Passing by value is good or with out by value is good.

Hi,
<numbers>
<number id= "a">one</number>
<number id= "b">two</number>
<number id="c">ten</number>
<number id= "d">six</number>
</numbers>'
Above xml is in abc table, col xmlcol (type is blob)
select XMLCAST(XMLQuery ('for $num in /numbers/number
where $num/@id = 'a'
order by $num/@id
return $num/@id
passing by value xmltype(xmlcol , nls_charset_id( 'AL32UTF8' ))
AS VARCHAR2(100))
from abc;
Q1) passing by value is good or with out by value ?
i am using it in stored proc.
oracel 11g express
yours sincerely

Q1) passing by value is good or with out by value ?http://docs.oracle.com/cd/E11882_01/appdev.112/e23094/xdb_xquery.htm#CBAHGAJI
Oracle XML DB supports only passing BY VALUE, not passing BY REFERENCE, so the clause BY VALUE is implicit and can be omitted.

Similar Messages

Help with passing integer value in A.S.S

I get an NSinternal script error while trying to pass this value can anyone help?
Also I wonder if it is possible to pass the value to a matrix
on clicked theObject
tell button "checkbox" of window 1
if integer value = 1 then
set button "checkbox2" of window 1 to integer value = 1
else
set integer value to 0
end if
end tell
end clicked
I also tried:
if state of button "checkbox" of window1 is 1 then
set the state of button "checkbox2" of window1 to 1
end if
Message was edited by: Doug Bassett

I've been following this thread and trying to figure out how to make this work. I was getting inconsistent results or errors with most of the code that has been posted. But I finally got it working... at least on a Leopard machine (not sure if this could have changed between Tiger and Leopard so your mileage may vary).
What I found was that a checkbox button that's located directly in a window seems to have a state that's equal to 0 when it's unchecked and 1 when it's checked. But a checkbox cell that's contained within a matrix seems to have a state that's set to either _off state_ or _on state_. Trying to set a cell's state to 0 or 1 simply wasn't working right for me. So I get the state of the "selectall" checkbox button (which is a 0/1) and transform it to either "off state" or "on state" before setting the states of the checkbox cells in the matrix.
Here's my code:
on clicked theObject
set n to name of theObject
if n = "selectall" then
set s to state of theObject
log "state: " & s
if s = 0 then
set newState to off state
else
set newState to on state
end if
repeat with i from 1 to count of cells of matrix "directories" of window "main"
tell cell i of matrix "directories" of window "main"
set state to newState
end tell
end repeat
return
end if
if n = "logStatesBtn" then
logStates()
return
end if
end clicked
on logStates()
log "Logging states:"
set s to state of button "selectall" of window "main"
log "selectall checkbox: " & s
repeat with i from 1 to count of cells of matrix "directories" of window "main"
tell cell i of matrix "directories" of window "main"
set s to state
end tell
log "Cell " & i & ": " & s
end repeat
end logStates
Note the "logStates" handler is just something I connected up to a "logStatesBtn" button in my window that lets me spit out the states of all the checkboxes into the console log. This is how I actually discovered that the cells were set to "off state" or "on state".
Steve

Price change for material with Goods Receipt with out Order reference?

hi all,
Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
ex:
                                 Quantity             Price             Value
Stock balanace        100To                 2.00/To         200
Newly produced      100To                 2.20/To         220
after the GRN for newly produced is done. The price also need to change as below.
Total                         200To                 2.10/To         420
This is easy if we receive goods with PO price, as moving average price will updae in the master record.
But here no reference. So only quantity updated with existing price.
So how to achieve the change of price ? Please help.
Thanks,
Aravind

Hi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind

Problem with prepared statement where cluase when passing string value.Help

I am updating a table using the following code. I am using string parameter in where clause. if I use Long parameter in where clause with ps.setLong , this code is working. Is there any special way to pass string value? Am I doing anything wrong?
===================
updateMPSQL.append("UPDATE MP_Table SET ");
     updateMPSQL.append("MPRqmt = ?,End_Dt = ? ");
          updateMPSQL.append("where POS = ? ");
          System.out.println(updateMPSQL.toString());
          con     = getConnection(false) ;
          ps      = con.prepareStatement(updateMPSQL.toString());
          ps.setLong(1,MPB.getMPRqmt());
          ps.setDate(2,MPB.getEnd_Dt());
          ps.setString(3,MPB.getPos());
result = ps.execute();
          System.out.println("Result : " + result);
==========
Please help me.
Thanks in advance.
Regards,
Sekhar

doesn't Pos look like a number rather than a string variable?
if I use Long
parameter in where clause with ps.setLong , this code
is working.
updateMPSQL.append("where POS = ? ");
ps.setString(3,MPB.getPos());

Acrobat pro Extended | Passing variable value with Querystring

Hi,
We are facing issue with opening a web link with passing a variable value as query string parameter. We have added a form button on the pdf page, on click of it we have opened a web page and we want to pass a variable value in the query string. We can not give the hard code value in querystring, as the value keeps on changing.
Please refer to the images below.
here the data will be my variable name, which contains some value. When i execute it, it passes data as a string, i want to pass its value in the query string parameter. How i can do this?
I had found one more way, is to call a function on the form button click, and in that pass the query string parameter as a variable, it works. But the problem in this case i am faceing is, in the app.launchURL command i have to provide a http path, means something like http://www.google.com, then only it works. I have that page on my local (no server), so i want to add the path as onlu page.html
//Reference code, this fun will be called on a button click
function LaunchPage()
app.launchURL("http://www.aptara.com/page.html?value="+data+""); //this works
app.launchURL("page.html?value="+data+""); //this dosent works
Please do let me know, how i should proceed. To repeat, i want to invoke a page, which is on my local system with a querystring, in which i sud pass a variable value.
Thanks,
Ajit danve
Sr. Developer
Aptara, Pune.

re: George Johnson
Thank you for the response. This process that we are looking to do is necessary. We have 400+ OLD PDF forms that currently are printed by our print shop and then manually filled out and scanned into our system. The current process requires a clinician to log into our scanning system, identify a patient chart, and then identify the type of report they are scanning in. This process is time consuming with possibility of errors (wrong chart selected, wrong form, etc.). Plus, we have to stock up to 400 forms at each location.
We don’t have the funds to convert 400+ complex forms into electronic submissions where the form fields are discrete and file accordingly. So, what we have come up with to save costs of a new system and reduce potential errors is to add a barcode to each existing form.
Basically, each form will get a barcode and a javascript function in the onload event to process and parse passed in link parameters.
So when a clinician clicks on a form link in our EMR system the form will load passing in the patient acct. number and form name into the link parameters (all on our local intranet) so it will get embedded into the barcode on the form. They will then print the form fill out the data (or have the patient fill it out) and then drop it in the scanner. Our scanning system will automatically see the barcode and file the form under the correct patient and form folder based on the barcode info. (A scanned image of the form will save to the patient profile).
Ultimately we would like to convert all of these forms to electronic signature/submission but we do not have the funds or the time to do this.

I am facing a problem in passing multiple values as out parameters from fo

Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.

user9041629 wrote:
Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.Probably not a bad thing that this isn't working for you.
This is a horrible way to return the contents of a table.
Are you doing this for educational purpose, or ... what is your goal here? If you just want to return a result set to a client you'd want to look in to using a REF CURSOR and not a bunch of arrays combined with horribly procedural (slow) code.

To create a Material using BAPI with out passing the material number

Hello Experts,
I am using BAPI_MATERIAL_SAVEDATA to create a material of some Ztype. I am successfully creating a material if I am passing Material Number as input. I want the material number to generated internally.
When I am doing material creation with same input data with out material number using BDC, it is working fine. It is generating the material number.
But, not with the BAPI.
Do, I need to specify this some where in the BAPI to generate the Material number internally? Please let me know.
Please help me in this regard.
Thanks & Regards,
Naresh.

Hi,
Read the BAPI documentation regarding Internal Number range for materials.
When you create material master data, the following fields must always
contain a value in the structure:
o   MATERIAL
    Only external number assignment is supported for the material number
    (MATERIAL). If you want the material number to be assigned
    internally, the method BAPI_MATERIAL_GETINTNUMBER must first be
    called. This method determines an internal number for the material
    to be created. You must enter this internal number in field
    HEADDATA-MATERIAL.
Regards
Vinod

PO with out Value

Hi Experts,
Can we make a PO with out value for a material?
Scenario:
Client wants to make a PO without Value for a matrial, next wants to process or some value addition and wants sell this as a finished goods.
Can I create this material under the material type non valuated material and make a PO?
Experts pls suggest ways to achieve this in SAP
Thanks
Naveen

Hi Anamika,
If we create a material of material type "UNBW" then automatically by SAP standard it will not have a accounting view nor it will have a value updation at plant level, so it's not required to ensure the point.
we can check it with t.code OMS2
The material can simply be created with material tye "UNBW"
Regards,
Sushanta

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi ‏51 KB
Binning example.png ‏12 KB

Free of goods returns with out main item

Hi.. All
Free goods returns with out Main item
created sale order with Shoes 5 Pair qnty
and free of goods are pair Soxs are 3
Now one pair Damaged now i want to send returns only For Free of goods Here no main item

""""No seller is creating billing with free of goods with main items
now i am going to create Return order main item is coming as well as Free of goods items also coming to RO
Now i want to return only free of goods only one pair
i cant delete main item Right""""
Have you tested this? what was the problem in deleting the item??
Have you activated the complete reference in your VTAA controls??
Phanikumar

Table control values are not able to read with out a user action.

Hi All,
I am working with a module pool programing and I am calling 3 sub screens into my main normal screen.
In one of the sub screen, I have created a table control and getting the initial values from database and displaying.
Now I try to change the couple of fields in my table control and with out user action (not pressing Enter after changing the values in table control).
I try to save the edited/changed values in table control into the database. But I am not able to do so, since the change values are not able to pick.
My requirement is end user will not do any action(press the enter key ) and he directly presses the save button which is defined in the main normal screen.
Kindly suggest some solution.
Thanks
Geetha

Hi Geetha,
in SAP Default While pressing save button the modified value will pick up because
Save button will perform enter function also.
Regards,
Thangam.P

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have an iphone with the app GOOD to read e-mails. I sync to my other PC having first updated itunes. During sync it reported that it had removed GOOD, with out asking. Any ideas?

I have an iphone with the app GOOD to read e-mails. I sync to my other PC having first updated itunes. During sync it reported that it had removed GOOD, with out asking. Any ideas?

With the iPhone, you can sync all iTunes content with only one computer. Trying to sync iTunes content with a second computer will result in iTunes erasing the content from the first computer.

HT201209 how do I add higher value "money" to my itunes account with out buying an iTunes gift card instead of buying 1 song at a time?

how do I add higher value "money" to my itunes account with out buying an iTunes gift card instead of buying 1 song at a time?

I know you can link your credit card to your Ipad, go to the app strore and go to the bottom and tap apple Id and sighn in then go to payment information and you can set up a credit card. Hope this helps

Passing by value is good or with out by value is good.

Similar Messages

Maybe you are looking for