Peer to Peer AV issue through Edge

We have a standard edition 2013 FE with a 2010 Edge server,
When users do AV conferencing internally with each other it works fine,
If user A outside the firewall starts an AV conference with user B inside the firewall through the edge server it says that the other user has not enabled or started their video but they have...
Can anyone think why this might be?
we have high bandwidth and this is a test environment so hardly used...
***Don't forget to mark helpful or answer***

Hi,
The ports 50,000-59,999 is between Internet and Edge Server. TCP port range, 50,000-59,999, only needs to be open outbound. TCP/UDP port range, 50,000-59,999, needs to be open inbound and outbound to the Internet for federation with partners running Office
Communications Server 2007.
You can refer to the link of “Port Summary - Single Consolidated Edge with Public IP Addresses”:
http://technet.microsoft.com/en-us/library/jj204756.aspx
And the link of “Microsoft Lync Server 2013 Protocol Workloads Poster”:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=39968
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

  • Goos  issue through MIGO based on work order problems

    Hi All,
    Can any one guide me how to overcome the error"Purchasinh Info record not found in purchasing organisation 2434" while doing Goods(consignment materials) Issue through MIGO transaction based on work order. How to create the Purchase Info record??
    Any pointer from any side  will be highly appreciable...thanks in Advance
    Regards
    Azizur

    Dear Azis,
             Double Click on the serial no of the Component you will get the  inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
    Please recheck again your components.
    Regards,
    Shareeq
    Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM

  • How to re-run output determination after goods issue through idoc

    Hello,
    i've got a question about output determination. We are currently in a process to automate picking, packing and goods issue through a 3rd party software. The software creates DELVRY03-Idocs including picking, packing and goods issue-information. Picking, packing and goods issue work just find and after submitting the idoc, the delivery is updated as needed.
    The problem arises when it comes to printing the shipping document on the printer belonging to the picking station that just processed the delivery. To determine the correct printer, the external software includes the picking station number inside the idoc. A user exit in idoc_input_delivery puts the number (3 digits) into likp-traid. The customizing for using this field inside output determination is complete and seems to be working.
    The problem is: as the number of the picking station is not known before goods issue, the LD00 message must not be generated before goods issue. I used the appropriate condition insinde the message scheme, the message is not generated until goods issue is complete. After processing the DELVRY03-Idoc, the message should be found and generated, but it isn't. When i take a look at the delivery after submitting the idoc, goods issue is complete, picking and packing is done - and no sign of an header message of type LD00. First i thought about a misconfiguration inside my customizing for output determination, but when i access the delivery via vl02n (change delivery), output determination seems to be processed again and without making any changes or actions, LD00 is generated and waiting for processing. After saving the delivery, LD00 is processed and the shipping document is printed exactly where it should be.
    So, as my customizing seems to work and everything else around idoc processing doesn't make any problems either, i conclude that, after processing the idoc, R/3 just needs a little kick to re-run the output determination, find the now fitting condition for LD00, find the appropriate entry in the condition table and print the document.
    I already tried report rsnast00, but this one just seems to run already created messages.
    Any ideas how to automate this little "kick in the butt"?
    Thanks in advance!

    I'm working on a similar issue with ws_delivery_update. I'm not using the IDOC as you are, but I'm using the function in a program of mine to PGI the delivery, but the output isn't being added to the delivery. I've tried to run the function twice as you suggested, but that doesn't seem to work. Do you have any suggestions or ideas on things to try?
    Thanks,
    Eric

  • How can i solve a issue through remeady

    how can i solve a issue through remeady..
    With Regards
    Prasanta

    Hello,
    Remedy and other similar products are the tools which track the Action / Time taken for resolving a call. Normally, once an issue is reported, that will be recorded in a tool with an estimated fix time. If the call is not fixed / actioned within the estimated time, it go as breached.
    The analyst need to update the call status in the tool. They will need to update the actions taken, call notes ..etc. Once the issue is fixed, you may set the call status as resolved. Once you set the status as resolved, the user who riased the issue will get an e-mail. They will confirm whether the issue is actually closed or not. Depends upon their cconfirmation, the status will be set to Closed or again Reopen.
    This is a typical helpdesk tool scenario.
    Prase

  • Multiple RDS Device CALs Issued through Windows 2003 RDS Hosts

    Environment
    Windows 2012 R2 RDS license server issuing device CALs
    5 Citrix farms (PS4, PS4.5, XA5, XA6, and XA6.5) 
    Symptoms
    - RDS device CALs issued through the PS4/Windows 2003 R2 and PS4.5/Windows 2003 R2 servers show the Citrix server name in the Window 2012 R2 RD license manager console instead of the workstation name (See below).
    - The PS4/Windows 2003 R2 and PS4.5/Windows 2003 R2 servers are issuing a large number of device CALs to workstations.  For example, we have two PS4/Windows 2003 R2 servers that publish a single application.  There are 20 users
    of the applications with dedicated workstations that should all have a device CAL, but everyday I see device CALs being issued from these servers (See below).  
    Any help would be greatly appreciated.  Thank you.
     Scott   

    Hi Scott,
    Thank you for posting in Windows Server Forum.
    Have you find any Error\Event Id for this case?
    From the description it appears that there is some misconfiguration for redirecting the server during load balancing the device CAL among the server and that’s why device is getting misplaced. You can please relook at configuration for License server with following
    article.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Lync Sign in issue through Proxy

    Hi All,
    Not to be confused when said Lync Sign in issue through Proxy as it is unlikely that this is an issue with the proxy settings. Find it out yourself from the behavior below.
    It is in fact a weird issue that I have come across.
    Overall there are almost 30 Lync Users accounts.
    And they are trying to authenticate to external Lync Server.
    28/30 works fine through the proxy. Except for 2 user accounts.
    The proxy settings are same for all the users and no individual configurations set.
    Now, here is the interesting part. Go out of the network and authenticate this 2 user account to any of the workstation which is not going through Proxy, it works. Come back to the workstation which is going through the proxy and try again, it will work
    now.
    Now, I am interested in finding how exactly does Microsoft authenticates their Lync users. And what are the step by step procedure of User Authentication for Lync service. And why is this happening?
    Just to add some more point here, these happens only with 2 specific accounts.
    And if you try using these 2 accounts on any of the 28 working workstations, which is going through the proxy, the first time, it would still fail to get authenticated.
    Can someone put a highlight on these behaviors? is there any user specific settings on the lync server?
    Thanks for your inputs.

    You can check the following blogs about Lync authentication process:
    http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
    http://blogs.technet.com/b/nexthop/archive/2012/11/28/lync-2010-client-authentication.aspx
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or
    suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    You can enable Lync client logging to collect the log file to check the sign in process for these two users can’t sign in externally.
    Lisa Zheng
    TechNet Community Support

  • HT201272 Does anyone know how to get an episode of a tv programme that never downloaded when I bought a subscription. Episode 1 didn't download and I have all other episodes. I looked at the issues through report a problem but I cannot find an answer.

    Does anyone know how to get an episode of a tv programme that never downloaded when I bought a subscription. Episode 1 didn't download and I have all other episodes. I looked at the issues through report a problem but I cannot find an answer.
    I bought a series pass and unfortunately epsiode 1 didn't download at all. I was watching the downloads and restarting once they stopped as I allow multiple downloads at athe same time

    It sounds like you may have hidden it, in which case you should be able to unhide it : iTunes Store: Hiding and unhiding purchases. (You can't turn off the hiding of items.)
    But you should be keeping and maintaining a backup copy of all of your downloads and not relying on being able to redownload them - any item could be removed from the store by the rights-holders at any time, if they do then you won't be able to redownload them (nor will be able to do redownload items if you move countries).

  • BGP Peer down monitoring through SNMP Traps

    Hello,
    I'm trying to figure out how I can monitor with BGP peer went down using SNMP traps or any other methods that are out there. Basically I would like to get a trap that tells me the IP address of the peer that went down.
    Looking over the SNMP MIBs for BGP all i can find is snmp traps that tell me there was a change in states in BGP, but don't say which neighbor.
    Is there any way to get such information? Would I have to use EEM with some script? This seems like a very common thing that people would want to know.
    Thank you in advance,
    Tom

    SNMP notifications can be configured on the router and GET operations can be performed from an external management station only after BGP SNMP support is enabled.
    SUMMARY STEPS
    1. enable
    2. configure terminal
    3. snmp-server enable traps bgp [state-changes {[all] [backward-trans] [limited]}] | [threshold prefix]
    4. exit

  • Issues with EDGE connection - Curve 8520

    Hi!!
    I have been having problems with the Blackberry EDGE internet connection on my phone for the past 3 months. I thought it may be a problem with my mobile provider, Yoigo, but they have told me they don't know what's wrong and cannot fix the problem.
    The connection shuts itself off randomly without warning and I no longer receive emails, fb notifications or whatsapp messages. I know that it has stopped because 'EDGE' in the top right hand corner turns to lower case 'edge'. In order to fix it I have found that I have to go to host routing table in options and re-register myself with the Blackberry Internet Service, wait for the message to tell me that I am now registered again and then wait... and wait! Sometimes it comes back after 5 mins, other times I have to re-start the device after 1 or 2 hours.
    Does anyone know how I could fix this issue for good, because this happens at least twice a day now and it's driving me crazy!!
    Appreciate it!! Thanks in advance!
    Laura

    Hi LauraM22
    Welcome to BlackBerry Support Forums
    If your Connection drops frequently then it might a problem with your Carrier Network , but still you can perform those steps in a sequence  :
    1- Register your Handheld .
    KB00510 : How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    2- Delete and Resend your Service Book
    KB05000 : Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 : Send the service books for the BlackBerry Internet Service
    ( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
    3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
    Try it and see if that helps , If problem still Continues then to rule out any software issue you can Reload your device Software , to do that first do a backup of your device using Desktop Software , once it is done you can reload your Device OS , for help refer to this KB :
    KB03621 : How to Reload BlackBerry Device Software and application using BlackBerry Desktop Software
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

  • Goods issue through PI sheet

    Gurus,
    I am facing a strange problem. I am trying to issue components through PI sheet. I have used almost all the standard characteristics (such as cons_1, cons_2, cons, cons2 etc.). But everytime I try to issue the material I find that the header material is being issued not the components (I find this in CO54). The problem I guess lies in the characteristics PPPI_MATERIAL (whose function module is COC1_PPPI_CHAR_VALUES). Has anybody else faced this problem? Please let me know if you people have any solution or feel that I am making some mistakes...
    thanks is advance!
    Snigdho

    Hi,
    Problem solved!! generation scope was 0 instead of 1.

  • Onedrive (Skydrive) Sync issues through TMG

    We are having a ton of issues when using Onedrive (skydrive) to sync document libraries with our SharePoint 2013 server behind Forefront TMG. Users will randomly stop syncing (with no errors on skydrive), or files will just sit there trying to upload. I
    checked the logs on forefront, and see the following error occurring quite often for the document libraries the users are trying to sync.
     12210 An Internet Server API (ISAPI) filter has finished
    handling the request. Contact your system administrator.
    We have an array of TMG servers that use FBA for authentication on the front end, then delegate using NTLM to the sharepoint server. The array is also setup as a reverse proxy, and is the only way the sharepoint server can reach the internet. We are using
    the external host name (portal.domain.com) from TMG's internal adapter to the sharepoint server, so it's not a mapping issue. It's also happening on images and files that are less than 100KB, so it's not a size issue either.
    I have tried disabling the malware filter completely, but the error still occurred. This is happening to multiple users running both windows 7/8.

    I have no way to test this as our sharepoint server is in a remote datacenter, with no access except through TMG.
    I did however get rid of the error by changing the authentication delegation method from NTLM to Basic. Since making the change, I have not seen any instances of the 12210 error for any users through TMG. So far I have no gotten any complaints/issues since
    making the change.
    So it looks like TMG cannot properly handle using NTLM to delegate the credentials. This is the second time I have run into an issue where this was the cause, and changing to Basic was the fix (Completely separate issue with TMG/IIS 8 using Ajax. Changing
    to basic was the solution given by MS support)... It's pretty dumb that a Microsoft security product can't properly handle windows authentication on the back end....

  • Activation failure - Requesting I need to activate Photoshop CS5.1 despite having done this previously & used Photoshop. Adobe can't connect to internet to activate, yet program is allowed through Firewall and not having connectivity issues through Browse

    Hi,
    I currently have Photoshop CS5.1 on Windows 7 (64 bit) and it's now requesting I need to re-activate it, despite having already done this with a serial number when I installed it and even used the program numerous times.
    I get a screen saying "Product activation is required" but every time I try to activate it, it says there was a connection issue and asks me to connect to the internet.
    I've checked my firewall settings and Adobe is allowed through. No connection issues using my Browser, Skype etc.
    Anyone got any solutions?
    Thanks,
    Westy

    Sign in, activation, or connection errors | CS5.5 and later

  • Glitches and Load Speed Issues with Edge Animate Site

    I recently created a website at www.goshowpro.com and am having some glitches and load issues occur and would appreciate any help or insight into the matter. The site loads relatively quickly on my computer and my hosting servers technical support system but when I show it to my client it takes anywhere from 15-20 seconds, even after I have cleared the cache and cookies. All my image files are 'gifs' as to alleviate memory usage and I don't know what else to do that I haven't tried yet. Additionally, when you go to the services page from the about page, the light beams don't connect to the lighting fixtures and the text is placed differently than what I initially had in Adobe Edge Animate before I published the files. And the facebook link doesn't go to facebook but to www.goshowpro.com/facebook.... (ie I get a 404 error) even though in the program I have the link set as www.facebook.com....  I don't know what else to do besides what I have been doing and would very much appreciate any insight into these issues.
    I should also mention that I used more html files than I initially planned due to lack of support on creating complete animation functionality with Edge Animate. I would like to have everything on one page but I don't know if that would be possible with the current version of Adobe Edge Animate (1.0.1.204.22434). Thank you again for your help.
    Mike

    Hi, Mike-
    Have you tried profiling?  You can use Firefox's Firebug or Google Chrome Inspector to see what's taking so long to download.
    http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/
    -Elaine

  • Transfer Posting Issue through MB1B

    Hi,
    We have a requirement that During Transfer Posting of Material through MB1B transaction, User should be able to transfer the Stock within SAME Material Code (From Material A to Material A, but in diff. Plant)...
    If User want to Transfer the Stock of A Material to B Material, system should not allow the same...
    Please guide...

    SAP~MM wrote:
    > But If, we want to Transfer the Stock to another Plant with same material code, then by which movement type we can do it..
    >
    > Please guide...
    MVMT type : 301 Transfer posting plant to plant in one step
    The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
    Possible special stock indicators: O, V, W
    MVMT type : 303 Transfer posting plant to plant in two steps - removal from storage
    The quantity is transferred from unrestricted-use stock of the issuing plant to stock in transfer in the receiving plant.
    For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split-valuation materials.
    Removal from storage can be posted via an SD delivery.

Maybe you are looking for