Windows external authentification in grid control

I am currently facing this error when i try to connect to a windows database for "performance information tab" through a grid control installed on a linux platform :
"Io exception: The Network Adapter could not establish the connection"
The sqlnet.ora on the windows platform has the following content :
SQLNET.AUTHENTICATION_SERVICES= (NTS)
The listener.ora on the windows platform has the following extra content to be able to log errors :
LOGGING_LISTENER = ON
TRACE_LEVEL_LISTENER = ADMIN
I tried to use many accounts that are in the "ora_dba" group but i get the previous error.
Below an extract of the listener.trc file generated when i try to connect :
TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production on 19-AUG-2008 10:47:17
Copyright (c) 1991, 2006, Oracle. All rights reserved.
[19-AUG-2008 10:47:17:611] --- TRACE CONFIGURATION INFORMATION FOLLOWS ---
[19-AUG-2008 10:47:17:611] New trace stream is E:\softz\oradb.1020\products\network\trace\listener.trc
[19-AUG-2008 10:47:17:611] New trace level is 6
[19-AUG-2008 10:47:17:611] --- TRACE CONFIGURATION INFORMATION ENDS ---
[19-AUG-2008 10:47:17:611] --- PARAMETER SOURCE INFORMATION FOLLOWS ---
[19-AUG-2008 10:47:17:611] Attempted load of system pfile source E:\softz\oradb.1020\products\network\admin\listener.ora
[19-AUG-2008 10:47:17:611] Parameter source loaded successfully
[19-AUG-2008 10:47:17:611]
[19-AUG-2008 10:47:17:611] Attempted load of command line source
[19-AUG-2008 10:47:17:611] Parameter source was not loaded
[19-AUG-2008 10:47:17:611]
[19-AUG-2008 10:47:17:611] -> PARAMETER TABLE LOAD RESULTS FOLLOW <-
[19-AUG-2008 10:47:17:611] Successful parameter table load
[19-AUG-2008 10:47:17:611] -> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
[19-AUG-2008 10:47:17:611] LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = RMFRSMHA083)(PORT = 1521)) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))))
[19-AUG-2008 10:47:17:611] LISTENER1020 = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = RMFRSMHA083)(PORT = 1521)) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))))
[19-AUG-2008 10:47:17:611] LOGGING_LISTENER1020 = OFF
[19-AUG-2008 10:47:17:611] TRACE_LEVEL_LISTENER1020 = ADMIN
[19-AUG-2008 10:47:17:611] SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (ORACLE_HOME = E:\softz\oradb.1020\products) (SID_NAME = DBATSTD)) (SID_DESC = (ORACLE_HOME = E:\softz\oradb.1020\products) (SID_NAME = DBATSTS)))
[19-AUG-2008 10:47:17:611] TRACE_LEVEL_LISTENER = ADMIN
[19-AUG-2008 10:47:17:611] SID_LIST_LISTENER1020 = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = e:\softz\oradb.1020\products) (PROGRAM = extproc)))
[19-AUG-2008 10:47:17:611] LOGGING_LISTENER = ON
[19-AUG-2008 10:47:17:611] --- PARAMETER SOURCE INFORMATION ENDS ---
[19-AUG-2008 10:47:17:611] --- LOG CONFIGURATION INFORMATION FOLLOWS ---
[19-AUG-2008 10:47:17:611] Log stream will be "E:\softz\oradb.1020\products\network\log\listener.log"
[19-AUG-2008 10:47:17:611] Log stream validation requested
[19-AUG-2008 10:47:17:611] Log stream is valid
[19-AUG-2008 10:47:17:611] --- LOG CONFIGURATION INFORMATION ENDS ---
[19-AUG-2008 10:47:17:611] nlstdipi: entry
[19-AUG-2008 10:47:17:611] nlstdipi: exit
[19-AUG-2008 10:47:17:611] nsglldprm: Resolved "INBOUND_CONNECT_TIMEOUT_LISTENER" to: 60
[19-AUG-2008 10:47:17:611] nsglldprm: Resolved "STARTUP_WAIT_TIME_LISTENER" to: 0
[19-AUG-2008 10:47:17:611] nsglldprm: LocalOSauth enabled
[19-AUG-2008 10:47:17:611] nsinherit: doing connect handshake...
[19-AUG-2008 10:47:17:642] nsc2addr: (ADDRESS=(PROTOCOL=beq))
[19-AUG-2008 10:47:17:642] nlpcaini: entry
[19-AUG-2008 10:47:17:642] nlpcaini: No process parameters set
[19-AUG-2008 10:47:17:642] nlpcaini: exit
[19-AUG-2008 10:47:17:642] nsinh_hoff: inheriting the connection...
[19-AUG-2008 10:47:17:642] nsmal: 772 bytes at 0xfdf9a8
[19-AUG-2008 10:47:17:642] nsmal: 1644 bytes at 0xfdfcb8
[19-AUG-2008 10:47:17:642] nsmal: 84 bytes at 0xfe0428
[19-AUG-2008 10:47:17:642] nsopen: opening transport...
[19-AUG-2008 10:47:17:642] ntpcon: entry
[19-AUG-2008 10:47:17:642] ntpcon: toc = 6
[19-AUG-2008 10:47:17:642] ntpcon: exit
[19-AUG-2008 10:47:17:642] ntpcon: entry
[19-AUG-2008 10:47:17:642] ntpcon: toc = 4
[19-AUG-2008 10:47:17:642] sntpinherit: entry
[19-AUG-2008 10:47:17:642] sntpinherit: Attempting to make pipe \\.\PIPE\ORANTP744.4C8.w
[19-AUG-2008 10:47:17:642] sntpinherit: Listening on pipe \\.\PIPE\ORANTP744.4C8.w
[19-AUG-2008 10:47:17:642] sntpinherit: Attempting to make pipe \\.\PIPE\ORANTP744.4C8
[19-AUG-2008 10:47:17:642] sntpinherit: Listening on pipe \\.\PIPE\ORANTP744.4C8
[19-AUG-2008 10:47:17:642] sntpinherit: Successfully established pipe 256 to parent.
[19-AUG-2008 10:47:17:642] sntpinherit: Successfully established pipe 252 to parent.
[19-AUG-2008 10:47:17:642] sntpinherit: exit
[19-AUG-2008 10:47:17:642] ntpcon: NT layer IPC connection has been established.
[19-AUG-2008 10:47:17:642] ntpcon: exit
[19-AUG-2008 10:47:17:642] nsopen: transport is open
[19-AUG-2008 10:47:17:642] nsoptions: lcl[0]=0x0, lcl[1]=0x10000000, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
[19-AUG-2008 10:47:17:642] nsoptions: lcl[0]=0xf4ffefff, lcl[1]=0x10000000, gbl[0]=0x78bf, gbl[1]=0x0
[19-AUG-2008 10:47:17:642] nsnainit: inherit
[19-AUG-2008 10:47:17:642] nsnasvnainfo: NA disabled for this connection
[19-AUG-2008 10:47:17:642] nainit: entry
[19-AUG-2008 10:47:17:642] nagblini: entry
[19-AUG-2008 10:47:17:642] nau_gin: entry
[19-AUG-2008 10:47:17:642] nau_gparams: entry
[19-AUG-2008 10:47:17:642] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
[19-AUG-2008 10:47:17:642] nam_gbp: Parameter not found
[19-AUG-2008 10:47:17:642] nau_gparams: Using default value "FALSE"
[19-AUG-2008 10:47:17:642] nau_gslf: entry
[19-AUG-2008 10:47:17:642] nam_gic: entry
[19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
[19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
[19-AUG-2008 10:47:17:642] nam_gic: Found 0 items
[19-AUG-2008 10:47:17:642] nam_gic: exit
[19-AUG-2008 10:47:17:642] nau_gslf: Using default value "all available adapters"
[19-AUG-2008 10:47:17:642] nauss_set_state: entry
[19-AUG-2008 10:47:17:642] nauss_set_state: exit
[19-AUG-2008 10:47:17:642] nau_gslf: exit
[19-AUG-2008 10:47:17:642] nau_gparams: exit
[19-AUG-2008 10:47:17:642] nau_gin: exit
[19-AUG-2008 10:47:17:642] nagblini: exit
[19-AUG-2008 10:47:17:642] na_saveprot: entry
[19-AUG-2008 10:47:17:642] na_saveprot: exit
[19-AUG-2008 10:47:17:642] nacomin: entry
[19-AUG-2008 10:47:17:642] nas_init: entry
[19-AUG-2008 10:47:17:642] nas_init: exit
[19-AUG-2008 10:47:17:642] nau_ini: entry
[19-AUG-2008 10:47:17:642] naugcp_get_connect_parameters: entry
[19-AUG-2008 10:47:17:642] nauss_set_state: entry
[19-AUG-2008 10:47:17:642] nauss_set_state: exit
[19-AUG-2008 10:47:17:642] naugcp_get_connect_parameters: exit
[19-AUG-2008 10:47:17:642] nau_gettab: entry
[19-AUG-2008 10:47:17:642] nau_gettab: exit
[19-AUG-2008 10:47:17:642] nau_sini: entry
[19-AUG-2008 10:47:17:642] nau_sini: exit
[19-AUG-2008 10:47:17:642] nau_ini: exit
[19-AUG-2008 10:47:17:642] naeeinit: entry
[19-AUG-2008 10:47:17:642] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
[19-AUG-2008 10:47:17:642] nam_gbp: Parameter not found
[19-AUG-2008 10:47:17:642] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
[19-AUG-2008 10:47:17:642] nam_gnsp: Parameter not found
[19-AUG-2008 10:47:17:642] naequad: Using default value "ACCEPTED"
[19-AUG-2008 10:47:17:642] nam_gic: entry
[19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
[19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
[19-AUG-2008 10:47:17:642] nam_gic: exit
[19-AUG-2008 10:47:17:642] naesno: Using default value "all available algorithms"
[19-AUG-2008 10:47:17:642] naeshow: entry
[19-AUG-2008 10:47:17:642] naeshow: exit
[19-AUG-2008 10:47:17:642] naeeinit: exit
[19-AUG-2008 10:47:17:642] naecinit: entry
[19-AUG-2008 10:47:17:642] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
[19-AUG-2008 10:47:17:642] nam_gnsp: Parameter not found
[19-AUG-2008 10:47:17:642] naequad: Using default value "ACCEPTED"
[19-AUG-2008 10:47:17:642] nam_gic: entry
[19-AUG-2008 10:47:17:642] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
[19-AUG-2008 10:47:17:642] nam_gic: Parameter not found
[19-AUG-2008 10:47:17:642] nam_gic: exit
[19-AUG-2008 10:47:17:642] naesno: Using default value "all available algorithms"
[19-AUG-2008 10:47:17:642] naeshow: entry
[19-AUG-2008 10:47:17:642] naeshow: exit
[19-AUG-2008 10:47:17:642] naecinit: exit
[19-AUG-2008 10:47:17:642] nadisc: entry
[19-AUG-2008 10:47:17:642] nacomtm: entry
[19-AUG-2008 10:47:17:642] nacompd: entry
[19-AUG-2008 10:47:17:642] nacompd: exit
[19-AUG-2008 10:47:17:642] nacompd: entry
[19-AUG-2008 10:47:17:642] nacompd: exit
[19-AUG-2008 10:47:17:642] nacomtm: exit
[19-AUG-2008 10:47:17:642] nas_dis: entry
[19-AUG-2008 10:47:17:642] nas_dis: exit
[19-AUG-2008 10:47:17:642] nau_dis: entry
[19-AUG-2008 10:47:17:642] nau_dis: exit
[19-AUG-2008 10:47:17:642] naeetrm: entry
[19-AUG-2008 10:47:17:642] naeetrm: exit
[19-AUG-2008 10:47:17:642] naectrm: entry
[19-AUG-2008 10:47:17:642] naectrm: exit
[19-AUG-2008 10:47:17:642] nagbltrm: entry
[19-AUG-2008 10:47:17:642] nau_gtm: entry
[19-AUG-2008 10:47:17:642] nau_gtm: exit
[19-AUG-2008 10:47:17:642] nagbltrm: exit
[19-AUG-2008 10:47:17:642] nadisc: exit
[19-AUG-2008 10:47:17:642] nainit: exit
[19-AUG-2008 10:47:17:642] nsnainit: NS Connection version: 313
[19-AUG-2008 10:47:17:642] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[19-AUG-2008 10:47:17:642] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
[19-AUG-2008 10:47:17:642] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
------------------------------------------------------------------------------------------------------------------------

On your WIindows NT server your AGENT is going to be on, you are required to specify the HOSTNAME.
The listener.ora configuration file uses a fully qualified hostname. Open a command prompt and issue a ping to display the fully qualified DNS host.
You want that to be the HOST= value in the listener.ora and the HOSTNAME of your AGENT.
When you install the AGENT you will be prompted for the OMS hostname and port (like a TNS string) for your Linux 64bit Management Server box.

Similar Messages

Linux Grid control and windows agents

Hi all,
I have a Linux based GC and want to communicate with agents on a windows server. Does this combination use SSH? how do you go about installing agents remotely in this configuration. Any help would be apreciated.
rgds
alan

It's possible to install agents remotely on Windows. See this metalink note:
How to Install/Configure Cygwin and 'ssh' Server on Windows for use with Grid Control Remote's Agent Deployment
Doc ID:389632.1
Werner

Can we install 32-bit Windows Grid Control on 64-bit 2008 Windows server ?

Dear Guru's,
We wish to install GRID for one of our 11.1.0.6 production database which is on 64-bit Windows 2008 (Enterprise Edt) server.
As per http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html , Only Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0)available which is on 32- Bit.
Now my concerns are :-
1. Can we install Windows 32-bit 11g Grid Control Release 1 (11.1.0.1.0) on 64-bit Windows 2008 server ??
2. This is 4GB database ( with less workload) , but since this is the special requirement from the client where he wants to have alert information for this database.
Is there any alternate option than GRID which can fullfil the requirement of sending alerts ???
Note :- This database is the only database at our site which is on diffrent network where we can't even use internet.( For sending alerts )
Thanks in advance

Are you planning on installing GC on the same host machine? Eh, not sure that's a great idea, at least for the OMSNo we are planning to install Grid control on dr server
What did you read from the Installation guides - found via Documentation tab from the link you posted?I didn't understand your question ; My database is on 11.1.0.6 and hence i think i should go for 11gR1 Grid control. Please correct me if i am worng
What "alerts" are you referring to? What's the "sending" requirements? We want basic alerts like diskspace full ,CPU Usage, Tablespace full , Alert log error etc..
Is there any other tool / utility that i can use for the same ?

GRID Control and management hostname

With a HA deployment you have to set :
emd.properties:#AgentListenOnAllNICs=FALSE
This is ok for me but the servers have 3 differents IP adresses (3 differents hostname), one is foucuss for management tasks and this is not the name registered by the Agent.
Do you know if it is possible to run host scripts (external jobs) with Grid Control and to specify the hostname where these jobs have to run by default the jobs will run on the hostname registered by the Agent.

Hello,
There is currently no support for CEP in Grid Control.
andy

Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent

I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
     at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
     at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
     at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
     at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
     at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
     at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andy

sorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures

Enterprise manager Grid Control for Windows 64 bit

Hi,
I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
Thanks in Advance.
SK.

The OMS is on Win x86 and supports Agent on Win x64 target.

How To Install/Configure OEM Grid Control On Windows

Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,

You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob

How to install oracle10g grid control on windows

i want,
how to install oracle10g R3 grid control on windows
in my server ,i have 4 database ..oracle10g R2 ..is running...

http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Grid Control on Windows 64bit

Hi all,
I very new on Grid Control because actual I only have one database to administrate so the Enterprise Manger is very fine.
But in the future this will be expanded to 4 or 5 databases on different machines so I think the Grid Control will "help" me... Or I'm wrong?
Now the thing is, that my company is using Windows 2003 R2 64bit as OS and the Databases will be 10.2.0.4 64bit.
So now I'm on the Oracle Grid Control page and see, that Grid Control is not available for Windows in 64bit.
So I think now, that I have to have an additional Windows 32bit Server for running Grid Control and the Agent’s as 64bit for Windows for the Databases.
Or does someone have a different idea??
Thanks for your help.
Br
Joerg

Hi,
thanks for your post.
I have checked it on MetaLink and as you can see on the screenshot Windows x64 is not certified.
So I think I have to run an additional Windows 2003 32bit.
How ever... thanks.
br
Joerg

Installing 10g and Grid control together on Windows Server 2003

Hi all,
I've been having some trouble installing both the Grid Control and Oracle 10g together on a Windows Server 2003 box.
Here's the steps I've followed (if im stepping away from the norm, please tell me.. i REALLY need to do this properly without any hacks.. right now im on a test box.. but soon enough I have to do it in a live production environment and I really need a clean install).
I had a copy of Oracle 9i installed - my databases are pretty small.. 1.5Gb at most and I have been advised to just do an export and import them back in later.. which is fine by me..
I uninstalled Oracle 9i, making sure to check all the environment variables were clear and the registry settings were gone.
I ran the grid control setup
Set Home name = Ora10gGC
Set home path = C:\Oracle\Ora10gGC
I selected Enterprise Manager 10g Grid Control Using a New database 10.1.3.0
I set my passwords, and then set the global database name as emrep (the default)
All the optional configuration assistants ran successfull
Once this was all done and the install was finished, I restarted the server
Then I inserted the Oracle 10g cd
I ran 10g setup
Click Advanced installation
Set home name = Ora10g
Set home path = C:\Oracle\Ora10g
I selected Enterprise edition
Selected General purpose database
I got the following message:
The ORACLE_HOME environment variable is current set. This will prevent proper use of Multiple Oracle Homes and since it is not required for any Oracle products to function, it will be unset in your environment.
I set the global database name on my starter database to STARTER, I selected Use Grid Control for Database Management and set my paths and passwords, then I clicked install.
The install worked up till it tried to create the starter database, then it failed with an ORA-12560 error.
I checked the environment variables and it seems that ORACLE_HOME wasn't unset after all. I deleted it from my environment variables and restarted the server, but I still get the ORA-12560 error when i try to create a new database.
I'd really appreciate it if someone could tell me how to install these 2 products together properly.. Thanks!

I suggest you to read Metalink Note:344537.1 "Installing EM 10g Grid Control Fails to Start the TNSListener Due to Environment Settings"
Additionaly could you post the fragment from alert.log and listener.log files, so more diagnostic information can be provided on this issue.
~ Madrid.

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

Grid control 11g on Windows availability

Hi
Does any one have any idea when the 11g Grid is available for Windows environment? Can this be available for 64 bit windows OS platform also. We have 11gR2 Oracle Grid infrastructure RAC running on our dev farm. I did applied patches to Grid Control 10.2.0.5.0 to support DB 11.2.0.1.0 targets using metalink doc id
[ID 953846.1]. Scan listeners are not showing as targets with 10.2.0.5 grid. Even local listener is not coming while discovering. At cluster managed service page if I create an application service it adds servers physical address to tnsnames.ora file instead of vips or scan ips.
If anyone resolve this kind of issues it will be helpfull.
Thanks
Rao

Hi
Have you tried:
INFO: Calling Query NLSQueries11.1.0.7.0 GetOSNlsLang
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support : I think this is somewhat to complex for forum users to analyze.
Success!!
FJFranken

Grid Control for windows

Hi Experts,
We're trying to download and install Oracle grid control for windows 64bit but we can't find any 64bit release!
Can we safely download and install Enterprise Manager 11g Grid Control Release (11.1.0.1.0) - Windows 32bit from http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html ? or should we be installing a different version??
Should Grid control be installed on the DB server in the 1st place or should it be installed on another server?
Current Oracle Software: 11.2.0.1 64bit.
Server OS: Windows 2008 Server 64bit.
Can you kindly let us know.
Thanks

We finally got our facts right..
The Grid Control Enterprise Manager comes only in 32 bits.. However the Grid Control agent that needs to be installed on the DB server comes in 32/64bits and is supported under different OS platforms.
Metalink (Doc ID 412431.1) shows the Oracle Enterprise Manager Grid Control Certification Checker/matrix that we found extremely useful.
Enterprise Manager Grid Control comes with the basic features and is free to use. Any extra features are considered addons and do need to be properly licensed.
Thanks

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

How to Install Grid control for 10g (WINDOWS)

Dear All,
This is the first time i am going to test on Grid control. i have lot of droughts from the beginning...
what is the first step to install, database or grid control tool.(*Windows*)
i am downloading the below software from e-delivery
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 1 of 2) V15628-01 Part 1 of 2 1.1G
Oracle Enterprise Manager 10g Release 5 Grid Control (10.2.0.5.0) Patch for Microsoft Windows (32-bit) (Part 2 of 2) V15628-01 Part 2 of 2 1.1G
Is the above software containing _10g database alone_, or its with Grid control, if its with grid control kindly let me know how to install ,, kindly don't give me oracle documents. please explain me int his blog itself or some different blogs.
Any one explain me what is the step i have to take after this,, ??
Thanks
Abdull
Edited by: user9111553 on Nov 23, 2010 12:01 AM

Hi Miguel,
Could you help me? Full and base version of what?
For instance, i have Oracle 10.2.0.4 version and did not check EM during instalation oracle sw. So what is the first step to install and configure Grid Control? i downloaded Grid Control and read readme file. There is information that i need to install OEM and then Grid Control. did i understand right way or misunderstood? could you show me steps for implement Grid Control with 10g on Windows?
regards and thanks,
rustam

Windows external authentification in grid control

Similar Messages

Maybe you are looking for