Pay Grade Types & Areas

Hi sapients,
I have one doubt, i.e, what is the use of Pay grade types & areas, is it similar to Payscale Groups & Levels.
Could you please help me.
Regards,Pavani.

There is no clear distinction between these two. Its more dependent on which modules you want to implement in HR. Both are same. But Pay grade (types, area, level etc) is used in the Pay structure ie T710cl where as the Pay Scale (area, types, groups, levels etc) are maintained in T510N (For annual salaries i.e. what you see in IT0008 PA side)
If you want to implement Compensation Management you have to configure the T710CL table but If you dont want to implement Comp module but you do want to go for PA/OM modules you have to configure the T510N table (i.e. Pay scale groups, types etc) to be able to default in IT0008.
Reward points if this helps
Sanghamitra

Similar Messages

Assign pay grade structure to employees

Hi all! I am have already created a pay grade structure , can anyone tell me how do i asssign the pay grade structure to employees? thanks in advance!

Hi,
Maintain the values for pay grade type and area in table V_001P_C and assign the values to PA and PSA.
Then default the type and area under TARIF feature by giving a value.
In IT 0008, if it reflects as Payscale with Type and area... change it to Salary using Edit -> Change Remuneration Type and it would reflect the Pay Grade contexts.
Regards
Nima

Enterprise Compensation Management - Pay Scale and Pay grade

Hi Gurus,
I would like to like to know my understanding is correct.
1) ECM supports only Pay Grade (T710) and not Pay scale (T510). If so, company using pay scale will not be able to implement ECM? If not please provide the solution (how ECM can be implemented if company use Pay scale t510).
2) Can Annual Salary be pro-rated for part-timers, using capacity utilization level (CUL) in IT0008? I configured WT ASAL with reduction '2' in wage type characteristics under section 'Indirect valuation', but when i enter 50% in CUL, it is still reflecting the ASAL for 100%. So SAP does not support CUL for ASAL. if not please let me know what is missing in the configuration.
What is the best way to handle part-timer?
3) Show part time salary in compensation planning [ By implementing BADI for Calculation Base] and then convert back to full time salary?
IT0008 Maintained with the following info.
e.g. employee work for 20 hrs. a week. (40 hrs. per week for full time)
CUL is 50%
Monthly salary is 2000$
Employee's salary is 1000$ (Actual)
To sShow 1000 $ in planning worksheet for managers and covert to full time during Activation?
What is the SAP best practice and recommendation and why?
Thanks for reading my thread.
Waiting for reply.
Thanks
Regards
Senthil Bala

hi suresh
just a doubt
when we create the compensation program records 0758 we specify the 1 and 2 program groupings along with the comp area
so even when we default them to the required paygrade groups
does the RHECM_CREATE_COMP_PRO look at the 758 record of the employee and create the records thus excluding any one with less grade group and those messages?

Infotype 380 : need to manage Pay grade and Pay Grade Level, possible ?

Hi,
in my process i need to manage the pay grade and the pay grade level. In the structure of the infotype 380 this fields are present, but not display in IT0380 in PA20/PA30.
Is it possible to setup this fields ?
Thanks
Cheers

Hi,
This is part Job Pricing in Compensation Mnagment.
Where you can define the Maximum and mimum amount for a job.
through Infotype:1005(Planned compensation) thru pp01 tcode.
For this in Infotype you will be using Rumenration type as payscale type.
You need config the Pay scale grade level.
Note:Payscale area,Paysclae type is differnt from payscale grade and level.
in terms of config,but use is same

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be fund raising, gift p

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be dependent on the customer type selection from the first list. Some examples would be: fund raising, gift planning, surveys, and others. The purpose of the trip would be dependent on the program type selected from the second list. Some examples of trip purposes would be: presentation, design, prospecting. Further, the purpose of trip selection from the third drop-down box would then have to determine the values of other fields by expense type: such as commission, airfare, hotel. etc. I've tried pop-up menu but can't figure out how to "select" from the final popup list and have it populate a field for the purpose of the trip. I've tried to look at the JavaScript examples for dependent drop-down boxes, but can't find any that quite fit what I'm trying to accomplish. I am very new to all of this. No training in writing Javascripts - just trying to wing it. The form has to be very simple for our consultants to use, but also give our office the detail we need to process through the correct account numbers. I would appreciate any detailed step-by-step instructions - kind of a javascript for dummies type of info. HELP!

An AcroForm is the name given to the type of PDF form that you create in Acrobat. An XFA form is the type of form that you create in LiveCycle Designer. Although they are both PDF files, they are very different structurally and have significant;y different scripting models. So pay attention to the information on AcroForms and ignore anything about XFA. Be sure to get the sample PDF forms so you can look at how it works and where the scripts are placed.
What you want to do will require scripting, and if you don't have the experience and are unable to use the information in the tutorials to create what you want, you might consider getting someone who has experience do this for you. I'll often suggest code if I can do so quickly, but what you want requires more than a few minutes.

Pay Grade Structure

Hi,
I am setting up the pay grade structure. One alternative i have is to use descriptive terms in the PS Grade field and the numeric grades in the level field.
For example,
PS Grade: Top Mnt
Level : 10 - 12
PS Grade: Sen Mnt
Level: 7-8
PS Grade: Jun Mnt
Level: 4-6
PS Grade: Clerical
Level: 1-3
Now i understand that the level field is not meant for this purpose and is actually a subdivision of Grade. But my question is, what difference does it make? Will it possibly have an impact on Job Pricing and/or Salary Survey processes in the future? (which we have not currently configured).
Please share your opinions
thanks

Hi Jamie,
Interesting usage. I like the idea. Is it 80% of the min or max of the salary scale? Are you enforcing this through a user exit?
Ok, so the grades and levels can be used flexibly. i had asked the question due to some confusion developed after reading on the Peromnes system of job grading. This system uses categories like Top Mnt, Sen Mnt, Mid Mnt, Jun Mnt and Clerical for the grades with 3 levels in each. But i have decided to go for simple numeric grades because the client was having difficulty in deciding which grades will be default for which employee sub-groups.
thanks
> Hi Zubair,
>
> When using pay grades the level field can be used for
> whatever seem fit for the company you are
> implementing for. For example in our case we used
> the pay grade level to be 80 to 04, ie: 80 = 80
> percent of the salary at 100 percent for that pay
> grade.
>
> Make Sense.
>
> Jamie

Differences between Pay grades and Pay scale

Dear all,
what's the exact diff between Pay grades and Pay scale ?
Thanks in advance........

Hello Madhu,
First fo all are you looking for the difference between payscale group & Pay scale level?
if yes then this is as follows
Pay Scale Group: A pay scale group is a criterion used for grading job evaluation
Pay Scale Level: The pay scale level is a criterion for job evaluation within the pay scale group
Regards
Uday

IT0008- Pay Grade

Hi SAP Experts,
We have got requirement from client that they would be adding a new paygrade in May called 15, and they will be delimiting existing paygrade called 14,
they are planning to move all the employees who are in paygrade 14, to New paygrade 15 ,
So i need your expertise help to what are the things i should take care of while creating new paygrade and delimiting old one. What are the tables should i check, what would be the impact.
We are not running payroll . but running time evaluation calculate Absence Quota and OT, where both are not dependant on this,
Please help me
Thanks in advance
Regards
Sri

Hi,
This is how we have maintained in our company.
Consider table T710 is used to store pay grade information (sm34 - V_T710CL)
Reference Salary is maintained in T710A (which can be maintained via sm34 - V_T710CL_B)
Pay Grades are then associated to jobs which are related to positons.
Step 1: Suppose for example Grade 24 is delimited and a new Grade 24a is created, we need to find the jobs (HRP1005, OTYPE as C, END DATE as 12/31/9999 and TRFG1 as 24) that were associated to Grade 24, change it to Grade 24a from new start date (this can be done in PP01 - Planned Compensation Relationship)
Step 2: Find the personnel numbers that are associated with the job in step 1 (Job - Position - Personnel number relationship). Consider PA/OM integration is active, trigger a JS Action for the personnel numbers in step 2, new records will be created in infotype 0000/0001/0007/0008 (and other configured infotypes)
Hope this helps.
Thanks,
Sriram

Which usage types are charged to my bill?

Last month I had the following usage type totals for my main cell phone:
Minutes by Usage Type Report
PlanAllow,PromoAllow
8
PlanAllow
289
Overage
40
N&W
18
PlanAllow,CallVM
3
M2MAllow
158
N&W,CallVM
2
PromoAllow,PartAllow,Overage
9
PromoAllow
18
Total
545
The total on my bill was 342 minutes and I can't figure out which types are included in that total. I was told that any type with 'PlanAllow' or 'Overage' would be included, but that adds up to 329 if I only count the 'PlanAllow' and 'Overage' figures. If I also include the other types that have 'PlanAllow..' + additional, e.g. 'PlanAllow,PromoAllow', I get 349. So where does the 342 come from?

Since you've asked, we have the
NATIONWIDE TALK SHARE 1400
Includes:
Monthly Account Access Charge
Monthly Line Access Charge for 3 lines
1400 Shared Monthly Allowance Minutes
Per Minute Rate After Allowance: $0.40/min. Peak , $0.40/min. Off-Peak
I'm not sure why it would make any difference which plan. I'm a software developer and typically there are uniform algorithms based upon fields like Usage Type that determine what's included and what's not included in a total. I'm not sure why Verizon doesn't just add a column in the data they provide that would indicate whether particular call's minutes are included in the bill or not, unless they're trying to obfuscate the numbers so that customers get frustrated in trying to figure out how Verizon calculates the total minutes that can be charged at the exorbitant $0.40/min. rate.
The numbers I've posted were for just one of our three phones and our overages for that month added up to $110. I had recently reduced our plan from 1400 to 700 minutes, but in doing so I had to give up the Friends and Family program. With that much overage I really wanted to be able to analyze where the overages were coming from, but based upon the data provided I can't. I've subsequently increased my plan back to 1400 minutes even though we are usually well under 700. To Verizon's credit, they were willing to waive the difference of the overage minutes and what it would have cost if I had kept the 1400 plan, but I'd still like to be able to reconcile their provided data and analytic tools to my bills so that we can manage our calling behaviors in a way so that we don't end up paying for an extra 700 minutes per month that we don't use.

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Pricing ZCondition Types are not appearing in Condition Record Maintanence

Hi All,
We have a requirement in SAP CRM Opportunity Management where the pricing determination should happen. So, to facilitate the requirement we have done the following
Downloaded the DNL_CUST_CNDALL and DNL_CUST_CND from ECC to CRM
But the Problem is when I am trying to maintain the Condition record in T-Code "/SAPCND/GCM" 　our Z-Condition types are not appearing in the list, also in Product Master Condition Tab.
Please suggest me how to resolve this issue.
Regards,
karthik J

Hi Karthik,
As a best practice -
1. If you are downloading the condition type and pricing procedure from ECC, then it is advisable to use ECC as a master system for all your Z condition type/condition record maintenance.
2. Similarly if you are using Pricing procedure as of ECC, then ensure that the downloaded pricing procedure in CRM is used for pricing procedure determination.
3. The condition record in T-Code "/SAPCND/GCM" is advisable to use if you are mainly using CRM Pricing.
By looking at your problem statement you are using ECC pricing procedure, condition types by downloading it to CRM.
If you have any other comments to make, please give the exact problem statement or any appropriate problem screenshot for further analysis.
Hope this will be useful
Thanks and Regards
DJ

GeoMedia - Primary key types are not matching

I'm working on converting Access Spatial layers into Oracle Spatial layers using the Locator in Oracle 9i.
I have the Access PK as Long Interger
and the Oracle PK as Number (10,0).
I can't get around this error : Primary key types are not matching

Hi,
please refer to
http://www.oracle.com/technology/pub/notes/technote_access_migration.html
You may try the OWM (Oracle Migration Workbench), if your data are more complex than one or two tables.
regards, Andreas
long integer(access) Number(11,0)(default) Number(11,0) (recommended)
-----

Pay Grade Types & Areas

Similar Messages

Maybe you are looking for