ParseInt gives different values for negative numbers than other browsers

Is this an known issue?
I tested in Safari 4 beta (528.16), don't know about other releases.
parseInt(-0.5) in Safari returns -1, while Chrome 3, Opera 10 and Firefox 3.5 returns zero.
How can I workaround this?

Hi,
I tested in Safari 4 beta (528.16), don't know about other releases.
Test with the official release. If you think it's a bug, you can report it at http://bugs.webkit.org

Similar Messages

P/L A/c for a single day gives different results for different users

Hi!
     We have SAP B1 8.81 (PL 09) in our office. P/L Account for a particular date gives different value for a single account (Other Income Account) for one user and a consistent value for all other users. The user in question is a super user and does not seem to pick a specific entry posted in the Other Income Account for that day thus giving erroneous result. I have checked the Trial Balance for that day and it gives proper result. Only the P/L account gives erroneous data. Could anyone help with the reason for this.
Thanks
Sreekumar

Hi Jitin,
          Thanks for your reply.
          I tried the way you mentioned. However, the result is the same.
          The entry that I'm talking about is an automatic journal entry posted through the Outgoing Payment option.
          To make it more clear, an outgoing payment to a vendor was posted on 05/19/11 for 1,42,178.32. The check was drawn only for 71,089.16 which was the correct amount and the remaining amount (71,089.16) got posted in the Other Income account. The P/L account for this date is not picking the amount of 71,089.16 in the Other Income Account.
Thanks & Regards
Sreekumar
Edited by: Sreekumar on Jan 31, 2012 5:58 PM

Creating a Material with different values for fields in Transaction MM01

Hello All,
While creating a material i will be giving a Profit Center in Sales:general/plant view, which i can see in Costing1 View. If i change this in this View it automatically changes in the other View. Is there any way to give different values in the two views or then what is the significance in showing the same field again in two different views.
Thanks,
Shashidhar.

Hi,
Its just a way of showing the data in different views for user. It doesn't have any significance.
Regards,
Sudheer.

CALCULATE_TAX_ITEM gives wrong values for Scess and HScess in PO Print

Dear Friends,
I am working with PO Print in smartforms hare the Fm CALCULATE_TAX_ITEM is gives wrong values for Scess and HEcess if I put the Gate pass (Basic Excise Duty) Manually.
And one more Issue is as if I check any line item condition taxes than imediatly when I see the print the all line items Scee and HEcess displays same which I have saw.
If there is a single line item in PO than there is no issue any way.
kindly suggest to resolve the issue.
Regards,
D Tarun Kumar

Hi,
I had the same issue, that taxes on invoice tab of PO was not printed correctly on PO form by calling CALCULATE_TAX_ITEM.
If you want to have the same tax value as komp-mwsbp, that use following form routine call before FB CALCULATE_TAX_ITEM.
perform j_1b_save_tax_fields(saplmepo) using ekko ekpo lfa1.
This is used in transaction me23n also.
Kind regards,
Tülay

Different measures use same source column but gives different values in SSAS project

I've inherited a SSAS project. I'm currentlig gaining knowledge, but do not understand this: There are 4 measures that get data from same source table and column. Example measures:
[Started]
[Processing]
[Processed]
[Finished]
All of them gets data from a table (view), and a column "Event_count" with just value 0 in each row. Usage of the measure is "Count of non-empty values".
Correctly all of these measures gives different values, but I don't understand how since they all go against the same source column. I thougt maybe they were defined in Calculated measures, but nothing there. Where or what else could be affecting this behavior?
Bonus information (problem): One of the measures is returning blank/empty, which is why started with this research at all.
Help anyone?
regards .r

Hi ,
I would ask if all the measures are under the same measure group ? It is important to know, since in the dimension usage we are creating relationships between dimensions and measure
groups .
Did you try the delete all the calculation's code and leave only the " CALCULATE ; " part ? Do the values change after deploying the slim script ?
Are all properties the same ? defaults & caching ?
Regards, David .

Customisation for PO Release (different Values for different Doc Types)

Dear Experts,
I need to configure for PO release procedure where in the Characteristics would be Plant (2 Plants), Doc Type (3 types - Standard PO, Imports PO & Capital PO) and Value (2 stage release: 0-100000 & >100000 INR for Std PO, 0-200000 & >200000 INR for Imports PO and 0-300000 & >300000 INR for Capital PO).
Please let me know where I shoud define the different Values for different Docs for the Release procedure to work properly.
Or let me know the entire procedure for achieving the same.
Regards,
MNP

Hi MNP,
You have to create different CLASSes in IMG with the possible combination of different characteristics,
EX. CLASS EKKO11 - Plant A, Doc type- Std PO, Value- 0-100000 & >100000 INR
CLASS EKKO22- Plant A, Doc type- Import PO, Value- 0-200000 & >200000 INR
CLASS EKKO33- Plant A, Doc type- Capital PO, Value- 0-300000 & >300000 INR and same for other plant
then assign these classes to the respective Release group.
regards,
Pravin

Parentheses for negative numbers in Excel 2011

I couldn't find an appropriate section for this question. Please forgive me if I posted it in the wrong place.
I've been using Excel for Mac 2011 since it came out. Up until I updated to Yosemite, formatting negative numbers with parentheses appeared in the drop down menu, i.e., right click to get format cells, click "number" tab on top, click "number" on left. There is a dialog as to how you want negative numbers formatted. Parentheses used to be an option but no more. I attached a screen shot. Help!

Same issue here with Excel 2011, problem started with the Yosemite installation and was not fixed with 10.10.1 nor the latest Microsoft update.
It's a big problem for accountants!
On the Microsoft forum this gentleman replied with a workaround but it's a hassle to have to do this for each new spreadsheet.
JonathanBuhacoff replied on November 9, 2014
If you go to the dialog shown in Phillip's post and select "Custom" on the left side, you can enter this to get the parenthesis back:
$#,##0;[Red](-$#,##0)
Or this to use square brackets:
$#,##0;[Red]"["-$#,##0"]"
The format means use $#,##0 for positive numbers and use [-$#,##0] in red for negative numbers.
You could remove the hyphen too and just do this:
$#,##0;[Red]"["$#,##0"]"
I hope Apple takes note and pushes a fix for us.

Modify List of Values for Task Numbers in standard webADI template

We are using webADI to load costs to Projects.
When User use the webADI template to load costs to the Projects, he has to enter the following data in the template -
1. Project Number
2. Task Number
3. Expenditure Item Date
4. Expenditure Organization
5. Amount
..... and so on....
User enter the Project Number first. Based on the selection of the Project Number, the corresponding Task Numbers are seen in the Task Number column.
Our requirement is, Users should not be able to select the Task Numbers in webADI whose Transaction Dates (Transaction Start Dates and Transaction End Dates) are beyond vis-a-vis the current system date.
In other words, can we modify the List of Values for Task Numbers in standard webADI template
Can this acheived.

Any help or advice?
Thanks.
Regards

Can I use a different ID for app store than icloud on iphone?

In our household we share an ID for itunes so that we do not have to buy a separate instance of an app for each device we own. This causes a problem when someone wants to use their phone to buy an app since there is a different ID on the iphone than the computer's itunes account where most apps are purchased. THe itunes account will wipe out anything that was bought through the phone every time it syncs.
So, is it possible to have the app store on the idevice connected to a separate id than the icloud stuff that is used for mail and calendar?

Yeah. I don't think that is possible. I know you can have seperate user accounts on 1 computer. But the data from each would be different.

Different format for page numbers on different pages

Hi guys,
Currently I'm about to finish my thesis. Pages has been a great help with everything, until now. The problem is that I want to add page numbers, but some pages should have a different numbering then others. To clarify here is my table of contents with the desired page numbers:
-Figures          i
-Tables          ii
-Acronyms     iii
-Chapter 1     1
-Chapter 2     15
-Chapter 3     27
-Appendix     iv
-Summary     v
So the stuff that is not directly main content should be numbered in roman numbers. The chapters then can have normal numbers.
I've been trying for a while to make this happen now, but without luck. Anyone know how to accomplish this? I would be very thankful.

Divide into Sections by inserting section breaks between and make the Roman numerals the first part and restart the numbering at Chapter 1:
Inspector > Layout > Section > Start at: 1 / uncheck Use previous headers and footers
To change the numbering format in the header or footer, right click on the page number and choose what you want.
Peter

Is it normal for a waveform graph to truncate arrays of values that are longer than others when displaying multiple waveforms on the same graph?

I am reading back values of several waveforms that were saved to disk using the write to spreadsheet vi. Some of the data sets are longer than others eg. 35 seconds vs 45 seconds. All have the same sample rate.
See the code segment below. If I select the larger files first then all the data will show. If I select a smaller file first the larger ones will be truncated to the size of the small file. I am using LV 7.0.
Attachments:
codesnippet.vi ‏41 KB

I needed to make some grammatical/ nomelclature changes, But, Could not edit the previous post.
so posting again
"Thats because you are inserting into an array of a predefined size.
For ex,
When you try inseting a 1D array 'A' of 50 elements as row 1 of a 2 D array of 40 elements(in row 0 ), only only the first 40 elements will get insetred into 2 D array. You lose the last 10 elements of array 'A'
To avoid this, I suggest you use XY graph( of course you have to create an x axis with the index of each element in the inserted array and plot on xy graph).
Any doubts, do get back"
regards
Dev

Maintaining different values for Accounting Type (KOART)

Hi experts,
I have several accounting tcodes such as FBV0, FB03, FB08, FV65,FV60 in one parent role.
FV60, FV65 are added to this role as FBV0 is checking internally for this authorization object.
All these tcodes share a same object F_BKPF_KOA which differ by activity and the accounting type (KOART).
The KOART field is an org level field defined by SAP and I have entered D,K,S as values.
But the auth object values should be different for the accounting types.
i.e 03 for D,K,S
01,02,03,77 for S
03,77 for K
All the derived/child roles for this parent should also have the same document type as the parent. How can I achieve this as this object is maintained at the org level.
I could not delete this obj from being an org level element as it is defined by SAP.
Appreciate your response.
Thanks
Kee

> If KOART is an org field you cannot differentiate between authorized activities for each of the KOART values in one role. Whether you maintain values in the parent or not only matters if you're planning to assign the parent roles to users or if you just use them as templates.
>
Parent Roles should not be assigned to any users. It should only be used as Template to grant and control Non-Organization Level authorizations centrally (you can see these option in Parent roles). Concept of Parent-Child role is to avoid creating same roles where all authorization field values are exactly same and differs only for Organization Values (different Site / Branch Office specific constants). So we can maintain the Org. levels as different sets for a single Parent role as I already explained.
For more details: Note#314513 - PFCG: Maintaining individual organizational levels
Note#532695 - PFCG: Incorrect organizational level values in derived roles
>
> Please elaborate on this one. I think we're running into an urban myth here....
>
> Organizational levels are only instruments to assist in building roles. For the final profile it does not matter whether a field is organizational or not. It will not influence the behaviour of the authority-check.
For the final profile it matters during loading of User authorization data to User Buffer. Think about the Parameter values stored for a particular user. How it behaves for all Objects containing a particular Auth. Field and providing default assignment for that user whenever he tries to perform any action where this field is required to populate.
If we delete any Object from SU24 proposal then it doesn't mean that the check will not be carried out or the Org. Field contained in that object will not be populated with it's values. I tried to make this clear to the requester.
Regards,
Dipanjan
Edited by: Dipanjan Sanpui on Jun 8, 2009 7:49 AM

How do you subtract different values for specific array elements?

Hi LabVIEW Community,
I am new to LabVIEW and Im working on my first application. One of my challenges that I am having problems solving is how to subtract specific values from specific elements in an array.
My aplication is to measure the distance between a sensor and a magnet, however the initial distance for each sensor to magnet is different. I have converted the voltage to a distance using the Math Node for each element and now need to correct these values by subtracting their individual initial value.
The source is a 1D array of DBL64 consisting of 32 elements and each of these values needs to have a different value subtracted.
eg:
Element 1 - 5.557
element 2 - 2,34
element 3 - 7,654 and so on
I have tried to seperate (index the array) and subtract the values from each element and then combine them again. This has not been effetive. I need to write these values to an .txt file and also use them in another calculation.
I have attached my attemted sub VI.
Any advise would be really apprecieated.
Solved!
Go to Solution.
Attachments:
Sub VI Split Array_Correct Distance.vi ‏36 KB

You don't need to overthink it. There's a really simple method. Generate an array that contains all your offsets you want. Then subtract it off.
It's the same VI with this change:
Attachments:
Sub VI Split Array_Correct Distance_LV12_MOD.vi ‏24 KB

Different values for threshold array?

Hi, I am collecting measurements from 8 fluxmeters in an array of 8 elements and graph them in a multi line chart.
The fact is that some measurements return bad values due to bad transmission or bad reading from the (OLD) instrument. So, those wrong values are under or above the 50% of the real value (or the same, of the setpoint value).
Only a wrong value between 2 good values is collected (only a peak at time), so my goal will be:
if a > or < 50% of the real value (or the setpoint) is collected and both the value before and the value after this wrong reading are good I would replace the wrong with a correct value (say: with the previous or with the setpoint) in order to have a smooth chart shape.
I started to use threshold array vi but I need different threshold values for all 8 array positions because all 8 fluxmeters could have different setpoints.
Not able to solve...and probably I will need to collect at minimum 3 readings before filter wrong values, so I suppose I'd have to fill a 8x3 matrix (?)...

I don't think that the threshold array primitive is the right choice. This function interpolates the array and finds the fractional index. It assumes that the data has a slope. It doesn't sound like your data would meet this criteria.
You just need to find the "bad" data points and replace the value with a reasonable value. (maybe the average of the two data points on either side)
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

CALCLATED KF SHOWING DIFFERENT VALUES FOR DIFFERENT CURRENCY TYPES

Hi Experts
When I am executing the query( On a Multi provider) with the selection of Company code, controlling area, WBS ELEMENT, currency type I am seeing two different values (XXXX EUROS and YYYY EUROS)for a formula for total variable cost when i select two different currency types( CONTROLLING AREA AND GROUP CURRENCY)
I have two currency types called CONTROLLING AREA CURRENCY and GROUP CURRENCY(BOTH IN EUROS).
This WBS element is not having any sales document.How can I see the exact value for this WBS element in the R3 side.
Is there any possibility that the same dataelement TOTAL VARIABLE COST have different values when i execute with differnt currency types in the selection screen.
In what approach can i proceed from R3 side to the query to solve this issue. on the R3 side when i see in FB03 (settlement posting) for this WBS it is balanced. I am seeing only partial posting for this in the Query
Could any one help me to solve this.
Thanks in Advance
Best regards

Hi Rajesh,
I guess the holiday which was configured in Holiday calendar (Holi) is not declared as Paid holiday in Public Holidays-Holiday Calendar.
Goto SCAL - choose Public Holiday - change mode - look for the holiday (Holi) configured - change mode again - lookout for 'Public Holiday Class' and see whether ' 1 ' is maintained there, if not maintained, type 1 there and save it.
PS (1 - Ordinary Public Holiday....i,e paid holiday).
Now go to PT01 and generate WSR. This will sort out your issue.
If the above is not working,
I guess there are different PSA/ESG grouping for the employees and maybe their Holiday Calendar itself is different. check out whether the PSA and ESG grouping in Time Mgmt is same or different for those employees for whom the paid holiday is not getting generated and also check out the Holiday Calendar for these set of employees and try the above given solution there.
Hope this helps.
regards,
Santhosh
Edited by: Santhosh on Mar 31, 2009 11:34 AM

ParseInt gives different values for negative numbers than other browsers

Similar Messages

Maybe you are looking for