Partner selection pop-up not appearing while saving

HI Experts,
I have maintained partner determination procedure, based on this there is pop-up box triggered for selecting the partner for service team, but the same is not appearing when i change the determination time to "When saving" but the pop-up box is triggered when the determination time is "recurring", is there any ways we can trigger this pop-up box when i serach for the service team durring entry.
Thanks & Regards
Milan

Thanks for the reply Anil.
Please find the code below.
The requirement is simple.
1)we need to go to VT02.
2)delete the stages and then save.
In step 2 ( when we hit on delete, sy-ucomm 'TSLP', the pop up should appear.
But it is not appearing.
the lines in bold is the code that is added for the pop to come.
But it is still not coming.
report YCONV no standard page heading.
include bdcrecxx.
start-of-selection.
perform open_group.
perform bdc_dynpro      using 'SAPMV56A' '0011'.
perform bdc_field       using 'BDC_OKCODE'
                              'UETS'.
perform bdc_field       using 'BDC_CURSOR'
                              'VTTK-TKNUM'.
perform bdc_field       using 'VTTK-TKNUM'
                              '7505000593'.
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'MKAL'.
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'TSLP'.
**begin insert
*PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0100'.
*PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                             'YES'.
**end insert
perform bdc_dynpro      using 'SAPMV56A' '0040'.
perform bdc_field       using 'BDC_OKCODE'
                              'SICH'.
*begin insert
perform bdc_dynpro      using 'SAPLSPO1' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              'YES'.
*end insert
PERFORM BDC_TRANSACTION USING 'VT02'.
perform close_group.

Similar Messages

  • Compamy logo does not appear while saving as PDF in Webi

    Hi,
    I have a company logo that appears perfectly fine in webi. However i am unable to see it when i export the report to PDF.
    Note all other objects, formatting etc on the report remain intact
    Thanks,
    Divya

    Check out this wiki article on adding images to reports. It gives a good overview on the different methods.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/Howtoprintimagesin+Webi
    Note: If you are running the latest release, PDF will show your image if it has been uploaded to the BO images folder. This is contrary to the wiki article.

  • Profit center field is not appearing while posting of customer invoice  and

    Hi,
    profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
    Can anybody tell what are all new gl Reporting list of transaction codes

    Hi,
    In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
    Thanks,
    padmaja

  • Why does my yahoo mail sign in seal not appear while trying to sign-in

    Why does my yahoo mail sign in seal not appear while trying to sign-in when I use firefox only but with MS Internet explorer the sign-in seal appears with yahoo.com

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache
    Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    and
    * Remove Cookies
    '''''Warning ! ! '' This will log you out of all sites you're logged in to.'''
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy.'''
    Under '''History''', select Firefox will '''Use Custom Settings'''.
    There is a button on the right side called '''Show Cookies'''.
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Windows task bar not appearing while in itunes full screen

    My Window 7 task bar does not appear while in itunes full screen after updating to itunes 10.5.  I checked that it functions correctly with all of my other programs and it used to work fine in previous versions of itunes.  It is frustrating when I am trying to check battery power, access my wi-fi hard drive, etc. I have been pressing the windows button to pull up the start menu then I can see whaat I need but this seems to be only a work around.  Is there some sort of a check box or something I may have missed in itunes? Does anyone else have this issue?

    If it worked OK in the test library give this a try:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Getting Error as Limits Not Defined while saving IT_0008

    Hi Folks..
    I am getting a message as "Limits not defined" while saving infotype basic pay our client payroll is international (it is a green colour message only) but i am unable to save the infotype entry. Request you to please advice me where to check to get resolve of this issue.
    Thanks
    sap_hr

    just a shot in the dark... due to lack of information
    i assume you use T710 for basic wage, there you should define the lower and upper limit for the payment. if these are not available for the entered payscale and level this message can occur

  • Error"This order cannot be processed"is appearing  while saving in QA32

    Hi Experts,
    When I am going for Qa32 transaction after UD code selection I did stock posting, while saving QA32 transaction one error is occuring "Order cannnot be processed".
    For material inspn type 13 is active.
    in the last financial year that is till mar-2008 it is been posted and saved successfully.
    I doubt is there any year dependent parameter has to be set.
    Thanks in advance
    Rewards points to be given for suitable solution
    Regards
    Honyal

    hi
    i think once the system try to post the material it will also generate accounting documents which is year dependent,kindly check it
    regards
    thyagarajan

  • After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5? Thank you.

    After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5?
    Thank you.

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • HT4623 person contact image does not appear while on a call,why?

    person contact image does not appear while on a call,why?

    when you say "Re-upload the image", do you mean reinsert it, or re-link it?
    Neither.
    Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
    If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

  • I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?

    I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?
    It does appear on a friend's computer using Firefox.
    Barossa Vintage Festival ... this is the missing link on my computer just under the link named ... Autumn photo collection

    No problems here with the tree links:
    View photos
    Friends gather for breakfast
    Friends take an Autumn drive
    Photos of the Barossa Festival
    Reload the web page and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • HT2486 The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

    The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

    I guess your question is, "what's wrong with the file?"
    You're going to have to figure that out yourself, as we cannot see the file.
    Importing into Address book requires either a tab-delimited or a comma-delimited file. You can export out of most spreadsheets into a csv file. However, you need to make sure you clean up the file first.  If you have a field that has commas in the field, they will create new fields at the comma. So, some lines will have more fields than the others, causing issues like the error you saw.

  • Variable selections not appearing while executing query

    hi,
    am using 3 variables in my query all 3 are ready for input, but still when am testing it in another username, the system does'nt give the selection options and the query is executed automatically.
    1 of the variables use company as characteristic. We have 1 authorization built on company in RSECADMIN where it is restricted for 1 company and this authorization object is assigned to this user.
    kindly advise.

    Hello,
    Actually this can be typical when in your queries, none of the selection criteria is obligatory.
    you should put at least one of them obligatory, and it should work fine this way, the selection screen will correctly appear.
    Regards,
    Mickael

  • SRM Shopping cart pop up not appearing in EP 6 portal

    Hello
    I have set up the SRM business package in the EP6 SP13 portal. If I create a Shopping Cart via the ITS then leave the transaction (say by clicking on another transaction a popup would come up and warn me that I have not saved the shopping cart and would lose my work.
    However via the portal, this message doesn't appear.
    Does anyone have any ideas how to get this pop up to appear on the portal iview?
    Thanks
    Rebecca

    Hi!
    As Detlev suggested the only "standard" solution is to use Portal's EPCF dirty flag.
    In SRM transactions when you are in change (or similar) mode in the HTML source code of the SRM transaction there is a flag (JavaScript variable) that refers to this state.
    You have to check this Mode flag, and set the Portal's EPCF flag accordingly.
    There are many ways you can achive this little trick.
    E.g.
    -In every SRM transaction the WPINTEGRATION.JS file is included, so you can put sour code here.
    -Or you implement SRM transactions via a proxy html page (stroing it e.g. at the Portal KM), which is called via an URL iview.
    Once you made this Portal will not let you close an SRM transaction when it is in change/create mode without a warning.
    Hope this little overview gives you enough to start with.
    BR.
    Richard

  • Crystal Reports Alert message pop-up not appearing in InfoView/BO Mobile?

    Hi,
    I am testing conditional alerts of a crystal report in BOBJ Mobile application. The application is supposed to show a pop-up for the alerts whenever the condition set inside the report document is met, with the creation of any instance in InfoView (the document is scheduled.)
    The application is not showing up any alert pop-up.
    Moreover, InfoView itself does not seem to show any pop-up alert message (the way Crystal Reports client is showing up in design env) for that particular instance of the report. The alert details are, though, only displayed in the 'instance details' option in InfoView. No pop-up on opening of that particular instance, and also on refreshing that report itself. May be InfoView is designed to manage alerts that way..
    How the way should I create my alerts in crystal report as to make them appear as pop-ups in InfoView on instance opening/report refresh. And then, in turn, in my BOBJ Mobile application.
    Thanks in advance if anyone can tell some way out for the requirement. This is very imp to us.
    Nirmit

    Hi Don,
    The reason for me to post this thread in Crystal Reports was to get information on how the way the alerts needs to be configured in Crystal Reports as to make a pop-up for them to appear while viewing the instance of the report from InfoView or refreshing the report itself in InfoView.

Maybe you are looking for