Partial Reversal of Reservation components

Dear Experts,
Can anybody give us way out for following scenario.
Scenario:
01. Transfer posting done against reservation having say 10 components ( A, B, C, D, E, F, G, H, I & J ).
02. Consider each Item has Qty 10 PCs
Requirement:
01. Partial Reversal of components for B = 2 PCs & G = 5 PC against the same reservation.
02. We want to do the above reversal in background.
Can anybody suggest the BAPI or anything which will help us.
Thanking you in anticipation
Aniruddha

Hi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory

Similar Messages

  • Partial reversal of a goods receipt from process order

    Dear All
    Could anyone please help me with explaining how to do a partial reversal of a goods receipt from process order? If Iu2019m using trans CORS I have to cancel the entire operation, which I donu2019t want to do. If Iu2019m using MIGO and MT 102 I only reverse the goods receipts of the produced material, the corresponding components from the BoM is not reversed with MT 262 as they are if I cancel with CORS, and I donu2019t want to do a second MIGO transaction in which I cancel the components with MT 261. I have also tried to create an operation with a negative quantity, but without any success.
    Itu2019s not an option for the business to reverse the entire quantity and then perform a new goods receipt with the right quantity.

    Hi again,
    I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
    Anyone who can help me on the way?
    /WM consultant on unknown territory

  • Partial reversal of statistical posting

    Hi,
    I am using statistical posting (F-38) for posting Letter of Credit  (LC) into books of accounts. Now when LC is disbursed, part disbursement takes place over the period. So i have to reverse the LC created in part. I tried F-19 (reversal of statistical posting). But by using F-19, i am unable to reverse the document in part amount. Let me know how it can be done ?

    Hi Deepak,
    Partial reversal is not possible.
    Regards,
    Kiran

  • Partial reversal of ARE-1 certificate

    Dear All,
    Can anybody tell me, if it is possible to reverse an ARE-1 Certificate partially but not for the entire document.
    Rgds,

    Dear,
    In what business senario you want to do partial reversal. I think you want to do quantity to quantitiy amemndment in that case
    If the customs officer noted a shortfall in the quantity of goods, the excise clerk entersthe shortfall as well. Since the where abouts of the missing goods cannot beaccounted for, they no longer qualify for exemption from excise duty. Your company
    is therefore liable for the excise duty on the shortfall, plus interest, backdated to the date when you removed the goods from your premises. The clerk specifies which excise registers to pay the excise duty from.
    Regards
    RKS

  • Partial Reversal or Clearace of Bill Liability in F-20

    Dear Team,
    We have new scenario & realised one bill but partly.We want to reverse
    the same in F-20 & thing is that how we can make partial reversal of
    the bill liablity because bill not realised completely.When we selected
    reference bill in F-20 but there is no option for reversing the partial
    part ..Please let me know that SAP has any such feature which we can do
    in screen of F-20..
    Thanks & Regards,
    Dharmveer

    Dear Ravilla,
    The document type used in F-20 is assigned to business transaction
    0200 + variant 0001 -> Revesal bill laib. Normally the customer invoice
    doesn't include an entry which is assigned to item category 04000 =
    Cash. Because of this assumption, the business transaction 0200 doesn't
    allow item category 04000 by system default and it is not possible to
    change this limitation.
    The workaround for this is to create a new transaction variant for
    business transaction 0000 (unspecified posting), define the splitting
    rule for the new combination, and then link this combination to the
    document type. I'd also recommend to create a new document type for
    this particular type of posting.
    Mauri

  • Fixed Assets Config - Trans type to partially reverse a previous retirement

    Hi experts,
    Is it possible to create a transaction type to partially reverse a prevous retirement?  When trying to create/define a new retirement transaction type I am unable to specify a balance type, as it appears a retirement always defaults to a credit balance.  I also tried setting up an acquisition transaction type, as this allows me to specify a debit/credit transaction assignment; however, I can not set it to belong to the retirement transaction type group.  I also tried creating an acquisition trans. type that belongs to the acquisition trans. type group and set it a debit assignment, and retirement for both the consolidation trans. type and asst hist sheet grp.  This transaction allowed me to debit the asset to reverse a previous retirement, but the transation display on the asset acquisitions report and not the asset retirement report.  We need this partial reverse retirement transaction to display on the retirement reports for tax reporting purposes.
    Our business users need this transaction type as they will retire assets in month 1, and then in month 2 recieve additional data that reveals the retirement in month 1 was too much, so they want to partially reverse the month 1 retirement in month 2 (so leave the original retirement transaction in place in month 1).  Is this possible?
    Thanks in advance for you assistance.

    Go to AB08 and enter company code/asset and select the month 1 retirement document and reverse
    And post a new retirement in month 2.
    After month end depreciation all values will be adjusted in GL accounts as well
    Srinivas

  • MIRO partial reversal

    Hi,
    Please suggest me whether partial MIRO reversal possible for planned delivery cost
    Regards,
    Balu

    Hi,
    As your requirement is to partially reverse the delivery cost, try subsequent credit funtion.
    Thanks,
    Uswin

  • Partially received AP reserve invoice

    Experts,
    The client is in SAPB1 88 PL=20.
    The issue is regarding a partially received AP reserve invoice that is fully paid. The open quantity  for Item =A in the AP reserve=38,400. Now in the Item Master for Item=A the open qty in the AP reserve increased the Ordered qty by 38,400 for this item.
    Doing the AP reserve invoice ---> GRPO step should correct the ordered quantity in the Item Master accordingly. This will trigger GL transactions to the Inventory account and the Intransit Accounts.
    However, the client want to get the Ordered quantity field corrected in the Item master for item A WITHOUT affecting the GL transactions. Is there any appropriate Steps in SAPB1 that I could do to minimize the GL trasactions created to resolve this issue?
    Thank you for any suggestions in advance.
    Jose

    Hi Jose,
    It is not achievable for the goal to get the Ordered quantity field corrected in the Item master for item A WITHOUT affecting the GL transactions.
    All quantities must have a cost associated with them. Otherwise you can only have 0 cost.
    Thanks,
    Gordon

  • Partial reverse of mov 313

    Hello!
    Can I do one partial reverse of movement 313?
    Best regards

    Hi,
    You canoot cancel partially this movement.
    What you can do is to create an opposite movement from the receiving storage location (e.g. original movement: from SLoc1000 to SLoc 2000; opposite mov. from SLoc2000 to SLoc1000).
    Regards,
    csaba

  • Partially reversal miro

    hii..
    we want to reverse the miro doc..
    by mr8m we can do it complete but not partially..
    tell me for partially reversal..
    Thanks & Regards
    Rekha  sharma

    Hi
    Alternatively you can issue Credit memo for the partial amount instead of reversing and reentering the same.
    Regards,
    Lakshmanan Krishnan

  • Partial reversal in STO

    hii all,
    plz let me know, how i can do partial reversal in STO.
    M using CIN, here, i have taken 10 items under STO Process and Delivery , Excise calculation , everything has over.
    now, i want to return 2 Items to Supplying plant. can u tell me how i can do it.

    Hi There
    Reversal of partial is not possible ,
    But you can use the Mov Type 557 and 558  to do the adjustments in Stock in transit qty
    Few more details on STO adjustments
    Hi There
    it can be settle in many ways,,,
    1. Receive the goods as 100 and Scrap the 5 nos from the received plant,,- If the receiving plant is responsible
    2.Revert the PGI/Transfer movement and send the 95 nos again from the supplying plant- of the Supplying plant is responsible,
    3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
    4. also you can check the below similar thread
    STO - material lost during tranfer from plant A to plant B
    5. Here is some more details
    557 Issue from stock in transit (adjustment posting)
    Only use this movement type (also the reversal movement type) under the following circumstances:
    Using movement type 557, you can correct purchase-order-independent stock in transit if
    - a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
    - stock in transit still exists, even though there are no open stock transfer orders for the particular material
    This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
    This movement type may not be copied.
    Note!
    Before using this movement type, note the following:
    - 392205 Analysis stock in transit / Correction if split valuation
    Possible special stock indicators:
    E, Q
    You can use any one of the way to solve the issue, Hope it helps
    Cheers
    Senthil P

  • STO - Partial Reversal of Goods

    Hello,
    I would like to know how to reverse the goods movement for a STO Delivery Partially. What is the movement type that i use for it.
    step 1: Create a STO.
    Step 2: Create a Outbound Delivery and do a PGI. Say 100 Units.
    Step 3: Did a GR at the receiving plant for 98 Units. 2 Units lost in transit.
    But supply plant says that they sent 100 units.
    How would i control this situation. If i will have to reverse the Goods partially by reducing it by 2 units. How can i do that.
    Thanks

    There is no way where you can reverse partial quantity against a stock transport order delivery.
    You have 2 options in this scenario
    1st option:
    1) You need to post GR for the full quantity as per the GI quantity. (this will make the document complete.
    2) Create a stock transport order back to the supplying Plant for the lost quantity.
    3) Suppply Plant needs to post GR for the lost quantity.
    4) Post a write off (scrap) document in the supplying Plant.
    2nd option:
    1) You need to post GR for the full quantity as per the GI quantity. (this will make the document complete
    2) Post a write off (scrap) document in the receiving  Plant.
    Thanks
    Sanjay

  • Partial reversal of Intra company STO

    Hi Gurus,
                 How to reverse partial quantity in the intracompany STO with delivery.
                    After make GR  we reverse the partial qty  by using mvt type 122. Then the stock will be SIT of the receving plant. How to reverse that qty in to supplying plant's stock. If we use the VF09 it reverse the whole qty.
    Pls clarify.

    Hi,
    the system behaviour is correct. With 122 you are only sending the material back from your receiving plant but the stock has not reached or been received in the supplying plant. Unlike 351, movement type 122 is not meant for stock transfer. If you see the material document you will only see one line, unlike 351 which will have a - from supplying plant & a + to the receiving plant,which is the reason why the stock goes into SIT of the receiving plant in the 1st instance.
    BR

  • J1IJ Partial Reversal

    Hi Gurus,
    We want to reverse partial sales return quantity against Depot Excise Invoice created thru J1iJ. Accordingly
    the RG23D register must be re-updated for return quantity.
    Is there any solution to do it...??? Pls let me know
    Thanks in advance
    Surya Shrivastava

    For Partial Sales return You can try J1IH , Check it helps you, In J1IH, Other Adjustment is to adjust all Debit entries and Additional Excise is to adjust all credit entries.
    Also better to follow standard procedure to handle depot returns as below:
    1. Sales Return Order
    2. Return Delivery - PGR
    3. Incoming Excise Invoice using Transaction J1IG with referenc to return Material Document(Return Delivery - PGR)
    Refer below link for more details,
    [Sales return at depot|Re: How to carry out sales return at depot]

  • Partial reversal of the payment document

    Hi gurus,
      I have a payment document A, that contains 3 invoices - C, D and E. Issit possible to reverse just invoice C in payment document A without having to do a new payment run?
      As far as I know, once you reset ( FBRA ) payment document A, invoice C, D and E will be open item and u can reverse invoice C. After that u will need to perform a new payment run for invoice D and E.
    Thanks in advance.

    Hi,
    I think you are using transaction code F110 to make vendor payment. as per your question it seems that Durring Payment run you have selected 3 invoices C, D, E for that particular vendor made one payment document for a single cheque. In this case, it is not possible to reverse one particular invoice for the corresponding  payment document.
    With regards,
    Sudipto

Maybe you are looking for