Parameters to be set for Oracle repository

Hi ,
My Oracle DBA are in process of setting up a Oracle 10g DB as repository for business objects . I am not finding any docs which tells best practices for configuring oracle database like character set , nls parameters etc .
is there a set of document which I can give to my DBA or any best practice guide ?
Thanks
Manu

Hi Manu,
There is not much out there. Basically you have to set NLS_LANG to a UTF-8.
The CMS must have
User with the following privileges enabled:
u2022 create session
u2022 create table
u2022 create procedure
Alternatively, a user with the CONNECT and RESOURCE roles enabled, and the Admin Option setting disabled for both roles.
There is a installation guide that contains some info.
https://websmp103.sap-ag.de/bosap-instguides
You might also have a look at deployment guide
Hope helps
Alan

Similar Messages

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Separate Discussion Forum for Oracle Repository now available!

Questions regarding Oracle Repository (installation problems, runtime problems, usage issues, etcetera) can now be posted to the new forum called 'Oracle Repository'. Click on 'Discussion Groups' on top of this page, and look for 'Oracle Repository' in the Products section.
From the welcome message of this forum: "Please use the Oracle Repository discussion forum to ask questions, give feedback and share experiences in the use of Oracle Repository. Of particular interest is the use of Oracle Repository to perform Software Configuration Management. Oracle Repository Product Management will monitor the forum."
kind regards,
Sandra

Refresh - the Repository forum is the best place to post questions about the Oracle Repository.

Classpath setting for oracle classes 12 in unix environment

hi all,
i am trying to exceute java program with JDBC statements in it. I am running the code on a remote machine which has both JDK1.4 and oracle 9.i installed .I am accessing the remote machine through PUTTY .can any one suggest how to set the classpath in UNIX environment for oracle.
Thanks

Same way you do it else where:
java -cp <classpath>

Recommended OPEN CURSORS setting for Oracle serving a web app

G'day
Hopefully Phil is still lurking here, so might see this. Or anyone else that knows about Oracle.
I've always thought the default for "maximum pooled statements" setting for an Oracle DSN - which is 300 - is way too low to be sensible for a web app (which, let's face it, any CF DSN is going to be used for!). I usually find I end up with it up around 1000-2000, depending on the sizeof the app, and how busy it is.
I'm adequate with monkeying around with Oracle, and have needed to do a moderate bit of that sort of thing in our dev environment, but I am by no means a DBA, so it's all very seat-of-the-pants.
So I'm keen to know what other people have their maximum pooled statements / open cursors setting set to for their Oracle-driven web sites/apps.
One of the reasons I'm asking is that I wonder if it might be worth while to suggest the default for CF9 is upped to 1000 or so..?
Thoughts / comment?
Adam

I personally would not set the limit any higher than 300, and I'd consider keeping it even lower.
Each pooled query / open connection is imposing resource-burdens on both the CF and the Oracle servers by creating what might be thought of as "a very crowded restaurant." Most of them are just standing around, but they nevertheless are occupying the restaurant, and the potential exists that every one of them might try to order a burger-and-fries at exactly the same time.
The "number of pooled statements" should be such that your SQL-server can actually handle that number of simultaneous requests, both in terms of active searches and of maintaining the still-open result sets. Beyond that point, incoming web requests should be forced to wait. Set an "occupancy limit" to your proverbial restaurant such that everyone could come in and be timely served at the same time.
Categorically, if you plot out response-time graphs about such things (SQL servers, virtual memory subsystems, and so on), they exhibit a fairly-linear performance curve up to a point, after which "the elbow- or knee-point is reached" and beyond that point it becomes exponential in a very, very bad way. I saw this happen in a batch-processing subsystem long ago on a very small mainframe: (yeah, I'm makin' these numbers up...)
Number of Jobs at Once
Completion Time per Job
1
30 seconds
3
40 seconds
8
9 minutes
12
4.5 hours
It was just-about that bad. And what I did to (dramatically...) address the problem was to impose simultaneous-job limits on that subsystem. As long as the number of simultaneous jobs was constrained to "less than 3 at a time," a workload of 12 jobs could be reliably completed in (4 * 40) seconds, whereas if all 12 jobs tried to run at once, the computer would have reason to file a lawsuit for abuse.

Env Variable setting for Oracle 11g windows 2003 R2

Hi ,
While installing the Oracle 11g on windows 2003 R2 getting error while running the prerequsite steps for installtion.failing the env variables path. Please guide us to set up the Environmental variable for the oracle 11g installation.
Thanks..

Tippu wrote:
Hi,
Oracle version Oracle 11.2.0.1
Os Windows 2003 R2
we had set some values. though we are getting the below errors.
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
: 1023
Actual Value
: 0
List of errors:
PRVF-3916 : Environment variable name "PATH" is not set on node "laxwzcl01" - Cause: Environment variable value could not be determined. - Action: Ensure that the environment variable is set and access permissions for the Oracle user allow access to read the environment variables. Restart the installer after correcting the setting for environment variable.It's like setting any other environment variable in Windows ...
Right click My Computer, select Properties > Advanced tab > Environment variables button ...
It should be self-evident from that point.

Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

CSS Setting for Oracle Portal

Has anyone example css configuration for Oracle Portal ?

The CSS does not have any specific Oracle Internet Directory (OID) Mibs or Oracle Portal , or directory Mibs per say. It does however comply to standard MIB II Mibs vendor extinctions to configure with SNMP.

How to set or change character set for Oracle 10 XE

Installing via RPM on Linux.
I need to have my database set to use UTF8 and WE8ISO8859P15 as the character set and national character set. (Think those are in the right order. If not, it's the opposite.)
If I do a standard "yum localinstall rpm-file-name," it installs Oracle. I then run the "/etc/init.d/oracle-xe configure" command to set my ports.
Every time I do this, I end up with AL32/AL16 character sets.
I finally hardcoded ISO-8859-15 as the Linux 'locale' character set and set this in the various bash profile config files. Now, I end up with WE8MSWIN1252 as the character set and AL16UTF16 as the national character set.
I've tried editing the createdb.sh script to hard code the character set types and then copied that file over the original while the RPM is still installing. I've tried editing the nls_lang.sh script to hard code the settings there and copied over the original shell script while the RPM is still installing.
Doesn't matter.
HOW can I do this? If I wait until after the RPM is installed and try running the createdb.sh file, then it ends up creating a database but not doing everything properly. I end up missing pfiles or spfiles. Various errors crop up.
If I try to change them from the sql command line, I am told that the new character set must be a superset of the old one. It fails.
I'm new to Oracle, so I'm treading water that's uncharted. In short, I need community help. It's important to the app I'm running and attempting to migrate from to maintain these character sets.
Thanks.

I don't think you can change Oracle XE character set. When downloading Oracle XE you must choose to download:
- either the Universal Edition using AL32UTF8
- or the Western Euopean Edition using WE8MSWIN1252.
See http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJACJJ
If you really need UTF8 instead of AL32UTF8 you need to use Oracle Standard Edition or Oracle Entreprise Edition:
these editions allow to select database character set at database creation time which is not really possible with Oracle XE
Note that changing environment variable NLS_LANG has nothing to do with changing database character set:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABBGFIC

Physical Memory Tunning and Setting for Oracle 9i

Hi everyone,
I am trying to install Oracle 9i. Does anyone know that any formula to calculate the basic memory usage base on the server to get the best performance?
Thanks

First, Thanks for reply my question. The server spec. show on below:
OS AIX
CPU frequency 1504360000 Processor Speed
1916928 Amount of usable physical memory in Kbytes
RAID 5
any suggestion under this spec. ?
Thanks

What CDE parameters must be set for LabVIEW 6i Sun?

We are running LabVIEW 6i Sun using the Common Desktop Environment (CDE). We are unable to bring windows to front reliably, either through LabVIEW property nodes, the "Window" front panel pulldown menu, or by clicking an inactive window with the mouse. We suspect a CDE windowing parameter is not set properly. Any suggestions?

CDE is a window manager that runs on top of X. X is dumb and requires a Window Manager such as CDE (others include tvm, olvm, olwm, fvwm, and many more) - maybe you can try another window manager? I think Sun used to allow you to change the window manager, but I have not used it for a while.
Can you reproduce this problem on multiple machines with a fixed pattern that always produces the error? If so, we would look at it ([email protected]) if you get all the version numbers (Solaris, CDE, X, and so forth), attach the VI and any instructions to reproduce this issue. The more details the better, it makes it easier for us to reproduce.
thanks, hope it works out
ben schulte
national instruments

Patch set for oracle-8.1.5

Hi,
Does anyone know where can i get patches for bug:883333 ==> import error where schema contains synonym.
FYI, I'm currently using Oracle8.1.5 on AIX4.3.3. I'm already report this problem to Metalink but they still not upload the patches.
TQ

rdbms 815 went out of support on dec. 31, 2000.
you need to move to a currently supported version (i.e 816 or 817(recommended)).
once a product goes out of support, patches are no longer created for it ..

Parameters to be set for Oracle repository

Similar Messages

Maybe you are looking for