Paying to Employee

Hi
Here we dont hv hr module.
But we need to pay salary n travel amount to vendor.
Can we treat the employee as vendor and by using the reconceliation account we can setle the same.
Is this the way? or any other solution.
How to handle this?
Vijay

yes
u can create a employee as vendor
but u cant manage the deductions in the system
u can only pay full amount like 10000
for deduction u have to do it manually
regards
kunal

Similar Messages

APP-PAY-07804: Employee will not be terminated

hi,
we are working in oracle applications 11i.
On the attempt to end the employment of some employees from People Enter and Maintain form I need to enter some data to the form; while there are no manadatory (yellow) fields". If I entered the *LEaving Reason* ,I get the following error,when saving:
*APP-PAY-07804: Employee will not be terminated*
*You have not entered an Actual Termination Date so the employee will not be terminated. Choose OK if you want to save the information you have entered.*
is this a standard functionality from Oracle?
thank you

Yes, that's standard Oracle functionality. You MUST enter the employee's Actual Termination Date (their last day of service) to terminate an employee.

Quick pays for employees that have a direct deposit payment method?

Can you perform quick pays for employees that have a direct deposit payment method?

Dear User,
You can perform the activity, only pre-requisite is the the given employee should have a Direct Deposit Payment Method associated with him.
So, when you perform Quickpay and Quickpay-Prepayment, it will take the Direct Deposit Payment Method.
Otherwise, if your payment method is blank for the employee, the Quickpay-Prepayment will take the default Payment Method defined in your Payroll (Generally this is Cheque or Cash)
Regards,
Ameya

Question about OTL additional hour pay if employee didn't submit meal break

I have a question
Does OTL capable of adding the standard rule where the employer is required to pay an employee 1 hour of additional pay if they did not have their 30 minute meal period after working 6 hours? In those rare cases where employees are not doing what they are supposed to do, it should be an automatic process.

Dharma,
I guess you are talking about California Meal penalty rule. Well, it is not supported in OTL. On the other hand, Oracle has the hour deduction policy setup which actually deducts hours for a given duration. I haven't tested this, but just try using that feature with a negative deduction.
--Shiv

Check Maximum Net pay of Employee

Dear Expert's,
Client wants maximum net pay. They want to set (Suppose 2 lakhs) a limit and when running payroll system gives a error.
or
Master data maintain time gives error wagetype wise.
Please suggest me.
Thanks & Regards,
Neelesh

Hi,
I think you need to implement the the following BAdi as per your requirement, I understood your minimum netpay as per employee sub group wise ( If i Am wrong correct me)
Normally in indain senarios eighter one rupee or some percentage only if not suited you need to implement BAdi. (SAP recomended)
1. HR_IN_MINIMUM_NET Default implementation for Minimum take home pay 40

How to pay the employees their arrears

my company is using ukhrms. 11.5.10.2
i want the system to compute the earnings and deductions for an assignment set that i have already created. payment of the arrears is as of begining of the financial year i.e. january 2009.
note the arrears that i want to compute are for 6 month starting from jan.
how can i achieve this?
all your comments are welcomed!

Use Retropay :-)

Employee Gross Pay Data Source

Hi,
I am fairly new to HR Reporting area in BW.
Is there any business content data source that provides Employee Gross Pay (Weekly & Monthly) ...my requirement is to drilldown gross pay by employee and by Pay month.
Thanks in advance

Hi,
That will be
0EMPLOYEE_ATTR
and
0HR_PA_OS_1
Udo

Rule for Adoption Pay in UK payroll

Hi All,
Need your help to solve an issue.
My Business Scenario: Need to calculate an adoption pay for employee based on Average Weekly payment of 2 pay periods. I have to pay adoption pay for an employee only for 6 weeks. The date from which it has to be start will be in P0088.
Consider the scenario:
01.2014 - 01.01.2014 - 29.01.2014
02.2014 - 30.01.2014 - 18.02.2014
If the adoption pay start date is mentioned in P0088 is 01.01.2014 then it should give the pay based on the avg. weekly salary for 4 weeks on 1st pay period and for the next period it should provide it only for 2 weeks.
For Example:
Avg weekly pay for 4 weeks (based on 2 pay periods): 2250
I came to know that using PCR I can do it. My query is how to write PCR based on date (P0088) and check how many weeks it covered in before period (4 weeks in my first period) and in current period (2 weeks in my 2nd period) .
Note: I am newbie to payroll functional part, it will be helpful if you mention in detail to achieve the scenario. Let me know if you any input.
With Regards,
Giriesh M

Hi Giriesh,
unless your customer is doing some really wierd and possible illegal things, writing your own PCRs from scratch is almost certainly leading you into a dead end.
You should build onto the standard functionality of PY-GB for absence schemes. It may even work out of the box with standard config. If you are not familiar with UK absence schemes, it's paramount you familiarise yourself with that topic before taking it any further.
Apologies, if I misunderstood your question, but it sounds to me as if you're trying to solve this without having considered standard absence scheme functionality.
kind regards
Sven

Multiple Currency Payroll Payments for one Employee

Hello,
We have a requirement of paying one employee in multiple currencies (i.e in Local currency and USD). This means that such employee has two bank accounts, i.e. Local Currency Account and USD Account.
The costing of payroll costs is done in the local currency. Does anyone know any standard procedure for this?
P.S we are using Global Legislation
Regards,
Salman

Hi Salman,
Have you tried this from Element Define window. There is functionality for Input and Output currency.
Hope it could meet your requirement.
Thanks
AshokP

Employee Payments thru Automatic Payment program

Dear All
For paying the employee through APP, .i.e Bank Transfer and Cheque, what are the setting I need to make from the FI side. I know that we need to click the allowed for personnel payments. But after doing it if i run it in F110, its saying "NO Accounts have been selected yet". What is that i need to as a FI consultant so that the APP selects the employees in F110.
Appreciate your quick response.
Regards
Rajaram

Hi ram,
at OBVCU, select your company code,select Bank Accounts in lefthand side and specifiy your Housebank|Payment Method|Currency|Bank Clearing A/c|GL Account NO.
Satish

Payment to a terminated employee

Is there a way we can pay a employee a certain wage (not basic pay) after he terminates? I understand that we can create an IT267 and run an offcycle as of a check date.
Other than that, are there any other options? can this be done in regular payroll over several periods?
Thanks,
Lana.

Hi,
Try following.
Give payment to this employee through Infotype IT0015. If your wage type is permissible on IT0015. Then go and change the IT0003 (payroll status) for the field "Run payroll up to date". Make sure this date is current Payroll period end date which you would be running the payroll for. Try and run the payroll now. I think you should be able to get the results.
Basically you have to take care of IT0003 before running the payroll.
Let me know if this worked.

How to handle late hired employees

We are using ukhrms.
i have a situation where by employees in our company are delayed by HR to do the entries because of the delay in the employee's medical report from the clinic.
Following is the case:
employee joins on calendar month Jan 2010 and he is not processed in the monthly payroll for JAN 2010. When Calendar month Feb 2010 comes, the payroll user opens the pay period for JAN 2010 and the system is date tracked back to 01-jan-2010 and the employee(s) is/are created in the system. The reason of doing this is to avoid delay in the annual bonus to be paid to the employee by for example 1 month.
Q1) how can we pay such employee in February 2010?
Now, another concern is if we do as above mentioned then when the company issues Arrears to employees (i.e. every 6months or 8 months) from JAN 2010 to JUNE 2010
Q2) how will the system get the arrears for the Jan 2010 payroll that was not processed for the late hires that were done in calendar month FEB 2010 by date tracking to 01-JAN-2010?
Edited by: 594647 on Mar 3, 2010 1:04 PM

Follow the below steps.
1. Create an assignment status mapped to active assignment, payroll process to do not process -> lets say "my status".
2. Create the employee in January (the policy should be changed to create employee in the same month itself i.e. January in the current example) with Assignment status "my status".
3. Run Payroll for January. Since the assignment status has payroll process flagged to do not process, the employee is not paid in January.
4. In February, update employee's assignment status to Active Assignment from January (Date track to January).
5. Run Retropay by Element for Employee (Include Employee in assignment set) with start date = January and End Date = February. Arrears Element entries for January are created in February.
6. Run Payroll for February. Employee is paid with February and January arrears.

Report that display 'Net Pay' by Empl for current and previous period.

Hi,
We are looking for a SAP report that display 'Net Pay' by Employee for current and previous period in USA payroll module. If you know of any, pl let me know.
Thanks in advance,
Niranjan

Thanks Archana and Sikindar.
We knew about this report, however, it gives information one below the other if we run, say for 2 periods, but what we are looking for is something as shown in example below
Empl #      Empl # Name    Prev Pay period Net Pay        Current Pay period net pay.
123              XYZ                     $ 1200.00                                 $ 1200.00
256              ABC                    $ 2000.00                                $ 3000.00
We want to run for 2 periods at a time and get the results as above. That way, payroll dept can run this report and compare if we are paying too much in current pay, compared to previous pay. This is basically to avoid any typos when they create new pay records in infotype 0008.
Niranjan

Reimburse travel expense employee by check

Hi,
In our current client, the client wants to pay the employee the check for travel expenses and accounts.
As a process what is supposed to happen after the employee is paid by check.
1) Do we need to run the posting programs to post this information in to accounting and then to controlling?
Geerally when the employees are paid by check does this information need to be fed to accounting?
I hope so but please confirm.
2) And do we need to create vendor master records for employees to be able to run this postings to accounting?
3) When the positiing programs are run whhat effectively happen? Does it creating accounting documents (table BKPF)
I am a HCM consultant and having trouble understanding the integration poits with FI and hence a few a bascis questions.

1) Do we need to run the posting programs to post this information in to accounting and then to controlling?
When company pays to employees for thier trip exp , it must be posted, as it is an expense to the company
Geerally when the employees are paid by check does this information need to be fed to accounting?
I hope so but please confirm.
When employees are paid money, other than his salary , he will be treated as vendor, which will be done by FI team
2) And do we need to create vendor master records for employees to be able to run this postings to accounting?
When you debit expnese, (as TRav exp is an expense) you should credit the vendor
3) When the positiing programs are run whhat effectively happen? Does it creating accounting documents (table BKPF)
Yes it creates accounting entries, all debit - credit stuff

How to get top 10 employees in BEx Report

Hi all,
I am trying to get top 10 employees who have worked over 50 hrs of overtime in any pay period i choose in query.
How do i get it ??
right now my report gives me total of over 50hrs overtime in all chosen pay period employees list.
Any suggestions ??
Thank You,
KSmith

CAN SOMEONE PLEASE HELP ME SOLVE THIS PROBLEM ??
Hi all,
The problem I have is even though i tried condition for top 10 employees who worked more than 50 hrs.
My report right now shows all employees overtime under "OT" key figure for each pay period. --> I just want to show employees and overtime which is > 50 for each different pay period
The condition works only if i display just one pay period...and user dont want it that way. they want to get more than one pay period displayed on the report and should have list of employees who work more than 50 hrs over time. HOW DO I GET THAT ??
Also there is another key figure count meaning if out of those chosen pay periods there are 3 periods when an employee worked more than 50 hrs of over time then it should show "3". if there 2 pay periods when employee work more than 50 hrs count should display 2 ---> right now i am not able to get that also.
Please can some one suggest something ??
Thank You,
KSmith
Edited by: Keral Smith on Jul 25, 2008 2:49 PM
Edited by: Keral Smith on Jul 25, 2008 3:08 PM

Paying to Employee

Similar Messages

Maybe you are looking for