Parameter on the selection screen

Hi All,
I have a check box and a parameter on the selection screen. If the checkbox is initial, the paramter shouldn't be editable but if the checkbox is ticked, the parameter should be made mandatory to be enetered with value. How can this be done ?
Thanks in advance.

Hi,
Refer to the following code.In this change radiobuttons with the checkbox.
SELECTION-SCREEN BEGIN OF BLOCK B1.
parameters: p_erdat like zirpactivity-erdat modif id SC1 ,
            r1 radiobutton group RAD1 user-command ABC default 'X',
            r2 radiobutton group RAD1.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN.
check sy-ucomm = 'ABC'.
check sy-ucomm = 'F8'.
AT SELECTION-SCREEN OUTPUT.
loop at screen.
    if r1 = 'X' and screen-group1 = 'SC1' .
      screen-input = 0.
    ENDIF.
    IF r2 = 'X'.
           screen-group1 = 'SC1' .
      screen-input = 1.
    endif.
    modify screen.
endloop.
Hope this helps.
Reward if helpful.'
Regards,
Sipra

Similar Messages

Input help required for parameter on the selection screen

hi all,
i have created two parameters on the selection screen.
1. deptno
2.empname
so my requirement is if i input any deptno then i should get all
the empname corresponding to that deptno in the parameter empname
ie for deptno 10 there should be f4 help for empname.
here i am pasting my code plz check where i am doing wrong--
*& Report ZTEST10
*& Developer
*& Date: &DATE
REPORT ZTEST10.
tables: zemployee1.
parameters: p_deptno like zemployee1-deptno,
 p_empnam like zemployee1-empname.
Data: begin of itab occurs 0,
 deptno like zemployee1-deptno,
 empname like zemployee1-empname,
 empno like zemployee1-empno,
 end of itab.
At selection-screen on value-request for p_empnam.
select empname
 from zemployee1
 into corresponding fields of table itab
 where deptno = p_deptno.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 retfield = 'empname'
 PVALKEY = ' '
 DYNPPROG = sy-repid
 DYNPNR = sy-dynnr
 DYNPROFIELD = 'p_empnam'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'C'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
 IMPORTING
 USER_RESET =
 tables
 value_tab = itab
 FIELD_TAB =
 RETURN_TAB =
 DYNPFLD_MAPPING =
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
I will award ur efforts.
Thanks
sanjeev

Hi Sanjeev,
If you input any deptno and you should get all the empname corresponding then first you need to use CALL FUNCTION 'DYNP_VALUES_READ'.
EXPORTING
 DYNAME = sy-repid
 DYNUMB = sy-dynnr
TRANSLATE_TO_UPPER = ' '
 REQUEST = 'A'
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
TABLES
 DYNPFIELDS = gt_dynp
declare: DATA : gt_dynp LIKE dynpread OCCURS 0.
loop at gt_dynp into wt_dynp where fieldname = 'P_SUPRID-LOW'.
lv_low = wt_dynp-fieldvalue.
endloop.
Then while selecting use this p_superid-low instead of p_deptno.
Then :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
After this funtion module:
write:
IF sy-subrc = 0.
 READ TABLE itab
INDEX 1.
 'p_empnam' = return_tab-fieldval.
Declare return_tab as:
 DATA: return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
Thanks,
Shweta
ENDIF.

Ho to disabled the parameter on the selection screen

Hi all,
I have a parameter (p_matnr) and two radiobutton b1 and b2 on the selection screen. Now what the requirement is if user selects radio button b2, the parameter should get disabled. I know it can be done by loop at screen and then modifying the screen but in this case start-of-seection is to be called. In my case as the user selects the radio button b2 the parameter should be appear disabled. the code which is given below will work in that case where user selects the b2 and then press F8. Bu i don't want the user to pres F8. He will only select the b2 and will find the parameter (p_matnr) disabled.
Please suggest something.
AT SELECTION-SCREEN outpu.
IF b2 = 'X'.
LOOP AT SCREEN.
IF screen-name cs 'p1' .
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Thanks,
Annup.

Hi,
Try this i have used this in my code
SELECTION-SCREEN BEGIN OF BLOCK b_0 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-000.
PARAMETERS: rb_img RADIOBUTTON GROUP rad1 user-command rad.
PARAMETERS: rb_invo RADIOBUTTON GROUP rad1.
SELECTION-SCREEN BEGIN OF BLOCK b_2 WITH FRAME TITLE text-001.
*PARAMETERS: rb_img RADIOBUTTON GROUP rad1.
PARAMETERS: p_from like bkpf-bldat modif id gr2,
 p_to like bkpf-bldat modif id gr2.
SELECT-OPTIONS: s_arobj FOR toa01-ar_object modif id gr2.
SELECTION-SCREEN END OF BLOCK b_2.
SELECTION-SCREEN BEGIN OF BLOCK b_3 WITH FRAME TITLE text-001.
*PARAMETERS: rb_invo RADIOBUTTON GROUP rad1.
SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs modif id gr1,
 s_belnr FOR bkpf-belnr modif id gr1,
 s_gjahr FOR bkpf-gjahr modif id gr1,
SELECTION-SCREEN END OF BLOCK b_3.
SELECTION-SCREEN END OF BLOCK b_0.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF screen-group1 = 'GR1'. "Name field
 IF rb_invo = space.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ELSEIF screen-group1 = 'GR2'.
 IF rb_invo = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
START-OF-SELECTION.
Thanks & Regards,
Judith.

Set the parameter in the selection screen of a program from another program

Hi ALL,
I need to call the program RHALESMD from another program and the program RHALESMD takes from date as one of the input parameter.how do i set the from date from the calling program and call RHALESMD
Thanks
Bala Duvvuri

i got the answer
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Thanks
Bala Duvvuri

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

How to get the file name dialog on the selection screen

Hi All
I have a selection screen in which there is a parameter where I need to enter file name. Instead of typing filename in the parameter I would like to give a path from presentation server ( I am downloading Data to presentation server ).
How to achive this functionality in case of a parameter on the selection screen. I need to have File open Dialog box like Windows here and then it should show the filename and it's path in this parameter after selectiong from the dialog box.
Amol

Hi..,
Use the function module F4_FILENAME or WS_FILENAME_GET in the event
AT SELECTION-SCREEN ON VALUE REQUEST FOR P_FILE.
Parameters p_file type rlgrap-filename.
 AT SELECTION-SCREEN ON VALUE REQUEST EVENT
at selection-screen on value-request for p_file.
perform value_request.
*& Form value_request
 This subroutine proposes the possible input values *
There are no interface parameters to be passed to this subroutine. *
form value_request.
call function 'WS_FILENAME_GET'
 importing
 filename = p_file
 exceptions
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 others = 5.
check sy-subrc eq 0.
endform.
Reward all helpful answers !!
sai ramesh

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

How to maximise the length of the Parameter text on Selection screen

Hello,
I am putting the text in the selection screen for a Parameter.
Its text is long and it is not letting me to put the whole text in Text Symbol.
In the report
When I click on GOto--> Text Elements --> Selection Texts
I am sure there is a way we can maximise this...
ANy suggestions will be apprecaiated.
Regards,
Kittu

Hello,
Thank you for all your response!
Here is my code :
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS : BOTH RADIOBUTTON GROUP RG1,
EXICLASS RADIOBUTTON GROUP RG1.
SELECTION-SCREEN END OF BLOCK B2.
Here for Both, I need to add the selction text as 'BOTH Existing and Non-existing Classifications'
This is a parameter, can any body explain me how to do it with the Parameters.
Any suggestions will be appreciated.......
Regards,
Kittu

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

Parameter inactive in the selection screen of a report with logical datab.

I`m using a logical database in a report (PNP).
I need put as inactive some parameters of the selection screen. How can i do it ??? From customizing ???
Thanks

Hi,
Check this code..
" In screen loop You need to inactive the field.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Problem in getting parameter value from selection screen in web dynpro abap

Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
 <FS_OBJ_USAGE> TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
 CASE <FS_PAR_ITEM>-M_ID.
 WHEN `OBJ_USAGE`.
 ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
 ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
Radhika

Hi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
 DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
 WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to suppress the Selection Screen of Logical Database

Hi,
I am using one Logical Database for my report.
I want to show my customized selection Screen.
How can I hide the Selection Screen of Logical Database?

Hi,
Check the attributes of the report program where you assign the LDB. You can see the parameter Selection Screen press the F4 and check the LBD is provided any Blank screen or not.
For some LDB's you can find the Report Category in the attribute section of the report. either you can create the new screen or standard screen might be provided with Blank.
Check there ..
If you don't find you can use LOOP AT SCREEN..ENDLOOP to hide the fields of LDB.
Which LDB you are using.

Parameter on the selection screen

Similar Messages

Maybe you are looking for