Configuring Cost Code along with Payroll elements in Timekeeper time entry

Hi,
I am trying to configure cost code as a separate entry along with payroll elements in timekeeper time entry screen.
Can any one help me in completing the task.
Regards
BK

I have configured the time keeper time entry scree of my own.

Similar Messages

Image on jsp from database along with other elements on image.

Hi All,
I wish to display an image which is stored in my database along with other contents on the page.
I am able to display the image on an entirely new page but I do not wish to display it on a new page. Neither frames etc fit on my current page design.
Kindly help

I have a jsp page ..
I have a byte stream in which i have stored the image from the database (the image is stored in databse as blob) in that jsp.When i use output stream object to display the image from the database (as suggested by many in this forum), the image is displayed in a new page. I wish to display the image along with my other elements like text etc in the same page.

How to scale the content along with child elements?

By default I need my application size to be compatible with 1280x800 resolution; and if the application is viewed at a bigger resolution, only the background needs to be stretched, therefore I have to hardcode canvas size and set background in percentage. Till now it is alright, but when the application is viewed at a smaller resolution or with window size scaled down, the application content should also scale along.
So, any clues on scaling down the content [along with child contents]? mind you, it has background images so must be scaled with proper aspect ratio.
Thanks for any help.
Siraj Khan
[email protected]

Thank you for the tip... this solves my problem partially. Now I am working on to scale the inner content of canvas --- on resize. Since there are elements like buttons and images, i can not define them in percentage, so i need to first check what exactly is the percentage of reduced canvas, and then accordingly i'll have to apply that percent on the inner elements. Any other better idea? as i see this only as a work around, not a proper solution.
Anyway thanks again for the help.
-Siraj

How to configure File Adapter along with OS command option

Hello,
I want to configure a scenario using File Adapter with OS command option.
How to use that option in channel configuration of File Adapter.
What is the default path where it is actually runs this OS command?
Thanks,
Soorya

>
surya venkat wrote:
> Hello,
> I want to configure a scenario using File Adapter with OS command option.
> How to use that option in channel configuration of File Adapter.
There are two ways to use the Os command in the file adapter.
Lets talk about the sender File Adapter.
First: Run operative system Before Message Processing
Whenever any operation needs to be performed uppon the source file Just before XI picks it up.
e.g. Calculate any hash code, backup the file to a given location, create a log at os level, etc...
... After Message Processing
After Xi has processed the message, you can trigger a new os level command:
e.g. Trigger a mail, check if the archiving was successful, etc.
> What is the default path where it is actually runs this OS command?
>
Theres no default path, you assign the desired path in the Comm Channel configuration.
> Thanks,
> Soorya
I hope it helps.

Standard cost estimation along with departmental transfer

Hi Friends,
I will like to have the overview of the
1. departmental transfer price.
2. CKM3N (i.e. material price analysis, what is the difference between activation and non activation of it.)
3. KB21N (Direct activity allocation)
What are their connection in estimating the standard price.

Hi Friend
1) Transfer prices
Transfer price is a price used to valuate the transfer of goods and service between profits centers. Precondition is that you have Material Ledger active
Legal View = Company Code
                                             Parallel Valuation Approach
                                            /                       |                     \
                                    Group                Legal               Profit Center
- If currency type 32, transfer price is active
- Internal moves are always valued at procurement price
2) CKM3N
Before you activate Material Ledger you would have the option of S or V Price control, however when you activate ML you   can value Materials at "periodic unit price", this price takes into account all the transactions of a material in a period(i.e goods movements, procurement etc..) and then at the end of the period revaluates the Material with a new periodic unit price.
3) KB21N
Allocation in general means taking cost accumulated on one object and allocating it to another, usually a cost center.
Direct Activity Allocation is where you use transactions KB21 (KB21N) to manually allocation costs from the cost collector (e.g. Order) to a specific Cost Center. The activities can come from PS or from CATS Activity Recording. These activities are assigned to an order/wbs/network. And from there via the transaction KB21/KB21N they are allocated to a specific cost center.
I hope the above information helps.
Regards,
Declan

Payroll cost codes update i r 12 Urgent

HI all
HRMS has upgraded to 12 .Financials was not implemented.Now they are implementing .When it comes to cost codes how do we update the cost codes !! Cause they have created cost codes and linked to elements at the link lelvel.But they are not using the Financial .i have no clue why they have created this !! But now financials are being implemented and now cost codes has to updated cause they are restrucring the Chart of Account values. How we can update the cost codes !!
Does oracle has API to update the cost codes once i hasbeen configured .Any suggestions on this Greatly Appreciated.

DEar Kumar
AS far as i understand there are no APIS for this where as in general practice we make use of the same valuesets which finance has used but where as in u'r case as the HRMs is implemented first now the Finance guys have to see the Cost Codes which have been defined in the HRMS and is even that is not possible there is nothing u can do rather change the valuesets of the COST Allocation FF.
Hope this information is useful
Regards
Srujana

Codes not visible along with description in Reason for Rejection-VA02

Hi Friends
I am facing an issue. I cannot see the Codes along with Description in Reasons for Rejection drop down in VA02 which are defined in SPRO.
Please help me maintaining front end settings.
Thanks...

Hi,
Click on Customize Local layout(Press Alt+F12)-->Options
Goto Expert tab.
Tick the checkbox under "Show keys in all Dropdown lists".If you want them in a sorted manner,click on the check box "Sort Items by key".
click on Apply and OK.
Regards,
Krishna.

Sync photos with Photoshop Elements 6

I have upgraded to Elements 6 from 5 but touch still syncs albums from 5 even though I have unistalled 5. Anyone got any suggestions please?

I have experienced a similar problem.
I have iTunes on a PC along with Photoshop Elements 7. I have several albums defined in PSE 7. They all appear in iTunes but only 3 of them have the count of the number of photos included in the album. When I sync with the Apple TV, only the albums with a photo count are available. A double check of the content of the albums in PSE 7 confirms that photos are assigned to each one.
I have searched everywhere for a posting of the answer without success. HELP!

Query of GL line items along with "the other side of the JEs"

Hello All,
I am trying to create an ABAP program or SAP query that would allow me to create an output of all line items posted to a general ledger account for a particular fiscal year(s) along with the other side the journal entry.
Said another way, I want all documents posted to a general ledger account along with the rest of the line items included with those journal entry.
For example, if I wanted to do this for Bad Debt Expense (P&L acct), I would like to see all those bad debt write off postings that were (credit Trade AR and Debit Bad debt Expense) vs. adjusting the bad debt reserve or any other posting in there.
Rather than looking at each transaction individually, I think this query would allow me to see the big picture of all posting to a particular account.
Any help is appreciated.

Rob,
I appreciate the insight. I think you answered my questions, but could you provide me with a little more detail so I am on the same page as you.
For the BSIS and BSAS, I am assuming I can just use a FI t-code FBL3N to obtain the information.
Could you explain to me how to get the output in such a way and how to include it in the BSEG to get the complete journal entries for all of the document numbers I would get from the FBL3N. Or can I perform this in one function.
Thank you.

How to do pagination with oracle along with java

hi
i want to know how to use pagination codes along with java.

Are you sure that you're on the right forum? This is the forum for Berkeley DB, Java Edition, and we don't support SQL.
Linda

How to give the Submit along with Variant

Dear Freinds,
           Iam using the Submit program with variant in my custom program . When iam exucting my custom program it is directly opening the program with the variant . ie. just like we execute a program and select varaint.
it is not happening what i want ,it has to schedule the program with the varaint (i.e. what ever fields have been slected in that varaint) and when i go and see in SM37 . The job should get schedule, this was
happening when iam sending one are two parameters in retrun of the submit without me using VAriant.
please help me where iam going wrong.
Not working Scenario (when iam using Variant)
SUBMIT rptqta00
   WITH pnpbegda = sy-datum                                 "'20081201'
   WITH pnpendda =   lv_date                                 "'20091130'
   VIA SELECTION-SCREEN USING SELECTION-SET 'NEW'
   VIA JOB lv_job_name NUMBER lv_job_nr
     AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = lv_job_nr
        jobname              = lv_job_name
        strtimmed            = 'X'
      IMPORTING
        job_was_released     = lv_job_released
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF syst-subrc NE 0.
      MESSAGE i162(00) WITH
      'An error occured while closing the background job.'.
      STOP.
    ENDIF.
working perfectly with the below scenario
SUBMIT rptqta00
WITH pnpbegda = sy-datum                               "'20081201'
WITH pnpendda =   lv_date                                 "'20091130'
with pnppernr = '99002235'
WITH pnpbukrs EQ 'C091'
WITH dis_new = 'X'
   VIA JOB lv_job_name NUMBER lv_job_nr AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = lv_job_nr
        jobname              = lv_job_name
        strtimmed            = 'X'
      IMPORTING
        job_was_released     = lv_job_released
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF syst-subrc NE 0.
      MESSAGE i162(00) WITH
      'An error occured while closing the background job.'.
      STOP.
    ENDIF.
now my question is what i have to do in the case of VAriant so that it acts exactly as the below parameters.
My problem why iam going to varaint is in the standard program rptqta00 i have a button Like TESTRUn ,Batchinput,Direct etc.............. this iam not able to pass the OK code along WITH in the     Submit syntax.... i dont know how to pass in the case of Button's along with Submit ,,,,,,,,,however iam able to do for radio buttons .
could any one tell me why the variant when iam using is taking me directly to the program instead it is not returning
secondly if iam passing each parameters in the submit program how can i pass the BUTTON value ( which is having tick option for either TESTRUN ,Batchinput,Direct )
Please could any one help.
regards
divya

Dear Freinds,
              I found the solution , i have used the ok code of the button while passing into submit program it is working . Thanks once agian
regards
divay.

Sync Photos with Photoshop Elements?

Hello everyone, I saw a couple weeks ago that you could sync your photos from Photoshop Elements to your ''iDevice''. I am using Photoshop Elements 9 to sync Faces and Albums, because you can't sync those on Windows.
I downloaded it yesterday and organized my photos.
But I'm unable to sync the photos like I wanted, the only option available is to sync Albums, not the faces of people in photos...
Do you think I should contact Adobe, or what?
Thanks in advance, Pietro.

I have experienced a similar problem.
I have iTunes on a PC along with Photoshop Elements 7. I have several albums defined in PSE 7. They all appear in iTunes but only 3 of them have the count of the number of photos included in the album. When I sync with the Apple TV, only the albums with a photo count are available. A double check of the content of the albums in PSE 7 confirms that photos are assigned to each one.
I have searched everywhere for a posting of the answer without success. HELP!

Scxi 1126 frequency measurement along with other scxi modules

I want to measure frequency signal using sxci 1126. I have gone through the example code for sxci 1126. I am using NI-DAQ and Labview 7.1.
The example code is applicable when am acquiring only from 1126. I have to acquire data also from 1102 102B along with 1126.
In the example code along with AI config.vi and Ai Start.vi there are two additional vi's like AI paramete.vi and AI Trigger config.vi I understand that they are used for reading from 1126. My worry is how this is going to affect my acquisition from other scxi modules as all the modules are in multiplexed mode.

Hi Bipin,
Looking at your code, I see that you are still using Traditional DAQ. Since you have LV 7.1, you can take advantage of the new features of DAQmx.
With DAQmx, you can create a virtual task that includes all of the different types of measurements you want to make. Once you set up the task in MAX, you can place it on the block diagram and automatically generate the code necessary to execute this.
To do this, open up the Measurement and Automation Exlporer (MAX). Select "Data Neighborhood" from the tree on the left. Then click the button labeled "Create New." Create a DAQmx Virtual Channel. Follow the series of menus to set up your first type of acquisition (1126 frequency measurement). When you are
done creating the task, you can add the second type of measurement to that same task. In the task config page, you will see a white box with the name of the channel you just created in it. Above the name you will see an "Add" button. Click on this button and follow the menus to set up your second measurement (1102 module).
Once they are set up, save the task and open LabVIEW. Place the DAQmx Task Name constant on your block diagram found in All Functions >> Data Acquisition >> DAQmx... the task name constant is a purple colored box. Clicking on the box once its on the block diagram will expand a menu that will let you choose your task. Once selected, right click on the task name and choose Generate Code >> Example. This will automatically generate the code necessary to run the tasks. Simply hit the run button and enjoy!
Thanks,
Sal

Another tax determination code being picked up along with right tax determination code during creation of BBP

Hi Experts,
There is an issue I am facing while creating BBP, the slices in table DFKKMOP are having another tax determination code being picked up along with the right tax detemination code.
E.g. -> In EK02 for the BBP I have configured tax determination code ZA for main 0051 and sub 0050 for all the company codes, but it is also picking ZX which I have configured for main 100 - sub 202,203 , main - 200 sub 202,203 , main 300- sub 202,203.
Strangely In the table DFKKMOP the tax determination code ZX is coming in the line which has main 0051 and sub 0050.
I dont understand why ZX is being shown in the field BB grouping - Budget Billing: Grouping Key for Tax Determination Code.
I have double checked the customizing in EK02 and I dont find this tax determination code being defined for main 0051/sub 0050, then why is it being picked up for BBP line item in table DFKKMOP.
Any suggestions are appreciated.

Well the issue was during creation of BBP items in DFKKMOP the VAT corresponding to Main/Sub 100/ 3xx was being picked up and when I adapted the tax determination code there. The items was created without any split.
For the second one PA issue, well in this case the tax determination in the standard during the creation of PA invoice via EA27 is happening on the date of execution and not on the selection date or posting date. This is because in SPRO the config. of invoicing <<Define Basic Settings for Invoicing>>
has <<Date type for tax determination in Invoicing for Part. Bills.>> set to <<tax determination in invoicing based on entry date>> that is why it takes the execution date into consideration.So even when we do a posting for SOLLDAT in future to take another tax code it doesnt take that SOLLDAT instead takes todays execution date for which the new tax code is not valid.
To overcome this issue either we need to make the new tax code valid from date in past ie. before the date of execution or we need to change this parameter in customizing <<Define Basic Settings for Invoicing>> to <<tax determination in invoicing based on Posting date>>.
Voilà!

Cost Center Report with Cost Element wise Subtotal

Hi All,
We have a requirement where customer wants a Cost Center report with Cost Element wise Subtotal and selection options required are Company Code, Cost Center, Cost Element.
KSB1 solves the requirement, but when executed for 2 or more company codes it is taking 3 to 4 hours.
The other alternative report we tried is S_ALR_87013611- Actual/Plan but this report gives debit and credit values in seperate columns.
Please let me know if we can copy the report S_ALR_87013611 and change it using report writer to have the output by Cost Element wise total.
Also please let me how we can increse the speed of KSB1 report.
Thanks
Satish

for KSB1 Report the following is my suggestion
1. Please go to the selection criteria for the cost elements and de select the secondary cost elements in the the exclude range and try running the report this is generate the report faster.
2. also check the date range please give the date range for 3 t months and if you want to run for multiple company codes. if you want to execute it for longer periods say 9 months or 6 months generate the report in 2 to 3 installments and download them to your excel and consilidate them in excel for your analysis
Best Regards,

Configuring Cost Code along with Payroll elements in Timekeeper time entry

Similar Messages

Maybe you are looking for