Performance tab disabled in Grid Control

Enterprise manager tab performance is disabled in Grid Control. How to enable it?
Regards,
dba

Hi,
This is because your management packs were disabled, You can enable these management pack - "DIAGNOSTIC" pack to get this performance tab.
The following document, helps you to navigate to the location where you can enable /disable the packs.
http://www.oracledistilled.com/grid-control/disabling-access-to-management-packs-in-oracle-enterprise-manager-11gr1-grid-control/
Best Regards,
Venkat

Similar Messages

  • Performance tab in Cloud Control 12c

    Hi guyz,
    How can I activate Performance tab in EM Cloud Control 12c? Do I need any license or is there light version?
    In Grid Control 11g it was easy to activate.
    Thank you beforehand.

    Could you please confirm the Database Diagnostic Pack and Oracle Tuning Pack is enabled for the database.
    From the Setup -> Management Pack -> Management Pack Access
    To enable the Management Pack for Oracle Database:
         From the Setup menu, select Management Packs, then select Management Pack Access.Enterprise Manager Cloud Control displays the Management Pack Access page.
    In the Management Pack Access page, from the Search list, select Database  ===>  It will lists all the Oracle Database targets being monitored.
    From the table, for the select  your Oracle Database target and enable the Oracle Diagnostics Pack, Oracle Database Tuning Pack and click Apply.
    For licensing information on the Oracle Diagnostics Pack and Oracle Tuning Pack
    Ref to:
    http://docs.oracle.com/cd/E24628_01/doc.121/e24474/toc.htm
    Understanding the Management Packs in Enterprise Manager (dbconsole, grid control and cloud control) (Doc ID 1566956.1)

  • Enterprise Manager "Performance" tab is suddenly disabled.

    I've been logging onto Enterprise manager using the same credentials for months with
    no problem. Today I logged in and I suddenly can't access the performance tab
    on EM. I usually logon as sys as sysdba.
    I DID change some DB init. parameters, increasing the number of processes and cursor resources but that's it.
    Why is my "Performance" tab disabled now ?
    How can I get it back ?

    Try logging into your OEM again.
    Then go to 'setup' in your upper right corner.
    Once in the setup screen, go to the left border menu and select "Management Pack Access".
    Take a look if you have a check in the box for 'Database Diagnostic', and one for 'Database Tuning'

  • Windows external authentification in grid control

    I am currently facing this error when i try to connect to a windows database for "performance information tab" through a grid control installed on a linux platform :
    "Io exception: The Network Adapter could not establish the connection"
    The sqlnet.ora on the windows platform has the following content :
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    The listener.ora on the windows platform has the following extra content to be able to log errors :
    LOGGING_LISTENER = ON
    TRACE_LEVEL_LISTENER = ADMIN
    I tried to use many accounts that are in the "ora_dba" group but i get the previous error.
    Below an extract of the listener.trc file generated when i try to connect :
    TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production on 19-AUG-2008 10:47:17
    Copyright (c) 1991, 2006, Oracle. All rights reserved.
    [19-AUG-2008 10:47:17:611] --- TRACE CONFIGURATION INFORMATION FOLLOWS ---
    [19-AUG-2008 10:47:17:611] New trace stream is E:\softz\oradb.1020\products\network\trace\listener.trc
    [19-AUG-2008 10:47:17:611] New trace level is 6
    [19-AUG-2008 10:47:17:611] --- TRACE CONFIGURATION INFORMATION ENDS ---
    [19-AUG-2008 10:47:17:611] --- PARAMETER SOURCE INFORMATION FOLLOWS ---
    [19-AUG-2008 10:47:17:611] Attempted load of system pfile source E:\softz\oradb.1020\products\network\admin\listener.ora
    [19-AUG-2008 10:47:17:611] Parameter source loaded successfully
    [19-AUG-2008 10:47:17:611]
    [19-AUG-2008 10:47:17:611] Attempted load of command line source
    [19-AUG-2008 10:47:17:611] Parameter source was not loaded
    [19-AUG-2008 10:47:17:611]
    [19-AUG-2008 10:47:17:611] -> PARAMETER TABLE LOAD RESULTS FOLLOW <-
    [19-AUG-2008 10:47:17:611] Successful parameter table load
    [19-AUG-2008 10:47:17:611] -> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
    [19-AUG-2008 10:47:17:611] LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = RMFRSMHA083)(PORT = 1521)) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))))
    [19-AUG-2008 10:47:17:611] LISTENER1020 = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = RMFRSMHA083)(PORT = 1521)) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))))
    [19-AUG-2008 10:47:17:611] LOGGING_LISTENER1020 = OFF
    [19-AUG-2008 10:47:17:611] TRACE_LEVEL_LISTENER1020 = ADMIN
    [19-AUG-2008 10:47:17:611] SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (ORACLE_HOME = E:\softz\oradb.1020\products) (SID_NAME = DBATSTD)) (SID_DESC = (ORACLE_HOME = E:\softz\oradb.1020\products) (SID_NAME = DBATSTS)))
    [19-AUG-2008 10:47:17:611] TRACE_LEVEL_LISTENER = ADMIN
    [19-AUG-2008 10:47:17:611] SID_LIST_LISTENER1020 = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = e:\softz\oradb.1020\products) (PROGRAM = extproc)))
    [19-AUG-2008 10:47:17:611] LOGGING_LISTENER = ON
    [19-AUG-2008 10:47:17:611] --- PARAMETER SOURCE INFORMATION ENDS ---
    [19-AUG-2008 10:47:17:611] --- LOG CONFIGURATION INFORMATION FOLLOWS ---
    [19-AUG-2008 10:47:17:611] Log stream will be "E:\softz\oradb.1020\products\network\log\listener.log"
    [19-AUG-2008 10:47:17:611] Log stream validation requested
    [19-AUG-2008 10:47:17:611] Log stream is valid
    [19-AUG-2008 10:47:17:611] --- LOG CONFIGURATION INFORMATION ENDS ---
    [19-AUG-2008 10:47:17:611] nlstdipi: entry
    [19-AUG-2008 10:47:17:611] nlstdipi: exit
    [19-AUG-2008 10:47:17:611] nsglldprm: Resolved "INBOUND_CONNECT_TIMEOUT_LISTENER" to: 60
    [19-AUG-2008 10:47:17:611] nsglldprm: Resolved "STARTUP_WAIT_TIME_LISTENER" to: 0
    [19-AUG-2008 10:47:17:611] nsglldprm: LocalOSauth enabled
    [19-AUG-2008 10:47:17:611] nsinherit: doing connect handshake...
    [19-AUG-2008 10:47:17:642] nsc2addr: (ADDRESS=(PROTOCOL=beq))
    [19-AUG-2008 10:47:17:642] nlpcaini: entry
    [19-AUG-2008 10:47:17:642] nlpcaini: No process parameters set
    [19-AUG-2008 10:47:17:642] nlpcaini: exit
    [19-AUG-2008 10:47:17:642] nsinh_hoff: inheriting the connection...
    [19-AUG-2008 10:47:17:642] nsmal: 772 bytes at 0xfdf9a8
    [19-AUG-2008 10:47:17:642] nsmal: 1644 bytes at 0xfdfcb8
    [19-AUG-2008 10:47:17:642] nsmal: 84 bytes at 0xfe0428
    [19-AUG-2008 10:47:17:642] nsopen: opening transport...
    [19-AUG-2008 10:47:17:642] ntpcon: entry
    [19-AUG-2008 10:47:17:642] ntpcon: toc = 6
    [19-AUG-2008 10:47:17:642] ntpcon: exit
    [19-AUG-2008 10:47:17:642] ntpcon: entry
    [19-AUG-2008 10:47:17:642] ntpcon: toc = 4
    [19-AUG-2008 10:47:17:642] sntpinherit: entry
    [19-AUG-2008 10:47:17:642] sntpinherit: Attempting to make pipe \\.\PIPE\ORANTP744.4C8.w
    [19-AUG-2008 10:47:17:642] sntpinherit: Listening on pipe \\.\PIPE\ORANTP744.4C8.w
    [19-AUG-2008 10:47:17:642] sntpinherit: Attempting to make pipe \\.\PIPE\ORANTP744.4C8
    [19-AUG-2008 10:47:17:642] sntpinherit: Listening on pipe \\.\PIPE\ORANTP744.4C8
    [19-AUG-2008 10:47:17:642] sntpinherit: Successfully established pipe 256 to parent.
    [19-AUG-2008 10:47:17:642] sntpinherit: Successfully established pipe 252 to parent.
    [19-AUG-2008 10:47:17:642] sntpinherit: exit
    [19-AUG-2008 10:47:17:642] ntpcon: NT layer IPC connection has been established.
    [19-AUG-2008 10:47:17:642] ntpcon: exit
    [19-AUG-2008 10:47:17:642] nsopen: transport is open
    [19-AUG-2008 10:47:17:642] nsoptions: lcl[0]=0x0, lcl[1]=0x10000000, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
    [19-AUG-2008 10:47:17:642] nsoptions: lcl[0]=0xf4ffefff, lcl[1]=0x10000000, gbl[0]=0x78bf, gbl[1]=0x0
    [19-AUG-2008 10:47:17:642] nsnainit: inherit
    [19-AUG-2008 10:47:17:642] nsnasvnainfo: NA disabled for this connection
    [19-AUG-2008 10:47:17:642] nainit: entry
    [19-AUG-2008 10:47:17:642] nagblini: entry
    [19-AUG-2008 10:47:17:642] nau_gin: entry
    [19-AUG-2008 10:47:17:642] nau_gparams: entry
    [19-AUG-2008 10:47:17:642] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
    [19-AUG-2008 10:47:17:642] nam_gbp: Parameter not found
    [19-AUG-2008 10:47:17:642] nau_gparams: Using default value "FALSE"
    [19-AUG-2008 10:47:17:642] nau_gslf: entry
    [19-AUG-2008 10:47:17:642] nam_gic: entry
    [19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
    [19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
    [19-AUG-2008 10:47:17:642] nam_gic: Found 0 items
    [19-AUG-2008 10:47:17:642] nam_gic: exit
    [19-AUG-2008 10:47:17:642] nau_gslf: Using default value "all available adapters"
    [19-AUG-2008 10:47:17:642] nauss_set_state: entry
    [19-AUG-2008 10:47:17:642] nauss_set_state: exit
    [19-AUG-2008 10:47:17:642] nau_gslf: exit
    [19-AUG-2008 10:47:17:642] nau_gparams: exit
    [19-AUG-2008 10:47:17:642] nau_gin: exit
    [19-AUG-2008 10:47:17:642] nagblini: exit
    [19-AUG-2008 10:47:17:642] na_saveprot: entry
    [19-AUG-2008 10:47:17:642] na_saveprot: exit
    [19-AUG-2008 10:47:17:642] nacomin: entry
    [19-AUG-2008 10:47:17:642] nas_init: entry
    [19-AUG-2008 10:47:17:642] nas_init: exit
    [19-AUG-2008 10:47:17:642] nau_ini: entry
    [19-AUG-2008 10:47:17:642] naugcp_get_connect_parameters: entry
    [19-AUG-2008 10:47:17:642] nauss_set_state: entry
    [19-AUG-2008 10:47:17:642] nauss_set_state: exit
    [19-AUG-2008 10:47:17:642] naugcp_get_connect_parameters: exit
    [19-AUG-2008 10:47:17:642] nau_gettab: entry
    [19-AUG-2008 10:47:17:642] nau_gettab: exit
    [19-AUG-2008 10:47:17:642] nau_sini: entry
    [19-AUG-2008 10:47:17:642] nau_sini: exit
    [19-AUG-2008 10:47:17:642] nau_ini: exit
    [19-AUG-2008 10:47:17:642] naeeinit: entry
    [19-AUG-2008 10:47:17:642] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
    [19-AUG-2008 10:47:17:642] nam_gbp: Parameter not found
    [19-AUG-2008 10:47:17:642] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
    [19-AUG-2008 10:47:17:642] nam_gnsp: Parameter not found
    [19-AUG-2008 10:47:17:642] naequad: Using default value "ACCEPTED"
    [19-AUG-2008 10:47:17:642] nam_gic: entry
    [19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
    [19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
    [19-AUG-2008 10:47:17:642] nam_gic: exit
    [19-AUG-2008 10:47:17:642] naesno: Using default value "all available algorithms"
    [19-AUG-2008 10:47:17:642] naeshow: entry
    [19-AUG-2008 10:47:17:642] naeshow: exit
    [19-AUG-2008 10:47:17:642] naeeinit: exit
    [19-AUG-2008 10:47:17:642] naecinit: entry
    [19-AUG-2008 10:47:17:642] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
    [19-AUG-2008 10:47:17:642] nam_gnsp: Parameter not found
    [19-AUG-2008 10:47:17:642] naequad: Using default value "ACCEPTED"
    [19-AUG-2008 10:47:17:642] nam_gic: entry
    [19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
    [19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
    [19-AUG-2008 10:47:17:642] nam_gic: exit
    [19-AUG-2008 10:47:17:642] naesno: Using default value "all available algorithms"
    [19-AUG-2008 10:47:17:642] naeshow: entry
    [19-AUG-2008 10:47:17:642] naeshow: exit
    [19-AUG-2008 10:47:17:642] naecinit: exit
    [19-AUG-2008 10:47:17:642] nadisc: entry
    [19-AUG-2008 10:47:17:642] nacomtm: entry
    [19-AUG-2008 10:47:17:642] nacompd: entry
    [19-AUG-2008 10:47:17:642] nacompd: exit
    [19-AUG-2008 10:47:17:642] nacompd: entry
    [19-AUG-2008 10:47:17:642] nacompd: exit
    [19-AUG-2008 10:47:17:642] nacomtm: exit
    [19-AUG-2008 10:47:17:642] nas_dis: entry
    [19-AUG-2008 10:47:17:642] nas_dis: exit
    [19-AUG-2008 10:47:17:642] nau_dis: entry
    [19-AUG-2008 10:47:17:642] nau_dis: exit
    [19-AUG-2008 10:47:17:642] naeetrm: entry
    [19-AUG-2008 10:47:17:642] naeetrm: exit
    [19-AUG-2008 10:47:17:642] naectrm: entry
    [19-AUG-2008 10:47:17:642] naectrm: exit
    [19-AUG-2008 10:47:17:642] nagbltrm: entry
    [19-AUG-2008 10:47:17:642] nau_gtm: entry
    [19-AUG-2008 10:47:17:642] nau_gtm: exit
    [19-AUG-2008 10:47:17:642] nagbltrm: exit
    [19-AUG-2008 10:47:17:642] nadisc: exit
    [19-AUG-2008 10:47:17:642] nainit: exit
    [19-AUG-2008 10:47:17:642] nsnainit: NS Connection version: 313
    [19-AUG-2008 10:47:17:642] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
    [19-AUG-2008 10:47:17:642] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    [19-AUG-2008 10:47:17:642] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    "and" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    ------------------------------------------------------------------------------------------------------------------------

    On your WIindows NT server your AGENT is going to be on, you are required to specify the HOSTNAME.
    The listener.ora configuration file uses a fully qualified hostname. Open a command prompt and issue a ping to display the fully qualified DNS host.
    You want that to be the HOST= value in the listener.ora and the HOSTNAME of your AGENT.
    When you install the AGENT you will be prompted for the OMS hostname and port (like a TNS string) for your Linux 64bit Management Server box.

  • Performance tab

    Does anyone have a screen shot of the PERFORMANCE tab for 11g database control?
    Couldn't find one online.

    Hi,
    Then I think you need to download more of the Internet to your PC :-)
    If I use Google, as http://www.lmgtfy.com/?q=oracle+database+control+performance+tab then under the Google "Images" Tab there are lots of screenshots with the performance tab, along with the websites where they can be found like here: http://docs.oracle.com/html/B14338_02/admin.htm
    However:
    If you use Database Control on a Standard Edition database I'm wondering if the Performance Tab is actually shown.
    In 11G Grid Control it is only available for Enterprise database WITH the Diagnostic Pack installed. For all other databases it is turned off.
    And yes, I know you can turn it on, but then you're violating your license. Be aware of that !!!
    Anyway, I doubt if you really, really searched online
    Success!!
    FJFranken

  • Problem setting up the Software Library in Grid Control

    Hi,
    I installed Grid Control version 10.2.0.2 and patched it to 10.2.0.4 (on Win2003 Server Enterprise Edition 32 bit). After the installation i was advised to configure/add the software library. So i did as it was specified:
    "To configure the Software Library, click on the 'Provisioning' sub-tab and set the path for the Software Library from the 'Administration' page. After setting the path, run the following command from any one of the OMShosts: "${OMS_ORACLE_HOME}/bin/PARDeploy -action deploy -parDir ${OMS_ORACLE_HOME}/sysman/prov/paf -force" on Unix, or "${OMS_ORACLE_HOME}\bin\PARDeploy.bat -action deploy -parDir ${OMS_ORACLE_HOME}\sysman\prov\paf -force" on Windows."
    The problem is that when i set the path under the 'Provisioning', i get the following message:
    Successfully added Software Library Directory :
    C:\OracleOEM\swlib\, but Par files deployment failed
    And if i run the PARDeploy script, i get the following error:
    SQL> DECLARE
    ERROR at line 1:
    ORA-00001: unique constraint (SYSMAN.MGMT_PAF_APPS_UNIQ) violated
    ORA-06512: at "SYSMAN.MGMT_PAF_UTL", line 234
    ORA-06512: at line 4
    No errors.
    SQL>
    PL/SQL procedure successfully completed.
    SQL>
    PL/SQL procedure successfully completed.
    SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    16 [main] DEBUG oracle.sysman.eml.swlib.DBEntity - SWLIB error=ORA-01400: cannot insert NULL into ("SYSMAN"."MGMT_SWLIB_DIRECTORI
    ES"."NAME")
    ORA-06512: at "SYSMAN.MGMT_SWLIB", line 1097
    ORA-06512: at line 1
    java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSMAN"."MGMT_SWLIB_DIRECTORIES"."NAME")
    ORA-06512: at "SYSMAN.MGMT_SWLIB", line 1097
    ORA-06512: at line 1
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:184)
    at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:873)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3076)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4273)
    at oracle.sysman.eml.swlib.DBEntity.insertDirectory(DBEntity.java:526)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.saveDirectory(LibraryServiceImpl.java:742)
    at oracle.sysman.eml.swlib.xml.XMLLoader.retrieveDirectory(XMLLoader.java:364)
    at oracle.sysman.eml.swlib.xml.XMLLoader.processEntity(XMLLoader.java:178)
    at oracle.sysman.eml.swlib.xml.XMLLoader.process(XMLLoader.java:148)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.importEntities(LibraryServiceImpl.java:398)
    at oracle.sysman.pp.paf.par.PARFile.executeSwlib(PARFile.java:978)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:951)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:821)
    at oracle.sysman.pp.paf.par.Main.uploadPar(Main.java:238)
    at oracle.sysman.pp.paf.par.Main.main(Main.java:144)
    java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSMAN"."MGMT_SWLIB_DIRECTORIES"."NAME")
    ORA-06512: at "SYSMAN.MGMT_SWLIB", line 1097
    ORA-06512: at line 1
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:184)
    at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:873)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3076)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4273)
    at oracle.sysman.eml.swlib.DBEntity.insertDirectory(DBEntity.java:526)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.saveDirectory(LibraryServiceImpl.java:742)
    at oracle.sysman.eml.swlib.xml.XMLLoader.retrieveDirectory(XMLLoader.java:364)
    at oracle.sysman.eml.swlib.xml.XMLLoader.processEntity(XMLLoader.java:178)
    at oracle.sysman.eml.swlib.xml.XMLLoader.process(XMLLoader.java:148)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.importEntities(LibraryServiceImpl.java:398)
    at oracle.sysman.pp.paf.par.PARFile.executeSwlib(PARFile.java:978)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:951)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:821)
    at oracle.sysman.pp.paf.par.Main.uploadPar(Main.java:238)
    at oracle.sysman.pp.paf.par.Main.main(Main.java:144)
    oracle.sysman.eml.swlib.exception.LibraryException: A database error has occurred. See administrator or logs for details.
    at oracle.sysman.eml.swlib.exception.LibraryException.databaseError(LibraryException.java:71)
    at oracle.sysman.eml.swlib.DBEntity.insertDirectory(DBEntity.java:543)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.saveDirectory(LibraryServiceImpl.java:742)
    at oracle.sysman.eml.swlib.xml.XMLLoader.retrieveDirectory(XMLLoader.java:364)
    at oracle.sysman.eml.swlib.xml.XMLLoader.processEntity(XMLLoader.java:178)
    at oracle.sysman.eml.swlib.xml.XMLLoader.process(XMLLoader.java:148)
    at oracle.sysman.eml.swlib.LibraryServiceImpl.importEntities(LibraryServiceImpl.java:398)
    at oracle.sysman.pp.paf.par.PARFile.executeSwlib(PARFile.java:978)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:951)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:821)
    at oracle.sysman.pp.paf.par.Main.uploadPar(Main.java:238)
    at oracle.sysman.pp.paf.par.Main.main(Main.java:144)
    Caused by: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSMAN"."MGMT_SWLIB_DIRECTORIES"."NAME")
    ORA-06512: at "SYSMAN.MGMT_SWLIB", line 1097
    ORA-06512: at line 1
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:184)
    at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:873)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3076)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4273)
    at oracle.sysman.eml.swlib.DBEntity.insertDirectory(DBEntity.java:526)
    ... 10 more
    java.lang.NullPointerException
    at oracle.sysman.eml.swlib.LibraryServiceImpl.importEntities(LibraryServiceImpl.java:404)
    at oracle.sysman.pp.paf.par.PARFile.executeSwlib(PARFile.java:978)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:951)
    at oracle.sysman.pp.paf.par.PARFile.deploy(PARFile.java:821)
    at oracle.sysman.pp.paf.par.Main.uploadPar(Main.java:238)
    at oracle.sysman.pp.paf.par.Main.main(Main.java:144)
    java.lang.NullPointerException
    Actually this is the same behavior as described in bug 6822086 on metalink - but I couldn't find any solution there. I also searched through the forum but couldn't find anything....
    Thank you in advance for any answer/suggestion.
    Jure

    Hi,
    Issue solved.The workaraound was to manually upload the *.par files.
    Procedure:
    Under Deployments Tab click on the Provisioning Link in the Top Left section of the Page. In the Administration Tab go to the bottom and ensure that a location to the Software Library Configuration is setup. Then go back to the Deployments Page by clicking again the Deployments tab and click in Deployment Procedures link on the bottom. Using the 'Upload' button upload one at a time the files located under the OMS's $ORACLE_HOME/sysman/prov/paf directory.
    Once all .par files are uploaded, all components, directives and deployment procedures should be visible from the Deployments tab in the Grid Control console.
    Regards,
    Jure

  • Grid Control performance tab not available when on the target home of ASM

    I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

    Hi MarGur
    I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
    First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
    Go to Grid Control Console
    Select Targets ---> Databases
    Press Add --> Select the host ebisdb2.oneshield.com and press continue
    The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
    in the page that appear you must entry all the configuration information of database:
    ORACLE_HOME directory
    DBSNMP USER
    DBSNMP PASSWORD
    HOSTNAME
    PORT
    SID
    Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
    After this many windows appear of configuration process, and you will put the sys password and host credentials.
    If you have problems, tell me
    Regards

  • 10g grid control. minimum DB privileges for database performance tab?

    database -> performance tab -> log into database.
    what are the minimum privileges needed for this? I normally use DBA privs. However, I need to give access to non-dbas. When I try to log in with their account, it says see the help. I have been hunting through the help, but can't find anything about this.

    This article may be of use: http://dbastreet.com/blog/?tag=grid-control
    If you "grant select any table" (Query tables, views, or mviews in any schema) to the role oem_monitor you get what you want. Maybe an overkill but thats what I can think of now.
    Eric

  • Performance reports using Grid Control

    Hello!
    Can we create and schedule database performance reports using oracle 10g grid control?
    Thanks.

    Hi
    Yeah its possible to generate the performance reports using Grid Control.
    Ex:
    Oracle Enterprise Manager GRID Server contains built in reports to support Database Administrators to generate sightly reports.
    First Thing is to click to "Reports" tab on the top, right hand side of the GRID Management Console (figure_grid_management_console). This page is where all the predefined and custom reports can be find. Now click on the "Create" Button on top of the page to create a new custom report. "Create Report Definition" page comes to the screen. There are four tabs for the definition of the report.

  • Oracle 9i Database -- Performance window in Grid Control not data available

    Hi
    I have Grid Control 10.2.0.4 on Red Hat and i monitoring some Oracle 9i Instances. When i go to any of these instances to the Performance section, at begininig , ever, not data available in all the graphics.
    When i select manual refresh the graphic begin to build information. But if i close the explorer and reopen , all graphics not have any information.
    Is the situation normal for all Oracle 9i databases?
    The explanation is that Oracle 9i not have AWR ?
    Thanks

    You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
    When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

  • Grid Control how to disable alert for Tablespace UNDO is 99 percent  full

    I am new to Grid control and want to know how to disable alert for UNDO tablespace full.
    Target Name=xxxx
    Target type=Database Instance
    Host=xxx
    Occurred At=Dec 24, 2010 1:21:00 AM EST
    Message=Tablespace UNDOTBS1 is 99 percent full
    Metric=Tablespace Space Used (%)
    Metric value=99
    Tablespace Name=UNDOTBS1
    Severity=Critical
    Acknowledged=No
    Notification Rule Name=Database E-Mail Notifications
    Notification Rule Owner=SYSMAN

    You should post in the grid control foruma.
    But just go to databases, select your database, metric and policy settings, find the tablespace metric, edit and exclude the undo tablespace.

  • How to improve Grid control performance

    Hi ,
    We are facing very slowness in grid control from past one week.
    Page took more than 3 minutes to load.
    Please provide some workaround to imporove the performance.
    Grid version : 10.2.0.5.0
    OS : Sun /5.10
    Thanks in Advance.

    Hi thank for your reply,
    Stil we are facing slowness . I found some errors in emoms.trc and emoms.log file.
    Below is the prstat output
       PID USERNAME  SIZE   RSS STATE  PRI NICE      TIME  CPU PROCESS/NLWP
    14556 oracle   1344M  811M cpu22   59    0 160:03:17 8.9% java/149
      5045 oracle   2150M 2036M sleep   60    0   0:30:35 0.8% oracle/11
    18388 oracle   2158M 2044M sleep   60    0   6:00:33 0.1% oracle/11
    16194 oracle    225M  141M sleep   59    0   5:32:52 0.1% emagent/18
    18393 oracle   2159M 2044M sleep   60    0   6:16:49 0.1% oracle/11
       239 oracle     36M 2944K sleep   60    0   0:06:04 0.1% httpd/3
    23466 oracle   2664K 1944K cpu20   59    0   0:00:01 0.0% prstat/1
    29035 oracle   2157M 2037M sleep   60    0   1:41:37 0.0% oracle/11From emoms.trc file :
    2010-12-18 05:54:11,782 [XMLLoader2 40000030302.xml] ERROR emdrep.XMLLoaderContext flushTableStatements.1592 - Error while flushing insert statementjava.sql.
    SQLException: ORA-00001: unique constraint (SYSMAN.MGMT_DB_HDM_METRIC_HELPER) violated
    2010-12-18 05:54:18,462 [AJPRequestHandler-ApplicationServerThread-7843] ERROR eml.OMSHandshake processFailure.843 - OMSHandshake failed.(AGENT URL = https:/
    /usadc-vzdb26:3872/emd/main/)(ERROR = KEY_MISMATCH)From emoms.log file :
    2010-12-18 05:45:49,216 [XMLLoader0 30000006013.xml] ERROR emdrep.XMLLoaderContext flushTableStatements.1592 - Error while flushing insert statementjava.sql.
    SQLException: ORA-00001: unique constraint (SYSMAN.MGMT_DB_HDM_METRIC_HELPER) violated
    2010-12-18 05:45:55,769 [HealthMonitor] ERROR emd.main run.365 - HealthMonitor : Found errant task : TaskRegn:ID105128,Callback:class oracle.sysman.emdrep.jo
    bs.JobWorker,Iterative:true,Duration:900,DueTime:1292669155584
    2010-12-18 05:46:10,284 [AJPRequestHandler-ApplicationServerThread-7184] ERROR eml.OMSHandshake processFailure.843 - OMSHandshake failed.(AGENT URL = https:/
    /usadc-vzdb26:3872/emd/main/)(ERROR = KEY_MISMATCH)Please need your suggestion .
    Thanks.

  • Gird Control problem:Host:clicking on performance tab

    Clicking on host performance tab generates an error.
    Error getting data for target Hostname. Exception: oracle.sysman.emSDK.emd.comm.MetricGetException: Row(14): NUMBER type column pmem='-' has invalid number format Switching to the last 24 hrs view.
    Thanks In Advance.

    Have you looked up your version number in the Knowledge Base at metalink?
    Without a lot more information there isn't much anyone can do to help you beyond the referral.

  • Historical Performance Information in Grid Control

    We have EM Grid Control 10.2.0.3 monitoring a 9.2.0.7 database.
    I am not able to see historical information past one day, especially on screen like "Active Sessions Waiting: User I/O". I checked that the statspack is running at level 6.
    I would be extremely obliged if someone has faced this and resolved the issue.

    First, STATSPACK is independent of anything collected by OEM 10g. Also, STATSPACK collection levels refer more to how much detail is collected, not retention.
    For OEM 10g, defaults are I believe - raw data 7 days, hourly 31 days, daily 1 year. If you want to look behind the scenes as if data is really there, check tables like sysman.mgmt$metric_hourly.

  • Data Guard configuration for RAC database disappeared from Grid control

    Primary Database Environment - Three node cluster
    RAC Database 10.2.0.1.0
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Standby Database Environment - one Node database
    Oracle Enterprise Edition 10.2.0.1.0 Single standby
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
    Oracle 10.1.0.1.0
    Grid Control 10.2.0.1.0
    Red Hat 4.0 2.6.9-22 32bit
    After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
    Initializing
    Connected to instance qdcls0427:ELCDV3
    Starting alert log monitor...
    Updating Data Guard link on database homepage...
    Data Protection Settings:
    Protection mode : Maximum Performance
    Log Transport Mode settings:
    ELCDV.qdx.com: ARCH
    ELXDV: ARCH
    Checking standby redo log files.....OK
    Checking Data Guard status
    ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
    ELXDV : Creation status unknown
    Checking Inconsistent Properties
    Checking agent status
    ELCDV.qdx.com
    qdcls0387.qdx.com ... OK
    qdcls0388.qdx.com ... OK
    qdcls0427.qdx.com ... OK
    ELXDV ... WARNING: No credentials available for target ELXDV
    Attempting agent ping ... OK
    Switching log file 672.Done
    WARNING: Skipping check for applied log on ELXDV : disabled
    Processing completed.
    Here are the steps followed to add the standby database in Grid Control
    Maintenance tab
    Setup and Manage Data Guard
    Logged in as sys
    Add standby database
    Create a new logical standby database
    Perform a live backup of the primary database
    Specify backup directory for staging area
    Specify standby database name and Oracle home location
    Specify file location staging area on standby node
    At the end am presented with a review of the selected options and then the standby database is created
    Has any body come across a similar issue?
    Thanks,

    Any resolution on this?
    I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
    Everything else seems to be working fine. Logs are being applied, etc.
    I can't figure out what credentials its looking for.

Maybe you are looking for

  • No matter what I do. MacBook Pro LAGGY like ****. PLEASE HELP

    So here is my story.... I bought my MacBook Pro 15" Late 2011.... two years ago even little more.... after few months a start to have problems with my mac.... stutter... lag.... freez..... stuff that i never used to see in my windows machine... The t

  • IPhone calendar entry problem

    Hi all, I'm hoping somebody can help me with this problem. I am using iCal on OS X 10.7.2 and iOS 5 on my iPhone. Whenever I syncronise my calendars via iTunes those existing calendar entries which I have changed in iCal show up as new entries in cal

  • Yahoo toolbar covers my firefox menues

    Installed Mozilla on my new computer from download. Install included Yahoo tool bar. Don't want Yahoo. Can't remove Yahoo because it covers my Firefox menue items. == This happened == Every time Firefox opened == When I installed anew copy of Firefox

  • Query Views on Workbook - filter doesnt work

    Hi All, I have developed a workbook using a query view, When i try to do filtering using the filter button the workbook data does'nt change. Can anyone of you advise what needs to be done. Thanking you.

  • Dynamic page building...

    Hello ~ I've previously posted a topic about building dynamic tabs base on data from a database rowset... got that figured out... now would like to put a different dynamic tree on each page based on a different rowset.. and not sure how to accomplish