Past posting -report updation problem

Dear All,
Can i post the cash sales invoice for the past date with the current document date.
I am facing some problem in report.
when i create the cash order i changed the pricing date and request deklivery dat to the past (the system allows me to do it), i saved the oreder the system had created the order number and generate the delivery number automatically in the back ground , then i vlo2n i change the actual PGI ,Planned PGI date, Loading date, Picking date as the past date say eg 09092009 document creation date is say today.when i did the PGI the system has posted the posting date as 090909.(fine).
while creating the billing document the system has taken the pricing date as past 090909 because as i changed the pricing in teh sles order when saving the billing document the system posted the accounting entry on 090909.(fine).
when i run the report MC2 and MCQ the system has not updated thesales figure happened for the cash sales,
But when i run the same scenario for the credit (standard sales ) the system has updated the sales figure in teh said report.
Please let me know i am i mising anything in the sales invoice or the scenario is possible or not.
(i checkef th update setting in LIS everything is fine ).
Thanks ain advance
regards
Praveen S

Hi,
it looks you have missed some settings for the item category for cash sales in LIS. Say you run the same scenario without taking the date in past but todays date, are you still facing the problem.
cross verify your settings in update control in Logistic data warehouse
SPRO - LIS -Logistic Data warehouse - Updating - Settings Sales & Distribution - -
check all the nodes our here.
regards,
ashish

Similar Messages

Post-Firmware Update Problems--HELP

Several weeks ago I downloaded the Firmware update for my MBP. My MBP had an intermittent history of going to sleep and not waking up. When I ran the update, my MBP crashed and would not reboot. I had to obtain a copy of an original firmware disk from my local Apple dealer and load that in order to get my computer to operate.
Thereafter, using "original" firmware, my MBP had a regular problem with unexpected shut downs. I just got around to re-downloading and installing the recommended firmware update, and I am experiencing the unexpected quits again! Quits occur without regard to battery charge level. Since the update the quits happen within a couple of minutes of use. Before update the quits would happen later than the first couple of minutes of use. These unexpected quits are tethering me to an outlet and making me crazy.
1. Was the firmware update suppose to correct my original problem (not waking from sleep occassionally)?
2. Was the firmware update suppose to correct my new problem (unexpected quits)? If so, why didn't it?
3. Is it possible that the crash several weeks ago caused another software problem that is causing confusion regarding power availability?

I sent my computer in last week with that same problem, and another case issue. They repaired the case and replaced some sensors.
But when I called Apple because I was STILL having unexpected Quits when I got it back, they said the Apple Care technician couldn't duplicate the Quits.
Does anyone think this is a power supply issue? Because when I plugged it in and started it up, it seemed to be okay. Or is it a motherboard issue? It seems to be working now that I've run disk utility from the install cd, and since I've plugged it in. Should I send it back in?
-Amy
MacBook Pro 17" Mac OS X (10.4.8)

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

This is a duplicate topic with your other post. I will lock this one, please look here for responses.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH....

Updates July 5 corrupted - App Storele "Report a Problem" missing

Apps which updated today now crash (July 5). I deleted and reinstalled, but still crash. Apple Support suggest using "Report a Problem" in the app store - it exists for iPhone, but not for iPad.
I expect if I wait, the corrupt app that Apple is distributing will be corrected. But the bigger issue is how do we report such errors to Apple. Based on various reports that I am reading, this has happened to numerous applications.
HG

You can do this in iTunes on your computer. Here are the instructions.
http://appletoolbox.com/2012/03/how-to-report-a-problem-for-an-iphoneipadipod-to uch-app/
Or you can contact iTunes support here.
http://www.apple.com/support/itunes/contact/
For some reason, the Report a Problem link in the emailed receipts that Apple sends, has not worked for quite some time - at least from what I have seen.

This is just to report a problem with Apple updates. I updated recently and the computer brought up my 2012 desktop with all my 2014 files and data including stickies missing! Now I hesitate to do another Apple update. What would you do?

Apple Updates: This is just to report a problem. I updated recently and on restart the computer restored up my 2012 desktop with all my 2014 files and data including stickies missing!!! Now I hesitate to do another Apple update. What would you do?

If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.
If files are present, but seem outdated
You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection.

Unable to log into itunes store (0x80092013) and update problems

I am having problems logging into the itunes store using itunes 10.6.0.40 in Wndows 7 in the uk which results in the error message shown below:
'We could not complete your itunes store request. An unknown error occurred (0x80092013). There was an error in the itunes store please try again later"
However, I am able to browse the itunes store without any problems (this does not require logging in).
In addition selecting the menu item Help > Check for updates in itunes results in the message "The itunes server could not be contacted. Please check your internet connection or try again later'
I also have two ipods and an ipad and clicking on the <Check For Update> button on each of them within itunes results in the error message "The ipod update server could not be contacted. Make sure your network settings are correct and your network connectivity is active or try again later".
In trying to fix the above problems I have tried the following:
Re-installed itunes
Ran ipconfig /flushdns
Changed my dns entries to use dynamic dns entries and also tried googles settings (8.8.8.8 and 8.8.4.4)
Put entries in the hosts file for gs.apple.com etc
Reset the winsock using the command netsh winsock reset
Turned Norton smart firewall off completely
Ensured interent settings were set to 'Check for server certificate revocation' was unticked and "SSL 3.0" and "TLS 1.0." were both ticked
General internet connectivity is working fine it is just itunes where the problems are.
I can also log onto the itunes store from the ipad itself without a problem.
I also have a Windows Vista laptop which can connect to the itunes store without a problem and can also run the menu item Help > Check for updates and results in a message saying itunes is the latest version. This also runs Norton Smart Firewall and is having no problems. So I am assuming from this that my setup is not at fault and it is not an isp issue.
I have also noticed that a number of other people are reporting problems logging into the itunes store and also error 0x80092013.
The results of an itunes diagnostic test (Help > Run Diagnostics) are shown below (this shows that the itunes store can be browsed but attempts at prurchasing etc cannot be completed)
Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.0.40
QuickTime 7.7.1
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012AF0402B0FA18
Current user is an administrator.
The current local date and time is 2012-03-11 18:01:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Radeon HD 4870
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {46932D17-49B1-4170-9CA8-EA1A00438097}
Description: Microsoft Loopback Adapter
IP Address: 169.254.183.23
Subnet Mask: 255.255.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server: 0.0.0.0
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {58D508FD-AACB-4B61-B19B-D91F9FD1F400}
Description: Bluetooth Device (Personal Area Network) #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {4C3DB141-4DA2-4484-A598-E5B7ACD6E684}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller(NDIS6.20)
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Mar 11 17:05:46 2012
Lease Expires: Sun Mar 11 17:05:45 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to iPhone activation server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to firmware update server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-03-11 17:58:25.

I have spoken directly with Apple over the last couple of hours. They are aware of the problem and are going to ask their engineering department to investigate. It is perhaps not a big priority at the moment as they say they only have 30 confirmed reports of the issue worldwide.
Is it possible that there are other people who are having the same problem and are watching the forums waiting for answers? If so, please report the problem. This is the only way for Apple to understand the scale of the problem (if indeed it is a big problem) and to be able to escalate the issue and allocate suitable resources. The issue we are seeing is:
I mentioned what you said about downgrading - I have also contemplated this but I am expecting I will need to run 10.6 for HD media and syncing with the new iPad. Apple agree downgrading is not an acceptable solution, and there must be a way forward, but if you dont need 10.6 then why not downgrade until the problems are resolved.
My take on the problem is this:
The error code is the same as a Windows error code that suggests the issue is with accessing the certificate revovation lists (CRL). iTunes 10.6 is a signed application that needs to access a CRL to determine whether its certificate is still active. iTunes own diagnostic tool points in the same direction too. The network connectivity test (see image below) shows the network interface and internet connection are fine. It is just the secure link that is failing. It is possible to view the apple store, and download podcasts etc.. but it is not possible to sign into an account or make purchases.
One person has replied to many of these postings suggesting the problem can be fixed by updating DNS settings, which could add weight to this theory. The person who posted this didnt explain why this worked for them, but if DNS settings have not propogated fully for a new CRL this could be causing problems for some users. If so this could just fix itself in the coming days, or it may work if you can connect to the internet from a different connection like a public wifi hotspot.
I will post updates if I get anywhere or hear anything back from Apple.

My system won't boot past POST after I plugged in my new SATA drive. (SATA noob

I have a MSI K8n Neo 2 Platinum mobo with a Athlon64 +3500 and 1gig dual channel DDR 400. I currently have 2 drives set up a IDE primary (MAxtor 6Y120) and a IDE slave (Maxtor 6L080).
I recently purchased a Maxtor DiamondMax 10 6L300S0 300GB Serial ATA 7200RPM Hard Drive w/16MB Buffer.
It is my first SATA drive ever so non the less I am a newb. I want to use it as a non Raid media storage device while my primary IDE remains my boot OS drive.
I plugged the SATA in to the sata one port and powered it. I enabled the SATA in the bios with RAID disabled. When the system boots up it does the memory chech and lists all the IDE devices. Then it says "Detecting IDE drives..." and just hangs there. The new drive spins so it definatly has power but occasionaly it make occasional clicking sounds.
Once it actually booted up and windows detected it. I decided to reboot it just to play it safe but it never would get past post screen again. I can boot up the system normally when I unplug the SATA cable.
Please help I need to know if I am doing something wrong or I should RMA the drive. THANK YOU!

Got the same problem:
pata Maxtor Diamond Max =9 200 (40/160) Boot drive
AMD 64 x2 3800
Bios 1.2 090905 using MSi online auto update utility
2x 512 DDR double sided
X850 pro 128mb
PSU Sweetex 650w
Switched power supply
110/220 V switchable (220 V: 5 Amp/ 110V:10 Amp)
+ 3.3 V 28 Amp
+ 5 V 45 Amp
+ 12 V 25 Amp
-5 V 0.5 Amp
-12 V 0.8 Amp
- 5 Vsb 2 Amp PEAK 2.5
Max. 650 Watt
CE, FC
Boots perfectly with 1 pata, adda sata to sata 1 or 2 or 3 or 4
Boot stalls in bios at Raid setup. Tried enable raid with no drives enable , system booted twice, turned off overnight, then failed to start the next day. Will only restart with a cold reboot. Hot reboot produces a long BEEEEEP & power is on but nothing happens no post nothing.
SATA drive was taked from a working system (ECS 755a - AMD 64 3000 - PATA 200 / SATA 200), configured 40/160 40=OS Winxp 64 / 160 = data. System will not boot if this is the sole drive connected.

Purchase History Report a Problem feature

I was looking at my purchases and clicked the Report a Problem button, but the only thing that happened was that the button disappeared. Odd. Were they just joking? . . . "Ha-ha-ha, did you believe that? Just messin' with you. Bye-bye little button."
Well, ok, they must be serious, but the button just disappeared when I clicked on it, no joke.

I'm a novice to this community discussion board so bear with me. I have reported problems with apps in the past and done the steps I have done above and it came up with a drop down list of selected problems you simply chose one and sent it. This time round though I seem to have been redirected to the Apple Support screen which is a screen with multiple tutitorials, ranging from getting started in itunes, how to load apps etc, different devices I can't seem to figure out how to just report a problem. I then choose app (which seems to be the closest choice) and I just seem to go in circles. It's not itunes that is the problem it is the developers of the app as many others have the same problem with the app crashing my next best thing is to wait for an update for the developer to fix the bugs. Which I hope they read the reviews left by consumers. Thanks for your reponse though.

Drivers / update problems on X230T

1. My UltraNav (Synaptics) TouchPoint and TouchPad work only until I log in to Windows (7 Pro x64). Telephone support suggested (after I got disconnected 3 times) that I use LSC to reinstall the driver, but I find no way to reinstall drivers in LSC.
2. LSC and Device Manager report a problem with a "Base System Device", but I find no further identifying information in the device properties, and Windows Update fails to locate an appropriate driver.
Presumably this is the related error (as seen in msinfo32):
29.05.2013 17:40 Windows Error Reporting Fault bucket , type 0
Event Name: PnPDriverNotFound
Response: Not available
Cab Id: 0

Problem signature:
P1: x64
P2: PCI\VEN_1180&DEV_E822&SUBSYS_220317AA&REV_07
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

...
There are many other error reports with the same fault bucket type, stretching back to my first commissioning of the laptop.
3. LSC shows no corresponding alerts, but the installation history in TVSU 5.02.0011 reports one package that "did not install" and one which "did not download". I was able to find these on the lenovo support page and download them, however, the second (Ericsson F5521 Mobile Broadband Driver) reported "Device driver software was not successfully installed" and specifically "Base system device - No driver found". Presumably this is the missing driver from 2 above. Despite the error message, the installation still demands a reboot. I have found an additional driver for the Ericsson F5521 on the lenovo support site and will attempt to install it after rebooting.
P.S. The second driver reported successful installation, and, when subsequently reinstalled, so did the first one.
Unfortunately, the problem with the missing driver for "Base System Device" in Device Manager persists.
Furthermore, since installing the Ericsson drivers, I get a crash report from MobileAccess.exe every time I start the computer.
P.P.S. going back to 1 above, uninstalling the UltraNav driver (from Device Manager) did not help. I had to uninstall *and* check "delete driver software. On the next restart, an earlier driver (16.1.1.0) was installed, which works.
Based on the HW ID, the mysterious "Base System Device" would appear to be the SD/MMC card reader. I found a driver (2.14.18.01) on the lenovo support site and will report back the results of my installation attempt after rebooting.
P.P.P.S. Unfortunately, the driver installation did not resolve this. Seeing that the Ericsson driver ahd been installed under "smart card reader", I uninstalled it, deleting the SW, but that didn't help either. A manual update of the driver for "Base System Device", pointing it at the driver which had been unpacked in C:\SWTOOLS\DRIVERS\multicard\Driver was also unhelpful. Then I saw this post, and noticed that the HW IDs in risdxc.inf did not match those shown in Device Manager. I have edited the file and reinstalled, acknowledging the "unsigned driver" warning, which presumably resulted from my tampering with the file. I will report back after rebooting.
P.P.P.P.S. I no longer get any complaints about "Base System Device", and even though I can't find the Ricoh SD/MMC card reader in Device Manager, the card reader seems to work. Now all I have to do is to reinstall the Ericsson driver ;-}
P.P.P.P.S. After reinstalling the Ericsson driver, LSC shows a clean bill of health. However, MobileAccess.exe is still crashing on system start. Since this page (the only one I could find on Mobile Access) does not mention Switzerland, and since I didn't get a SIM card from lenovo, I am just disabling startup in msconfig for the time being. I could have sworn getting it to run immediately after installing the Ericsson SW, and seeing a drop-down list in the Activation Wizard offering Swisscom as provider though !? Go figure.
X320T running Windows 8 Pro x64

To get the Ricoh driver installed properly, I had to edit risdxc.inf and reinstall again.
There seem to be 2 HW IDs associated:
PCI\VEN_1180&DEV_E822&SUBSYS_220317AA
and
PCI\VEN_1180&DEV_E823&SUBSYS_220317AA
However, since updating the X230T drivers, my BlackBerry Desktop Software (7.1.0.41) no longer sees my BlackBerry, so I can no longer sync it locally.
The Ericsson adapter seems to be working, even though MoibileAccess.exe isn't. I could get a connection using the Swisscom SIM card out of my BlackBerry.
In retrospect, I should probably have ordered a SIM card from lenovo, as it appears that would have given me 3 months of free mobile WAN via Swisscom. Unfortunately, Switzerland was not listed on the lenovo website as one of the countries in which the offer was available.
I would still be grateful for any hints as to what is wrong with MobileAccess.exe and how to fix it.
X320T running Windows 8 Pro x64

I can't copy and paste after i updated to ios8

I cannot copy and paste after i updated to ios8. Everything is slower and I can't connect to my home internet. Resetting does not help.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Nokia Software Team...Why all the update problems?...

Do the nokia software team ever look at this forum? I really dont think so because they would know the problems that people, not just on this forum, but also other forums are having with the Nokia Service Updates. I do realise that many people have updated various models with success, but also a great number have had many different problems. Certain key features no longer work, phone dies totally half way through updating, phone freezes, wifi problems, and these are just a few of the problems encountered. Firmware and software updates are meant to eliminate these problems NOT create them. You really would think that the years of experience in this industry that nokia would get it right. I have used various Sonyericsson phones in the past and successfully updated the software at home using their update service on many ocassions and never had a single issue. My N91 has been taken to the service center, and i will never have the confidence to try and update at home again!!

I have posted before on this subject.
Im sure many users have had success with this fantastic bit of kit , and is welcomed by some who do not have a local Nokia Service centre, and annoys others who's handset is not supported yet !
I have been reading many posts from users who have lost items from the menu systems and other features and worse their handsets going off line.
I would like to bet that when this came online the Nokia engineers were shaking their heads in dismay waiting for their doors to open for people coming in with a frustrated worried look on their faces.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

How do I report a problem for an in app purchase

I have recently bought bits for an app but never got them.
I click on 'report a problem' on my statment and it keeps bring me to
http://www.apple.com/uk/support/itunes/
I have done this in the past but did it all through itunes and it never took me to this page
I was wondering if anyone knows to how claim for this.
Thanks

You probably cannot get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you.
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Item Seller Type Unit Price iBlacklist - Block Unwanted Calls, v1.0 (4 ) Write a Review Report a Problem Max Kub App $4.99 but show other application"secret contact" on screen .can't block any contact

Item
Seller
Type
Unit Price iBlacklist - Block Unwanted Calls, v1.0 (4 ) Write a Review Report a Problem
Max Kub
App
$4.99
but show other application"secret contact" on screen .can't block any contact. so seems tyhat i order one aplication "iBlacklist - Block Unwanted Calls, v1.0 (4 )" but get another application "secret contact "as it appear on screen ????

Reply to n82phone:
what you are telling i think is too much. I've read your requests and believe me some of them is out of context. One example is listening to radio while being on a call. Who would like to have such options?? It's ridiculous.
But But it doesn't mean all of them are ridiculous! Just like the #1 concerning music, #4 concerning the camera and #5 concerning the volume, I strongly agree with you as it makes sense!
So if I was to write to nokia, which I will do in the coming days is to write them again:
Points #1,4,5,9,11,14,15,24! These are strong points!
People out there, if you want the changes I specified to be done by nokia, you should write them the same points. If only one or two write, it's useless, they won't take it as a priority.
Of course, don't copy paste or they will think the same person is spamming them. I hope it's clear. Write in your own words. Don't think changes will be done by magic or by doing nothing with arms folded. You should do a move.
THIS IS A USER TO USER FORUM. YOU CAN POST YOUR PROBLEM HERE. WE'LL DISCUSS ABOUT IT, THEN ALL OF US SHOULD WRITE NOKIA TO CORRECT THE MATTER IF IT CONCERNS FIRMWARE. FOLLOW THE LINK "CONTACT US > CALL OR EMAIL NOKIA CARE" TO REPORT THE PROBLEM TO NOKIA.
Thank you
Message Edited by fafanne on 18-Oct-2008 01:51 AM

Past posting -report updation problem

Similar Messages

Maybe you are looking for