Payment terms, delivery terms not to be editable, once PO is released

Hi experts,
Our requirement is that once Purchase Order is released thru tcode Me29n .
The payment terms & delivery terms mentioned in the purchase order should not be edited.
Please guide me. Suggestions / Rewards will be highly appreciated.
Regards,
( Rajneesh Gulati )

Hi,
To achieve this requirement the release indicator for the PO release strategy should be set as 1.
The path to change the release indicator is:
SPRO->Materials ManagementPurchasingPurchase Order-Release Procedure for Purchase order---Define Release Procedure for Purchase Orders--Release indicator
hope it will help.
Regards,
Manish

Similar Messages

IPhoto is not allowing the edited versions to be exported.

Apparently, there is a long-standing issue with iPhoto not keeping the edits once photos are exported. I usually don't test my exports to see if the edited version was exported correctly. I just assume Apple products are working as they should. But I tested today and discovered what so many of you have discovered - iPhoto is not allowing the edited versions to be exported. I can't see that Apple has addressed this. What is going on here? Side Note: I am also frustrated that Apple took iDVD out of their line-up of available preloaded software. Getting more disappointed with Apple all the time.
Has someone figured out how to easily get around this obvious flaw?
Could it have something to do with the preference of importing the photos into the iPhoto Library. Should I uncheck this in the preferences menu? I really only want to use iPhoto for quick renaming of files and simple editing purposes and then export them to my own method of organizing and back-up. I use Photoshop for more extensive editing. Would really like to continue using a simple method, but so far, this simple method is more work than is necessary for Apple's software. Come on guys!!!!!

1 - there is NO " long-standing issue with iPhoto not keeping the edits once photos are exported." If you are doing things correctly it is trivial to export edited versions (or originals if you prefer)
2 - it is strongly recommended that you do not uncheck the preference to copy imported items to the iPhoto library - unchecking this preference makes operation much more difficult and makes upgrading hardware or moving to a new system almost impossible
3 - you are doing something wrong - since you do not tell us what you are doing - or even what version of iPhoto you have - it is impossible to u hfigure out what you are doing wrong
exactly how are you exporting photos? Exactly how are you using PhotoShop for editing?
The proper way to eidt using PS is to set PS as the external editor, edit in PS and save (not save as) to return the edited version correctly to iPhoto? The best way to export is to select the photo(s) in iPhoto and export (file menu ==> export) - the default is you get the current (edited) version
LN

Payment terms and delivery terms

Dear SAP Gurus,
How to create new payment terms and delivery terms in Materials Management module and what are the settings required/integration with FICO mudule.Please guide me.
Thanks and regards
Mahesh

Dear,
Payment terms: (In MM side attached with Vendor Master)
The payment terms represent the typical agreements you have with your customers and vendors. Therefore, you do not have to define this information from scratch for each customer and vendor.
When a purchasing or sales document is entered for a vendor or customer, SAP Business One automatically copies the information on the payment period, price list, and total discount in the document. This information is used, to calculate the prices for the items, the due date of an invoice, or the total discount allowed etc.
You can also change the payment term data manually in the transaction itself if a special agreement was made for that transaction. In addition, the information on the credit limit is copied from the payment term to the customer master record and then to the sales document, and can be used for a credit check.
For the complete process of payment terms visit: http://help.sap.com/saphelp_sbo2004a/helpdata/en/c7/583e38404780498ef3d08b1fa076cb/content.htm
Delivery terms : In the MM prospective delivery terms generally indicates the status of material delivery. For ex. Goods Must be packed well for protection / Proper handling instructions must be labelled on each pack / Net weight & Gross weight should be mentioned on pack / International Maritime Dangerous goods code should be printed on pack in case of Dangerous goods transported by sea / Like wise similar instructions for Air transport for Dangerous goods / All technical names should be printed and attached on cover of pack / the packs must be perfectly packed with water protection and palletised like wise the terms of delivery we set to the suppliers of materials.
Regards,
Syed Hussain.

Print document type Q02( technical delivery terms) with Purchase Order

Hi all
1) I have activated the QM procurement for a certain material and I have assigned the control key that makes mandatory the technical delivery terms on the material master (standard control key 0002).
2) I have created a Document Info Record Q02 to hold the Technical Delivery Terms assigning a PDF file. Document is released.
3) I have assigned the DIR to the material master (object link in the DIR).
I would like to know how to print the this DIR with Purchase Order. I am testing this scenario in IDES system and the form does not get printed.
Could anyone please advice how to get the PDF file printed with the purchase order?
Thank you

Hi Sappmqm,
There is no internal way, you would have to create an ABAP program to handle this function, where it would search the material record to pull the DIRs linked and then open them on user's screen for printing.
Additional SAP add-ons are available as 3rd party apps, can click my name and contact me for more detail if you like.
Good luck.

Quality agrement/ Tech-delivery terms

Hi all,
I have assigned quality agrement and tech delivery terms both to material/vendor. If i am sending po to vendor then
1)weather the attachment which i have made in quality agrement and tech delivery term document will also get attached with PO.
Because when i am creating PO i am unable to see any attachement witth it.
and also the long text which i have maintained in the both the document is not getting displayed in the print priveiw.
ASD

Hi ASD,
You can't call the entire attachment in PO.
But through ABAP program in PO print you can map Tech Name Rev no and QA Agreement Name, Rev No etc.
That detail store in the Material related and Q Info record Table.
Regards,
Babu

Office 2013 and SharePoint 2013 server properties - The required term set is not available.

Hi,
After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
There is a two-way trust btw domains.
SPNs are done for AppPools.
AppPool accounts have delegations and are set to impersonate with GPO.
SharePoint Web Application is on kerberos authentication.
There is no difference when sites are using user or resource domain AppPool accounts.
The WFE and SQL Server have computer delegations.
Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
Last things on IIS log are:
2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
What I missed.
Br,
-timo-

Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

Dimension 1 Cost centre field is not able to edit in Incoming payment for Down payment Request

Hi Exports,
I am facing an issue on selecting Cost centres in Incoming payment screen.
Issue: While I am booking the payment entry for Down payment request, I am not able to select first Dimension cost centre in Incoming payment rows for down payment request document, the Second dimension is able to select and update. the field is in non-editable mode (only on specific document row)
Setup:
1. Two Dimension are enabled
2. In Separate Columns - Both Cost Centres are in separate column
The above issue is only for Down payment request, for other documents (Invoice) I am able to select and update cost centre
Please find below snap shot for reference
Kindly check and let me know the solution
Regards,
Kiran

Hi Gordon,
Thanks for your reply.
Yes agree, The Down Payment request is not a financial document but the Cost centres are able to select in Down payment request rows, no issue at all in this case.
In Incoming payment screen it is necessary to select Cost centres because it has financial implication using down payment request with related to currency difference or Bank charges (both are Expense accounts) and DR assignment is mandatory in this case.
And you have to notice one thing in above issue, I am able to select second dimension cost centre and it is allowing to edit and update the cost centre on respective row. Only issue is specific cell (dimension 1 cost centre) is not able to edit.
Even I am not able to process payment entry without selection of Cost Centre on first dimension, the system is blocking and displaying the error message "DR Assignment is mandatory on Dimension 1 for specific account"
Looks like bug, please clarify
SBO version: 9.0 PL 11
Regards,
Kiran

Payment terms and Terms of Payment

Hi,
Can any one clear me, is there any difference between Payment terms and Terms of Payment? If yes please give me the what are those.
Thanks in Advance
Prabhakar
Moderator: The same as between 'Press F1 on the field' and 'When on the field, press F1'

No Difference in SAP.
"Payment Term" is the short text and "Terms of Payment" is the long text of this field.
Regards,
SDNer

Not able to edit delivery doc

hi all,
once order has been saved, in delivery VL01N if i clicked picking tab, it was showing 0(zero) i am not able to edit. it is in grey color.
i tried 3 times of deleting PGI and delivery documents too, but still it is showing grey scale.
let me know the solutions for this problem.

Hi
It looks like warehouse management is active in your system hence the picking tab is greyed out
If warehouse management is active you cant do manual picking
After your delivery gets saved put the delivery in change mode go to menu bar click subsequent functions then click create transfer order and it will take you to T.O creation screen
and there you give those details like plant etc and then enter it will take you to the details screen and save it and then do gi
T code T.O creation is LT03
Regards
Raja

Find out whether a delivery note is manually edited.

Hi,
Is there any way of finding out whether a delivery note was manually edited after its creation in SAP ?

Hi,
Besides, you can check in VL02N for ur doc.no on menu option Environment- Changes.
Reg,
JJ

Quality agreement and technical delivery term

what is quality agreement and technical delivery term?

Hi Rupali,
Quality aggrement document type is used in Quality Info Record.If you maintain control key regarding Quality Aggrement you must maintain the Quality aggrement otherwise PO or GR will be blocked.
Technical dele term are maintained in Material master-->additional data -->documents.
if you select the control key which has reference of Technical dele term you have to maintain this in MM otherwise PO or GR will be blocked.
Q01 Q-Agreement
Q02 DelivTerms

Itunes is asking that I edit payment info, but will not accept any changes to allow me to purchase music? I have changed cards, reentered information, uninstalled and re-installed Itunes. Nothing is working, what do I need to do?

Itunes is asking that I edit payment info, but will not accept any changes to allow me to purchase music? I have changed cards, reentered information, uninstalled and re-installed Itunes. Nothing is working, what do I need to do?

See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Delivery Terms in AR Salesorder

Hi,
is there a way to handle delivery terms in SBO??
I want to get an alert when closing/entering salesorder and its under lets say 500 euros??
Otherwise customer who orders has to pay shipmentcosts.
thanks
Mark

That is a simple user query alert. Try this to start:
SELECT DISTINCT 'TRUE' FROM DBO.ORDR T0 WHERE T0.DocTotal < 500 AND T0.DocNum = $[$8.0.0\]
Thanks,
Gordon

Payment block code is not displayed when an alternative account is used

Hi,
we have defined an alternative account for vendors.
When posting an invoice directly in FI, the payment block field (as well as the other payment terms fields) is not displayed in the Payment tab, if the alternative account code is selected. If the alternative account is cleared - in the same document - the payment terms fields are again displayed. Changing again the alternative account field (from blank to the relevant code) have the effect of payment terms masking.
The same behavior happens during the modification of a document.
The result is that - as the invoices are posted with the payment block field posted as default, it is not possible to release those documents.
Can you give me any hint?
Thanks,
Massimo

Hi
It may be a problem with Posting Keys you are using.
Go to OB41
Double click on posting key used for payment or which ever your action is for
Click on the Field status on the top
Double click on Payment Transactions
And select optional or required for the fields which you want to see
OR
Go to TCode OBC4
Select the required company code's Field status variant (whole line should be selected)
Double click on Field status groups
Double click on Reconciliation accounts (A/Payable or A/Receivable)
Double click on Payment Transactions
And select optional or required for the fields which you want to see
Hope its useful.
Mostly first solution should work for you
Regards
Jyotsna

Wont let me update or download free apps says i need payment verification but im not buying anything

wont let me update or download free apps says i need payment verification but im not buying anything

Howdy Irishinked,
Thanks for using the Apple Support Communities.
If you're being prompted that your payment information needs to be veriefied, then there is some aspect of your payment type which is being denied by your financial institution. I'd like you to please follow the steps below to verify your information.
Open iTunes. If you are signed in to iTunes, skip to step 4.
Note: Verify that you are signed in to the correct iTunes account. If you are unsure which account you're signed into, choose Store > Sign Out and proceed to step 2.
Choose Store > Sign In.
Enter your account name and password, then click the Sign In button.
Choose Store > View My Account.
Click the Edit Payment Information button.
In the Payment Method section, choose None.
Click the Done button at the bottom of the page.
Click the Edit Payment Information button again.
Enter your billing address exactly as it appears on your credit card statement.
Select your credit card type in the Payment Method section.
Enter your credit card information, your card's security code, and the expiration date.
Click the Done button at the bottom of the page.
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
iTunes Store: My credit card's security code or zip code does not match my bank's records - Apple Support
Have a good one,
Alex H.

Payment terms, delivery terms not to be editable, once PO is released

Similar Messages

Maybe you are looking for