Parameters need to configure Data Guard with Data Guard Broker

Hi gurus,
I'm following this guide http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf, but it isn't clarify what parameters we need to set to get the service up.
I noticed that we can setting up for two ways, either Oracle Enterprise Manager or Data Guard Broker. Do we need to configure the same parameters to OEM and after to activate the DGMGRL?
Can you help me?
Thanks,
Denis
Brazil

Hi mseberg,
Thanks for your help.
I want to adjust my listener.ora and tnsnames.ora files to access the rman like this guide https://sites.google.com/site/universodobraga/oracle/standby-11g.
Follow its:
* Primary*
listener.ora
LISTENER =
(ADDRESS_LIST =
(ADDRESS=
(PROTOCOL=IPC)
(KEY= TSA.WORLD)
(ADDRESS=
(PROTOCOL=IPC)
(KEY= TSA)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru11)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SDU = 32768)
(GLOBAL_DBNAME = primarydb_DGMGRL)
(SERVICE_NAME = tsa)
(SID_NAME = tsa)
(ORACLE_HOME = /oracle/TSA/112_64)
tnsnames.ora
TSA_PRIMARY.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru11)
(PORT = 1527)
(CONNECT_DATA =
(SID = tsa)
(GLOBAL_NAME = tsa.WORLD)
(SERVICE_NAME = primarydb_DGMGRL)
TSA_STANDBY.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru10)
(PORT = 1527)
(CONNECT_DATA =
(SID = tsa)
(GLOBAL_NAME = tsa.WORLD)
(SERVICE_NAME = standbydb_DGMGRL)
- Standby
listener.ora
LISTENER =
(ADDRESS_LIST =
(ADDRESS=
(PROTOCOL=IPC)
(KEY= TSA.WORLD)
(ADDRESS=
(PROTOCOL=IPC)
(KEY= TSA)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru10)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SDU = 32768)
(GLOBAL_DBNAME = standbydb_DGMGRL)
(SERVICE_NAME = tsa)
(SID_NAME = tsa)
(ORACLE_HOME = /oracle/TSA/112_64)
tnsnames.ora
TSA_PRIMARY.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru11)
(PORT = 1527)
(CONNECT_DATA =
(SID = tsa)
(GLOBAL_NAME = tsa.WORLD)
(SERVICE_NAME = primarydb_DGMGRL)
TSA_STANDBY.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = unbru10)
(PORT = 1527)
(CONNECT_DATA =
(SID = tsa)
(GLOBAL_NAME = tsa.WORLD)
(SERVICE_NAME = standbydb_DGMGRL)
When i tried to connect by RMAN:
RMAN> connect target sys/manager@tns_primary.world
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-01031: insufficient privileges
Environment
Oracle 11.2.0.3
Aix 6.1
SAP Ecc
Thanks very much,
Denis
Brazil

Similar Messages

Data Associtions not enabling while i am trying to do data mapping with data Associtions in BPM studio what is the reson?

Data Associtions not enabling while i am trying to do data mapping with data Associtions in BPM studio what is the reson?

Shouldn't @StartDate be an input parameter to the stored procedure? @RunDate also?
Example for sp with parameters:
http://www.sqlusa.com/bestpractices2008/stored-procedure-parameters/
The last error will go away upon a successful sp compile.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

I need help configuring a connection with asdm 5.2 for asa

Hi All
I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
When he tries to connect he gets the error
Cant connect to MySql Server at "IP Address" (10060)
He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
Any help would be greatly appreciated

Hi,
I'm not a security specialist but here is how I had it set up at home:
Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
Hope this points you in the right direction.

Formula variable for date calculations with date-characteristics (2004s)

Hi SDN,
I'd like to calculate the number of days between to date-characteristics. In 3.5, I was used to create 2 formula variables of the type 'replacement path', with 'date' as the dimension indicator. In my formula, I used the 'proces value as date' function for each variable, and I could perform calculations with them.
I'm trying to do the same in 2004s. However, I can't create replacement path's with 'date' as a dimension indicator. So I use 'number' instead, but it doesn't work: my query shows 'x'.
I can use the variables that I created using the 3.5 query designer as a workaround. But I hope there is a better solution.
If other people experience the same problem, please respond. Then I know it's probably a bug.
Kind regards,
Daniel

Daniel,
Try to look at the formula variables defined before the upgrade and see what is different to the newly defined. I am guessing just the terminology used is different.
If not the date value might be blank or something for one of the f-variables used. Try to display the formula variable values as KF in the query results and check what it is showing.
I hope this helps.
-Bala

Need to configure ADSI adapter with siebel 8.0

Hi,
i need to configure ADSI adapter in siebel 8.0, i tried to do it , but after completing the configuration for ADSI adapter ,I am unable to see the login page of Callcenter application.
Any help on how to restore the setup and how to configure the ADSI adapter in Siebel8.0 ?? Thanks!

I've replied to this in the Install section of the forum...

Global data charges with data roaming OFF

I have an issue with both my iPhone 4 and 4S getting incoming global data "leakage" I will call it.
Both are running iOS 6.1.3, which is the latest software update. Both phones are used fairly regulary along the San Diego border with Mexico, and often times on the Mexican side within 2-3 miles of the border. My phones are always set as follows: "Cellular Data -> On" Roaming = "Voice Roaming -> On" and "Data Roaming -> Off" with the iPhone 4S also having "International CDMA -> On"
However, both phones consistently receive incoming global data hits in very minor amounts (0.1 KB to 5.5. KB) when they are in an area where the signal is switching between my USA carrier (Verizon) and the Mexican cellphone towers. I know this because almost every time it happens it is when we are crossing the border or close to the border where the towers are competing for the signal to my phones. In one case I watched as my iPhone 4 switched from Verizon 3G to Extended network and shortly thereafter I received a push notification (message) from my WhatsApp application. The next day it showed the hit on my daily usage as a 6.9 KB hit even though data roaming was set to OFF.
Please don't respond to tell me that the solution is to switch Cellular Data -> Off when I am near the border. I already know this will solve the problem, but the issue is that we want to use the full functionality of our phones in this area as our employment and our residence is right along the border and we don't want to have to suspend data completely every single time we cross the border, which is nearly every day.
The data hits have thus far been in the range of less than 500 KB per month total (almost no impact at $5 per MB) so my concern is not so much with the minimal expenses incurred, it is more the principal of the issue and the problem.
I want to know if there are other users experiencing the same issue so I can have some more evidence to get Verizon to push Apple for a fix. Apple iPhones have consistently had "Data/WiFi/Roaming" issues on its phones since 2008 (or more as far as I can tell) and I believe this is a related issue that has never fully been fixed.
Thanks in advance for your replies of similar situations, regardless of what country this happened in.

Thanks for clarifying. I do hope you had a wonderful trip! You mentioned you were turning the cellular data on occasionally to use a little data. When your data is turned on, even for just a few minutes, your phone sees that connection as a window to look through your applications for any notifications that you've missed and download email and other messages, occasionally resulting in a significant amount of data usage. What were the countries that you visited? When you log in to view your statement on http://bit.ly/xB4iTc, does it show you had a $25 Global Data or $29.99 Global Value plan for any part of your trip?
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

What else do I need to configure my wireless with AirPort Express?

This is what I have. iMac PowerPC G4 (2.1) without Airport Card, AirPort Express and a couple of laptops with Airport capability. Is there any way to configure wireless for all computers with what I have?

Would that be an AirPort card?
If the clock speed of your iMac G4 is 700 or 800 MHz, it is ONLY compatible with the original 802.11b AirPort card. It is NOT compatible with the AirPort Extreme card.
If the clock speed of your iMac G4 is 1 GHz or&greater, it is ONLY compatible with the AirPort Extreme card. It is NOT compatible with the original AirPort card.
If you need the AirPort Extreme card, it is still made and sold by Apple.
If you need the original AirPort card, Macsolutions.com seems to have some.

Master Data modeling with data from several source clients

Hi people,
We have a modeling issue at hand..
From several R/3 sources, separated as Clients (eg. client 100, 101, 102 etc.) we will load data (transactional and Master Data) to one BW system.
Now, I am wondering what is the best way to avoid Master Data issues here, when data can be different for the same objects in the various source systems (clients)
Example:
In source client 100, 0MATERIAL 1000 = PLASTIC
In source client 101, 0MATERIAL 1000 = WOOD
I have tried to understand how compounding with 0SOURCESYSTEM works, but I can't see how that will work for us, since we may have several clients on the same sourcesystem (e.g. client 100 and 101 can be on the same system). This would not help me separate the masterdata.
- Does anyone have experience with this they could share?
- Is it a possibility to add 0LOGSYS or something to our InfoObjects that we will load?
- Do we then add the InfoObject to the cube in the end?
Any inputs that can clarify this is appreciated. Points awarded ofcourse!
Cheers,
Jon A.

Hi,
Donot go with one server to define it as a source system .I mean ,Even though you have only one R/3 server . you have 3 clients in it. So go with Clients to define the source systems.
So in BIW You must have 3 different source systems in Source system tree. Am I irght?
So all of them has different logical system names.
So use 0LOGSYS as compounding characterstic.
With rgds,
Anil Kumar Sharma .P

Need Help Configuring Membership Website with External Approval Process

I am working on configuring a membership website for a group of scientist. Here are the interesting requirements. Any brainstorming would be helpful.
1 - A prospective member applies online. Within the application the prospective member has to include a reference for previous work proving his qualifications and naming a reference to confirm the qualifications. The prospective member has to include the reference's name and email address. (Site visitor creats a new user-submitted webapp item, easy enough.)
2 - The application needs to kick off a workflow to an external site visitor (someone who doesn't have a site login). This reference needs to confirm of reject the prospective member's qualifications.
3 - If the external site visitor approves the reference, then the membership director needs to be emailed of the approval. This approval should then kickoff another approval process to ask the membership director for his approval.
4 - If the external site visitor rejects the reference, then the membership directory needs to be emailed the rejection notification. (If the reference rejects then there will be some sort of appeal process or ability to start over or submit a different reference.)
5 - If the reference approves and the membership director approves, then the prospective member is notified and submitted an invoice to pay. His memberhsip is not active until he pays.
6 - Once the member pays, then he appears in the online directory.
7 - The member will also be able to login and edit his profile as needed.
That about sums it up. Any ideas??
THANKS!

1. Do I need to connect the two base stations via an ethernet cable?
OR
Can I simply plug the second base station into a power outlet in any room, along with the external hard drive connected to it's USB port?
Airport Utility would not even recognize the second base station unless it is using an ethernet LAN-to-LAN connection. (It would not recognize the second base station with WAN-to-LAN connection.)
You basically have three choices here that will allow the second AEBSn to share the attached USB HDD:
Wired: Interconnect the two AEBSns by Ethernet; reconfigure both base stations into a roaming network.
Wireless: Configure both AEBSns for an extended network. Note: This is what Lowell Tuttman is referring to.
Wireless: Configure the second AEBSn as its own wireless network. This would work but would require network clients to switch network to access the drive or access the Internet. Not really practical and not recommended.
The following Apple Support link provides very detailed information on setting up either a roamng or extended network with multiple AirPorts.
2. Since I don't really care about the second base station utilizing the internet connection, do I set it up in Airport Utility as "create a new wireless network"?
This is the current setting and I have a steady green light. However, Time Machine does not recognize the disk.
In the first choice I provided, the second AEBSn would be configured to both "Wireless Mode = Create a wireless network" and "Connection Sharing = Off (Bridge Mode)."

Help needed to configure WVC54GC cam with BEFW11S4 router:

OK...I have to admit that I'm finally having to ask for help! I'm handy with most computer problems, but i.p. addresses, port forwarding and dns stuff is kinda over my head. I need someone to walk me through the steps. I've got the camera setup to the point that I can view the image in the Linksys setup, but I want to be able to share it on the net. I'm stumped with how to do this. I'm told I need to forward ports on my router etc. I've been into the router settings and there is no "gaming tab" as is suggested, but I can find port settings under advanced, although they look different.
I've also setup an account with DynDNS updater,as I'm told I'll need this to maintain a connection. The settings in there are equally as daunting, so any help here would also be beer worthy....LOL!
Any help would be MUCH appreciated!
Cheers!

Once you login to your Router setup Page.... on the Very Right Side you need to click on the Advance Tab and then you need to click on the Forwarding Tab and Below you can Open the Ports for your Camera.

Visio Drawing Using Data Graphics with data that has a field that contains Multiple Values.

I am working on creating a drawing for SMTP connectors. I decided I would use a Data Graphic connecting to a spreadsheet. In the spreadsheet there are a few fields that are Multi-Value fields. For instance SmartHosts contains multiple Ip
address. I am trying to get this to format things so that the IPs show on the next line down instead of continuing on the same line until it wraps.
Does anyone know a way I could do this?
Jeff C

Hi Jeff,
Arrange the IP values in spreadsheet using Alt+Enter (Use this key pair as a separator between two IP values). Now link this spread sheet to Visio. The values should appear in the same manner in data graphics as your expectation.
Let me know if you meant something else.
Thanks,
Dheeraj

ATA 186 needs assistance configuring to work with SIP

Hello. Just got ATA 186. I would like to use it as SIP FXS. I already have FXO with the POTS plugged in. I don't want o use the gateway or the gatekeeper. I would like to configure it to be IP dialing. II am running SIP image ATA030201SIP050616A.zup. Any help is greatly appreciated.
George

Hello, already replied in another thread, please do not open duplicates.

NEED HELP configuring wifi sync with iPhone4

Ok, I've updated my iPhone4 to iOS 5 and I have the latest version of iTunes. It looks as if wifi sync should be working fine, but when I go into options, my phone tells me that the phone will sync the next time that it's plugged in and "ComputerA" is available. The problem is that I don't want it to sync with "Computer A", the phone was updated and synced and used exclusively with "Computer B"... "Computer A" is completely decomissioned with a toasted power supply and shouldn't even be part of the equation here... but I'm not given the option of selecting any other computer for the wifi sync to look for.. everything is "greyed out" and cannot be edited... anyone else have this problem? Anyone know how to fix this problem?

You can try putting into the phone the fields you see in Outlook in the +Tools > Accounts+ window. Use the various buttons (Advanced, Edit) to dig down and see your Exchange server and username. The iPhone needs those when you try to set up an Exchange account on it. However, this info alone wasn't enough for my phone to "verify" the Exchange account. I eventually gave up.
I believe I.T. must do something on its end to allow remote devices to tap into the particular user account. In my company they do this if you have a Blackberry but not for anything else.

Help needed to configure H-REAP with local switching

Hi All,
We are using following devices for campus Wi-fi.
1. WLC - 4402
2. AP (1131ag, 1042n) which support H-REAP.
I want to configure HREAP central auth and local switching. I have enabled from local to HREAP after that I go to HREAP tab and native vlan 1 (by default)(I have changed native vlan 1 to 51.) vlan support is enabled. then click on vlan mapping and my wlan (guestwlan) is there with vlan id 24.
I have assigned static IP to AP (192.168.51.40/24 gw 192.168.51.254).
DHCP is running on controller.
switch port configure is below:
interface FastEthernet0/18
description WiFi access point
switchport trunk native vlan 51
switchport mode trunk
no ip address
end
Issue : authentication done through RADIUS (Cisco ACS 4.2) but no getting IP address from DHCP.
Please help.
Thanks in Adv.
Thanks,
AS

Hi AS,
Do not use the DHCP on the WLC.
Use a DHCP on the neighbor swtich if possible for the native VLAN.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Populating BW datasource with data using Webservice without PI (=XI)

Hi all,
I have got BW datasource and I want to be able to use external Webservice's method to populate my data source with data.
I have created client proxy in BW ( se80 --> Enterprise Services --> Client Proxy ) for my wsdl and logical port in SOAMANGER for my proxy.
I have also created datasource.
Now I need to use one of the methods of the Webservice (proxy ) to populate my datasource with data. This is the bit I am struggling with.
I had a look here on SND but I could not find anything useful. Can you please advice ? Any examples ?
Please let me know whatever you know and maybe helpful.
Feel free to ask questions if I am not detailed enough in my description of the problem.
Regards
Agnieszka Domanska
Edited by: Agnieszka Domanska on Nov 10, 2010 5:41 PM

I have now been able to call a method of the Webservice by writing the simple code:
DATA:
Reference variables for proxy and exception class
lo_clientproxy     TYPE REF TO ZCO_ICAMPAIGN_MASTER_SERVICE,
lo_sys_exception   TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
   ls_request         TYPE ZICAMPAIGN_MASTER_SERVICE_GE25,
   ls_response        TYPE ZICAMPAIGN_MASTER_SERVICE_GE24.
Populate the Request of the SOAP Object
ls_request-CAMPAIGN_ID = '74500'.
****Create the Proxy and Call it.
CREATE OBJECT lo_clientproxy.
TRY.
    CALL METHOD lo_clientproxy->GET_EMAIL_CAMPAIGN_SUMMARY
      EXPORTING
        input = ls_request
      IMPORTING
        output = ls_response.
CATCH cx_ai_system_fault INTO lo_sys_exception.
Error handling
ENDTRY.
COMMIT WORK.

Parameters need to configure Data Guard with Data Guard Broker

Similar Messages

Maybe you are looking for