Payement terms Baseline date

Hi All,
I had a billing document created on 01.04.09 and I am releasing the same to accounts on 05.04.09. Now my billing date will be 01.04.09 and payment terms C010 will start the calculation of the given 10 days from 01.04.09. But I need the start date should be the release date i.e., 05.04.09. For this I have changed all the given options in OBB8 " Default for baseline date ". But still system is taking the baseline as 01.04.09 only.
So can anyone suggest me how to change the baseline date as per my requirement.
Regards
Ratna

The payment term config only takes the baseline date from the Billing date even if u put the entry date or anything else there.... all those settings are for the FI documents posted manually......
whenever u use VF01 the baseline date is the billing date....
Now how to change it: if u have a sales order then there is a field called Value date.... it passes the value from SO to billing..... so if u put the value date as 05.01.2009 then the baseline date will capture the value date... so whenever the value date is given then syytem picks up that date instead of the billing date..... This field is not editable in the Billing document..........
Also u can change the baseline date manually after FI doc has been posted but it will only affect the AR aging not the actual invoice...

Similar Messages

  • Payment terms - Baseline date calculation.

    Hi
    In payment terms configuration, we have option "No Default" for determining Base line date.
    If we have payment terms with above configuration.......
    In Fi, Baseline field will be blank while posing Customer Invoice, in which case We can enter baseline date manually. However If Invoice is generated from SD-billing document, we dont have any field "Baseline date" while posting billing doc. In such case how system determines Baseline date. When I checked few billing documents, Baseline date is defaulted with BIlling date even "No default" option is selected.
    Is there any configuration in SD that prompts this action. or is it always billing date is defaulted ?
    Please clarify

    Hi !! Madhu,
    There is a way, but not exactly what u require! You can check while maintaining the condition records in t.code VK12, observe the last two columns available, one is called a 'Fixed Value date' & the other is called 'Add Val Days'.
    If you make any entry in the field 'Fixed Value date' this will be the date from which the payment terms start taking effects. Or if you make an entry in Add Val Days' in this case the payment terms start taking effect from billing date + the no. of days mentioned in this column.
    You cannot make a entry in both 'fixed value date' & 'Add Val date'  fields at one time.
    Give your feedback if this has worked for you.
    Regards,
    PATHIK

  • Payment term baseline date in SD

    Hi, all:
       In the configuration of payment term, there are four criteria for baseline date:
       no defalut date; entry date; docuemnt date; posting date.
       For SD receivable items, what the "entry date" and "docuemtn date" respectively stand for when calculate the open item receivalbe due date? Does "document date" mean billing docuemnt date or order date?
      Thanks for your explanation!
    Justin

    Dear Justin
    Document Date is the date on which you do a particular transaction.  It is neither order date nor billing date.
    Thanks
    G. Lakshmipathi

  • Baseline date determination for Vendor Payment Terms

    Hi gurus ,
    Here is the question :
      In Financial Accounting> Accounts Payable & Recievable>Vendors>Business transactions>Maintain Payment Terms
      While maintaining payment terms Baseline date needs to be determined . What is the importance of Document date and Posting 
      Date for maintaining payment terms for vendors ?
    Could anybody give some information on teh influence of Document Date and Posting Date formaintaining payment terms for
    Vendors.
    Any help is rewardable since i m a technical ABAPER have very little knowledge about FICO Functional.
    Thanks
    Kylietisha
    Edited by: kylietisha on Jul 22, 2010 6:14 PM

    Hi,
    Suppose your Document date is 1.1.2010 and Posting date is 5.1.2010.  And payment term 10 days for discount 5% and no discount thereafter.
    If you set the baseline date as Doc date, your due date falls on 11th. Which means you cant post discount 5% if payment received after 11th.
    If you set the baseline date as Posting date, your due date falls on 16th.  Which means discount is given till 16th.
    Hope this clears your doubt.
    Ravi.

  • Baseline date, terms of payment, net due date in MIRO Parked document

    Hi all:
    When parking a docuement in MIRO with a PO reference the terms of payment, baseline date, and due date are all determined.
    The problem is when we don't have a PO yet, just the vendor and the amount, is there a way for MIRO to determine the terms, baseline date, and due date from the vendor master?

    Hi,
       Just enter the Vendor in MIro and it should pull the Payment terms from the Vendor master (Company Code Area).
    Baseline Date & Due Date are derived based on the settings in the payment term.
    KInd regards

  • Baseline date & Payment terms are not populating for Intercomany vendor

    Hi,
    When we post intercompany invoice & check the vendor line items in FBL1N,it is expected to have data payment terms & Baseline date from the posted Invoice.this is occuring fime with single company but this data is blank for Intercompany which is creating issues for further steps.
    Anybody has faced such issue? What may be the resolution?

    Hello,
    Why are you directly executing these programs?
    You will not expect these program to execute directly by going to SE38.
    I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
    For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
    Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
    The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
    Hope this is informative and solves your issue.
    Regards,
    Ravi

  • Debit memo(DR doc type) baseline date exceding the payment term days

    Hi All
    For debit memo I am facing a issue where my baseline date for a customer is showing more then the days specified in his(customer's) payment terms.
    sales document category is DR and order is created for some customer xyz and payment terms of that customer is showing 0% UP TO 15 DAYS. But when I check it in FBL5n the Net due dt for that order is showing 180 + 15 = 195days.
    What can be the reason, is it due to some enhancement or some routine or what , I am not able to figure out from where these days are coming for. I have checked MV45AFZZ , RV60AFZA and other exit s, I couldnt find any code which shows these added 180 days..
    Guide me in finding out the source ot this, <removed by moderator>.
    Thanks in Advance
    Regards
    Amit
    Edited by: Thomas Zloch on Sep 30, 2011 3:46 PM

    HI,
    You may need to check the copy control settings between the debit memo request and sales document in transaction code VTAA.
    Select the target document type and source document type, and click on the details (header level). Check the routine that is assigned for the field copying requirements for transfering business data.
    The routine assigned may be copying the base line date from the source document. You may need to assign other routine or you may need to develop your own routine to resolve your issue.
    Regards,

  • BaseLine date different from Terms Of Payment Date

    Hi,
    My client posted 3 documents dated 23.12.2009,17.12.2009,14.12.2009  respectively. The terms of payment has been set to accept document date as default for the baseline date. This means that the baseline dates for the  documents should be same as 23.12.2009,17.12.2009,14.12.2009  respectively. However, the system has set 31.12.2009 as baseline dates for all MIRO documents. I have already checked Terms Of Payment  ,Vendor Master and the posted documents.
    Can anyone please provide any clues to this problem?
    Thanks In Advance
    Regards,
    Payal Saxena

    Hi Payal
    Request you to check settings for PT in OBB8
    Also, refer to this thread - Baseline date in payment terms_reply the question for FI experts
    If the problem still persists, you will require a user exit.
    Rgds,
    Zub

  • How to get default baseline date in a payment terms

    Hi,
    We have around 160 payment terms used in our system. We want to get the default baseline date for all these payment terms. Going to each individual payment terms and getting the default baseline date is a cumbersome job.
    Is there any easy way to get the default baseline date for each of the payment terms, like from any table or anything else. I have tried table T052. But it does not have default baseline date.
    Please help.
    Regards
    B.Mohanty

    Hello Bibhu,
    default baseline date is a customizing setting in paymentterms. That's the only way.
    I have no idea why TC lsmw is recommended, definetely the wrong way.
    Best regards
      Horst

  • Payment term and Baseline date are not appear after residual clearing

    Hi Friends,
    We have an issue in Payment term. Recently small changes were made in OBA3.Here they enable the option of "Payment term from invoice". the function of this is to - copy  the payment term and baseline date form invoice to Partial item .Due to enable of this function after residual clearing the payment term and base line fields are get empty.
    Now user want to get these fields to be updated even not changes take place in OBA3.Can you please suggest me the way,  with out changes in OBA3 can we get payment term and baseline date field after residual clearing .Please suggest .
    Thank you
    Regards,
    Dharma

    Hi Julie,
    Thanks for your reply..
    Here the issue is, the user using Baseline date for two specific purpose.
    1.Due day calculation-auditing purpose
    2.Agning report
    For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
    But for aging report purpose it has to be update posting date.
    now user want to meet these both requirement .How can it possible .Please suggest.
    Thank you
    Regards
    Dharma

  • Baseline Date of terms of payment

    HI,
    I need some help with something, how i can enter the baseline date of term of payment manually? I see in the OBB8, that appear 4 option of baseline date, but not manually.
    Is there any configuration in SD that prompts this action?
    please give me your answer with detail, i new in this.
    Thankz,

    Hi Ryan,
    in the default for baseline date - select No default.
    while creating a sales order you can enter the date on which baseline date should be considered for calculating the payment terms days. this field is avaiable in Billing Tab of Sales order at Header level and Item level.
    Please let me know, if you more clarifications.
    thanks
    rajam

  • Baseline date change OBB8- payment terms

    Hi
    Is it ok to change the baseline date in a payment term in OBB8 after posting several invoices? What consequesnces should this change have?
    Thanks in advance
    Aparna

    This will effect for the all pending invocies. The effect could be change in the payment schedule for the vendors.

  • Baseline  date in payment terms

    Hi experts,
    There're 4 kinds of baseline dates in payment terms: no default, posting date, document date & entry date. I have gone through the relevant thread & tested in the system.
    However, I found no differences among them, i.e. no matter which baseline date is selected, billing date automatically captures actual delivery date from delivery when creating invoice.
    Why? Is there something wrong?
    Plz help. Many thanks.

    As I already mention, baseline date for payment is the date from which the terms of payment apply.
    So,
    - No default for the base date, this Indicates that no default value is required for the baseline date for payment. You then have to enter the base date manually during document entry.
    - Propose posting date, this Indicates that the posting date is to be proposed in the base date field during document entry.
    - Propose document date, this indicates that the document date is to be proposed in the base date field during document entry.
    - Propose entry date, this indicates that the entry date is to be proposed in the field Base date during document entry.
    Where,
    Base Date is the date to be entered in the header of a document.
    Posting Date is the date on which a business transaction is transferred into one or more accounting ledgers on document entry.
    Document Date is the date on which the original document (such as vendor invoice) was created.
    For understanding refer following links:
    [Terms of Payment|http://help.sap.com/saphelp_40b/helpdata/en/96/8b3fc643ce11d189ee0000e81ddfac/content.htm]
    [Baseline Date for Payment|http://help.sap.com/saphelp_46c/helpdata/ru/e5/0783804acd11d182b90000e829fbfe/content.htm]
    Hope this can assist you.
    Thanks & Regards
    JP

  • Payment terms and Baseline date deact. during posting

    Is it possible to deactivate fields: Payment terms and Baseline date in FB60 and MIRO so that the user can't change them? Terms of payment are defined in Vendor Master Data and shouldn't be changed during posting.

    Hi,
    You can use Screen Variants using T.Code  SHD0 . You can make certain field as display only. You can use the help of your abapers......
    Assign points if found useful
    Regards,
    R.Ramakrishnaraj

  • Baseline Date - Payment Terms

    Hi,
    The users have created the Payment Term for the Credit Management purposes and the same has been maintained in the Customer Masters. While creating the Payment Term, the Default for baseline date has been specified as "Document Date". Thus the baseline date is required to be same as the Document Date. In case of all invoices we observe that the baseline date is same as the Document Date, except for few where we notice the Baseline Date has got changed thus impacting the AR Aging.
    Could you please advise as to how could the baseline date get changed ? What could be the reasons and how do we check the same ? There were no manual changes made to the Accounting Document. Also what can be done to prevent the same from happening in future ?
    Thanks in advance.

    Hi,
    we faced the same probelm before for Invoices (MIRO).
    The USER after filling the details checks that he entered the Invoice date wrong and corrects the invoice date and saves the doc. when he does this the baseline date is not getting updated by the change of invoice date.
    here The baseline date is updated only after the reentry of po no. or deleivery no. whatever he is giving the details in MIRO.
    we did a lot of investigation with this baseline date problem.
    please check with ur user as to he might be changing the invoice date befor saving. if he changes the invoice date he also need to update the delivery no below.
    regards
    jaya

Maybe you are looking for