"Partner function CA can only occur 1 times in procedure TA (Sales Document

Dear Experts,
I have a requirement where I need to capture the Partner function more than once....
Say i need to capture the two or more commission agents in one sales order....
But when I enter the second comm agent the system triggers
"Partner function CA can only occur 1 times in procedure TA (Sales Document Header)
Cheers

Hi,
Go to VOPA....
1.Create Partner Functions as many as required....say PF1,PF2 and so on...
2.Assign all the partner functions to the account group.
3.mark the partners as mand or notchang in the procedure details....
Once u r done with this u can add the PF1..PF2 .....in the customer master/sales doc....
Hope this will help u.
Thanks
Ivy

Similar Messages

BDOC Error : Partner function Sold-To Party occurs more often than specified in Customizing

Hi,
I am new to middleware and would like to know how to solve the below error.
My scenario is I am trying to perform an initial download for equipment from ECC to CRM. Most of the blocks get successfully uploaded, but for a few cases I get this error.
CRM_EQ_DMBDOC: Partner function Sold-To Party occurs more often than specified in Customizing
As my block size is 50, I would like to know which entry has this error and how to fix it. Once I fix it do I reprocess the BDOC.
Please advice me how to go about this. Thank you for your time.
Regards,
Dhruv

Hi Willie,
Thanks for your reply.
I applied the Note 1762574 and tried reprocessing the BDOC but it does not get processed.
The other note 1414329 de-implements the change made by the first one, so I did not use it.
Do you have any other suggestion?
Regards,
Dhruv

I can only purchase 3 times per day,how can i turn off this sort of protection?

I can only purchase 3 times per day,how can i turn off this sort of protection?

You cannot go back, but you can fix the battery problem, which is NOT an iOS 7 problem. I've had much better battery life on iOS 7 than I have have had in the previous 6 years of iPhones. If you are not then there's something wrong with your phone, not with iOS 7.

Credit release time for a given sales document or delivery doc...

Hello Experts,
I need to get the credit release time of a given sales document or a
delivery document. What table can I get this info? Thank you guys and take care!

Hi
I think there won't be a SAP table field with the description
'credit release time ' can you be more clear about the field you need?
But you can check the VBAK and VBAP for SAles order related data
and LIKP and LIPS for Delivery related data
Reward points for useful Answers
Regards
Anji

How can i find PP Order & Plan Order from Sales Documents?

I want to trace all PP Orders & Plan Orders form Sales Documents No.(Item)
What logic can make me achive?(AFPO?)
TKS a million~~

If you want standard report you can get it through COOIS report.
If Z then through AFPO you can get the production order -- sales order link.
And yes for planned order against sales order use PLAF table.

Ever since upgrading to Yosemite on my Mac, I can only configure my time capsule via iPhone. My Mac cannot locate for backup, but CAN find as my internet router. I have followed all suggestions I can locate and have upgraded to newest version.

Time Capsule in Yosemite can be used for router/internet but Mac cannot locate for backups.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Can only connect 6 times to a server?!?

Hello,
I'm using flash lite 2.1 under Windows Mobile and I'm trying to connect to my host application (.net/C#) to write some data into a file.
Here is my code in the AS-File:
var result_lv:LoadVars = new LoadVars();
var send_lv:LoadVars= new LoadVars();
send_lv.value = value;
send_lv.action = type;
send_lv.id = id;
send_lv.file = file;
send_lv.sendAndLoad("http://127.0.0.1:8181/", result_lv, "GET");
For the first 6 times it works as expected but afterwards I get the following error from the TcpClient in the host application:
System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host.
Is there something of a connection limit in FL and the connections of LoadVars are not closed? If yes, how can I close them?
Any other ideas?
regards
ChrFin

Interesting, and yes there is a limit to the number of concurrent connections. Typically however requests are queued, but I don't know if that's the case in the FL2.1 player.
Make sure you clean up the LoadVars object after each request, and of course your receiving object and listeners.
Mark

Using 2 Airport expresses-1forStereo,1forNet-Can only work1 at time...why?

My internet express is in one room and my stereo express is in another. However when I play music using itunes and the stereo express it plays in 10sec bursts and I still can't get the internet whn it is also connected... I am very confused as to why it doesn't work...
Can anyone help?! Cheers

Sorry it's taken ages to reply...
I'm not 100% sure what you're asking. The stereo wires are plugged from the Express to the AUX ports in the stereo(... but I don't think you're asking that! Are you?!)

Multiple bill to partner function in sales order

How can a partner function be setup that it can appear more than once in a sales order ?
Need to make a sales orders with more than one "bill to partner". When I add the same partner function with another customer in the header of the sales order I get error message VPD012 : "partner function ZX can only occur 1 times in procedure ZEXP (sales document header) .
I searched OSS, and debugged for a while to try to find where that "1" is coming from.
In function SD_PCHECK_PARVW_COUNT_OK, a counter is set to "1" based on the field TPAER-PAREI (line 86). Allthough the flag "unique" is not set in partner function ZX, I get this error.
Some further in the function, there is the comment :
102 * currently uniqueness of a partner is mandatory in sales docs, so
103 * if no CAS-Doc, partner has to be unique if not AA or AW
Perhaps, in sales orders it is not at all possible to use multiple partners with the same partner function in sales orders ?
Anyone having experience with this ?
Thanks,

Hi Dries,
Even after you created your order you can maintain different bill to party.
Go to VA02 screen
Enter your order number.Enter.
Goto item details Partners tab:
Now all the details are in editable mode.enter your bill to party.Make sure your bill to party is in same sales area and company code as of sold to party.After entering the taxes will be redetermined message will come.
Enter.
Save.
Now You do the same for all other items.
Regards,
Mohan.

Creating multiple partner function for a sale order @ header level

Hi All,
I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
Partner function ZZ can only occur 1 times in procedure TA (Sales Document Header)
the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
is there any other way of over coming this issue as we are updating the standard table. Is it possible??
Thanks a lot in advance for your reply....

I believe this is a configuration setting, based upon the details of your post. Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item). For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
Edited by: DaveL on Aug 23, 2011 3:00 PM

Sales Order not transferring business partner function to GTS

We created a new Quality client and I am doing the necessary configuration to connect it with our GTS Quality client. We are running GTS 7.2.
To make it easier in the future I've decided to set up a Feeder System Group that we can add Quality clients to and not have to do a lot of configuration each time. Here are the steps I've done:
1. Created a new logical system for the new quality client
2. Created a new feeder system group
3. Assigned both the new feeder client and the quality GTS client to the feeder system group.
4. Assigned the company code and plants to the new feeder system group
5. Assigned the partner functions to the feeder system group
6. Assigned the sales document types and item categories to the feeder system group.
The new sales document is created and transferred to GTS. I then go in to display blocked documents and my new sales document shows up. When I check the log for why it is blocked I get the error "None of the partner functions to be checked are in the document". This error shows at the line item level for SPL.
When I look at the document that has been transferred to GTS in the Partner tab I see that the Partner was transferred by the field for the partner function is blank/empty. I believe this is what is causing my problem but I do not understand why that field is not transferring over.
I think I'm missing something in the configuration set up but I cannot figure out what.
Thank you for any help!
Tami

Hi Dave,
I found the logs in SLG1. I just ran it wide open without the objects and was able to find the information you are talking about. The error message it is reporting is "None of the partner functions to be checked are in the document." I looked at the embargo configuration and it's wanting to see these partner functions, AG, RE, RG, WE, EN, etc. I do have those partner functions mapped and I am using the German ones.
You said that you think there should be a warning telling me why the partner function is not transferring along with the partner. I'm not seeing that kind of warning, only the fact that the functions aren't in the document. This is more of a log telling me why the document is blocked.
Is there possibly another log other than SLG1 that would give me different information? A log showing the transfer of the doc from ECC to GTS?
Thanks.

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

How to include a new Z Partner Function in Sales order header drop down lis

Hello SAP experts,
We have come up with a new requirement to include a custom Partner Function-ZI in dropdown of SO header-Partners field.
Current scenario- Presently we are maintaining this partner function ( Say ZI- Institute ) in customer master data-Sales area tab.There could be more than one partners under this PF in master data. While entering sales Order, all partners associated are displayed in Header- partners tab, where only SP, SH, BP, PY partner functions are displayed.
Requirement- 1. Is to provide Drop down of this ZI-Institute partner function (which I did not find presently) in SO header-partners field and user should be able to provide one of partner function as available in Customer master ( as there are more than one partners that can be set in Customer master data but user need to be able to provide ONE of this ZI partner fucntion in DROPDOWN of PF tab in SO header ).
2. In addition, How can I link this new partner function in related sales reports against that particulat order and invoice?
Kindly suggest your valuable inputs as what should be the procedure to get this.
Many thanks in advance.

Hi,
Go to partner determination by VOPA
OR
IMG >> SD >> Basic function >> Set up partner functions >> set up partner function for sales document header
click on partner function and Maintain partner function ZI and back
Then select your existing partner determination procedure (Standard is TA) and click on PARTNER FUNCTIONS IN PROCEDURE and add partner function. and make it mandatory so even user forget to mention then at the time of saving system can remind user
Then double click on PARTNER DETERMINATION PROCEDURE ASSIGNMENT
Assign partner procedure to sales document
Now when you creating sales order go to header partner tab and enter you institute partner number
For sales order and invoice report
Execute this report by selecting partner function ZI in VA05N and VF05 respectively
kapil

Sending mail to all partner function in transaction

Hi Folks,
Standard action and condition sends mail to only main partner function in transaction. But transaction could have more than one partners for same partner function. Can mail be sent to all partners in transaction by using standard action configuration?
Regards,
Nikhil

Hi Nikhil,
You can control this using CRM_ACTION_BADI.
Below the use of this BADI.
In partner-dependent actions, business partners that occur in several functions, only the main partner remains.
This can be useful, for example to avoid sending the same e-mail to the same business partner if there are several action definitions for different partner functions or function types.
However, if several different actions have been defined as partner- dependent, this effect may not be required.
In this case, the CRM_ACTION_BADI standard implementation can be deactivated. In this case, all partners from the transaction are considered during action determination.
If this is also not required, a new implementation can be created.
Hope this helps.
Cheers, Satish

Regarding partner function

Hellow Guru's
My problem is....
My customer requirement is he wants to add 3 more partners like sale engineer, architect, sale representative in the inquiry level, but not in the customer master level? please do fever 2 me, it is very urgent.

Dear Chandrasekhar,
You can have partner determination procedure at sales document header level. i.e. at sales doc hdr level you can include these partner functions in the procedure.
But where will it pick the partners for these partner functions from? Obviously it will be from Customer master only. So if you want these PFs to be automatically updated in the inquiry document, you <b></b>have<b></b>to enable them as partners in CMR adn then maintain the partners in CMR for these functions.
Else, youc an define it at only sales doc header level, and then you have to manually enter these partners everytime you create a sales document, which is highly time consuming and monotonous.
So I advise you to configure partner determination at sales doc header, account group level so that values come automatically to documents.
Reward if thsi helps you

"Partner function CA can only occur 1 times in procedure TA (Sales Document

Similar Messages

Maybe you are looking for