Passing error wire - connected to an undirected tunnel

How can I pass error cluster wire between stacked sequences ??
For example in the state machine - the error cluster wires should pass data from previous stacked sequence CASE 0 to CASE 1.
How can I do that ?
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

I have searched many times on this forum.
How can one do the following in terms of state machine :
Have a FOR loop that has N cases
For each iteration "I" the cases 1-N repeat.
One way is to convert those 1-N cases to another state machine and reuse it under the main state machine (for example the one I showed).
How else could one do it., Please explain this. As this is most common kind of coding I will have to face through out my development and I dont want to complicate it by having nested state machines.
Even a simple sketch will do it.
Thank you.
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

Similar Messages

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

JCONTROL - dies with Error while connecting to DB

Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
     at java.lang.reflect.Method.invoke(Method.java:391)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
     ... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO:    Try to find file table sapcpeft (default:sapcpeft)
INFO:    Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO:    not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PR

ISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at java.sql.DriverManager.getConnection(DriverManager.java:559)
        at java.sql.DriverManager.getConnection(DriverManager.java:189)
        at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

Can't we pass java.sql.Connection as parameter toDatum() method

I am in mid of java 1.3 to 1.4 migration, now I am getting the below error.can't we pass java.sql.Connection as a param to toDatum(), but I did the same before for another module and it worked fine, now I am getting the error.
any changes need to be done?
[b]toDatum(oracle.jdbc.driver.OracleConnection,java.lang.String) in oracle.jpub.runtime.MutableArray cannot be applied to (java.sql.Connection,java.lang.String)
return array.toDatum(c, SQL_NAME);
^
1 error
I changed to use
import oracle.sql.ORAData;
import oracle.sql.ORADataFactory;
instead of
import oracle.sql.CustomDatum;
import oracle.sql.CustomDatumFactory;

In general, it's bad practice to be that "open" with regards to parameters to methods, especially when using remote invocations. However, if you really, really, really, really need to - and I doubt you do - you can use Serializable for the type of parameter. But that's still inelegant and, well, raises all sorts of issues, starting with your design...

CS6 error - Please connect to the Internet and retry

Running CS6 Flash, Photoshop, Illustrator for the past couple years on an older desktop. Running Windows XP and have had no known issues using this software until recently when trying to open. Now when opening any of these programs I get a pop up asking to "sign in with your Adobe ID to use your trial of Adobe Flash ProCS6." (same with the other programs when opened).
I enter the login info and get an error that says "Please connect to the Internet and retry".
I am connected. Hard wire connection. I am using a home computer. Clock is set to correct time.
Because I am running XP I need to keep using CS6 on this machine and cannot yet upgrade to a newer version to reinstall.
Thanks in advance for any support!

Are your programs serial number versions from before the Cloud, or did you subscribe to the Cloud and install the CS6 versions since you have XP?
And/Or... have you ever installed any part of the Cloud?

Sync encountered an error while connecting: Server incorrectly configured

I have started getting the following message for some reason. No one has been able to answer it on the user forums. Can you help please? "Sync encountered an error while connecting: Server incorrectly configured. Please try again"

same thing, started today. i have pasted my sync-log here. my username has been changed from my real username to "username". i noticed the URL in the log. nslookup returns Non-authoritative answer:
Name: sync-rr.phx.services.mozilla.com
Addresses: 63.245.217.208
63.245.217.207
Aliases: phx-sync038.services.mozilla.com and i am able to surf to the page. it asks me for a username and password, in which i put my sync username & password. it seems to take the login/pass just fine but no page is served - it just sits on loading forever.
1309215660360 Service.Main INFO Loading Weave 1.8.0
1309215660371 Engine.Bookmarks DEBUG Engine initialized
1309215660372 Engine.Forms DEBUG Engine initialized
1309215660374 Engine.History DEBUG Engine initialized
1309215660375 Engine.Passwords DEBUG Engine initialized
1309215660376 Engine.Prefs DEBUG Engine initialized
1309215660377 Engine.Tabs DEBUG Engine initialized
1309215660378 Engine.Tabs DEBUG Resetting tabs last sync time
1309215660379 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
1309215660382 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync038.services.mozilla.com/1.1/username/
1309215660384 Service.Main INFO Starting sync at 2011-06-27 18:01:00
1309215660384 Service.Main DEBUG In sync: should login.
1309215660386 Service.Main INFO Logging in user username
1309215661024 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215661025 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215661033 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215661034 Service.Main DEBUG Not syncing: login returned false.
1309215661035 Service.Main DEBUG Clearing sync triggers.
1309215664700 Service.Main INFO Logging in user username
1309215664796 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215664797 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215664801 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215664802 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 89 sec.
1309215699971 Service.Main DEBUG Clearing sync triggers.
1309215704491 Service.Main INFO Starting sync at 2011-06-27 18:01:44
1309215704492 Service.Main DEBUG In sync: should login.
1309215704494 Service.Main INFO Logging in user username
1309215704839 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215704840 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215704844 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215704845 Service.Main DEBUG Not syncing: login returned false.
1309215704846 Service.Main DEBUG Clearing sync triggers.

Error "Wire: is a member of a cycle

I am doing decoupling control of MIMO system in LabVIEW Control Design and Simulation module. Simulating the controller and the plant transfer functions, gives the error "Wire: is a member of a cycle".I understand this is coz of the Three transfer functions in the trnsfer matrix having equal number of poles & zeroes showing Direct feed through behavior. As I can make no changes in the plant or controller models, can anyone suggest a possible solution for this?plzz
Solved!
Go to Solution.

krishnapriyapg wrote:
Sir , the output from 7 is given to the negative node of the summer near level SP(to 10) . In the bd, it looks like both are given to the same node is just a mistake happened while cleaning the wires in the diagram . However the connections were correct. I have attached the screen shot again.
oops never mind too early in the morning
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How to fix read error (104) Connection reset by peer

I cannot get to certain web sites (eg The Nation newspaper, Political Wire), because I keep getting this error
read error
(104) connection reset by peer
Please help

Are you using network that requires a network administratior?
See if any of the boxes are selected in System Preferences > Network - Advanced - Proxies

Error Wire always in the background if crossing other wire

If you need to wire cross other wires it would be nice just for the optic to have the error wire always in the background of the cross. Now the wire which is connected first is in the background and all other overlay it.

Duplicate of http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Always-place-Error-Wires-underneath-other-wires/idi-p/2214142

"this wire connects to a polymorphic terminal that cannot accept this datatype"

Hi everybody,
Following is my problem with Type cast node
While connecting a cluster (consist of an array of integers + some other basic datatypes) to type terminal of Type Cast node, It shows the wiring error ("This wire connects to a polymorphic terminal that cannot accept this datatype").
Basicaly i want to read a 'C' structure that consist of an array of int from a TCP/IP socket read node and than type cast it to a cluster in labview., but i am facing the above problem while trying to typecast it.
Thanks in advance on pondering to my question.
regards
Hamas

Hi,
I'm pretty sure that your C array is of constant size. LabVIEW arrays are always of variable size. This is the reason the type casting here is not possible. However that doesn't mean you cannot do the typecasting. You just should use a cluster of multiple elements of the same type instead of an array of that type.
This particular issue was just quite extensively discussed at LAVA forum so I better not to replicate all the details but rather point you to the source of information.
Tomi Maila
Tomi Maila

A *** ERROR = RFC ====== connection closed (no data)

I trace data On Instance DEV_W0 the had Error as below
A *** ERROR => RFC ======> connection closed (no data)
Please Kindly verify the cuase and recommend in this issue .
Edited by: SoeyTH on Dec 6, 2010 3:38 PM

You need to proivde more logs to find what caused.
Is you SAP up?

I have lost the ability to upload files to a website. I have to transfer files from my computer to a web site and I get an error message "connection was reset" and the file will not upload. I try to transfer pictures and I get the same message.

I have to upload a scanned receipt to a website and I get the error message "connection was reset". I have uploaded these receipt for two years and last week I have had to use another browser to complete this operation. I connect to the website and do the report I must do, but I can no longer upload to this site.

Are you using any additional software for the uploading?
Try using Firefox in [[safe mode]] when you upload. There is no need to make changes when you see the option. Disable all plugins whilst in safe mode. Then try the uploads.
You mention [/questions/921993 elsethread] that it is a work site. Have you contacted your IT department. One possibility is that the site is not recognising Firefox 10.
(One temporary workaround and troubleshhooting test would be to install Firefox3.6.27 [http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released portable] as an additional browser and try that.)

Android MS RDP - RPC Error: Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator. (2147965402).

I love iTap Mobile. Paid for the app. Sorry to see them discontinue it, but now I know why. Microsoft bought them out! But even though free, I am getting an error: RPC Error: Your connection was denied because of a Resource Access
Policy (TS_RAP). Please contact your server administrator. (2147965402). I worked with iTap to fix this so I guess they sold Microsoft their older buggy code... Microsoft, please fix!
PS: This is the Android version. Mac and iOS are both okay.
EDIT: After an update a few months ago, iOS is no longer working. Not sure if the problem is related to the Android MSRDP issue.
UPDATE - Relevant posts (need Android RDP software engineer to fix):
Event Viewer Log when using Android client:
The user
"DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This is after clicking on any
of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's what it should look like (connected using a Windows PC going
through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x", met connection
authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x", met resource
authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x", connected
to resource "rdsfarm.domain.com".
Stephan,
Do you have any way to contact the software engineer who worked on the Android version of the RDP client? Please
have them read this thread. They need to fix the hard coded "localhost" resource to be a variable (namely whatever the user put in for the server).
This is why the MS RDP app is failing in situations where the FQDN for the RD Gateway and Connection Broker uses
the same host name.
Again, this is not a configuration problem on our end as it works as intended with the native Windows RDP client
as well as the Mac and iOS version of the mobile RDP client (all based on iTap Mobile's RDP app).
This is a problem specific to the Android RDP app.
PS: No matter how hard I try, the WYSIWYG editor is not very WYSIWYG at all, and so everything here looks messed up even though it looked right when I posted it (it is deleting new blank lines I'm inserting to make it spaced out and easier to read). See
below to read the post in context.

Thanks for the bumps, everyone. I haven't check this thread in a while because I basically gave up on Microsoft's ability to respond. Unlike paid apps, there's no number to call or ticket to open when an app like this malfunctions.
Just to give you an update, iOS users started having issues connecting a few months ago. I don't remember what version started this. I'm not sure if it's the same problem.
Also, the newest version now gives a slightly different error message: RpcOverHttpEndpointException: 2, Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator.
For Android users, I am starting to recommend Xtralogic Remote Desktop Client. It's a paid app, but it works great. I don't know of any alternative for iOS.
MSRDP for Mac OSX (was also an iTap application) continues to work throughout the many updates.
We need a software engineer from MS to read my first post. All the information that will point to a fix is there. I strongly believe someone hardcoded the string "localhost" instead of using a variable to point to the FQDN of the rdsfarm
name.
Here's that info again (copied/pasted). It doesn't take an engineer to understand the issue. If you know how to decipher Event Logs, you can see where the problem is.
Event
Viewer Log when using Android client:
The
user "DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This
is after clicking on any of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's
what it should look like (connected using a Windows PC going through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met resource authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
connected to resource "rdsfarm.domain.com".

Outlook 2013 error: The connection to Microsoft Exchange is unavailable

Environment: Windows 7 Enterprise
Setup: Fresh install of Office 2013
Issue: When I launch Outlook I get the error:
The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Steps to resolve:
I made sure my server name and mail address were correct but this did not have an impact.
I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable. All of the other threads dealing with this issue have been no help. I can sign into my account
at login.microsoftonline.net so i know the account is valid. I also receive email to my iPhone with the account and server. Any advice would be wonderful.
Now when I start up the application it tells me the same error and brings up something to alter the server and connection address.

Hi,
Have you tried to recreate a new mail profile and then test the issue?
To do this, please exit Outlook, and then go to
Control Panel >Mail... > Add…
Details about create a new mail profile, see:
http://support.microsoft.com/kb/829918/en-us
Also, you can try with this KB:
http://support.microsoft.com/kb/2264398
This issue occurs when the
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
AppData string value is missing from this registry key.
To resolve this issue, import the
User Shell Folders registry key from a working Windows User Profile.
Hope this helps.
Best Regards
Steve Fan
TechNet Community Support

Passing error wire - connected to an undirected tunnel

Similar Messages

Maybe you are looking for