PDC is Master Browser but event logs still have alot of 8003 errors

Computer Browser Service is enabled into my domain controller (server 2012) who have PDC Role (all my pcs in same subnet). But I have still the errors 8003 in the event logs that some workstation (members in domain) believes that it is the master browser
for the domain
My Question is Should I disable computer browser service on all workstations in the domain or this are not good idea.

Hi,
You can try the following steps:
Disable and enable the NIC.
Make sure you are not running a multi-homed DC.
Make sure the registry key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters\IsDomainMaster is set to false.
The computer browser service is an NT legacy system and was retained for backward compatibility. So if you do not have any apps rely on this service you can disable it.
You can also refer to this troubleshooting guide:
Troubleshooting the Microsoft Computer Browser Service
http://support.microsoft.com/kb/188305/en-us
Hope this helps.

Similar Messages

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Task Scheduler doesn't work for restarting the server but event log says successful.

Hi All,
I have created a scheduler task to run every weekend to restart the Windows Server 2008 R2 Standard(64 Bit OS). The task everything has been successfully created. I check manually if it actually restarts but it doesn't but on the event
logs of the Task Scheduler it says restarted successfully and returns status code 0. But it doesn't seem to work.
Thanks in advance.

Hi Prasad Venkatesan,
Can you tell more detailed information about how do you set this scheduled task?
To create a scheduler of restarting at specific time, please also try these steps:
Press WinKey+R > type taskschd.msc and press Enter (it will launch Task Scheduler)
Left click from the right pane on the Task Scheduler Library > open Action from the top menu > New Folder... > name it MyTasks
> click OK
Left click on the MyTasks > choose Action from menu > Create Basic Task... (it will open task wizard)
You can enter the Name , for example "Restart", and press Next
In Trigger section you can specify when you want to run your task, for example:
Select Daily , and press Next
Now you can specify the day, the hour and set to recur every day, after that press Next
In Action section you can choose what you want to run, for example restart your system, to do this:
choose Start a program , and press Next
in the Program/script field type shutdown /r , and press Next
please press Finish
Then check if it can work.
Best Regards,
Anna

My lock button on my iphone broke, i have apple care, but will i still have to pay for it to be fixed when i send it in? and how will i get a loaner phone?

The lock button on my iphone is jammed, and i need to send it in to get it fixed. Can someone explain the process to me of sending in your phone to apple? and even if i have apple care, will i still have to pay for my phone to be fixed? if so, around how much do you think this would cost? im not familiar with apple, so any help would be great! thanks!

If your phone was damaged by you or in accidental damage, then you would be liable to pay for the repairs. Apple does not offer "loaner" phones, but if you have a credit card, they will "advance ship" a replacement to you so you can get it, then return your damaged one to them and as long as they get it back within a resonable time and it is warranty covered damage, they do not charge you for the replacement iPhone, but they do charge you a fee for the advanced replacement option (about $40-80 USD IIRC).
You can eliminate all the at by making an appointment at a local AASP (Apple Authorized Service Provider) and they should be able to check your iPhone on the spot. It it is covered under the warranty, they shoud replace it for free right there, and if not, they would let you know and you have the choice to make the repairs or not.

I use Firefox Browser, but I don't have a toolbar. I have tried to install the Verizon toolbar, but that just throws me back to internet Explorer 9 as my brows

I have been using Firefox as my browser, but haven't had a toolbar. I tried to use Verizon's toolbar, but that keeps throwing me back to Internet explorer 9, which I don't want to use, and asks me to use I.E 9 as my default browser. All I want is to use a toolbar with FF ( preferably verizon toolbar, but would use FF toolbar as well), and I can't seem to get one without having to use Int. Exp. 9. Any ideas as to what I can do to get a toolbar on my FF browser?

Hello Fzsishn, did you try to [https://support.mozilla.org/en-US/kb/navigation-buttons-missing#w_restoring-the-default-toolbar-set Restore the default toolbar set] ?
thank you

I registed an accout day ago but why i still have not receive email revify ?

i registed 3 days ago ! but i still have not receive email ! i used itune gift card already ! please tell me why

contact iTunes. Select the appropriate topic here:
Apple - Support - iTunes

HT201210 I still have the same problem error 3194 I followed the instructions still the same in my mini ipad fro restore????

I using Windows 7, try to restore my mini Ipad to factory settings... never jailbrake or somthing like that, still have the problem error 3194!!! for restore, some one help? Thank you

Try going into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then redownload and reinstall iTunes and see if it'll work
If the computer sees your iPad you know the cable and connection is good, so the issue has to be software.

Suddenly I can not select anything within the top inch or so of any web page. The scroll bar arrow doesn't work at the top. I don't know what to do. I tried updating my browser but the problem still exists.

Everything worked fine on Tues. I shut down my system and then on Wed. morning, the problem appeared. Anything within the top inch or so of a webpage is unavailable to select. It is like there is an inch of the page that is dead. It is that way on every website that I visit with Firefox. It does not happen if I use internet explorer, which I do not like and do not want to have to go back to using. Please help!!! My sister in law has the same problem with firefox.

Hi,
Please [https://support.mozilla.org/en-US/questions/911441 see this.] You may also want to check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]

For some reason is all my music gone from iTunes, but I do still have the songs on my iPod Touch... So my problem is that I don't know how to import my files from iPod Touch back to iTunes.

Hey all
I should export my music to another program, because I do also have this MP4, which needs some files. Well, I did that and it seems like Windows Media Player couldn't open the files, but then I go back to iTunes and I see all my files are gone. Nothing is left, and now I can't syncronize files to my iPod Touch without deleting all the existing files. So now the only thing I want to know, if it's possible, is how to import music (not from Apple Store) from my iPod Touch to iTunes?

You can use one of the third-party programs discussed here to transfer non-iTunes purchased music to a computer.
new PC: Apple Support Communities

Hi, where can I manually download windows support software for boot camp windows 7 installation, I am trying through boot camp but its like taking forever to download its been 5 hours but boot camp still have't completed the download

can any one give me a link to download them manually

create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
"Go into System Preferences - Network - Advanced - Proxies Uncheck "Auto Proxy Discovery", click OK, Apply"
After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started. Windows support software is now downloading... if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB and presumably will grow with time.
https://discussions.apple.com/thread/3223773?start=15
Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
208.67.222.222
208.67.220.220
Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

Y suddenly some of my games the sounds dissapear but for videos still have sound. Pls advice pls. Txs.

y suddenly no sounds for my games?

1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

How to write to windows event logs from determinations-server under IIS

This is just an FYI technical bit of information I wish someone had shared with me before I started trying to write OPA errors to the windows event log... Most problems writing to the windows event log from log4net occur because of permissions. Some problems are because determinations-server does not have permissions to create some registry entries. Some problems cannot be resolved unless specific registry entry permissions are actually changed. We had very little consistency with the needed changes across our servers, but some combination of the following would always get the logging to the windows event log working.
To see log4net errors as log4net attempts to utilize the windows event log, temporarily add the following to the web.config:
<appSettings>

<add key="log4net.Internal.Debug" value="true"/>
</appSettings>
<system.diagnostics>
<trace autoflush="true">
<listeners>
<add
name="textWriterTraceListener"
type="System.Diagnostics.TextWriterTraceListener"
initializeData="logs/InfoDSLog.txt" />
</listeners>
</trace>
</system.diagnostics>
To add an appender for the windows event viewer, try the following in the log4net.xml:
<appender name="EventLogAppender" type="log4net.Appender.EventLogAppender" >
<param name="ApplicationName" value="OPA" />
<param name="LogName" value="OPA" />
<param name="Threshold" value="all" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<levelMin value="WARN" />
<levelMax value="FATAL" />
</filter>
</appender>
<root>
<level value="warn"/>
<appender-ref ref="EventLogAppender"/>
</root>
To put the OPA logs under the Application Event Log group, try this:
Create an event source under the Application event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
4.     Right-click the Application subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Close Registry Editor.
To put the OPA logs under a custom OPA Event Log group (as in the demo appender above), try this:
Create an event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the eventlog subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Right-click the new OPA key and add a new DWORD called "MaxSize" and set it to "1400000" which is about 20 Meg in order to keep the log file from getting too large.
7.     The next steps either help or sometimes cause an error, but you can try these next few steps... If you get an error about a source already existing, then you can delete the key.
8.     Right-click the OPA subkey, point to New, and then click Key.
9.     Type OPA for the key name.
10.     Close Registry Editor.
You might need to change permissions so OPA can write to the event log in Registry Editor. If you get permission errors, try following these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the EventLog key, select Permissions.
5.     In the dialog that pops up, click Add...
6.     Click Advanced...
7.     Click Locations... and select the current machine by name.
8.     Click Find Now
9.     Select both the Network user and IIS_IUSERS user and click OK and OK again. (We never did figure out which of those two users was the one that fixed our permission problem.)
10.     Change the Network user to have Full Control
11.     Click Apply and OK
To verify OPA Logging to the windows event logs from Determinations-Server:
Go to the IIS determinations-server application within Server Manager.
Under Manage Application -> Browse Application click the http link to pull up the local "Available Services" web page that show the wsdl endpoints.
Select the /determinations-server/server/soap.asmx?wsdl link
Go to the URL and remove the "?wsdl" from the end of the url and refresh. This will throw the following error into the logs:
ERROR Oracle.Determinations.Server.DSServlet [(null)] - Invalid get request: /determinations-server/server/soap.asmx
That error should show up in the windows event log, OR you can get a message explaining why security stopped you in "logs/InfoDSLog.txt" if you used the web.config settings from above.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363648(v=vs.85).aspx
Edited by: Paul Fowler on Feb 21, 2013 9:45 AM

Thanks for sharing this information Paul.

Windows Server 2008 R2 Security Event Log Maximum Size

I have a customer with logging requirements on domain controllers that are exceeding the maximum log size they have configured for the security log. When they attempted to increase the maximum size of the security event log via Group Policy, the settings
did not take effect. When an attempt was made to increase the security event log manually on the domain controller via the properties of the log, an error is generated whenever the value was changed.
The Maximum Log Size specified is not valid. It is too large or too small. The Maximum Log Size will be set to the following: 196608 KB
The 196608 KB value is the value that it is currently set at. Testing on other logs, application, system, has lead to the same result.
wevtutil.exe sl security /ms:<n> produces similar results. There is no error message given but the value doesn't change when you run wevtutil.exe gl security
When viewing the registry value MaxSize under HKLM\Current Control Set\Services\EventLog\Security the change is reflected, but the log does not seem to get any larger.
What one would expect to be a two minute change in a group policy object has turned into something much more difficult. Any idea what could be causing this?
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

I verified that it was not another policy - the domain is pretty simple without many policies, only policies applied are:
Default Domain Policy (no event log settings)
Company Domain Policy (no event log settings)
Default Domain Controller Policy (no event logs settings)
Company Domain Controller Policy (...\Event Log\Maximum security log size 4194240 kilobytes)
The value was 196608 before, the plan was to change the group policy setting to 4194240 and I expected it to be that easy. However, the values didn't change.
4194240 is divisible by 64
Used multiple tools to try and change
Group Policy
Event Viewer
wevtutil.exe
registry editor
While some of the methods display a larger event log, the actual size of the event log still seems to be limited to 196608 kb.
Thanks,
Joe
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

I disabled Sync history with IE , yet every time i look at my history in Firefox it shows all the IE places i visited , how do i stop this , so i can go to only my Firefox history , but still have IE and Firefox synced

I use Firefox and Google Chrome for forums because they are faster than IE as IE(7) tends to hang a lot , so i have all my Favorites and everything synced with Firefox , as this is my main browser , but i do still use IE7 for some browsing , u went to Settings and unchecked the History , in the Sync section , but when i go to Firefox to view a forum topic i was looking at , recently , if i had gone to IE and visited any sites , then they show up in my history (for example Craigslist , i will look at several adds , and ALL of them are in my Firefox History) and push my Firefox history off the list so i have to go back to my favorites and start over , instead of being able to use my Firefox ONLY history so i can just go to those pages
Is there anyway to fix/bypass this but still have Cookies and Favorites and such synced ?? , without the IE History knocking all my Firefox history off the list ??
It's just annoying to have to go back from the beginning and search the topic i was in on a forum, because it was bumped off the list by any browsing i did in IE7, in between time
Another issues since i am posting:
I also have "Check Places" and it does not bring all the Favorites i have added in my IE Favorites over , the ones i did when i first installed it transferred , but any additional ones i have added to IE will not transfer , is there something wrong with Check Places ?? does it only transfer your Favorites 1 time , and not check for additions to the list then add them accordingly ???

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Errors in event log of Secondary DPM server protecting replicas on Primary

Hello again
I have two DPM servers, one situated on-site (primary) and one situated off-site (secondary). Protection jobs seem to be running correctly on both servers in that the jobs complete and I am able to restore data from the backups. I use the primary server
to make the initial backups of critical systems and data (Exchange MDB's etc) and the secondary server to backup those replicas off-site in case of primary site loss or DPM system loss.
The primary server is a physical server and the secondary server is a virtual server. Both DPM servers have their DPM databases stored on one physical SQL server that is in the primary site.
Basically what is happening is that every day our virtual machines are snapshotted (secondary DPM server included) and everyday the snapshot of the secondary DPM server fails. I see the following to entries in the event log of the secondary server.
Error 1:
WARNING
Source: MSDPM
Event ID: 955
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 2 Schedules removed: 2 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>27861</Seq><TimeCreated>22/05/2014 23:01:31</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Error 2
ERROR
Source: MSDPM
Event ID: 4212
The description for Event ID 4212 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DpmWriter service encountered an error during PrepareBackup as more than one component is selected for backup in the same snapshot set. Select a single DPM replica for backup and try the operation again.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>7</Seq><TimeCreated>23/05/2014 00:30:45</TimeCreated><Source>d:\btvsts\21011\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>438</Line><HasError>True</HasError></__System><DetailedCode>4212</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
These two events are followed by another event from VMWare Tools everyday
Error 3:
WARNING
Source: VMWare Tools
Event ID: 1000
[ warning] [vmvss:vmvss] CVmSnapshotRequestor::CheckWriterStatus():1536: writer DPM Writer in failed state: res = 0x800423f4, err = 0x1, error =
Has anyone come across this before? Currently I am not quite sure what is going wrong and whether it is actually related to snapshots failing, but I want to try to fix these errors first and see what happens.
Regards

Your ar using VMware for Virtualization?
Are you trying to do an online Backup of the VM, think that will not work?
One thing i wonder, your have installed second DPM if Site one fails or goes done, but SQL for DPM2 is in Site one? try to move SQL to external site for DPM 2
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

PDC is Master Browser but event logs still have alot of 8003 errors

Similar Messages

Maybe you are looking for