Passing rendering format and report parameters in the URL to call a report - SSRS 2012

Hi,
I've a SSRS 2012 with the integer and multivalue Creation_Years parameter that I need to call directly to export data in the Excel format.
I've tried to use this URL:
http://reportserv/Reports/Pages/Report.aspx?ItemPath=%2fInsurance%2fInstallations_Excel&rs:Format=excel&Creation_Years=2014 but the parameter is required in an interactive manner.
I've tried to set the hidden property for the parameter, I've tried to invert the position of the "rs:Format=excel" string with the "Creation_Years=2014", but the error message doesn't change. Also if I specify the 2015 year, the parameter
isn't overwritten with the 2015 value.
Any helps to me, please? Thanks

Ok, thanks, I note that you have added "rs:Command=Render": looking to the official documentation this string seems optional.
Your url functions but the parameter cannot be a multivalue one. Do you confirm this?
Thanks
If you want to sent value for multi valued parameter through URL you need to repeat it
ie like this
http://reportserv/ReportServer/Pages/ReportViewer.aspx?%2fInsurance2fInstallations_Excel&rs:Command=Render&rs:Format=excel&Creation_Years=2014&Creation_Years=2015&Creation_Years=2016...
also see
https://msdn.microsoft.com/en-us/library/ms155391.aspx
If parameter value itself has characetrs like & in it you need to escape them first using javascript
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

Composing the URL to call a report to render in the Excel format - SSRS 2012

Hi,
I've a report that I need to call by an URL. I've composed this link, using the rs:Format=EXCEL command, but I've an error because the max number of rows is 65.536 for the current version of Excel and the extracted data are more of 150.000 rows. On the report
server is installed Excel 2013 and so this error it seems strange: the limit of 65.536 rows refers to an older Excel version than Excel 2010.
My idea is to pass in the URL string a client command, but rc:Format=EXCEL doesn't function.
Any suggests to me, please?
Thanks

Hi pscorca,
Per my understanding that when you export the large data report to excel by adding the commend "rs:Format=EXCEL" in the URL, you got some error, right?
As you mentioned that you are using the new version of excel, so the issue can be caused by the reporting service have some limitation rendering the large data report.
Please design the report to add page break and parameters which will also avoid some limitation of the excel:
When you add page breaks in the report. Each page break will defines a new sheet in Excel. Each sheet can handle a maximum of at least 65000 rows. Consider these limits when you set the page breaks in a report.
For exporting to Excel, do not merge cells in a Tablix data region. In free form reports, align report items vertically. Merged cells and unaligned report items interfere with Excel functionality in the exported report.
You have mentioned that pass "rs:Format=EXCEL" in the URL string a client command, but doesn't work, please check to make sure you add the commend after the Report URL of the report Server but not report manager.
Pass a Report Parameter Within a URL
More Details information for your reference:
Troubleshooting Reports: Report Performance
If your problem still exists, I would like you post us the error message you got to help us better analysis about the issue.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.

How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.Help me, anyone? Thanks in advance.

Just to add.....I created a folder on my PC to store all videos taken from my iPhone and my wife's iPhone.
I just cannot sync those videos taken using my wife's iPhone to my iPhone.

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use..

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use.

I would just leave them in Word...GR reads many formats very easily.
If our goal is to work on/edit the files it may be useful to look into something like Pages if you have a Mac, and the Pages for iOS devices so you could use the same word processor on both machines.
But if you convert the Word to PDF and then use GR you can still edit the files...GR will edit and annotated PDF files rather easily.

How to hide parameters in the URL ?

Hi,
Iam using Reports 6i on web. Now Iam calling report from a report (Drill done report) using SRW.SET_HYPERLINK.
Iam passing lot of parameters to this detail report.
When I call the main report the URL looks like:
http://devreports.wwt.com/dev60cgi/runrep.sh/15369?
But when I click on the link in this main report for details, the detail report URL looks like this.
http://devreports.wwt.com/dev60cgi/runrep.sh/15369?emp_detail&p_emp=45&p_job=clerk&p_format=PDF
Iam hiding userid/passwd@database in the cgicmd.dat file
I want to hide all the other parameters also like
the Main report URL :
http://devreports.wwt.com/dev60cgi/runrep.sh/15369?
How to do this ?
Please help me if anybody has the solution.
Thanks alot.

Hi Ram,
Not sure if this is possible.
However, one workaround might be the following:
1. Write a javascript that submits the URL using, say a POST method, and does not show the parameters in the URL. You will have to write this javascript code in the "Before Report" Report Escape. For a generic example on how to use javascript in a report, see Metalink Note 125652.1. This note shows javascript to disable the right-click of the mouse on the report output.
2. Use the Hyperlink peroperty of the report to call this javascript function, eg,
javascript:myfunction('http://machine:port/reports/rwservlet?report=...+server=...+empno=&empno')
I am not a javascript expert, so I cannot give you an example of the function, but I hope someone in your team can find out.
Navneet.

Discoverer Report run by the Pastoral Board called: Registered Lessees

Dear Friends,
There is a report run by the Pastoral Board called: Registered Lessees
DOL PN PLBU DATA ENTRY
DRDL Pastoral Station Information
Registered Lessees
This report lists the information containted within the Pastoral stations module.
The pastoral stations module is linked to our Customer creation module.
We are having an issue, whenever we create a new customer or amend one, the information is dropping of the Pastoral Stations module
Your help would be appreciated.
Thanks a lot in advance
Siva charan

Hi
The problem i sthat the function in the custom folder evaluated by the Oracle fisrt and after that are evaluated the functions which sets the global variables from the parameters.
So if you open the workbook nothing selected but the global variables has set and the next time you got the result with the previos parameters.
If you change the parameters it wouldn't change the result set only if you refresh it again without changing the parameters.
This is not a good solution for using parameters in custom folders. As I know there is no good solution for this problem yet.
Ott Karesz
http://www.trendo-kft.hu

How to hide the parameters in the url

Hi,
Can anyone help me to hide the parameters being passed in the url. For example, when a link is clicked i want to pass few parameters to it, but i dont want to display those parameters in the url. Can anyone help me figure out how can i achieve this?
Thanks
ri

In your CO's processFormRequest, do pageContext.putTransactionValue(name, value). You can retrieve the value using pageContext.getTransactionValue(name). Please use your own judgement to use Transaction or Session as the place holder as per your requirement. In most cases, transaction would do but if you want the values to be retained across transactions, use Session. Also, make sure to clear those values when you are done with the values so that this does not get retained across session/transaction.
Incase, you want the values only for the next submit and not for the transaction, you can use pageContext.putParamater() and pageContext.getParameter() which has a very short life cycle.
Regards,
Guru.

How to specify more than 6 parameters in the URL or in the HTTP header?

After applying SAP note 1105368 ,it will be availible to specify more than 6 parameters in the URL header.
But i haven't figured out how to specify it yet.even though i went through the note carefully, but it really hard to understand.
Is there someone who experienced to specify more than 6 parameters ?
Inccording to the note,the parameter fileds look like should be
specified like below.
parameter1: <SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="SAP_URL_EXTENSION">urlext</SAP:Record>
parameter2:<SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="urlext01">Order=4711</SAP:Record>
parameter3:<SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="urlext02">Object=1807</SAP:Record>
but something about the format doesn't look right....

Hi,
I know we can set headers by using some tools. Neoload tool is used to set values into header.
If Servlet after receiving the request you can set header values and send back with response.
Check this
http://www.unix.com.ua/orelly/java-ent/servlet/ch05_06.htm
Thanks,
RamuV

Reference additional parameters via the URL

Is it possible to reference additional parameters via the URL?
I would like to be able to reference the value of CUSTOM_PARAM in the following simple example
f?p=4000:1500:3712511906556636:::RP::&CUSTOM_PARAM=12345

Hello Craig,
I dont know if you already solved the problem but as you probably noticed I had the same, if you are running on a remote host with minimum privileges this is simply not possible but if you have your personal server and database this is the solution to go(thanks to your idea).
create or replace procedure APEX_040000.f2(
P in varchar2,
P_SEP in varchar2 default null,
P_TRACE in varchar2 default null,
C in varchar2 default null,
PG_MIN_ROW in varchar2 default null,
PG_MAX_ROWS in varchar2 default null,
PG_ROWS_FETCHED in varchar2 default null,
FSP_REGION_ID in varchar2 default null,
SUCCESS_MSG in varchar2 default null,
NOTIFICATION_MSG in varchar2 default null,
CS in varchar2 default null,
S in varchar2 default null,
TZ in varchar2 default null,
P_LANG in varchar2 default null,
P_TERRITORY in varchar2 default null,
code in varchar2 default null, <-- Custom variable
error_reason in varchar2 default null, <-- Custom variable
error in varchar2 default null <-- Custom variable
+) is+
begin
--write your code here+
APEX_040000.f(P => P,P_SEP => P_SEP, P_TRACE => P_TRACE,C => C, PG_MIN_ROW => PG_MIN_ROW, PG_MAX_ROWS => PG_MAX_ROWS, PG_ROWS_FETCHED => PG_ROWS_FETCHED, FSP_REGION_ID => FSP_REGION_ID, SUCCESS_MSG => SUCCESS_MSG, NOTIFICATION_MSG => NOTIFICATION_MSG, CS => CS, S => S,TZ => TZ,P_LANG => P_LANG,P_TERRITORY => P_TERRITORY);
end f2;
Then it is important to indeed grant public access to it with:
grant execute on APEX_040000.f2 to public;
Now here comes to part that actually does it and where the right privileges are needed.
create or replace public synonym f for APEX_040000.f2;
Overloading the F procedure didnt work for some reason, probably because F is a wrapped procedure.
But this worked perfect !!!

Get the parameters from the URL

Hi all,
In my applet I need to know the parameters that are in the URL. But I don't know how to do this.
I started with this:
String URL=getDocumentBase().toString();So URL has the full url, like: http://127.0.0.1./test.html?Testparam1=hello
What I could think of is to use :
int i = URL.getindexof("?Testparam1");
String value =URL.substring(i);But that is not very handy when using more parameters.
Is there an other way to get the parameters from the URL?

You could use a regex or a StringTokenizer, but I'll bet there's a library somewhere that'll do it for you. Probably something in Apache Jakarta Commons. As far as I know there's nothing in the standard library that'll fully parse query strings for you, although you can use java.net.URLDecoder to decode the url-encoding (the %xx encoding).
If you don't want to find a specialized library, then probably a regular expression is the easiest approach.

Can u add mobey to ur iTunes account directly from ur paypal account? And so what's the URL?, Can u add mobey to ur iTunes account directly from ur paypal account? And so what's the URL?

Can u add mobey to ur iTunes account directly from ur paypal account? And so what's the URL?, Can u add mobey to ur iTunes account directly from ur paypal account? And so what's the URL?

Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
No. Only apps purchased from the App Store can be re downloaded for free including updates.

Launching a page by passing parameters in the URL

My app has a page sentry function that sets the APP_USER using the Apache mod_ntlm module to the Windows domain user. I check security for each page in a custom table that I maintain.
If I try to launch a page by passing parameters in the f?p= URL like
f?p=100:1:::::P1_ID:10
since I dont have a session yet, the page sentry generates a session for me and redirects to the page (100:1), but I lose my parameters (P1_ID)
How can I preserve the entire URL in this case?
Thanks

I modified the page sentry function like you suggested.
Launched f?p=102:51:::::P1_ID:1234
This got redirected to
f?p=102:51:2458638498649564102
My debug table has 8261051781657854662
When I inspected session state for 2458638498649564102 using Workspace XXX>Manage Workspace>Session State Management>Recent Sessions>Session State
it had no entry for FSP_AFTER_LOGIN_URL. All it had was
-      -      -      1:15:0:0
-      -      -      1:15:0:0
-      -      -      1:15:0:0
-      -      -      1:15:0:0
There is no entry for 8261051781657854662
Thanks for your continued help. Appreciate it.

Passing parameters to the url which navigates to oracle applications

Hi All,
My requirement is i need to display a link in the email message, so that user can click it and can navigate to a form in oracle applications.
The link will be like http://shine.apps.com/function_id=670&language=US etc
I am able to display the form which the user wants, but they want the form to be queried with a value. so can anyone help me to how to pass parameters to the above url.
Thanks in advance
Srinivas Dodla

I achived the same thorugh workflow. In the workflow define a attribute of type form and then pass the formname, applicaiton name, resp name and any other form parameters to it.
You can mix forms personalization to achive best results.
Thanks
Prudhvi
www.erpschools.com

HT201441 If the previous end-user passed away suddenly and did not leave the password word with anyone, how then can the device be wiped?

My company issues iPads to certain staff for their line of work. If the previous end-user passed away suddenly and did not leave their iCloud password word with anyone, how then can the device be wiped. Currently we cannot turn off the iCloud, change the user, update the iOS, nor update our apps. Can the local Apple Store assist in some way?

I think Winston hit the nail. I imagine the issue is you allowed the person to set up personal and private accounts on the device, not corporate controlled accounts. As such, regardless of your ownership of the device, Apple will not release or change personal or private account-related information to you.
Whether they would or not to a direct family member, I do not know, but I highly doubt they will (or legally can) do so to you as the employer for a personal account.
I know such instances have come up in the past with things like company phones and such, both involving Apple as well as other companies. The reported results in news articles were always that private information is private, and if companies want access or control, then they need to restrict employees use to only corporate provided accounts and services.

Passing rendering format and report parameters in the URL to call a report - SSRS 2012

Similar Messages

Maybe you are looking for