Goos  issue through MIGO based on work order problems

Hi All,
Can any one guide me how to overcome the error"Purchasinh Info record not found in purchasing organisation 2434" while doing Goods(consignment materials) Issue through MIGO transaction based on work order. How to create the Purchase Info record??
Any pointer from any side  will be highly appreciable...thanks in Advance
Regards
Azizur

Dear Azis,
         Double Click on the serial no of the Component you will get the  inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
Please recheck again your components.
Regards,
Shareeq
Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM

Similar Messages

  • Migo based on sales order error -Require CO object

    Dear Experts,
    We have one process,
    Where we are creating sales order and based on sales order, we are doing migo and miro. final entry will be consumption a/c dr to vendor then we are doing billing for the same.
    We got error in migo based on sales order stated that 'please enter co account assignment object.
    where i will cpature this cost on sales order or cost center.
    I think must be part of sales order becoz we are doing consumption based on sales order and revenue and csot must be flow to copa in billing. M i correct?
    If cost object is sales order or PSG in migo? what setting need to be done for the same.
    What will be the ideal process for the same.
    regards
    RR

    hi ajay,
    I have used AAC -X with item category 's' for third party that was suggested by sap
    and the gl i have defined in okb9 with PSG tick.So consumption account linked to my PSG. becoz i m doing migo/miro based on sales order and final entry will be consumption a/c to vendor in my case.
    System will determine PSG in migo and then billing will happened for the same.So my cost and revenue will flow to COPA.
    We have one programme SDVPRSUPDATE that need to execute every monthend.In order to flow cost to COPA for some cases where Billing happened but no GR happened for the same.then this prograame will flow VPRS cost to COPA.
    regards
    RR

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • MCEKPO-MENGE issue through 2LIS_02_ITM for Statistical Purchase Order Items

    Hello Everyone,
    I have come across this strange scenario where a given Purchase Order Item in the Source system - SAP R/3 has been changed in the following sequence,
    1. First the PO Item was marked as a Deleted PO - LOEKZ = L which set the STAPO = X (Statistical) and
    2. The Deletion Indicator was removed for the PO Item which means LOEKZ now is not having "L" and the STAPO also has been removed.
    Due to the above scenario, now the Order Quantity in the SAP BW system has 0 as the value whereas the Quantity in the SAP R/3 System shows up as 1.
    I was curious to know if there are any OSS Notes or processes in place to avoid this from happening. As I searched the forum and service place for the OSS notes related to this issue and could not find anything related.
    The Order Quantity in our system is extracted from 2LIS_02_ITM (MCEKPO-MENGE) field.
    Thanks in advance for the help.
    Dharma.

    hi Dharma..
    Did you find a solution for this post?
    I Have similar issue....
        I Have an issue (I think is issue)...with extractor 2LIS_02_ITM about reversal or deleted indicator….
    Some PO are created on R/3 and mark for deleted some line items… I try or I hope  received a “R” indicator…. But I didn´t receive the indicator…..
         I only receive “X” on this field.. (delete indicator). or in other examples  blank on this field
        What’s the difference between “X” , “R” and blank indicator?... when is posible receive X, R or blank value??
        I was thinking that when on R/3 some lines of PO orders were deleted.. I receive "R" indicator when I extract to  BW (on the PSA)... but I didn't...
       If you know how work this kind of cases or examples, please explain me more.. or let me know where can I find more information please.
        I will assign points to all the answer.
       Thank you
    Alice

  • MIGO,PO,PR, Sales order Problem

    Sir i am working in an pharmicitical company .In my existing company before saving any MIGO ( GRN,Goods issue ),PO,PR, Sales order we first have to take approval from manignment ( authorised pearson ) ,if they suggest any corrections according to that we have to change our proposal.In SAP i expect that before saving any of above document system should ask for administrative approval .
                                       Plz forward me any setting from which i will be abe to satisfy my above requirement.

    Hi,
    In SAP all external purchasing documents (PO/Contract/ Scheduling agreement ) can have multiplevel Approvals or Release Strategy
    Documents like GR / GI don't have any such arrangements, as they are internal documents and are controlled through User authorization only.
    Sales Order can't have Approvals like PO but have approvals through user authorization contols
    If u need further info on PO approval settings, pls reply back
    Hope this helps
    Regards
    Dheeraj

  • Work Order Problem

    Hello,
    I open trransaction IH01. Entered Functional location ABCD and then select equipment number 1234567 from structure.
    Then from top clicked on GOTO and create order.
    IH01 Screen is opened: I enterd the details like 1) Order Type:- PM03 ( General) 2) Priority- Safety and 3) Planning plant
    Functional location and equipment is picked.
    After that i enter the description and i can see other details are filled already like plant control key , activity type.  I release order and save. Order Gets generated.
    Then 2nd time for same functional location and equipment in IH01 i click on GOTO and create order. Enter initial details again on front screen like order type , priority and Plant. Then i see that other details are not picked this time like control key , activity type and i can not save the order.
    Then 3rd time when i tried is picking again and fourth time not.... Did not able to undestand behaviour why this happens?
    Let me know if any info required.
    Regards
    Himanshu

    Hello,
    Thanks alot for prompt reponse
    But for the first time its picking up work centre. If its deleted then it should not pick up for first time itself.
    Second time same steps but not picking up and its asking me to enter the details. Then again 3rd time picking up 4th time not .. 5th time pciked up and 6th not..
    Stepr are same
    Thats IH01>enter functional location>select equipment>GOTO>create order>enter details on first screen and enter> work centre etc were present already>just save and order created.
    Regards
    Himanshu

  • RE: Goods issue posting through Migo for Production Order

    I have released the production order, when I want to post the goods issue through migo to the concerned order I am getting error saying that material "No components exist but there was stock in the storage location for unresticted use.
    I have checked through MMbe transaction.

    Are there components in the Production Order? If yes, is the reservation created and movement allowed for the reservation?
    Lakshman

  • Final issue indicator on the general data button on the work order

    Hi Gurus,
    can anybody please let me know why the final issue check box is checked automatically even before the goods are issued via migo against the work orders. This check box is on the general data tab of the material entered on the components tab of the work order. Please help. As a result of this, the store room clerk cannot issue the material againsth the work order, because this check mark is checked. I want to understand what is causing the check mark to be checked automaticallu even before tthe materials are issued out
    Thanks
    ANusa

    Hello!
    This might have occured due to completion confirmation of order before goods issue. Generally this happens if final issue indicator is set as default in completion confirmation tab. Please check and reply if problem is something else.
    Regards,
    Vaibhav Mishra
    Edited by: Mishra_Vaibhav on Jan 27, 2011 5:23 AM

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • SAP Printers and Mass Printing of SAP Work Orders

    Good day Experts,
    We have a printer related issue especially mass printing of Work Orders. We have discovered that printing a list
    of work orders takes longer with intervals of 10min up to an hour, as compared to printing smaller list(1-5 etc)
    We are not certain whether this problem originates from the Network or SAP. The problem is not one of uniform nature,
    changes frequently, Sometimes better and sometimes worse.
    Please advise me.
    Thank you.
    Regards,
    Sibusiso

    hi,
    There could be many reason behind this
    1. Logic put to fetch data without key fields
    2. unwanted code
    3. Using System status search
    4. getting data from User status tables such as JCDS
    just check by giving print with one order, even if it results in performance issues, then it requires Fine tuning
    you have to check with developer to removed unwanted code
    regards,
    santosh

  • Interest not calculating on work orders

    Hello,
    We have an issue with interest calculation on work orders in the
    There is a work order on which monthly interest is
    not calculating any more even though there is balance left with the
    order.
    The interest got calculated till May,2011, but after that interest
    calculation got stopped.There is no investment profile is maintained in
    the WBS element to which this order is linked.
    Please advise.
    Thanks & Regards,
    Tapan Patro

    Hi,
    Check the change documnets (CN60) for the WBS to see if the interest profile was removed. If yes, populate the appropriate profile and try the interset calculation again for the WBS.
    regards
    Sreekanth

  • Delete a Work order in REL status

    Hello,
    I have created a wrok order which is in released REL status. I want to delete the work order (deletion flag set), but when I go to functions ---> delete, it is not active. Is there any way I can delete the work order? I have not done goods issue, labour confirmation to the work order.
    Prasanth

    hi
    since you are not performing any further transactions for your order ,just TECO the work order and also Business completion of the order
    then you can set the deletion flag for your order
    Also refer the following link for [Check Criteria for Setting the Deletion Flag|http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm]
    regards
    thyagarajan
    Edited by: thyagarajan krishnamurthy on Jun 26, 2008 9:18 AM

  • Work Order Serialized Component Reservation

    Can I enter a serialized part on a Work Order?  We are a manufacturing company and have many parts in Stores that we plan to serialize.  When a part (eg. motor) on the shopfloor breaks a Work Order will be written to replace the motor with a refurbished, serialized one in Stores.  I need to be able to issue that part.   The Work Order let me enter it under Components, but when I ran MB26 to release the reservation and Issue the part, it said I needed to enter a Serial Number.  However, there's no where on MB26 or on IW31/IW32 to enter a Serial Number.  Where's the right place and/or what's the right process for this?

    Hello Kris,
    If I understand you correctly, you are looking for a field to enter serial number in work order, if so, then please configure the subscreen of reference object.
    SPRO
      -> Plant Maintenance and Customer Service
       -> Maintenance and Service Processing
         -> Maintenance and Service Orders
          -> Functions and Settings for Order Types
    Configure Order Types
    in the bottom of screen in detial order type, there is a field Screen RefObject
    you can select reference object screen which contains serial number field.
    Regards,
    Jane

  • Delete Work Order

    Hello,
    I have created a wrok order which is in released REL status. I want to delete the work order (deletion flag set), but when I go to functions ---> delete, it is not active. Is there any way I can delete the work order? I have not done goods issue, labour confirmation to the work order.
    Prasanth

    Anil Kumar,
    That's what it says [here|http://help.sap.com/erp2005_ehp_03/helpdata/EN/8d/3e65a0462a11d189000000e8323d3a/frameset.htm]
    PeteA

  • Excel attachment opening blank in work order

    Hi Experts,
    I am having an issue with Excel attachment in work order.
    there has been some coding done using open dataset ,readdataset etc.
    I am using read in text mode .....
    the file is being picked from Application server and someone told me that there is no way that SAP can support
    the Excel attachment that is uploaded from Appication server.
    Kindly suggest on this . I tried by saving it as CSV file but the format was incorrect.
    Please suggest me how we can open the excel  file correctly.
    Thanks,
    Pradeep.

    You need to use the Open In... feature to view it in Excel.
    Once the attachment is open in the default viewer, you should have an icon that looks like a square with an up arrow on it. Tap on this, then choose Open In... and you should be able to open it in Excel.
    ~Lyssa

Maybe you are looking for

  • Expanding text fields for printing

    I have created my first form and saved it as a pdf.  in general it looks good but even though the text fields are expandable and grow I can't see all of the text once the form is printed.  What can I do? Is there a setting somewhere I am not aware of

  • How do I copy my entire iTunes library to a flash drive

    I am attempting to copy my itunes music to a flash drive by dragging and dropping the entire itunes folder to the flash drive, but it will not transfer.

  • File name gets converted to upper case

    I am facing an unusual problem with Solaris 10. When I insert an USB thumb drive formatted with FAT to copy some file from the stick, some of the files whatever gets copied to hard disk get their file names changed to upper case. This is quite random

  • Rate contract for the freight payment

    Hi, I have a scenario. The freight vendor is different than the PO vendor. The vendor is specified for the freight condition in the PO. the rate contract is created for the freight vendor in the system. How do I make the Invoice, I have the service c

  • Regarding extract structures.

    Can anyone please let me know of extract structures of finance module or for accounting., as at interview asking extract names, can anyone share if had any document.           Thanks in advance.