wait a bit then plug back in. I was able to print a test page then it started happening again, sometimes reporting a paper jam error, sometimes a wrong size paper error, and sometimes an out of paper error. I also noticed that the rollers seem to be trying to grab the paper really fast (faster than they normally did). I have had this printer for many years-not even sure how many-and have hardly had an issue with it ever. I love it.

HI CFox,
Here is the link to the support document for paper jams for your printer. This is the most comprehensive document for paper jams on your printer. Let us know if this works for you or not.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

I cannot clear my paper jam error?

I clean out the back of the printer to get rid of the paper jam error, only to get the paper jam error again when on half of the sheet goes through the printer.

Is your printer the Photosmart 8050? If so see the troubleshooting page here. If not please read this post then provide some details. What printer model?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Epson XP 600 paper size error with IPAD?

Solutions for Epson XP 600 paper size error with IPAD?

You may have to switch between A4 and Letter size.

False paper jam error message on Officejet All-in-Ones

I've been helping a not-so-techie friend with his J6450 false paper jam errors. He's now on his second one (got replacement from HP) and has same exact problem. (We think the paper sensor is getting stuck and causing error message.)
His problem is by no means unique. I have looked at customer reviews for this printer on many vendors' websites, and have seen horrible reviews of HP's all-in-ones because of the false paper jam error message. By the way, none of the suggestions here seem to fix the problem, so don't waste your time uninstalling and re-installing the software. The problem is mechanical.
With so many posts regarding false paper jam errors on these HP All-in-Ones, HP should replace these printers with a different model that does NOT have this problem, if such a model exists, at no charge, of course.

I have just spent the last 3 hours thinking I have been overlooking paper somewhere in my J6450 after consistently getting a paper jam error. Of course my warranty has expired! Just wondering if it would be worth fixing OR NOT?

Photosmart 375 paper size error msg

My Mac has OS X 10.10.1. When I attenpt to print on my portable photosmart 375, I receive the error message "Paper is too small. Choose a larger paper size." I believe I should be choosing 4x6 size in the print dialog box on my computer, and the same in the printer's menu, since that is the size of the photo paper for this small printer. However, in the print dialog box on my computer, no photo size options (4x6, 5x7) come up, only Letter, A4, etc. As for the printer's menu, the HP manual states that I can select "paper size" choosing Menu -> Help -> Paper Size, but the list of options under Help on the printer's menu gives all that the manual states should be there EXCEPT "paper size". I have manually downloaded the latest Mac updates for hp printers. I have reset the printer to default settings. I appreciate any help you can give.

Hi @penelopem,
Welcome to the HP Forums!
I noticed that your HP Photosmart 375 is giving you a paper size error message. I am happy to help you with this issue!
Please take a look through this guide, Changing Print Settings in Mac OS X, and follow the 10.8 steps.
Otherwise, if that does not work you can probably use the printer as a standalone using the memory card slots. Troubleshooting Memory Cards.
For future reference, your printer's user guide can be found at this website, HP Photosmart 375 Compact Photo Printer User guides.
The last suggestion is to consider upgrading your printer to one that has full feature software and drivers available for Mac OS X 10.10. If you wish to do so, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HPePrint gives paper mismatch error when I try to print from my android phone

I have 5x7 paper in the Photosmart 7520 printer and when I try to send a photo from my android phone to the printer, I get a paper mismatch error. Will it only print 4x6? Can I not change a setting somewhere?
This question was solved.
View Solution.

When I print from my Mac, I don't get the error as I'm printing from an application like Lightroom and I can tell it the paper size. Don't get that opputunity when I print from my phone. By default, I think the printer assumes 4X6. Wish that there was some way to tell it otherwise as I'd rather use 5x7

I have an HP Officejet Pro 8500 with a FALSE paper jam error that won't clear.

My subjectline says it all. I have a false paper jam error that will not clear and keeps me from printing. Can you help?

I have a C3180 with exactly the same issue.... I've tried trouble-shooting, restarting, cancelling and re-sending, disconnecting and reconnecting.... but nothing has helped yet and it's SO frustrating because I have to submit this wretched application like already Good Luck with yours, and if you figure out anything that works please let me know!

PAPI RMI Error

Similar Messages

Maybe you are looking for