PDF in-browser will not show attachments panel

Hi. I'm working with a PDF with attachments. I created it to open with the attachments panel visibile. It works fine except for in Chrome, it shows the PDF in-browser but the attachments panel is not visible. This is causing some problems for our site users.
What is the solution here. I'm working my IT department to update the .htaccess file to force all PDF files to download, but this seems like an overly complex solution.
Why won't the attachment panel just show up in Chrome?
Thanks in advance (if this is not the right forum to ask this, any help would be appreciated)

That's not exactly helpful, I know I can set my local computer settings . I was looking for a solution to force the download on our users pages. I came up with a solution regardless.
I just ended updating the .htaccess, adding this command which forces all .pdf files to download versus rendering in the browser, however this is still ignored by Chrome:
AddType application/octet-stream .pdf
But since Chrome accepts HTML5, I also added the download attribute:
<a href="../files/is/2013_EPP_RFP.pdf" download="2013_EPP_RFP.pdf" target="_blank">2013 EPP RFP</a></div>

Similar Messages

  • My default browser will not show my page WHY

    I have a Coffee cup 2008 HTML editor and when I put a page together I look at it and click on check in default browser and below is what I get.
    File not found
    Firefox can't find the file at /C:/Program Files (x86)/CoffeeCup Software/Working/page929.html.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.
    Can anyone HELP me
    I might add It works fine with Internet Explorer but not with Firefox.

    Maybe this issue:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Starting this afternoon, my firefox browser will not show the address that i am on, nor will the backspace button appear, nor does the new history show up. So, i went from 9.0.1 to 10.0 an hour ago. Same problem. Anyone else?

    The whole look of FF was different when this started and after upgrading to 10.0. The tabs don't show up and I have to manually get a new tab.

    Maybe this issue:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Media browser will not load iphoto

    Hi
    My pages media browser will not show my iphoto pics. It shows my files from garageband, but not iphoto. I tried dragging iphoto into the iwork folder and I also downloaded the ilife support 9.0.3 which was recommended in another post,but neither worked. I am able to drag photo folders, but not iphoto files.
    Thanks for your help
    Marcia

    Hi Marcia
    Welcome to the forum.
    Have you moved or renamed any of the iLife or iWork suite? The whole workflow relies on being able to find all the files where they are supposed to be.
    It is best to leave all of these alone.
    You can not drag iPhoto (an application) into the Media Browser.
    You can drag in folders of graphics and it will then browse those. Just be aware it is not actually holding any of the images, just providing links to where they are filed.
    Peter

  • I have photo sharing turned on, on both my Iphone 5 an my PC Icloud control panel but yet my pictures will not show up on my PC, how do I fix this?

    I have photo sharing turned on, on both my Iphone and my PC icloud control panel, however my pictures will not show up on my PC how can i fix this?
    I had a previous problem with this with my old iphone 4 and did not realize there was an issue until it was stolen. I would like to get this straightened out just in case anything ever happens with this phone.
    Thank you in advance for any help.

    Hey LBert7,
    I would try the recommended steps in the following article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • HT2500 Using Mail in System X 5.8 It will not accept attachments (photos, pdf files)

    Using Mail in System X 5.8 It will not accept attachments (photos, pdf files) to send. It was working just fine and after some period of non-use it just stopped accepting attachments to send. The system is all up to date. And, I have the same problem on two different Imacs.

    I had exactly the same problem as arthur1234. I followed his own suggested fix in his post of 10/12/2012 at 9:31 AM.
    His fix worked perfectly. Attachments are now being sent and received as they have been for the last 10 years or so.

  • Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

    Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

    Macintosh HD > Library > Internet Plug-ins
    Look for these two files.
    AdobePDFViewerNPAPI.plugin
    AdobePDFViewer.plugin
    Right click those and select “Move To Trash’.

  • File Browser, properties, library window will not show up

    I'm using an old version of Motion 3 and my File Browser, properties, library window will not show up even when I click on the icons and/or press command+2,3, or 4 . Seems to be some kind of settings glitch as Motion works fine when logged in under another user. Any thoughts.

    schlickler,
    Welcome to Apple Discussions.
    but now I have the preferences folder on my desktop--does that have to stay there?
    No, it can be trashed.
    Plist files contain instructions for recording and executing tasks associated with the the application or function that owns them. They can and do become corrupted. If you look in the username/Library/Preferences Folder you can usually guess what application or function the .plist serves by analyzing the file name. In this case it was the com.apple.iCal.plist file.
    Proper identification of the appropriate .plist file is not always so obvious. When an application malfunctions, removing the associated .plist file from the preferences folder to the Desktop is often the easiest first troubleshooting step. Then log out/in or restart and re-evaluate the performance of the application.
    A new default .plist file is automatically created in your Preferences Folder after you remove the recalcitrant .plist and initiate the log out/in restart sequence. You can expect default application behavior and you will have to reset some preferences. If the application or function returns to normal after removing the .plist file, it will prove that the original file was corrupt, and you can now safely trash the .plist file which you placed on the Desktop.
    If the application or function is unsatisfactory with the new plist file, the original plist file which was placed on the Desktop can be safely returned to the preferences folder. Just allow the system to replace the newer plist.
    If you are having problems with any aspect of OS X, experiment with deleting the appropriate .plist file. Plist corruption is not uncommon and .plist file deletion often cures many problems. Too many users try intricate solutions first and end up complicating their minor problem.
    ;~)

  • HP C3180 will not show up on printer list or set up assistant??

    When I try to add my new HP C3180 all in one printer, it will not show up on the printer list, or in HP set up assistant, and searches for new drivers fails to bring up any printers. My G4 does not seem to recognize the C3180 printer. Looked for updates to software and there are none. HP says I have the latest software. Uninstalled, and reinstalled HP software several times, still will not show up on the add printer list so I am not able to configure it. Previous Deskjet 970CXI printer is also missing which is OK if C3180 would show up. Anyone with any ideas? Thanks.
    G4 AGP Graphics Sawtooth 1.3Ghz   Mac OS X (10.4.7)  
    G4 AGP Graphics Sawtooth 1.3Ghz   Mac OS X (10.4.3)  

    If you are unable to print wirelessly, the comments below enabled me to print via my Airport Extreme. Just go to the "Print & Fax" system preferences, and 'add' a printer, then follow these instructions:
    -You can print using bonjour in a roundabout way. Wireless printing will work if you select "hp photosmart p1000 g-print beta" in the printer browser under the "print using" option in the print and fax control panel. If you choose this option, the computer will think it's hooked up to a p1000. So it will work with airport express!
    This advice was in the customer reviews section of the Apple Store for this printer, where a lot of people were complaining that they couldn't print wirelessly.
    iMac   Mac OS X (10.4.4)  

  • When using designer the form will not show up.

    When I activate the form designer to make it interactive, it will not show the form except momentatily.  Is ther a way to turn it up? 

    David,
    I responded to the forum but could not figure how to send attachments to you there.   This is another try . 
    I scanned a form to PDF that I want to, make interactive and fillable.  In Adobe Acrobat 7 I clicked on Advanced > Forms> Make form Fillable in Adobe Design. The results is a conversion to an unreadable Form.  Checking the PDF preview tab does not help.  Attached are the Form and the enteractive form. 
    Is there any suggestions as to what I am doing wrong?
    Ed Walsh

  • My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    Hey there Kellee,
    It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Start with these three steps, and there are more in the article if you need them.
    1. Update iTunes
    Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
    2. Check the USB cable
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    3. Verify that Apple Mobile Device Support is installed
    iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
    Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
    Reinstall iTunes for Windows XP
    Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
    If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • When I click on pictures in eBay or Facebook. It will not show the pictures....Will work with IE but not FF

    When I click on pictures on eBay and Facebook...it will not show pictures/enlargements...just blanks....will work with IE. NOT ff

    You can use these steps to check if images are blocked:
    *Open the web page that has the images missing in a browser tab.
    *Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    *Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down through the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • VI containing Event Structure will not receive front panel events in LabVIEW Real-Time.

    Hi again, I'm working in my first UI (attached VI).
    It works when running directly from PC. It doesn't when running from cRIO, there's the message "VI containing Event Structure will not receive front panel events in LabVIEW Real-Time". I've been reading and I found that "Event structures on RT targets do not support events associated with user interface objects, such as VI panels or controls. For example, associating the Value Change event with a control does not work. RT targets support only user events".
    Is that the problem? If it is, how can I create Mouse Up, Mouse Enter, Value Change (or other user interface events) user events?
    If I run my VI in FPGA mode should it run?
    Attachments:
    HMI.vi ‏33 KB

    Since it looks like you are new to the whole RT and machine control, I recommend giving this a good read: NI LabVIEW for CompactRIO Developer's Guide
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • My image files will NOT show up when I import them

    I CANNOT see my image files when I import them. This is the case regardless of whether I import them directly from my image files, or from my Flash library. They WILL NOT show up in the stage area, although the panel on the right shows the file! What can I do to correct this? I am using Flash CS4 which I need for my Digital Design classes through the Art Institute of Pittsburgh! I will FAIL this course if I can't get this program to work properly!!

    Here are a few things to check:
    Do you have anything else on Stage that might be covering them up? Is your target layer locked? Is the layer visibility turned off?
    Are you doing this in an existing document, or a brand new document?

  • Add Header Footer page will NOT show 100% horizontally

    Using Acobat X ver 10.1.13 on WIN 8.1 - new install
    when trying to use Add Headers Footers , the page will not show the Right side of the HeadersFooters page (pls see image attached) That is as wide as it will go, even on a large external monitor - so you are unable to enter
    information in the other fields.
    TIA
    Doug

    Post a link to the page please. Did you upload the Scripts
    folder? If not,
    then join the THOUSANDS of others who have made the same
    mistake and gotten
    their comeuppance here on this board.... (hint, hint)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "techmanheffley" <[email protected]> wrote
    in message
    news:g9rumt$p3i$[email protected]..
    > Trying to add a flash file in page. Will not show up on
    website.
    >
    > It works if I do a F12 within dreamweaver (preview in
    browser). But it
    > does not work when I go to my website (tried IE7 and
    Safari)

Maybe you are looking for