PC cannot read my E51 2Gb Sandisk microSD memory c...

The Sd works just fine in my Nokia E51 but transfering (large) files to the phone is terribly slow so I tried to copy the files using the microSD adapter and my mmc reader as I was sure this was going to faster but for some strange reason the microSD is not recognized on my PC.
Does the SD have a special format so PC cannot read or am I missing something out here ..?

I had the same problem with my 8GB Sandisk, then I solved it, the problem was that the phone locked the card with a password. so go to menu/tools/mem.card and remove password if there is, hope this helps.

Similar Messages

Cannot transfer photos from sandisk micro memory card reader to i photo in mac os x 10.6.8

Cannot transfer photos and videos from sandisk micro memory card reader to i photo in mac book pro. The photos were taken on my samsung phone. The chip was then placed in the sandisk and plugged into laptop. They appear in finder window but I don't know how to get them into i photo.

Select one file and type Command+A (Select All) to select all at one time.
OT

Hello MacBook Pro Musicians- I cannot read sheet music from the ipad. It is too small. I want to connect a large monitor, hopefully wirelessly to my 13 inch macbook pro. what would I need to connect ? Any suggestions on how to keep monitor from falling?

Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook. I want the monitor to be connected wirelessly or using a blue tooth. This will eliminate alot of potential mishaps
when playing out. Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!! Can anyone help me with this?

Hi Julius,
As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
Peace,
Jeremiah

Cannot Read Body of my Mail on MacBook Pro

I am using Mail with the latest Mavericks on my MacBook Pro....and it is all updated to the latest software updates. For the past 5 or 6 days, I cannot read the body of my mail. The headers etc. are visible but in the preview pane below, nothing shows. I think this started because I had left the computer for a few hours and it went to sleep. When I tried to get back on, nothing happened. I pressed the enter and other keys but it still kept 'sleeping'. I finally resorted to turning the power switch off and was presented with this problem. I have searched these forums and though there are a few instances of this, they either seemed to be with older OS systems or on the initial installation of Mavericks....I have had Mavericks since it first came out with no issues. Also, the majority of these type issues seemed to be with the iPhone or iPad...and I still have not been able to get to the bottom of this.
I have tried to Rebuild the mailbox several times but to no avail. Sometimes the Mail also quits unexpectedly and I am given an error statement. Any help will be greatly appreciated. Thank you.
I have a 2008 MacBook Pro with a 2.53 GHz Intel Core and 8 Gb RAM....and about 40 Gb of free space.

Humm,
In the Mail > Preferences I have it set to display in Classic view.
Side bar or Accounts in-boxes and other folders
Then a top window of Messages left or new in the In-boxes and the messages being "read" below that.
There are occasions when deleting a messages in the top window does not automatically select another.
This can mean nothing displays in the bottom box (I just can't re-create it right now ).
If I change to the regular/default view I see the Side Bar still, then the Summary column followed by the Messages column.
The Summary I have chosen has three Messages related to it.
In the Messages column I have scrolled the first to reveal the contents but also show the Header of the next. (I chose to show Full Headers so there is a lot of info here or not only the Sender but the Server(s) it came through to get to me).
I take you do mean the actual Header to the actual message (the lower right item in the pic) rather than calling one of the columns "Headers" ?
7:48 pm Sunday; August 3, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

MBP Mountain Lion Cannot read or recognized Micro SD Card and SDHD card

I recently did an update on my MBP and imac (both are mountain lion: OS X 10.8.2 ). Now both cannot read or recognize my Micro SD card (inserted using adapter**) or my SDHD card when inserted in SD slot. I could not see the card in Disk utility either. I started having the problem today after I did the update earlier this week, but last week it was working fine. Can someone please help me? I do not know what else to do. Your kindness is highly appreciated.Thank you.
** I tried 4 different micro SD adapter, nothing happened.

http://www.droidforums.net/forum/droid-x-general-discussions/62380-damaged-sd-card-please-help-2.html#post672198
http://kb.sandisk.com/app/answers/detail/a_id/3465
http://www.droidforums.net/forum/droid-x-general-discussions/62380-damaged-sd-card-please-help-2.html#post672198

Cannot pair my E51 with my jabra bluetooth ear pie...

I cannot pair my E51 with my jabra bluetooth ear piece.I have paired my wife's phone with my E51, but cannot pair my E51 with my ear piece. Any help would be much appreciated.

sorry... the Bluetooth in the iPhone only works with a Hands Free Headset or Car Kit but not to another phone , not even an iPhone ..

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

"Itunes cannot read the contents of ipod. Go to the summary tab in Ipod preferences and click Restore to restore this ipod to factory settings." What is this?

I have been getting this error message since about the end of June when I updated to the latest version of iTunes. It's pretty annoying. Let me lay out how this has been happening for the past month, the best I can. I have a 32GB 4th gen iPod Touch
I load content up to my iPod. Music, Apps, Videos, pictures, etc.
My iPod works well for a little while, days sometimes a week is the longest I went without seeing this message.
I connect iPod back to my laptop through the standard pack in Apple USB connector.
I get the "Itunes cannot read the contents of ipod. Go to the summary tab in Ipod preferences and click Restore to restore this ipod to factory settings." message. When I go to the preferences tab, I click restore and iTunes gets stuck trying to restore my iPod. Then I have to uplug my iPod. And Shutdown/Restart my PC reconnect my iPod, and go through the restore process again.
I have been doing this for as I said, a month. It's getting pretty grueling to keep havomh putting cotent on my iPod after these restores.
I've tried everything.
I've stopped autosync, it still happens.
I tried to reinstall iTunes(be it I didn't full uninstall before trying to install again and got the option to fix corrupted files and such
I've deleted all old back up, and it still happens
Today is the fist time I'm fully uninstalling iTunes, and then reinstalling to see if this works.
But do you guys have any otehr solutions for this? As I said, this didn't start happening until I installed the lastest version of iTunes 10.6.3

- Have you tried another cable?
- Another USB port?
- When you have the problem, connect it to another computer to help determine if you have an iPod or computer problem.
- Try just restoring the iPod to factory settings/new iPod. Do not restore from backup. If you still have the problem with this and all computer that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I cannot read books on my iPad that I have already purchased from kindle..it will download the book but will not open it. I have tried to delete the app n re register it, that does not work. Help?

I cannot read books on my iPad that I have already purchased and store on my kindle fire and kindle ereader..I have tried to delete app an reregister, to no avail..help!

Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.

Error ORA-20003: Cannot read file/... in Cash Management?

Dear All.
I am having this Error in the Cash Management Module on the bank statement load process
Error ORA-20003: Cannot read file /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
How do I resolve this error.
Thank you.

Hi Lucy,
The error is probably due to one of the reasons:
1. There is no file in the location: /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
2. No permission on the file respective file.
Please get the assistance from the DBA to check on this.
Thanks &
Best Regards,

RH 8: Error: Cannot Read RHFrameStyleMappings.apj

We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open. Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj" and once again I copied it over from another file. I tried opening it again and it worked. I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed. Thanks!

Is that not the same problem as running in this thread?
http://forums.adobe.com/message/2311195#2311195
See www.grainge.org for RoboHelp and Authoring tips

Cannot Read Files off CD/DVD Drive

I realize there are several similarly titled posts on this topic, but I have not found the problem I have. Computer: Pavilion tx2000CTO. O/S: Vista Home Premium (all updates current).
Issue: Some CD's and DVD's cannot be read completely. I CAN navigate the directory structure. I CAN see the files. I CANNOT open them. When I attempt to open from the DVD drive, nothing happens. No errors or other messages. When I attempt to copy to the HDD, I get the error "cannot read from the source file or disk". This does not happen on all disks, but I cannot find any pattern between when i can or cannot read. All of these disks are readable on other systems.
Note: similar for media files or disks. Some readable, some not.
Thanks for your help!

I mean raw format, though you mean your disc is mounted, however you can't read the files on the disc?
-- kaz-k

PC cannot read my E51 2Gb Sandisk microSD memory c...

Similar Messages

Maybe you are looking for