How to hide the parameters in the url

Hi,
Can anyone help me to hide the parameters being passed in the url. For example, when a link is clicked i want to pass few parameters to it, but i dont want to display those parameters in the url. Can anyone help me figure out how can i achieve this?
Thanks
ri

In your CO's processFormRequest, do pageContext.putTransactionValue(name, value). You can retrieve the value using pageContext.getTransactionValue(name). Please use your own judgement to use Transaction or Session as the place holder as per your requirement. In most cases, transaction would do but if you want the values to be retained across transactions, use Session. Also, make sure to clear those values when you are done with the values so that this does not get retained across session/transaction.
Incase, you want the values only for the next submit and not for the transaction, you can use pageContext.putParamater() and pageContext.getParameter() which has a very short life cycle.
Regards,
Guru.

Similar Messages

Adding and reading the parameters from the WebDynpro Application URL

Hi,
I have a WebDynpro Application with two views. Based on the values populated by the user in the first view, I am pulling the data from database and populating the data in the second view. I do have a scenario where I have to skip the first screen and show the second screen directly. But, for the values that has to be populated in first screen, I am planning to append the parameters in the url and provide the link to the users via email.
Is it possible to add parameters to URL and read those Parameter values when user clicks on the URL.
Thanks & Regards
swetha.

HI,
Code for accessing params in webdynpro java:
String urlParamVal = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("URL_PARAMETER");
if((urlParamVal != null) && (urlParamVal.trim().length() > 0))
<Write the code>
Reading parameters:
Re: Reading URL Parameter
How to pass and fetch multiple parameter in the URL of the Web Dynpro
Regards,
Lavanya.G

Get the parameters from the URL

Hi all,
In my applet I need to know the parameters that are in the URL. But I don't know how to do this.
I started with this:
String URL=getDocumentBase().toString();So URL has the full url, like: http://127.0.0.1./test.html?Testparam1=hello
What I could think of is to use :
int i = URL.getindexof("?Testparam1");
String value =URL.substring(i);But that is not very handy when using more parameters.
Is there an other way to get the parameters from the URL?

You could use a regex or a StringTokenizer, but I'll bet there's a library somewhere that'll do it for you. Probably something in Apache Jakarta Commons. As far as I know there's nothing in the standard library that'll fully parse query strings for you, although you can use java.net.URLDecoder to decode the url-encoding (the %xx encoding).
If you don't want to find a specialized library, then probably a regular expression is the easiest approach.

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

How to hide Saved Searches in the header area of web ui

Hi All,
My Query Is how to hide Saved Searches in the header area of web ui.
For This is there any configuration or we have do through the code.
Thanks & Regards,
Venkat

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

In labview,how to calculate the parameters of the bilinear model that simulates the generation electroencephalogram?

Dear Sir or madam:
I have collected a lot of electroencephalogram data, which looks like a continuous sine wave plus a noise signal. what i want to do now is to fit the data with the bilinear model as the attached jpg file. the problem is the parameters of the model are changing with the evolution of the signal. would someone like to tell me how to calculate the parameters in the bilinear model?
thank you very much
Attachments:
Bilinear_Model.jpg ‏33 KB

I can point you in the right direction, but probably not answer your question really well. If you have the pro or full distribution of LabVIEW, you can use the curve fitting VIs to match any set of data to a theoretical curve. The curve fitting Express VI may do all you need to do (use the nonlinear option). To get the signal evolution, break your data into pieces and process each. If you need to average a bit, you can use a sliding window of your data for each analysis, moving the window less than the window width for each analysis.
There are a plethora of curve fitting techniques built into LabVIEW - matrix operations, linear and log linear fits, Levenberg-Marquardt methods, downhill simplex, etc. You will probably need to experiment a bit to get a stable
algorithm for your case. Check your literature for ways other people have done this. There may be an easy, stable method out there.
If you are unfamiliar with curve fitting techniques, or you do not have the pro or full versions of LabVIEW, I would recommend "Numercial Recipes in C" by Press et. al., published by Cambridge University Press. The chapter on Modeling of Data will get you going. The rest of the book will provide any background you need.
This was a very general answer. If you need something more specific, let me know. Be aware that this type of problem usually requires some trial and error to get right. The answers should be tightly scrutinized before being believed.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to hide some functions in the menu bar of flash paper

Do anyone know how to hide some functions in the menu bar of
flash paper? As I want to show a swf file(converted from pdf) on
the website without printing function. How can I do it?
Also, if possible, can anyone know how to hide all functions
on the menu bar except the logo of flash paper?
Thank you very much, it is very urgent.

Here is an article about how to integrate flashPaper into
Director. It has most of the functions that can be executed on
flashPaper. Maybe it will help?
http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
and here is all his code
http://www.mediamacros.com/item/item-1006687373/
Note: it is for 1.01, but works with 2.0

How to remove the underline in the parameters in the selection screen?

how to remove the underline from the parameters in the selection screen?
i came through the comment statements in the forum is there any other ways like setting some fields in the declarattion of the parameter itself?
like
parameter:p1 type string .......?

I dont think there is an alternative to removing the underlines other than to go for COMMENT. In the selection texts (of text elements) we can just give the parameter name or take the standard text from dictionary, but theres no option to remove the underlines.
SELECTION-SCREEN BEGIN OF BLOCK rbg WITH FRAME TITLE tit.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) text-001 MODIF ID sc1.
PARAMETERS:
p_param TYPE vbak-vbeln.
SELECTION-SCREEN END OF LINE.
PARAMETERS:
p_posnr TYPE vbap-posnr.
SELECTION-SCREEN END OF BLOCK rbg.

How to hide page number in the table of content

Hi,
I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
Thanks for any advice!

You have in the Inpspector > Document tab > TOC > uncheck button for #'s

How can you display the parameters on the actual report?

I need to display the dates that are entered in as parameters for the report. These parameters change each time the report is run. Is there anyway for these parameters to be displayed and printed on the top of the report?
Thanks in advance for the help!
Doug

Cristian - Thank you very much for the response. However, I do not have the "Edit Titles" option under the Sheet menu item. Could there be a difference in versions? My Discoverer version is as follows:
Oracle Discoverer(tm) 4i Plus Release - 4.1.36.22.0
Discoverer Model - 4.1.36.22.0
Discoverer Server V4.1.37.01.0
End User Layer V4.1.11.0.0.0
End User Layer dce.dll V4.1.37.00.0
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
There are "Edit Sheet" and "Edit Parameter Values" options but these do not have an option similar to what you mention below. Do you know of another method for doing this? Does anyone use the same version of Discoverer?
Thanks for the help,
Doug
Yes you can.
You Just have to modify the Title (Sheet-> Edit Titles)of the report. In The dialog box that appears there is Button that let's you insert diferent values, one of them it's the parameters of your report. This will insert all the parameters with the parameter name and it's value.
Hope this helps

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Can we change the parameters of the authentification's popup ?

Hello,
I'd like to know if we can change the parameters of the window popup of
authentification, when accessing a servlet, or an html page for example.
I created a realm, but i'd like to link it with my servlets or pages.
Thank you !

Actually I want to increase the screen size such that the browser scroll also expands and the pop up shows up and when the popup closes resizing happens.
Can you help me with some code samples of how to effect the above requirement?

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me..

I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
    P_MTR_ID VARCHAR2,
    P_FROM_DATE    IN DATE ,
    P_THROUGH_DATE IN DATE ) AS
    L_XML CLOB;
    l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
   ' AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ',''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = '
    ||P_MTR_ID||
    ' AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE('
    ||P_FROM_DATE||
    ',''DD-MON-YY'') AND (TO_DATE('
    ||P_THROUGH_DATE||
    ','' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML   FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '1'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = N3165 AND s_mtrch   = '2'
    AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)

The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id       in varchar2
, p_from_date    in date
, p_through_date in date
is
l_xml   CLOB;
l_query VARCHAR2(2000);
l_ctx   dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
    a.s_datetime DATETIME,
    a.downdate Ending_date,
    a.downtime Ending_time,
    TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
    TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
    TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
    (SELECT s_datetime + .000011574 s_datetime,
      TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
      DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
      ||'mi''), ''00:'
      ||'00'',''24:'
      ||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
      ||'mi'')) downtime,
      s_usage downusage,
      s_cost downcost
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''1''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
    ) a,
    (SELECT s_datetime + .000011574 s_datetime,
      s_usage downusage
    FROM summary_qtrhour
    WHERE s_mtrid = :P_MTR_ID
    AND s_mtrch   = ''2''
    AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
                       AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
    ) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end;

Where I setup the parameters of the Accounts Payable Negative Supplier???

When I try to run Accounts Payable Negative Supplier Balance, the parameter report definition haven`t value.
Where I setup the parameters of the concurrent Accounts Payable Negative Supplier Balance???
Can anyone help me?.
Thanks.

This report relies on the XLA Trial Balance data.
Please check whether you have created any Report Definitions or not.
Otherwise check the SLA Implementation Guide.
Chapter: Open Account Balances Listing
Section: Creating Open Account Balances Listing Definitions
By
Vamsi

About the parameters of the procedures

Hi,
Can we have a list for all the parameters of the procedures?
Thks & Bst Rgds,
Huamin

SQL> desc user_arguments
Name                                      Null?    Type
OBJECT_NAME                                        VARCHAR2(30)
PACKAGE_NAME                                       VARCHAR2(30)
OBJECT_ID                                 NOT NULL NUMBER
OVERLOAD                                           VARCHAR2(40)
ARGUMENT_NAME                                      VARCHAR2(30)
POSITION                                  NOT NULL NUMBER
SEQUENCE                                  NOT NULL NUMBER
DATA_LEVEL                                NOT NULL NUMBER
DATA_TYPE                                          VARCHAR2(30)
DEFAULT_VALUE                                      LONG
DEFAULT_LENGTH                                     NUMBER
IN_OUT                                             VARCHAR2(9)
DATA_LENGTH                                        NUMBER
DATA_PRECISION                                     NUMBER
DATA_SCALE                                         NUMBER
RADIX                                              NUMBER
CHARACTER_SET_NAME                                 VARCHAR2(44)
TYPE_OWNER                                         VARCHAR2(30)
TYPE_NAME                                          VARCHAR2(30)
TYPE_SUBNAME                                       VARCHAR2(30)
TYPE_LINK                                          VARCHAR2(128)
PLS_TYPE                                           VARCHAR2(30)
CHAR_LENGTH                                        NUMBER
CHAR_USED                                          VARCHAR2(1)
SQL>

How to hide dynamic parameters values in the URL with Reports 6i

Hi,
I want to know a way of hiding the parameters values when asking for a report through the web.
Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
Is there any solution?
Thank you.
Marma Bonfiglio.

Hi Rakesh,
I am using BI 7.0
The last option I have is 'Hide' for 'Calculate single values as' .
I have the below options for 'Calculate single values as'
1. Normalise according to Next group level Resul.
2. Normalize according to Overall Result
3. Rank number
4.Olympic Rank Number
5.Maximum
6. Minimum
7.Counter for all detailed values
8.Counter for all detailed values that are non zero
9.Moving average
10.Moving average That is Not zero ,null or Error
11. Hide.
So could you please tell me where i can find 'suppress result' option for the keyfigure .
Many thanks

How to hide the parameters in the url

Similar Messages

Maybe you are looking for