Payroll cost codes update i r 12 Urgent

HI all
HRMS has upgraded to 12 .Financials was not implemented.Now they are implementing .When it comes to cost codes how do we update the cost codes !! Cause they have created cost codes and linked to elements at the link lelvel.But they are not using the Financial .i have no clue why they have created this !! But now financials are being implemented and now cost codes has to updated cause they are restrucring the Chart of Account values. How we can update the cost codes !!
Does oracle has API to update the cost codes once i hasbeen configured .Any suggestions on this Greatly Appreciated.

DEar Kumar
AS far as i understand there are no APIS for this where as in general practice we make use of the same valuesets which finance has used but where as in u'r case as the HRMs is implemented first now the Finance guys have to see the Cost Codes which have been defined in the HRMS and is even that is not possible there is nothing u can do rather change the valuesets of the COST Allocation FF.
Hope this information is useful
Regards
Srujana

Similar Messages

Configuring Cost Code along with Payroll elements in Timekeeper time entry

Hi,
I am trying to configure cost code as a separate entry along with payroll elements in timekeeper time entry screen.
Can any one help me in completing the task.
Regards
BK

I have configured the time keeper time entry scree of my own.

Cost not update

Dear All,
I carried out the Code CK24 for updating the cost.
System has given the information message: 1 material ,cost estimates were updated successfully.
But MM02 no cost is updated.
Please guide me to overcome this issue.
Thanks in advance.
Vijay Mankar

Dear Mr.Pradeep,
I carried out the suggested step for the same.
But again the system gave message 0 material,0 cost updeted.
In CK11N error message like material T_234
1000 CK 694 No structure could be determined for internal activity SETUP (S1000) 2,
I clicked the error it gives
Check the master data for activity type SETUP of cost center S1000. It is possible that no activity price calculation has been carried out for the cost center.
Please do the needful
Rgds,
Vijay Mankar

Reversal of Cost Price Update and Price Change MR21

Dear SAP experts
Recently (on 1st of this month) i did cost price update for all my FIG items. Later i realized that some of FG items cost price was not accurate. So i want to delete cost price of those items and update price by using T code MR 21
When i try to cancel these items cost price by using T code CKR1, i am getting error message that particular material current or future standard price is avialable and i am unable to move further
Please guide how to delete current cost price of these items and update cost price by using MR21. Please note these items does not have any BOM and basically are contract manufacturing items
Thanks in advance

Hi Vedsai
When you use CKR1, it does not give error.. It just gives a warning message
Enter your Plant / Mat in CKr1 and select "Current cost estimate" or "Future Cost Estimate" as the case may be
If any warning comes, ignore it and press enter.... It should reverse the cost estimate
Now update from MR21 or preferably use CK11N again
Note: If at all it gives any error in CKR1, check in T code OPR4_CK if this msg can be converted into warning message
Regards
Ajay M

PO to accept multiple GL codes and cost codes

PO to accept multiple GL codes and cost codes. Since the system POs are not accepting more than one GL code and Cost code, this functionality is not being used for some of the service providers like Car Hire, Air ticket vendors, Stationery vendors, Utility vendors.
Is there anything to releated to field selection ?
is there anyway to upload the excel file in case if I have more than 1 G/L and cost center during PO creation
Thanks in advance

HI
Yes the setting will let you use multiple account assignments.
If you need to upload alot of PO's in this way then the best way is to use the BAPI - BAPI_PO_CREATE1.
This will help you in craeting any number of line items witha nay number of account assignments.
LSMW and BDC will not be able to control the table structures being used.
Please take help of ABAPEer in bulding the program using the BAPI.
Thanks & Regards
kishore

Query for Cost Code in oracle HRMS

Hello Exports,
i am new in oacle hrms,
So Can you please tell how to fetch cost code in oracle hrms r12 ( i need sql query for cost code )
Thanks

try the following (assignment costing as at today):
select ppx.full_name
,ppx.employee_number
,pax.assignment_number
,pax.primary_flag
,pcax.proportion
,pcak.segment1
,pcak.segment2
,pcak.segment3
,pcak.segment4
from per_assignments_x pax
,per_people_x ppx
,pay_cost_allocations_x pcax
,pay_cost_allocation_keyflex pcak
where ppx.person_id = pax.person_id
and pax.assignment_id = pcax.assignment_id
and pcak.cost_allocation_keyflex_id = pcax.cost_allocation_keyflex_id

Where are Cost Codes attached to a Project Number in Financials?

Where are Cost Codes attached to a Project Number in Financials?
Don't know where to start looking in the documentation..
I need to know where I can add GL Cost Codes to a particular Project number for our testing of i-Expenses.
anybody know?
many thanks,
Steven

Well, not sure what you mean by "cost codes". Normally when I see that wording I think of work breakdowns within a project. I don't think of cost codes as being general ledger numbers. But maybe you are meaning to say general ledger number? I see "Project Number" though, which makes me think you are talking about project accounting. You set up your projects in project accounting and create what Oracle calls Tasks (I like to them of them as cost codes) that you can assign to your projects. So this would all be in Project Accounting. You may want to download the various user guides for Oracle Projects to start learning about this application. You must be running project accounting, correct? So maybe you need to find the person in your company who knows this application and start to get educated on it. There is a separate forum for Projects where this may be a better place to ask this question. You may need to provide more detail on what you are trying to do if you are not involved with project accounting.
John Dickey

Limitting payroll t-code access

Hi expert,
I have a problem for restricting authorization for user for payroll t-code.
Apparently, some user is only allowed to ru offcycle payroll. So for example, for t-code "PC00_M34_CALC", user should only be able to run offcycle payroll so on the field declaring payroll type, they should only be able to enter 'A' -> offycle payroll.
I couldn't find a way to solve this through authorization object, so far my only found option is to manipulate the transaction selection screen.
I tried to use transaction SHD0 to manipulate the screen for the t-code, but apparently, transaction variant for t-code "PC00_M34_CALC" can not be made. Therefore I tried to play with variant by:
1. making the payroll type field is not inputable and automatically set 'A'
2. Protect the variant so it couldn't be changed by people except me
3.and then save the variant as customer variant "CUS" so that it could be transported.
After that I created a new T-code let's say Z'' where the default variant "CUS" is used for the t-code.
Problem arises as user has access to variant, they could create another variant, save it and then use it to open all access. Is there any way to limit either:
1. User has no access to variant creation
2. T-code couldn't be run except by a certain variant
Is there a way to solve my problem?
I'm open to any other possible solution to solve this problem.
Thanks in advance

Use authorization object S_PROGRAM.
For the field P_ACTION do not include 'VARIANT'

Limiting payroll t-code access

Hi expert,
I have a problem for restricting authorization for user for payroll t-code.
Apparently, some user is only allowed to run offcycle payroll. So for example, for t-code "PC00_M34_CALC", user should only be able to run offcycle payroll so on the field declaring payroll type, they should only be able to enter 'A' -> offycle payroll.
I couldn't find a way to solve this through authorization object, so far my only found option is to manipulate the transaction selection screen.
I tried to use transaction SHD0 to manipulate the screen for the t-code, but apparently, transaction variant for t-code "PC00_M34_CALC" can not be made. Therefore I tried to play with variant by:
1. making the payroll type field is not inputable and automatically set 'A'
2. Protect the variant so it couldn't be changed by people except me
3.and then save the variant as customer variant "CUS" so that it could be transported.
After that I created a new T-code let's say Z'' where the default variant "CUS" is used for the t-code.
Problem arises as user has access to variant, they could create another variant, save it and then use it to open all access. Is there any way to limit either:
1. User has no access to variant creation
2. T-code couldn't be run except by a certain variant
Is there a way to solve my problem?
I'm open to any other possible solution to solve this problem.
Thanks in advance

Did u checked the authorisation for this user as per the roles assigned to him in Tcode PFCG
http://saphruser.com/category/sap-hr-security/
Goto tcode
PFCG
1.Create a Role and click the Third Tab Authorizations once you create the role
click the change icon.
2.EDIT->Insert Authorization->selection criteria
search for human resources and add..
3.in the tree navigate to HR master Data -->authorization Level as R
M (read with entry helps)
R (read),
S (write locked record; unlock if the last person to change the record is not the current user),
E (write locked record),
D (change lock indicator),
W (write data records)
(all operations).
Note:Use /nAuth to change the menu tree for authorization in left hand side .
If you have IDES copy the profile HR940_RESTRICTED to Z profile and modify accordingly.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/27973b3ea3eb0fe10000000a114084/frameset.htm
Edited by: Sikindar on Apr 12, 2009 4:13 PM

Cost Code problem in Contract Manager 12.0

Has anyone encountered problem creating a Cost Code? When
we tried to create one with the "Planned to Commit" value
greater than 999, it simply refuse to work.
It
states that the field would not accept comma, but Contract
Manager automatically puts a comma in there when the value
is greater than 999.
It essentially makes
Contract Manager 12.0 useless to us. I am wondering if
Contract Manager 12.0 is a Beta release.

This was a bug in v12. Fixed in v12 SP2.

How much will it cost to update to OSX Mountain lion when it becomes available?

How much will it cost to update to OSX Mountain Lion when it becomes available?

Abisingar wrote:
How much will it cost to update to OSX Mountain Lion when it becomes available?
I read somewhere it will be $299.00 I also read somewhere that it will be .99c I also read somewhere.......etc. etc. For goodness sakes, wait till it is released! We know nothing more than you except that it will be the next OSX.
Pete

Standard cost price update

Can anybody tell me in details the logic behind the standard cost price update.
Regards
Amitava

Hi.
1.After did the cost estimate in ck11n . you need to update the cost for the current period. then only it will update in the MM02 under the costing view.
2.In the update the costing , 2 steps need to do
a. MARK the costing . give the period for which you need to mark the costing. and execute in ck24
if you done . the price will update for the future period . you can see this in the MM02 under costing view / std costs
It means thats you do calculate and mark the cost but it will show in the future period in MM02 COSTING VIEW. . but you are not release this cost as the current period cost. so you are still in the old period costing only.
b. RELEASE the costing in ck24 itself. If you release the costing , then the costing will be show in the current period in mm02.

Cost automaticall update when services entered manually in Maintenace order

Dear SAPIENTS,
How can I get Cost automatically update when services entered manually in Maintenace order. This services comes under agreement.
I have entered service agreement and now entering service number auomatically since i know the service number. Also i need that cost field should not come as editable.
Cost comes automatically when go for selection against agreement
Regards,
Kaushal Rai

hi
In the order whether you are able to see the plan cost in the COST TAB ,for the activity.
You have to confirm the activities or operation for the order in IW41,then only actual cost will be captured in the order.
if you complete the notification ,your operation will not confirm automatically
regards
thyagarajan

ITEM COST HISTORY에서MMT의 PRIOR COSTED HISTORY를 UPDATE해도 PRIOR QTY가 안 바뀔때

제품 : MFG_CST
작성날짜 : 2003-12-02
ITEM COST HISTORY에서
MMT의 PRIOR COSTED HISTORY를 UPDATE해도 PRIOR QTY가 안 바뀔때
=========================================================================
PURPOSE
item cost history에서
아무리 mmt의 prior costed history를 upda해도
prior qty가 안 바뀔때
Problem Description
item cost history에서 아무리 mmt의 prior costed history를 upda해도
prior qty가 안 바뀔때 CST_QUANTITY_LAYERS 테이블의 layer_quantity를
확인하십시오.
Workaround
N/A
Solution Description
cst_cg_cost_history_v 에서 해당 열을 조회하면
layer_id가 있읍니다. 그 layer_id를 갖고
CST_QUANTITY_LAYERS 테이블에서 layer_quantity를 조회해 보십시오.
select * from CST_QUANTITY_LAYERS
where layer_id = ???
그래서
CST_QUANTITY_LAYERS 테이블의 layer_quantity를
update하십시오.
Reference Documents
-------------------

How to transfer oracle payroll costing data to a legacy financial system

can some 1 help me with the select query that can pick the exact data of oracle payroll costing for the pay period and dump into my Financial system that is not an oracle product??

Condition 1.
ppa.action_type = 'C'
and ppa.payroll_id = :p_payroll_id
and ppa.EFFECTIVE_DATE between to_date('01-'||:PMON || '-'||:PYEAR,'dd-Mon-yyyy') and last_day(to_date('01-'||:PMON || '-'||:PYEAR,'dd-Mon-yyyy'))Above 3 conditions give the 'Costing' processes for the particular payroll that is processed for the given date range.
Condition 2
and ppa.PAYROLL_ACTION_ID = paa.PAYROLL_ACTION_IDthis condition restricts the assignment_action_id selected from pay_assignment_actions to the assignment_action_id for the payroll action selected by condition 1. ie result includes those assignments which are a result of costing process for the particular period.
Hope this has explained the query. You can also try checking the correctness of your result by including ppa.EFFECTIVE_DATE in the select statement.

Payroll cost codes update i r 12 Urgent

Similar Messages

Maybe you are looking for