Payment DME file ditectly to SAP SEVER

hi!
I need to download the vendor payment DME file ditectly to SAP SEVER (Transction : F110) and I would not like to drop in the user micro or cd.
May you help-me?
thanks.

Hi,
The internal table data can be stored in the SAP directories which you can see in transaction AL11.
For example
DATA: file TYPE string VALUE `flights.dat`,
      wa   TYPE spfli.
FIELD-SYMBOLS TYPE x.
OPEN DATASET file FOR OUTPUT IN BINARY MODE.
SELECT *
       FROM spfli
       INTO wa.
ASSIGN wa TO CASTING.
TRANSFER TO file.
ENDSELECT.
CLOSE DATASET file.
Hope it helps you.
Regards
Manjari.

Similar Messages

Issue while uploading DME file generated from SAP using program RFFOAU_T

Hi Friends,
I ran f110 for our australian company code and able to generate DME file for making supplier payments successfully.
Encountered problem while uploading this file into our Bank Portal, upload is unsuccessful, status is showing as "Requires Repair u201C
I called the bank customer service and they told me that ,
We need to enter in our SAP the Bank ID ,
We have to enter there : NAB
Customer service told me that their bank is looking for Bank ID ,
But canu2019t see it , so the payment is not going through.
Can you please help me that where in SAP Bank ID should be entered, so as to upload this file successfully.
Thanks for your help.
Regards
Anil

Hi Anil,
While creating House Banks you can find Button called Data Medium Exchange. There is Bank Id field.
Try it once
reg
vishnu

F110S runs for a long time to produce DME file

A batch job schduled for "daily payment run + creation of DME files" using F110S (SAP ECC 6.0) . The batch is running in production for more than 20 hours to process payment against just single invoice.
The job runs in following 2 steps
1. SAPF110S which processes the payment clears FBL5N.
2. SAPFPAYM_SCHEDULE.
The second step seems a non-ending process.
The job variant has only 15 customers, only one invoice is to be processed against one account.
However in quality system the same job with more than 10,000 customer account range with more than 10 invoices runs just in few minutes.
Any idea or suggestion why it's taking so long in production? Any missing configuration in production server?

It's not performance issue. When we run F110S or F110 in production with individual login id, program runs the way it should and finishes in reasonable time (for example the scenario I described in question finsihes in few seconds).
The problem occurs only when production batch job runs with job scheduler; program seems looping somewhere for infinite time - to be particular it keeps reading the table TPRI_DEF which has just few records (must be reading this table inside a loop).

RFUMSV00 (Tax report) wrong generation of DME file in Unicode system

Hello gurus,
I've a problem running the program RFUMSV00 (Advance Return for Tax on Sales/Purchases) transaction S_ALR_87012357 when "Create DME file" check box is selected and a format tree and a file name are specified.
On 4.7 it was working properly but now on ECC6.0, that is unicode compliant, does not work correctly because each char of each field on the downloaded table into Unix directory has preceeded by an hash (#).
So 1234 becomes #1#2#3#4...
The problem seems to be related to codepages and I found in debug that the RFUMSV00 program calls from the include I_RFUMS_DME_FORMS the following routine at line 119: PERFORM write_file_to_system USING lt_dme_file.
This form contains a call to the following function:
    CALL FUNCTION 'FI_PAYM_FILE_OPEN'
              EXPORTING
              i_temse_name = par_tems
              i_file_name = l_file_name.
without specifying the codepage as further parameter so the function open the dataset for output in binary mode (and here the problem) because i_codepage is initial
Pls see below.
    IF i_codepage IS INITIAL.
      OPEN DATASET i_file_name FOR OUTPUT   "Open File to write
                               IN BINARY MODE.
    ELSEIF i_codepage = '4110' AND
           cl_abap_char_utilities=>charsize > 1. " UTF-8 and Unicode
      OPEN DATASET i_file_name IN TEXT MODE FOR OUTPUT
                                       ENCODING DEFAULT.
    ELSEIF i_codepage = '4102' OR i_codepage = '4103' OR i_codepage = '4110'.
      OPEN DATASET i_file_name FOR OUTPUT
                               IN BINARY MODE.
    ELSE.
      OPEN DATASET i_file_name FOR OUTPUT   "Open File to write
                               IN LEGACY BINARY MODE
                               CODE PAGE i_codepage
                               IGNORING CONVERSION ERRORS.
Putting '4110' on i_codepage all is working magically perfect.
Does anybody know where set the code page (4110) or how to solve this problem ?
Thanks a lot in advance & best regards
Tony

Hello Rob,
thanks for your reply.
Yes I did a check of the OSS notes and I found that OSS 1365764 (Pls see below) describes exactly the problem I have but it is relevant only for payments and DME files created with this purpose.
Also the DCP parameter (that has to be specified at user level) is only relevant for RFFO* programs.
Note 1365764 - Codepage of DME file
https://service.sap.com/sap/support/notes/1365764
Also the two following notes
Note 911190 - PMW: Entering the code page when writing and downloading
https://service.sap.com/sap/support/notes/911190
Note 899205 - RFUMSV00: DMEE format tree with additional parameters
https://service.sap.com/sap/support/notes/899205
So to be honest I do not really know how to look at to solve the issue.
Thanks again for your reply & best regards
Tony
Edited by: Antonio Lanza on Nov 9, 2010 9:33 AM

Generation of DME file in FI_CO

Hi all,
I have a requirement to generate dme file for singapore with three record sturture namely - header record, detail record, trailer record. can anyone please tell me what is the standard program which generates such kind of file format.
Please help. Its urgent.
Edited by: srinivas kodukula on Aug 7, 2008 5:12 PM

Hello Rob,
thanks for your reply.
Yes I did a check of the OSS notes and I found that OSS 1365764 (Pls see below) describes exactly the problem I have but it is relevant only for payments and DME files created with this purpose.
Also the DCP parameter (that has to be specified at user level) is only relevant for RFFO* programs.
Note 1365764 - Codepage of DME file
https://service.sap.com/sap/support/notes/1365764
Also the two following notes
Note 911190 - PMW: Entering the code page when writing and downloading
https://service.sap.com/sap/support/notes/911190
Note 899205 - RFUMSV00: DMEE format tree with additional parameters
https://service.sap.com/sap/support/notes/899205
So to be honest I do not really know how to look at to solve the issue.
Thanks again for your reply & best regards
Tony
Edited by: Antonio Lanza on Nov 9, 2010 9:33 AM

SAP Payment Medium File for China

Hi Guys,
Could you advise on this please?
We need to create a payment file from SAP for sending to Bank of America in China.
The payment file needs to be in the following format:
PAYMENT","HEADER","07192005","MTI-MTIW0000","0009"
"PAYMENT","FXW","31","07252005","DEBIT","9976.37","CNY","国家高新
"PAYMENT","TRAILER",
Can you advise please
(1) which payment medium program do you advise to use in order to generate this DME file for China? Is it payment program RFFOM100?
(2) are there other payment programs within SAP for China that can handle different file formats specified by the banking partner? Reading the RFFOM100 documentation, the format above does not seem to be accomodated Bank RFFOM100:
Thanks for any guidance you can offer here.
Michael

Refer OSS Note 164888. You will find an answer to your question.

DME file in XML format in SAP 4.6C

Hi Experts,
For a Belgium client, I have a requirement to generate DME file in XML format for payments made to foreign and domestic vendors. I want to know the following,
1. Can DME file be generated in XML format using classic payment medium programs RFFOBE_E and RFFOBE_I.
2. If not why and what are the other options.
3. I also came to know that there is an options of using Payment medium workbench - through XML format trees BE_BEPDTA and BE_PIBDTA. But since we are in 4.6C, i am not able to create a payment format. Is there any support package or patch that is required.
4. I tried for SEPA_CT - again a XML format tree but was not very successful as that too was not available in SAP 4.6C. Is there any way that I can get this done in 4.6C - any support packages or patches available?
Thanks

Hi Kaylan,
could you please share that documentation with me too.
Thanks, Regards,
Alex Cardona

F110 Payment run - problem with DME file

We are using a custom Payment medium Program for Colombia to generate a DME file. The problem is that after scheduling the Payment Run the user is trying to download the DME File into a folder on the PC to send to the bank. When the user clicks on the export file button the message says:
'There is no source for the data record'.
We tested this thoroughly in the Test environment and the user was able to download the file. But for some strange reason this is not happening in our production. The user has proper authorizations w.r.t F110 and FDTA transaction codes.
I am not sure if this would be useful but when the user gets this message the SU53 screenshot shows Authorization failure to the object P_ABAP HR: Reporting. The Object class is HR Human Resources and the ABAP Program name is SAPMFDTA.
I am not able to understand why we get this because my client does not use SAP HR module.
Please let me know how to resolve this.
Regards,
Raj/

Hello,
Please check the variant in OBPM4. To down load the file to PC, you special authorization and it is not rcommended as these files are very critical and changing to PC would allow the user to modify them.
These files are being downloaded to application servers. You can see the folders in AL11.
In OBPM1, you have enabled "DME file output".
Hope this solves your problem.
Regards,
Ravi

DME file issue: Payment run for Customers

Hi Gurus,
Please help me in the following problem.
I have done the configurations for automatic collection/refund using F110 for customers in our ECC 6 system. Iu2019m having a requirement as below.
1. Singular payments to be made for each customer transaction.  Have done that by checking u2018Singular paymentsu2019 check box in customer master data.
2. All payments should be collected in DME file at customer level even though the payments are multiple.  have done that by customizing the RFFOGB_T program.
3. Configurations are done for incoming (Receivables) and outgoing payments (refunds) in SAP and working fine.
Now the problem is, there is a requirement to net-off the monetary value of a customer in DME file i.e. if a customer having debits and credits then we need to net off the amounts and check whether itu2019s an incoming or outgoing payment to that customer. I have done the code changes for this requirement as well and it is working perfectly fine, however DME file produces 2 CONTRA lines one as debit to bank account and another as Credit to bank account (provided I have 2 customers in a run where one customer ends up in net debit balance, and another customer ends up with net credit balance). Our Bank doesn't accept more than one CONTRA in a single DME file.
Example scenario:
Customer1
Booking 1 -> 400 (Dr) & 200 (Cr)
Booking 2 -> 300 (Dr) & 100 (Cr)
Customer2
Booking 3 -> 100 (Dr) & 300 (Cr)
Currently If I run the payment run by having both incoming and outgoing payment methods, then my DME file will result as below
Customer 1 -> Dr 400
Customer 2 -> Cr 200
Bank account -> Cr 200
However our bank is not accepting the above DME since there are debits as well as credit data records in the same file.
Currently we are going with 2 separate payment runs, one for incoming and another for outgoing by this I could able to produce 2 DME files as below for the above customer bookings.
Payment run 1:
DME 1:
Customer 1 -> Dr 700
Customer 2 -> Dr 100
Bank account -> Cr 800
Payment run 2:
DME 2:
Customer 1 -> Cr 300
Customer 2 -> Cr 300
Bank account -> Dr 600
Both files are being accepted by Bank, however business is not agreeing this since for every customer transaction bank charges client. (There will be 2 transaction for same customer in the same day)
Anybody encountered the same problem? I need some suggestion on how to produce 2 DME files in a single payment run, one having only net debit balance customers and another having only net credit balance customers, so that on a particular payment run a customer will have only one transaction going into bank either Credit or Debit. Basically I need to produce DME files as below for the above customer bookings
Payment Run 1:
DME 1:
Customer 1 -> Dr 400
Bank account -> Cr 400
DME 2:
Customer 2 -> Cr 200
Bank account -> Dr 200
Please help.

Client has a difft scenario.
They pay to the customers for warranty and incentives. 2 ways to pay to the customer: generating payment run F110 within AR and the other being F110 from AP where all the customer open items are closed and sent to AP for payment using a custom program.
The problem with this is they have two interfaces each from AP and AR and aslo a custom program.
Now, solution is to pay all customers thru AP by setting each customer as vendor so that all the open items are picked in the payment run.
Next solution is to have single interface but paymentruns seperately from AR and AP. Both would send the files differently to Bank when paymnt run executed. Concern here is when both Ar and AP send files will the interface be able to handle it like 2 difft files or should there be any consolidation kind of thing.
Another question is, do we have to set up all customers as vendors in order to pay to the customer thru AP. There is customer accounts field where range of customer accounts can be added. Just by adding customer accounts, does it pick up the items for payment.
Please reply.
Satya

Italy Payment Program for DME File

HI ,
italy uses program RFFOIT_B, for Payment method 'B', to get the DME file to export to the local bank.
The issue is according to the new CBI format, I dont have the SIA code and the IBAN details in the DME file.
Where do i give the SIA code in SAP, so it comes up in the File
IBAN details are given, but in Record 10 data structure, it is giving the bank key twice to fill in the 22 chars.
We are curently using 4.6c
Has any one had or having the same issue,
any info relavant would be very helpful,
i am on mail at saawan.k at gmail.com.
Any help i really appreciate.
regards
saawan

Hi,
To answer your question:
1. The SIA code is stored in the additional data for the company code. Go into IMG -->Enter Global parameters under Financial accounting global settings under Financial accounting. In the global parameters screen there is a button for Additional data; click on that. In the field "RB: Code", enter the SIA code. Save the data. Now display table T001Z with PARTY field = SAP006 and the italy company code; you should be able to see your SIA code there.
2. For IBAN and correction of the duplication of the bank key, check the following notes:
a. [1120583 RFFOIT_B:For Record 10, Position 70-79 should be blank |https://service.sap.com/sap/support/notes/1120583]
b. [1121113 RFFOIT_B:Add record 16 and 17 to manage IBAN code |https://service.sap.com/sap/support/notes/1121113]
Cheers.

Automatic Payment using DME file in India

Hello Gurus,
May i know the configuration for DME file generation for Out going Payments to Vendors in India.
Cheers!
SK

Hello
When configuring the payment methods for the country (transaction OBVCU), choose the payment medium program as RFFOM100.
From se38, pls read the documentation for the program, which will give you the various options & the required config too.
You would also need to configure the instructions keys as required.
To generate the DME file, you have to run the automatic payment program with this payment method.
After the payments have been successfully posted, you can go to DME administration and with the help of dme manager download files on your PC.
SAP has determined that the standard print programs for automatic payments will no longer be supported, and will be replaced by transfer structures created by a tool called the DME Engine.
This tool enables the business to create DME output files without ABAP development, and can be attached to a print program and form for the creation of Payment Advices.
Outside of the DME Engine (DMEE), the majority of the configuration takes place within the following IMG menu path:
IMG Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Media Formats from Payment Medium Workbench
Config
Assign Selection Variants
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Medium Formats from Payment Medium Workbench -> Create / Assign Selection Variants or transaction
OBPM4..select your format that you are using
Check in FBZP config that all is linked!
Although this is bitty but you need to work through it!
Start with FBZP, create all there than go to DMEE either to create your own format or use the standard ones.. than go to the menu path above and work through from create to assign...
Reg
Suresh

Mapping all one vendor Payments to that Vendor in DME file.... ???

Hi Gurus
I am not able to Map all one vendor Payments to that Vendor in DME file. The DME file takes each individual line item (invoice) but incorrectly with the total amount of vendor payment - not amount of each invoice. We want to pay a total for each supplier and not per individual invoice.
Please let me know.. How to set up these settings in payment method ?
Thanks
Meenakshi.N

Hi,
You can influence if open positions to one vendor are paid together or separately are controlled by this:
- FD02: vendor master
box: Individual pmnt -> please read F1-Help
box: Grouping key that can be entered in the document -> F1-Help
- FBZP: Payment method / comp code
Single payment for marked item: marked?
- FBZP: All Company Codes
Separate payment per business area: marked?
Beside that please read note 305414. Please be aware that positions can be only regulated together if there is no difference in the entries of the important fields that are contained in the structure ZHLG1.
Hope that helps to understand to logic how the payment run groups the positions for posting.
Best regards,
Jeno

Automatic Payment Run - Problem with downloading DME file

Hi,
My client recently went live with the Automatic Payment run. But when trying to download ( or export) the DME file he is unable to do so. The message says like "There is no source data for this data record".
Please help.
Regards,
Raj/

Hello,
You have to give the destination path where the file needs to be saved in transaction code OBPM4.
Hope you must have maintained proper variant for your Payment Medium Format.
Unless, you maintain these values, the file will not be generated at the destination.
Thanks,
Ravi

Payment run for DME file- error

I have successfully executed payment run. the varaint is defined for DME file. when i execute the print program i get error
'Payment run/group (20110701 DME2) locked by user 10609576'

Hi,
The user "10609576" is also doing some activity for this payment run id.DME2 Dated: 20110701.
You can generate the DME after that user has come out of this payment run.
Regards,
Kiron Kumar T.

F110 Issue:there is diff between of 1000usd in F110 payment list & dme file

H i experts
F110 Issue: there is difference between of 1000 usd in F110 payment list and Dme file.
please let me know reason
regards
sachin

Check the amount field in the DME as to which value it is picking. I think it is mapped incorrectly.
Ravi.

Payment DME file ditectly to SAP SEVER

Similar Messages

Maybe you are looking for