Paradigm Millenia CT Speaker System or Bose Cinemate GS 2

Torn between the two. I want Bass that I can feelin my chest with no distortion at high levels. Guy at Apple said either of these two will do it. What do you guys think? Will hook up to Apple tv

The problem is with the Bose bar and not the Apple TV . I have confirmed that sound is Transmitted from both the HDMI output and the Optical (Toslink) output simultaneously from the Apple TV
The BOSE bar AUTOMATICALLY selects the best quality signal . You can't select it. So HDMI will win and once the TV is off, audio will not work.
The AUX port is essential useless as Bose told me its for "Redundancy" and you can't "select" to use it.
What you need is an optical selector . I bought this one for around $20 from amazon . I like it because its black and you can connect up to 4 devices.
http://www.amazon.com/gp/aw/d/B005BXVB3G
Because the Bose bar inputs from the Optical out on the back of the TV, have it now go through the selector. Your Apple TV can be input 2 .
You can now watch TV or Apple TV normally but if you want to still hear the music from Apple TV , manually change the selector to input 2 on the optical selector device . When you turn off TV it will still play sound coming from apple tv's optical output .
Works perfectly ! Cheap work around . Unfortunately for such an expensive Bose device you shouldn't need to buy "work arounds" but I'm very happy with the sound quality and I'm a Bose believer . So it was worth doing .

Similar Messages

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

Connecting Bose Cinemate System to Panasonic TC-P50G20

I just purchased a Panasonic TC-P50G20 Plasma 50 inch TV last week at Best Buy. I had my Bose Cinemate hooked to my old Vizio. Does anyone out there know how this is done? Let me know. Thanks.

what is the model number of your receiver?
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

Apple tv , Bose cinemate series 2, no sound

I just bought a Bose Cinemate series 2 system , bought used from 2009. When I plug the Bose system through the tv box it runs / sounds perfect.
But when I use the apple tv I get no sound. Im using audio cables from the bose reciever , plugging them in audio on my tv ( Lg HD ) it doesnt work.
Does apple tv not support this system?

I have the same problem. Here is my solution to passing Dolby Digital sound through your system (this is, at least, how I chose to solve this problem). You will need 1 HDMI cable and 2 fiber optic cables*
HDMI from Apple TV 2 to your TV monitor
Fiber optic 1 from TV monitor to receiver/preamplifier input (e.g., Video 1, TOS link 1, etc.)
Fiber optic 2 from Apple TV 2 to receiver/preamplifier input (e.g., Video 2, TOS link 2, etc.)
For all connections other than movies that you want to watch in DD 5.1, you can use Fiber Optic 1 as the source selection; the HDMI will pass audio from the Apple TV 2 to your TV monitor, which will pass the audio to your receiver/preamp. For movies that you'd like to hear in DD, use Fiber Optic 2, which is running straight into the receiver/preamp. You will get DD surround (or whatever other format you'd like). Whatever the problem is, this solution works. Set up can vary depending on your system, but make sure you're running a Fiber Optic directly to your amp to circumvent this problem!
*you can use 1 fiber optic if you want, just make sure it's running to your amp and not the TV

How can I get permission to use Apple's Airplay Technology for new and innovative Speaker System?

Hi there!
I want to integrate Airplay technology in a new and innovative Speaker System.
I've searched the internet, but couldn't find anything.
Does anybody know how to get the permission to use it?

Apple
1 Infinite Loop
Cupertino, CA 95014
408.996.1010
...ask to speak to someone about licen$ing.

Can I use a new ipod touch in an old dock/speaker system

I will be in the states soon and thinking of getting and I pod touch the 5th edition. However I have an older dock/speaker system and wonder will it work in it. I have heard that you have to buy an adaptor. Is this true and are they easy to get and how expensive are they. Also is there any issue with buying one in the states and using it in Europe

http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72
is the lightning to 30 pin adapter. There are some third party ones out there, but not a ton. If you go for a third party one go for a name brand not a no name generic.
If you want to buy one, look for a retailer with a good return policy so if it doesn't work you can take it back.
As to world wide use, shouldn't be a problem. The only thing you need to worry about is making sure you have a plug adapter if your charger is rated for world wide voltage, or making sure you have a charger that can handle the world wide variances in power. (Usually rated 100-240V in the specs)

How to play songs from an iphone on a speaker system without a computer

Hi,
i am new to this.
i wanted to know, how can i play the songs from my Iphone on a amplified speaker system without any Computer. I can use a airport express.
Is it possible.
Thanks
PJ

i wanted to know, how can i play the songs from my Iphone on a amplified speaker system without any Computer. I can use a airport express.
Sorry, but at present, there is nothing available for the iPhone or iPod Touch to stream audio (via AirTunes) to an AirPort Express Base Station (AX).

Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

A solution to the S750 speaker system problem

Well my s750 died just like everybody elses. But after creative wanted me to pay 75% of my purchase price, I found a better solution. Nope, I am not fixing the unit like you guy's. I do not see the need to fix a poorly design system! I am not sure if creative or indigo/bash/blade audio is to be blamed. But if I had to pick, I would say "indigo/bash/blade audio". Years ago before blade audio became indigo, I had a chance to visit their location in ontario Canada. This was just when they stop making the blade audio car amps.
While I was there, I happened to see this long list of brand names they had started to make amp modules for. Names like Harman International, Klipsch and so on. Anyway I cast the blame on indigo for this reason: Some years ago I had purchased a set of "harman international" infinity IL series speakers. Like our creative s750, the infinity shares a bash powered subwoofer system. And just like the s750 the infinity subwoofer like to blow up too! In the case of the infinity, the power supply was the weak link. The amp module in the infinity at that time, was built just like the blade audio car amps before. Which in my opinion is a much better design than what is being used in the s750. I remember one of the sale guy at circuit city at the time saying, "I wish we would drop this model". He went on to tell me the failure on the powered units were very high. You know there is a problem when the mid level Creative Inspire T7700 7.1, out last the flagship s750. Now, whats my better solution you guy's want to know? Two words , Simplifi Digital! The 7075a 7.1 amplifier along with Definitive Technology Pro Sub1000 and the remaing surround speakers from my s750 system. Yes, it did cost me more to go this route. But what I now have is a much more reliable system. And a sound that the s750 can only dream about. My s750 died while I was listening to Dave Bruebeck quartet "take five" at mid volume. With my current setup, I can listen mid volume all day long with no hiccups.
For those who my have the cash to spend. I recommend looking at my direction!? Keep this in mind, make sure whatever powered subwoofer you choose, is adjustable up to 50hz. The creative surround speakers dont play very well below 20hz. Also make sure whatever powered sub you choose don't use a BASH amplifier. For those looking at the s750 as a purchase, good luck. Or go over to partsexpress.com and get the Dayton Part Number 300-670, surround speakers. Then get the simplifi digital 7075 7.1 amplifier and power subwoofer of your choice and make a better/best system. Sorry Creative Labs! This post is NOT intended to cast negativity. I use and like the products you offer. I just do not like the s750, and the reasons are all over this forum and elsewhere on the net. I currently own 3 audigy 2zs sound cards, three Inspire t7700 speaker system, three sound blasters modems and yes, one defective/dead s750 speaker system. If anything use this post as a positive to what Creative Labs could offer in the future. A system like I now have, sure would be nice with the Creative name all over it.
Victor
Creative Labs end user

My system specs below. What I have now simply blows the S750 away. And this is mated to my Audigy 2zs card. I am tempted to try my Terratec Aueron 7.1 universe which does sound better than my 2zs. The Simlifi Digital amplifier is one serious unit. This amp has one HUGE toroidal transformer inside of it! I was able to see it thru the vents on top of the cover. Definitive Technology ProSub 1000 Subwoofer Specifications:Complement: One 10" woofer with polymer cone coupled to one 10" infrasonic radiator
Amplifier: 300 Watts RMS
Speaker Level High-Pass
Filter: 6 db/octave (80 Hz)
High-Level Low-Pass Filter: 24 db/octave continuously variable (40 Hz ~ 50 Hz) plus unfiltered LFE direct coupled input
Frequency Response: 8 Hz ~ 50 Hz
Simplifi Digital 7075, 7.1 Channel Surround Amplifier
Detailed Specfications
Power Output: 50 W/ch RMS, 8 ohm ( kHz sine wave, all channels). 70 W/ch RMS, 6 ohms ( kHz sine wave, all channels) 75 W/ch RMS, 4 ohm ( kHz sine wave, all channels) 75 W/ch Peak, 8 ohm (music) 100 W/ch Peak, 4 ohm (music)
Frequency Response: 20Hz-20kHz (+/-0.2db over the entire frequency range)
Total Harmonic Distortion: <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
Line-level Audio Inputs: V RMS (2.83V P-p) yields full power out into 8 ohms
50k Impedance
8 RCA inputs
Subwoofer output: Pass through (non-buffered)
AC Power: 0-25 VAC at 5A
Dimensions: 7.2"(width) x 3.9"(height) x 7.7"(depth)
Weight: 33 lbs
PRODUCT DESCRIPTION
The perfect audio solution for your Media Center or traditional PC. Use the Simplifi Amplifier with a Media Center PC, and get clear, powerful audio in your living room without needing yet another remote. Connect the Simplifi Amplifier to a traditional PC and hear how good your computer's audio can be.
Features
Class A/B Hybrid Design provides power and audio fidelity
Simple Rear Panel Connections make setup easy
Power Sensing Technology turns amplifier on/off with PC
Volume controlled through PC
Media Center Power Plug
Advanced Spike Protection
Fan cooled

IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

To Whom It May Concern,
I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

Speaker system no longer recognizes my ipod

Wondering if others have run into a similar situation and if there's an easy fix -- I have previously used an Altech-Lansing speaker system with my iPod classic very successfully. Now all of a sudden when I connect my iPod it tells me the accessory is unsupported. I can't seem to get it to work at all. Only change is that I recently added some songs/updated my library, but wouldn't think this should affect anything.
Would be very happy to get feedback from anyone out there who has encountered something like this recently...

Perhaps something in this article can help: iPod does not appear in iTunes or iPod updater in Mac OS X Products Affected
Have you tried a simple hard reset of the device with it still connected to your Mac? To do this, first make sure the hold switch is in the off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Need help connecting new HDTV to an old 5.1 speaker system

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

My iPod Nano 6th generation iLive speaker system quit on me and now I cannot find a compatible speaker system. I don't want tiny personal speakers, I use this for music in the family room.

I have 2 iPod Nano 6th generation. I had them setup with different music from iTunes and I had an iLive Bluetooth docking and speaker system that charged and played them with speakers spaced in the family room. Not a little personal setup but for reasonably loud music for the whole room. My iLive system died on me. It had the 20 pin place to plug in the iPod nano and a clock and the two speakers that were bluetooth. It was the perfect setup for me. Now that model has been discontinued and I cannot find anything like it. Does anyone know what a good option is? These iPods are only a couple of years old and now obsolete because they don't make anything to play them on. I don't use earbuds, it's not what I bought them for. One has our jazz music collection, the other has Christmas music. I want to hear it throughout the house.

Sorry typo it had a 30 pin place to plug in the iPod Nano

FireWire problem with speaker system

I have a gen4 Nano that will not charge on my speaker system. I used the white docking adapter, but still nothing. It will play the music, but won't charge. We have three gen3 Nanos that are recognized, but not the gen4. Please help.

Hi,
Welcome to the Apple Discussions.
Unfortunately, your 4th generation nano won't charge when it's connected to some components. Those components use the FireWire pins to charge, where newer components use the USB pins. And the newer iPods have stopped using the FireWire pins and only use the USB pins.
Like yours, my speaker system uses the FireWire pins, but I have a 4G iPod, so I had to use a universal dock to charge my iPod, and then connect it to my speakers via a cable. On the one hand, it's not the best solution, but it also allows me to use a remote to control the iPod, which is a nice bonus I actually use more than I thought.
charlie

I own a Zen Vison: M and am wanting a speaker system for my player

I know there aren't any docking speaker systems for them yet, and I honestly doubt there will be any real soon.
So what would be the best way to go?
My X girlfriend had an I-Pod (poooo) and she had this speaker system.
http://www.alteclansing.com/product_details.asp?pID=IM7
Honestly that thing would be the only reason I would go gay for I-Pod.
What would I have to do to get something close to that?
A dock: http://us.creative.com/products/prod...7&product=4485
Speaker System: http://us.creative.com/products/prod...7&product=4097
Wireless remote?:http://us.creative.com/products/prod...Specifications
The wireless remote confuses me becuase I swear the other night it said it suppotered the Vision: M and now it just says the Vision.
I've also found this, The Player Dock http://us.creative.com/products/prod...5&nav=features
But would it be compatible with the wireless remote?
It's so hard being a creative customer, There aren't any worth while accessories yet.
Anyway, if anyone could help me that would be great.

Hi There,?I just bought my Zen Vision M yesterday and so far I'm very happy with it. I had a Toshiba Gigabeat S30 first but the battery was horrid (seems to be very close to the Zune in design and features etc)?then I swapped for an 80GB Ipod video but there is a massi've problem with the EQ settings wanting to clip passed the digital headroom (google "ipod distortion")?Got The Creative Zen Vision M and I can say the following so far:?The sound output is strong and powers my $200 Sony in ear headphones with clean power even with bass all the way up. It's got a custom 5 band graphic EQ which works well to customise the sound to how you want it (I hate the standard MP3 EQ options of most players)?The sound quality is Very Very Good. (I'm a Hi-Fi freak and a competent home recording engineer)?I can see the screen easily even on a hot bright sunny day outdoors on 50% brightness (Very useful)?I have a couple of MP3's that were converted from WMA's and on some players they dont play but the Creative plays them fine. The use interface is easy to navigate but not quite as good as the Toshiba Gigabeat but looks nicer. The FM radio is great sounding aswell which is a bonus and you can custom name the stations. You can set photos as wallpaper and it comes with 6 player skins to customise the look. Battery seems pretty good. when its not locked the screen goes dimmer instead of turning off completely but the battery still seems to last ok. (if you lock it though it will last even longer.)?I haven't found anything bad about it yet. Toshiba Gigabeat S30? 5/0Apple Ipod Video 80GB? 2/0Creative Zen Vision M?? 0/0 so far?hope this helped.

Paradigm Millenia CT Speaker System or Bose Cinemate GS 2

Similar Messages

Maybe you are looking for