PCSuite Install Application problem

hi, well my problem started today when i wanted to install applications or themes or anything on my n80.
First of all i have windows xp with service pack 2, pc suite application 6.83.14.1 and i tried connecting via bluetooth and cable.
connection is successful through cable or bluetooth. but today i suddenly cannot install anything by double-click. i was able doing that before with no problems at all. i tried everything (uninstall pcsuite, update pcsuite, uninstall bluetooth solei, install it again, now i uninstalled everything again and install windows bluetooth drivers.) everything is the same. i have connection, and i CAN install through nokia application installer ONLY IF i choose install destination to my memory card and not phone memory. before, i could install applications by double click, or by nokia application installer with destination to phone memory but now i cannot install with double click nor if the selection in nokia application installer is set to phone memory. please help me because i'm worried that something soon will be wrong. thanks in advance!
PS error is always "Operation failed". in solei serial a, and serial b were set. i tried also by unset them, set new com port etc etc.
josip.

I had same problem.Then i ve formatted my N80 by entering code *#7370#
So problem is solved...

Similar Messages

Installing Applications problem

Hello, I cannot find a solution for this problem - can somebody help me?
Here is it:
I just purchased my MAC PRO few weeks ago, and started installing some applications.
But a problem occurs with some old applications.
The problems is that when I click on installers, the message appears:
"You cannot open the application "APPLICATION NAME",because it is not supported on this system".
Can you help me with this? It happens with many applications, including PRO TOOLS LE and other pluggins that I use.
If you cannot help me with this, please tell me who can I ask.
Thank you very much.
MAC PRO Mac OS X (10.4.8)

Your new Mac is one with an Intel processor. The old apps you are trying to install might be PPC apps (should work with Rosetta which emulates PPC on the Intel) or Classic apps (OS 9 and prior which will not run at all on Intel Macs).
Let us know which of these situations applies to the apps you are trying to install. Be sure to check on the various websites of the companies that produced your apps to see if updates are available.
Of course if any of the apps are PC ones these will have to be run using either Boot Camp or Parallels and a copy of Windows.
Regards,
Steve M.
Message was edited by: Steve M.

TS2446 i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, what is the problem? what can i do ?

i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, i creat a new password and still that message shoes ,what is the problem ?can you help me please???!!!!

If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Problem in downloading and installing application ...

hey
m havng problem in downloading and installing application on mah x2-01 . many times i tried to dwnload whatsapp to mah phn and if the application isz downloaded thn while verifyng the no. it says error unitterupted problem in contacting the server . so knw wht shud i do . i hav also restrore mah phn thn too. plz help me

You may verify first your mobile number from this link. Make sure to sign in and under Mobile numbers, click Verify now.

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Cannot open install assistant. I get this error message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Pleas

How can I downloade a trial of Adobe Elements 12?
I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Hi alposer,
Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
Regards,
Rave

When trying to uninstall iTune (because the current install has problems), I get the error message 2324. What should I do to reinstall the application?

When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?

That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.

I have problems with installed applications

I have problems with installed applications, I used to work correctly, but yesterday it just stopped working all run which came by default. could tell me I have to do to eliminate this problem?

Try downloading another app - any free app is fine. See if that resets the other apps and allows them to work again.

After Installing Application Server - Problem connecting to my Databases

I have 10g installed on my Windows server, and have no problems connecting to my database(s). After I install Application Server 10g, I am no longer able to connect to any of them, as if the TNSNAMES.ORA file is no longer configured correctly. I am training myself on these applications. Anyone have any suggestions what is happening behind the scenes?
Thank you,
Daniel Nadler

After deploying a jsf application via the web interface of the application server enterprise manager I tried to connect to the 10g database - and it failed with the same error as yesterday?
I really don't unterstand what is going on. I would really appreciate it if someone could point me out where to start digging for a solution / unterstanding of the problem.
Quoting this thread (installing db on same server as AS): 10gAS and Database Server on the same machine
>
Yes, you can do this. Here are some guidelines:
(1) Make sure your system requirements are sufficient to handle the application server and the database. The recommendation is to add the AS system requirements and the DB system requirements together.
(2) Install each product into its own Oracle home. For example:
- Oracle Home 1: AS Mid-tier
- Oracle Home 2: AS Infrastructure (including Metadata Repository)
- Oracle Home 3: Database
(3) If your AS installation includes a Metadata Repository, make sure that the
Metadata Repository and the database use a different SID and global db name.
(4) It is possible that the Metadata Repository and the database can share
port 1521. Review this information before you start your AS installation:
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#CIHEBFDG
The installation guide under (4) tells me that I don't have to worry since I use a new listener version.
To complete the confusion: on my virtual test machine oracle 10g and oracle AS 10g work fine side by side?? Perhaps because I did a Standard Edition install of the database (on the real machine I used Enterprise Edition)? Is there a way to figure out what kind of install I did?
Lots of questions, any help or links are really appreciated! Thanks in advance!
------------------ EDIT -------------------
Whoops, I might had a problem with a not correctly shut down database (just shutted windows down without killing the instance - didn't know this wasn't ok). Still evaluating the issue. But to say the least, it seems the application server has nothing to do with my problem :)
Message was edited by:
mathias.ringhof

Problems installing Application Express - Help Please

Hi
I have the personal edition of oracle and i have a database instance set up in entreprise manager. Now I'm trying to install application express to the database via SQL Plus. I run into two problems
1. It says in the document that you need to log into SQL as SYS rather than SYSMAN, when I do log in as SYS i get the error message saying that I need to choose either SYSDBA or SYSOPER so I do rather than normal but I need a username/password to log in and I don't know what Username/password they are referring to. I tried a couple of usernames and passwords already and have been unsuccessful.
2. So instead of logging in as SYS, I logged into the SQL Plus as SYSMAN. I load the apexin.sql file onto the SQL Plus and I push on execute. The it asks me to enter the 5 things, so i enter "password, SYSAUX, SYSAUX, temp, /i/" and i get the error message "SP2-0916: Scheme not supported"
I have tried several times already. I am working off a toshiba Satellite P200 and it is windows Vista. What am I do wrong please HELP!
Carol

Hi there I'm still running into some trouble here
When I am logged into my Enterprise Manager as SYS on my laptop
I scroll to the bottom to open up iSQL plus and once I'm in, I get to the iSQL Plus Role Connection and there is 3 choices - 1) Normal 2) SYSOPER 3) SYSDBA
I can log into normal with SYSMAN but when i choose SYS, it tells me that I must choose either SYSOPER or SYSDBA
If I choose either of those, I get another login pop up saying that I need to log into the DBA system, but I don't know what username/password they are referring to. I tried logging into iSQL plus and tried executing sys/<sys password> as sysdba but it doesn't work. Please help!

Installing Applications - Permissions Question/Problem

Hi All:
I have tried a number of searches and found variations on this, but was wondering why permissions get modified when I perform drag and drop installations of applications.
When I use an installer to install applications such as iWork, iLife, Office, and Creative Suite, and so on the permissions are always listed as system then admin then everyone, with system and admin being read/write and everyone being read only. In this situation, everything works perfectly. However, when I drag and drop to install applications such as Bento, most shareware, the permissions are listed as my user, then staff or admin, then everyone. Sometimes the staff and admin are listed read only and then the icon does not show up until I manually change this to read/write.
I have also noticed another problem when I am running in my limited access (none admin) mode: When I tried to install a NEW drag and drop application it would ask for a username and password and then install as described in the previous paragraph, but when I tried to install an UPGRADE to an application I had, it would ask me to authenticate. When I clicked authenticate it would go straight to the replace dialog and then when I click replace button it would fail. In the process of failing it would damage the application that was already installed. As a result I would then need to manually remove the damaged application and drop the upgrade back in to the folder, at which it would correctly ask for the username and password.
Something is wrong here. As a none admin user I should not be able to damage applications when prevented from installing them.
I've tried the usual permission fixes, but there must be something that is not quite right. I have even tried a reinstall.
Any suggestions would be appreciated.
Message was edited by: Paul Charlesworth
Message was edited by: Paul Charlesworth

Paul Charlesworth wrote:
Hi All:
I have tried a number of searches and found variations on this, but was wondering why permissions get modified when I perform drag and drop installations of applications.
When I use an installer to install applications such as iWork, iLife, Office, and Creative Suite, and so on the permissions are always listed as system then admin then everyone, with system and admin being read/write and everyone being read only. In this situation, everything works perfectly. However, when I drag and drop to install applications such as Bento, most shareware, the permissions are listed as my user, then staff or admin, then everyone. Sometimes the staff and admin are listed read only and then the icon does not show up until I manually change this to read/write.
this is normal and what you describe is exactly how it should work. when an app uses an installer it runs as root and the installer manages permissions on files it creates. they are always owned by root (=system in Finder GUI). when you install something by drag and drop then the application is owned by you and the group listed is your primary group which is staff.
I have also noticed another problem when I am running in my limited access (none admin) mode: When I tried to install a NEW drag and drop application it would ask for a username and password and then install as described in the previous paragraph, but when I tried to install an UPGRADE to an application I had, it would ask me to authenticate. When I clicked authenticate it would go straight to the replace dialog and then when I click replace button it would fail. In the process of failing it would damage the application that was already installed. As a result I would then need to manually remove the damaged application and drop the upgrade back in to the folder, at which it would correctly ask for the username and password.
Something is wrong here. As a none admin user I should not be able to damage applications when prevented from installing them.
I don't know what exactly happened here but I'm guessing you tried to upgrade an application that was installed by a different user originally. that might create permissions problems. but since all such apps are installed by drag and drop you can always trash the old app and install the updated one by drag and drop. that will always work (you'll have to authenticate of course).
I've tried the usual permission fixes, but there must be something that is not quite right.
repair permissions will not touch any 3rd party apps or files so it will have zero effect on this issue.
Any suggestions would be appreciated.
Message was edited by: Paul Charlesworth
Message was edited by: Paul Charlesworth
Message was edited by: V.K.

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists. help...

Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137

Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
Alan

ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Why does lightroom no longer show up as installed application in creative cloud

I installed Lightroom 5.6 on my Mac and it works fine. However since yesterday it does not show up any longer as installed application in the creative cloud app, so I can't upate to 5.7.

Check your language setting in the CC app. Perhaps you switched it around and the app wants to reinstall everything. otehrwise run the cleaner tool and do a reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

How do I install applications to classic in os 10.4.11

How do install applications to classic in os 10.4.11. Specifically Microsoft Works 4.0. I am trying to get a customers old g4s upgraded in increments so they can get away from os 9.2.2. They have book keeping records that need to be converted from os 9.2.2 and Microsoft Works 4.0 to something more recent.

THAT'S my problem. I've been working on Windows machines since everything was done with DOS commands but don't have any experience with older Macs. I have worked on some OS 10.8.x and 10..9.5s and was able to find the how to's on the internet, but it's very difficult to find any info on 9.2.2 and/or Microsoft Works 4.0. I have found some 3rd party converters that will convert the .wks and .wdb files to .xls that a legacy version of Libre Office can read, but getting the application to install is my problem. After downloading the file clicking on the .dmg file that shows up on the desktop does not install the application. A link to specific directions would be greatly appreciated.

PCSuite Install Application problem

Similar Messages

Maybe you are looking for