Partial quantity in J1IG(depot invoice)

Hi All,
I have a requirement where clients want to pass duty for partial quantity from GR. Kindly let me know if we can process partial quantity. If yes will RG23D register updates that quantity.
I tried doing the same but i got an error "Qty check failed for item 0001. Enter qty equal to GR qty in More docs".
In challan quantity if i put say 50 quantity out of 100 its giving above error.
A strange scenario is happening there. The UOM is taking as ST in challan quantity and PC in received quantity.
If I process with 50 ST it is taking and updating the register but not 50 PC.
Please guide me.
Thank You..

Hi,
Please you got the stock from Manufacturing plant to Depot (j1ig), system will show the invoices list in J1IJ (select the line item and click on Get Excise invoice)Push button and you have to select the invoices from the listand click on continue
Thanks.
Raviteja

Similar Messages

  • Does Transfer Invoice Price Variance pro-rate for partial quantity ?

    We were planning on using Transfer Invoice Price Variance to Inventory but unfortunately, we find when there's an IPV for quantity that's partly issued - the variance is not pro-rated but entirely applied to the remaining quantity.
    Just wondering if this is desired functionality and if so, could we use SLA to ask the program to pro-rate the variance and for partial quantity, apply the pro-rated amount to the quantity remaining and the rest to the Cost Variance account.
    Thanks,
    Sanjib

    TIPV to Inventory doesn't pro-rate for partial quantity.
    It transfers the entire IPV to the remaining quantity.

  • Partial quantity check by the system in third party sales

    Hi
    In third party sales , i created one third party order for 100 quantity and i did MIRO for 89 quantity . Now when iam doing the billing with reference third party order how system will know that i did miro only for partial quantity
    where is the check that system will check the miro quantity and allow that quantity for billing . Where exactlythe link between the sales order and MIRO document

    Hi,
    It's in copy controll VTFA
    got item level >>> Slect item category >>> details >>> put billing quantity as - F (Invoice reciept qty less invoiced quantity)
    Kapil
    Edited by: Kapildev Farakte on Jan 19, 2010 9:31 AM

  • At time of return depot invoice creation , not capture Excise Condition Value

    Hi,
    my queastion is that
    In retun process from Customer to Depot,
    when user create return Depot invoice through t-code VF01 then  Not capture Excise Condition Value (  JEXP - Basic Excise Duty ,  JCEP- Edu.  Cess Duty and JA1X - Additional tax. ) at time of Depot. Invoice Creation.
    we can also check  Table J_1IRG23D, in this table have value of these Excise Cond. Value.
    But Delivery No. is not update in table J_1IRG23D.
    and I applied  condition formula 356 in Procedure ZDOM02 ( Traders  Pricing Procedure).
    How can capture condition value of JEXP, JCEP and JA1X  at time of Retrun Depot Invoice Creation ?
    Guide me  .....

    Hi,
    I have  flow your define step:
    Returns from Customer to Depot
    1     Create a return order in Depot
    2     Key in the invoice number and execute
    3     Assign Order Reason and save
    4     Create a return delivery  and do PGR.  Maintain storage location 1030
    5     Create Transfer posting in MB1B with movement type 453, storage location 1030 and save
    6     Note down the material document reference
    7     Go to J1IG to reverse excise issue posting
    8     Click "Capture"
    9     Key in the material document number and  series group
    10     Click "Details".  Now select the line item and again click "More documents"
    11     Key in the original excise invoice reference created at supplying plant
    12     Skip all warning message and go back
    13     Maintain the internal number and the year.
    14     With this, entry from RG23D will be reversed
    But still the excise condition values are not being captured during invoice VF01 and std depot routing 356 is being used.
    Program name of depot routing  is  FV64A356.
    we can also check  Table J_1IRG23D, in this table have value of these Excise Cond. Value.
    But Delivery No. is not update in table J_1IRG23D.
    Guide me.........

  • Mile stone billing with partial quantity.

    Hi,
    We are facing problem in the milestone billing. we have scenario where we have payment terms (Ex: 10% advance, 70% on delivery, 10% on installation and remaining 10% on completion) with the materials having multiple quantity. Delivery will be in partial, so except the advance invoice all the remaining invoice require change in the billing quantity before billing, but in the system billing quantity showing in gray mode. After delivery also remaining (10% installation) also will be on different quantity i.e. actually installed at the site.
    As per the law invoicing has to be done with in the 14 days of the installation of the work, once the installation over for partial quantity we required to do the invoice irrespective of the delivered quantity.
    In the system if we do the invoice for the total quantity at the time advance after that we are unable to change the invoice quantity in the subsequent invoices.
    Please suggest us how to make enable the billing quantity field in case of milestone billing.
    Ex: let us say sales order is created for qty 10 with the value of 1,00,000.00 as payment terms as follows.
    10% Advance, 70% on delivery, 10% on installation, 10% final completion.
    First we have raised the 10% advance invoice using 1st milestone with the total quantity.
    When we deliver, we deliver only partial quantity i.e. qty. 5, so we have to create the invoice for (50,000-5,000) Rs 45,000. But when we create the second invoice we are unable to change the billing quantity. Same way when we create the third invoice after installation we may have to bill for qty. 3 if only 3 machines are installed out of 5 delivered, so again we require the quantity change.
    Regards,
    Upendra
    +919824795543

    hi
    Milestone billing means distributing the total amount to be billed over multiple billing dates in the billing plan.
    As each milestone is successfully reached, the customer is billed either a percentage of the entire project cost or simply a pre-defined amount.
    During sales order processing, the system determines from the item category whether a billing plan is required and, if so, which type of plan
    The type of billing plan that is determined at this point is set up in Customizing and cannot be changed in the sales document.
    Billing plans for periodic billing and milestone billing plans for project-related milestone billing have different overview screens so that you can enter data relevant to your
    processing.
    For example, for milestone billing, you must be able to enter data to identify the individual milestones.
    IMG configuration requires :-
    1.  Maintain billing plan types for milestone billing in OVBO.
    2.  Define date description in SM30 - V_TVTB.
    3.  Maintain Date Category for Billing Plan Type IN OVBJ.
    4.  Allocate date category in SM30 - V_TFPLA_TY.
    5.  Maintain date proposal for Billing Plan Type in OVBM.
    6.  Assign Billing Plan Type to Sales Documents Type in OVBP.
    7.  Assign Billing Plan Type to Item Categories in OVBR.
    8.  Define rules for determining the date in OVBS.
    Milestone billing is typically used for billing projects, such as plant engineering and construction projects. Such projects often include a series of milestones that mark the completion of different stages of the work. In the SAP R/3 System, milestones are defined
    in a network along with planned and actual dates for the completion of work. The milestones are also assigned to the billing dates in the billing plan.
    Each milestone-related billing date is blocked for processing until the Project System confirms that the milestone is completed.
    Delivery-relevant order items for which a milestone billing plan applies are billed on the basis of the requested delivery quantity and not on the total of the confirmed quantities.
    Reward if USeful
    Thanx & Rerards.
    Naren..

  • Partial quantity to be billed in order related billing ?

    Dear all,
    We have a situation where we need to bill only partial quantity for a order related billing.
    Current strategy is to create a release order kind of document and then bill that. We want to avoid this. Is there any possibility to directly copy the quantity to billing document and change it in the billing document?
    Regards,
    Balaje Raam

    Hi abdulshaik,
    Yes it is possible to create 2 invoices for the 2 line items in order.
    --First do the customization as per the Mr. Lakshmipathi said
    --Go to VTFA copy controls
    --Select your Billing Document & Order Document
    --Click on item level  in Data VBRK/VBRP --assign routine of 006 limited single invoice & save it
    --Go to T.Code VF01 & enter the order no
    --You will find two line items. select the both line items & click on split analysis
    --Now you will find two invoice no with the same order.
    Let me know if your problem is solved
    Regards
    Pradeep

  • Partial quantity when do MIRO

    Dear Experts,
    My requirement is that we not activate "External Services Management", for service we use normal account cat (not D) and input quantoty = 1 UoM.
    When GR, it's always full which is 1 UoM.
    Problem is when we do MIRO there is many partial invoices from vedor and AP staff has to change quantity to tie with invoice amount (calculate protion) which is difficult to user.
    For now we planned to input quantity same as amount (concern is MM report and tolerance to block invoice).
    Your advice would be appreciate.
    Thank you in advance,
    Kaew

    Hi
    The workaround as you have mentioned is the only solution ,Mentioning the Vaule in the Quantity feild & vice verca,
    As far as the reporting is concern you can create seperate document type for such kind of materials,so that while consolidating the Final MM reports the Changes of the Quantity & value feild can be taken care.
    Also follow the GR base IV in this scenario.
    Regards
    Manish
    Edited by: Manish Kumar on Nov 3, 2010 7:01 AM

  • Partial Quantity and Line item not showing in MIGO

    HI All,
    My User create STO and after save it is automatically created OBD and PGI through BARCODE now problem is at the time MIGO it is take partially quantity.when i going to do manually rest quantity it is not showing all line items.
    Issue 1. It is showing only one line item instead of two line item Qty.
             2. When i am going to select purchaseorder at migo instead of OBD its showing two line item.
    Please suggest what to do.

    HI Please check i am sending screen shot

  • Display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price  against each line number

    hello all,
    i have an ALV report requirement like this,
    on the initial screen i have displayed(for a given agreement number like in ME33K )
    in the selection screen i have taken agreement number as EKPO-EBELN.
    purchase document number        item number        short text        target quantity      net price
    5400000019                                  1                      xxx                  1.000                  304300.00
                                                        2                     xxxx                 1.000                  500000.00
    the above fields i have taken from EKPO table.....
    and on double clicking the  item number i have displayed
    line number          service number       short text           quantity    units    gross price   quantity released
    1                           swr10                   xxxx                 2.00          kg          500             2
    2                           swr11                    xxxx                5.00          EA         500             2
    the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge  etc......)
    this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
    now my question is i need to display  Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
    against each line number above.....
    from which table do i need to take these fields.....
    please guide me....
    thankq....

    Thanks Andra,
    The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
    Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
    Thanks in advance
    Edited by: Metroid01 on May 14, 2009 6:52 PM

  • Approving Partial Quantity in ML85 for Service Entry Sheet

    Hi,
    Is it possible to approve partial quantity in ML85(or any other screen) for Service Entry Sheet?
    Thanks.

    Hi,
    I dont think it is possible to approve Entry sheet for partial quantity. Release strategy for Entry sheets are at Header level and not item level.

  • Depot Invoice Reversal issue

    Hi,
    In depot invoice cancellation process,one user has deleted the delivery before cancelling the Exise invoice.
    Because of this reverse qty & duty has not updated in the RG23D register.
    Pls help to resolve this issue.
    Harsh

    ok

  • Is it possible to accept partial quantity in a bid??

    Hi everybody,
    Is it possible to accept partial quantity in a bid??
    For example, I create a bid for 10 pieces. A vendor makes a bid for the 10 pieces. For any reason, I only have money to buy 9 pieces, so, Can I accept only this 9 pices??
    Thanks,
    Ivá

    Hi,
    SRM 5.5 supports accepting partial line item quantities as well as you can accept few of the line items (say 2 out of 4 lines of the BID).
    You have to click change first in the BID, then you can delete the items you do not want to accept, then manipulate the quantities for the items (system recalculates the value automatically) and finally accept the bid.
    Regards
    Kathirvel

  • Problem in creating Depot Invoice

    When I am trying to create a depot excise invoice using j1ij, System is throwing the following message at the time of saving :
    Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV. I have maintained the number range in J1I9. Can someone please help me with this.

    HI,
    Check the cin configuration Excise group details button depot configuration is activated or not
    or go to snro and give your excise group and maintin the number ranges.
    Thanks,
    Vasu

  • System is not receiving partial quantity in MIGO.

    Hi Everyone
    During receiving the partial quantity in MIGo,system gives me following error.
    Deficit of PU Ordered quantity 5 BAG : 2000380 1000 1002 GREEN TIP
    Can u please tell me to get rid of this error so that the system could receive the partial quantity against PO in MIGo
    Regards:Vijay

    Hi,
    Check on it:-
    partial gr quantity can be cancelled or reversed
    SAP MIGO Partial Goods Receipt of a PO then after close PO
    pherasath

  • Component pick release for partial quantity

    Hi All,
    For R12 environment , customer needs move order to be created for partial quantity using component pick release.
    As far as I know component pick release cannot be done for partial pick release and only possible when onhand qty is not available.
    Can any one pleas elet us know if we can have any alternate solution or easy customization so that client can edit the quantities before going to move order creation?
    Thanks
    Vasudha

    when the move order is created..update the allocation and then perform transact move order
    ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
    HTH
    Mahendra

Maybe you are looking for