PC Software Updater - won't see my N80

PC Software Updater has been updated but won't see my connected N80. It says if this happens the Updater software is incompatible with my phone - can this be true?
Thanks and regards.

Thanks to respondents. I also spoke to a very polite guy on the ClubNokia Careline. He sent me some information which I attempted to use with the following results. The text in quotation marks is from my reply to Careline.
"Here's my experience to date with the mind boggling Nokia software.
I started working thru your 13 (13!!) instruction guide which referred me out to another 10 (10!!) instruction sub-guide on preparing my phone.
The sub-guide,among other things, told me to install PC Suite, which I did.
I returned to the main guide which told me to download PC Suite Cleaner. I went to the PC Suite Cleaner page to be told that Suite Cleaner was incompatible with the version of PC Suite I had just installed, and also that in some circumstances - unspecified - Suite Cleaner would destroy user files! So I did not bother with Suite Cleaner.
I went back to PC Suite and discovered that Software Updater is on its menu.
After a long struggle during which I got the phone to recognise the USB cable and Windows to recognise the phone immediately, I got PC Suite to find the phone.
Having got PC Suite telling me the phone was connected I invoked Updater from the menu. Updater, of course, has to find the phone for itself - it didn't, time and again it didn't. Not only did Updater NOT find the phone but its searching DISCONNECTED the phone every time.
I finally gave up and decided to uninstall all the Nokia software from the Control Panel.
And then the Nokia coup de grace!!! I could not get to the Windows Control Panel!!! Windows kindly told me that it had and still has a problem with a Nokia file in attempting to load the Control Panel. I cannot get to the Windows Control Panel of my computer because of incompetent Nokia software.
I just cannot believe that software as badly designed, executed and documented could emanate from an organisation with the resources of Nokia!

Similar Messages

Internet Connect crash/Software Update won't open

I have a 500mhz G3 slot loading iMac running 10.3.9
About 2 weeks ago, after waking FrankenMac up from sleep mode, I noticed the Airport status symbol failed to appear in the menu bar (next to the volume/date&time etc).
Looking into my Network settings revealed that I was indeed still connected to the internet, via my Airport, all systems go. However, I noticed that "show airport status in menu bar" was unchecked, so I checked the box. Which apparently did jack squat b/c there's still no icon.
For the last couple weeks, as long as I've been connected to the internet, I could really give a flying flip about whether the airport status icon is there or not. I mean, seriously. I know this computer is a little old so why rock the boat on something trivial?
Until today. Today I was determined to figure out where the icon is, why it went away and if there are any other underlying problems.
I started first with Internet connect. Applications->Internet Connect, clicked on the purple IC button, only to have it launch in the dock, bounce once, then quit.
_A crash log shows:_
Host Name: Handlevandal's-Computer.local
Date/Time: 2008-06-18 09:13:15 -0400
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: Internet Connect
Path: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect
Version: ??? (???)
PID: 437
Thread: Unknown
Link (dyld) error:
dyld: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
I attempted to open Software Update next to see if there was something critical (ha!) I might be missing. Apple menu->software update and it was a repeat performance of Internet Connect, except this time I wouldn't even get so much as the Software Update icon in the dock. The dock would move everything to the left, as if it was going to open, then....nothing.
*Software update was working as of 6/14*, when I updated (perhaps foolishly) to Quicktime 7.5.
_Crash log shows:_
Mac OS X Version 10.3.9 (Build 7W98)
2008-06-18 13:56:17 -0400
2008-06-18 13:56:19.213 SystemUIServer[200] * -[NSBundle load]: Error loading code /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/Cli entController.bundle/Contents/MacOS/ClientController for bundle /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ClientControll er.bundle, error code 1 (link edit error code 1, error number 88 (dyld: /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
2008-06-18 13:56:19.214 SystemUIServer[200] Error loading AirPort Menu Extra: Couldn't initialize shared Controller
2008-06-18 13:56:19.227 SystemUIServer[200] failed to load Menu Extra: NSBundle </System/Library/CoreServices/Menu Extras/AirPort.menu> (loaded)
dyld: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
2008-06-18 13:58:33.684 System Preferences[338] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
This ridiculously long post boils down to 2 questions, really.
• Any ideas why Internet Connect and Software Update won't open and how to fix?
• Where in the world is my Airport status icon? (not that it matters since I'm connected to the internet, but doggone it!)
I've run Disk Utility, repaired permissions and the HD checks out fine. I'm just at a loss (not surprising, given my limited amount of fix-it-yerself knowledge)
Should I just put up, shut up and be grateful that these problems, while aggravating, aren't majorly disrupting my life?

Okay no worries, can't find where to delete this post...

Software Update won't check for updates automatically

Hello
Since my update to Lion, the automated Software Update (Preferences -> Software Update) won't check automatically for updates, even if it's configurated to check daily. I can see this behaviour on different MacBooks with Lion.
If I check manually, I'll get all necessary updates - but not automatically.
Do you've an idea or the same issue?
Thanks & Regards

If your logged in as Standard User it won't check.

Software update won't let go of "iDVD Extra Content"

After update to 7.1.2, every time Software Update runs I see a half gig for this item. I installed it the first time. Still crops up. I tried ignoring it with that Software Update capability. Still crops up next time. Not listed in Apple Downloads and can't find any info on the web.
Anyone have this experience? Anyone know how to get it to stop bothering me?
thanks,
Bob

Download and reapply the iDVD 7.1.2 and see if that won't stop that message.
OT

After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

Is the "software update" for iTunes 12? Or something you did to the iPod?

Cannot update Facetime from 1.0.3 to 1.0.5--Software update won't update it and app store says already installed can't buy it??

Cannot update Facetime from 1.0.3 to 1.0.5--Software update won't update it and app store says already installed can't buy it??

Try re-indexing Spotlight.
Spotlight – Re-index
If worse comes to worse, and it is in your Purchases tab, delete 1.0.3 and download it again. You might need to do Spotlight again.

I bought Finalcut X from the App store store when it first came out but software update doesn't see it and let me download the newer versions! How do I fix this?

I bought Finalcut X from the App store store when it first came out but software update doesn't see it and let me download the newer versions! How do I fix this please?
thanks
Russell Moran

Just delete it from the Applications folder, and re-download it.
If it still says installed when you go to Purchased in App Store, click somewhere else, and option-click Purchased. That allows you to redownload already installed software.

Software update won't open, or App Store, and Mail won't let me select messages.

Hello,
Moutain Lion is playing up on my machine. Software update won't open, or App Store, and Mail won't let me select messages. Everything else takes at least 20 seconds to open fully.
Any ideas on what to do here?
Cheers,
George
Spec:
Processor 3.4 GHz Intel Core i7
Memory 12 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 2048 MB
Serial Number DGKGG1HTDHJW
Software OS X 10.9 (13A603)

Okay no worries, can't find where to delete this post...

Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

Hi my Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

Please include your Mac model and OSX in your profile, as it will help the community to help you. Thanks and welcome to Apple Communities.

Itunes & software update won't download

I opened iTunes today and it said there is an update so I clicked Download.
When the App store opens, a couple old apps like Final Cut are still up there that also don't work as well as a new Software Update.
I hit Install All and nothing happened apart from an error message about Final Cut.
I restarted twice and still it's happening, although iTunes and Software updates won't show up.

Did you try simply downloading the latest version of iTunes using the link below and then installing it on top of the older version?
http://www.apple.com/itunes/download/
B-rock

Ios7 Notification of software update won't disappear

Hello, My iphone 5 is up to date (with ios7) , but my setting still shows a notification of software update and when i click on it it says your software is up to date. But i still have the red dot with a number one and it really bothers me. Also with this update i didnt seem to get the new sound available on ios7. What should i do?
Thanks,

Download and reapply the iDVD 7.1.2 and see if that won't stop that message.
OT

Safari, iTunes Store connection, Software Update won't work

I'm having a strange problem with my iBook...Safari will not load/open, Software Update from the blue apple menu at the top won't work and now I can't access the iTunes Store. I have no problem with my internet connection and Firefox works fine along with Mail. Safari has never worked actually, but the iTunes Store and Software Update are the new issues. I've repaired the permissions over and over, and I have not loaded any third part apps. Anybody have a clue about what the heck is going on here?!??!!!

HI Martin,
I see you did the 10.4.10 update. Did the problems exist before the update?
Whether they did or not, you have network issues. iTunes/Safari/Mail all require networking preferences and they can become corrupted. You said Safari has never worked... that could be the culprit of all your probs right there. And much as I like Firefox, it has caused too many connections issues to list.
First... before you do anything, back up important files, data/audio/images etc.
Second.. the following are System Preferences that need to be trashed. I know you've tried a few before, but try this anyway. If it works, you will have to reset your Sys Prefs, but that beats a clean install.
Go here: MacintoshHD/Library/Preferences. Locate and trash the following files: com.apple.networkConfig.plist
com.apple.softwareudpate.plist
Now.. go here: MacintoshHD/Users/Home/Library/Preferences. In the Preferences folder locate these files;
com.apple.safari.plist users
com.apple.itunes.plist users
com.apple.internetconfig.plist
com.apple.internetconfigpriv.plist
com.apple.internetconnect.plist
com.apple.recentitems.plist
com.apple.safari.plist
com.apple.systempreferences.plist
Also, if you don't have a good disk cache cleaner... get Onyx. It's FREE and it works like a charm. Run the Maintenance and Cleaning Scripts once a week to avoid problems such as you are experiencing. Download and intall Onyx per the instructions. Only takes a few minutes...
http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
Have you ran Disk Utility from your system restore disk to check for errors on the disk? You need to verify the disk is OK. If you need help with that, just post back..... I really hope something helps for you.
If all the above fails, at this point you might consider doing a complete Erase and Reinstall from your system restore disk(s).
Carolyn

Since software update, can't see contents of iPod when connected to iTunes

About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra

Resolved at home.

Software update won't suggest my printer!

Ok fine, Software will do your breakfast and everything...
I'm being told on Epson site for my specific printer (Epson Stylus Photo R220) that the driver will be intalled automatically through Software Update...
Apple list confirm that this model is available for ML.
I need that printer *now* not in a month.... But after 6 trials to launch Software Update, Mr. Miracle, I do not get that printer in list of updates. I did everything reuqired of course (connected and powered on the printer).
Is there anything that can be done with Mr. Control Everything so to get that **** printer up and running so I can perform my work ?
Thanks,
Rob

Your printer is listed as supported here:
http://support.apple.com/kb/HT3669#epson
Try disconnecting the printer first, then running Software Update.
If that doesbn't work, try deleting the printer and adding it again. For further advice on troubleshooting printers, see
http://support.apple.com/kb/TS3147

Software Updates Won't Download - EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0

I have a new software updates deployment. I see there are updates that are required on a few clients. The clients work fine with a software package/application, as they download fine with no problems, so it's not a boundary issue. But I can't get the software
updates to work. I keep seeing in updatedeployment.log total actionable updates = 0 even though right above that it is clearly finding new updates.
Message received: '<?xml version='1.0' ?>
<CIAssignmentMessage MessageType='Activation'>
<AssignmentID>{9B41A813-B69C-43D0-BE65-050E29AA0438}</AssignmentID>
</CIAssignmentMessage>'
UpdatesDeploymentAgent 6/24/2013 10:55:00 AM
3532 (0x0DCC)
Assignment {9B41A813-B69C-43D0-BE65-050E29AA0438} has total CI = 3
UpdatesDeploymentAgent 6/24/2013 10:55:00 AM
3532 (0x0DCC)
Assignment ({9B41A813-B69C-43D0-BE65-050E29AA0438}) received activation trigger
UpdatesDeploymentAgent 6/24/2013 10:55:00 AM
3532 (0x0DCC)
Detection job ({AC8530B9-DA33-49E7-BB34-2A2C78A25D68}) started for assignment ({9B41A813-B69C-43D0-BE65-050E29AA0438})
UpdatesDeploymentAgent 6/24/2013 10:55:00 AM
3532 (0x0DCC)
DetectJob completion received for assignment ({9B41A813-B69C-43D0-BE65-050E29AA0438})
UpdatesDeploymentAgent 6/24/2013 10:55:08 AM
2612 (0x0A34)
Update (Site_2E061C3D-D55B-4363-9B3F-F1717564F205/SUM_2660f150-7e35-467b-8ca2-04de7478eabb) added to the targeted list of deployment ({9B41A813-B69C-43D0-BE65-050E29AA0438})
UpdatesDeploymentAgent 6/24/2013 10:55:08 AM
2612 (0x0A34)
Update (Site_2E061C3D-D55B-4363-9B3F-F1717564F205/SUM_25f15c26-9a8b-4231-ba9c-1d41d3caf7ff) added to the targeted list of deployment ({9B41A813-B69C-43D0-BE65-050E29AA0438})
UpdatesDeploymentAgent 6/24/2013 10:55:08 AM
2612 (0x0A34)
Update (Site_2E061C3D-D55B-4363-9B3F-F1717564F205/SUM_338b46cc-c71e-4294-a9d3-df943ffef642) added to the targeted list of deployment ({9B41A813-B69C-43D0-BE65-050E29AA0438})
UpdatesDeploymentAgent 6/24/2013 10:55:08 AM
2612 (0x0A34)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 6/24/2013 1:08:23 PM
3444 (0x0D74)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 6/24/2013 1:08:25 PM
3444 (0x0D74)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 6/24/2013 1:08:26 PM
3444 (0x0D74)

Anyone have any update to this scenario?
I did a site recovery to new hardware, and subsequently new WSUS version for Server 2012, and am having issues with deploying software updates. Like the OP above I can deploy applications and packages with no issues.
I've deleted the software update group, recreated and deployed to a collection with machines that do not have these updates installed, since they are this months newest updates.
In the UpdatesDeployment.log I see the following logged:
Software Updates feature is enabled   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
Assignment {AF4C3613-4AB2-4F31-8CF2-3143D550F666} has total CI = 119   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
Assignment ({AF4C3613-4AB2-4F31-8CF2-3143D550F666}) reconnected to the existing job ({F03BB87A-5C38-437F-9D75-ECFB50CD8986}) successfully.   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
No current service window available to run updates assignment with time required = 1   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
No current service window available to run updates assignment with time required = 1   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
Startup task completed   UpdatesDeploymentAgent   10/16/2013 4:42:58 PM   7288 (0x1C78)
User logon system task   UpdatesDeploymentAgent   10/16/2013 4:43:08 PM   7036 (0x1B7C)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0   UpdatesDeploymentAgent   10/16/2013 4:43:18 PM   7400 (0x1CE8)
So it's like it sees the deployment but is not evaluating that it needs the updates. I'm at a loss of where to look next so if anyone can provide any additional suggestions it would be greatly appreciated.

PC Software Updater - won't see my N80

Similar Messages

Maybe you are looking for