Performance Tuning of Report without ST05 and SE30

Hi All ,
I need to perfromance tune a Z report for a particular variant.
Issue : 1. No ST05 authorization avaliable.
2. When Report is executed online using SE30 for runtime analysis, error message time limit exceed is displayed.
Please let me know , how to do analysis of this object without using St05 and Se30.
I know that I can execute it in backgroung and get the actual time required for execution, but still I will not be able to get the cause of it.
Will report when scheduled in backgroung from Se30 , will give correct result ??
Is there any alternate approach avaliable to do the analysis.?
Thanks in Advance.
Edited by: Harsh Bhalla on Dec 23, 2009 12:15 PM

you can increase the time limit for the SE30 by yourself in the measurement restrictions, maximum is about 1:15 h, larger values are not possible because the number of microcseconds would exceed the limit of integer numbers. But this should still
be enough for your case.
You should ask for the authorization for the ST05.
Overall, if possible it is always better the run smaller examples, it is much better to trace two smaller examples with different sizes than one very large example.
Siegfried

Similar Messages

Diffrence st05 and se30 where we can use

hi experts what is st05 and perpose
what about se30 and perpose when we use these in real time
please guide me

Hi Prasanna,
SQL Trace Locate the document in its SAP Library structure
Use
The SQL Trace function is an on-demand log of selected SQL statements that are issued against the database through the Open SQL Engine. The SQL Trace can be switched on or off dynamically. The log format is database independent. Besides the SQL statement text, each log record contains information about the point in time when the statement was executed, its duration, its input parameters and results (where applicable) as well as context information.
Features
The SQL Trace is especially useful for:
·        Development
SQL Trace can help JDO, enterprise beans, servlet and JSP developers to learn which kind of database accesses their code produces.
·        Performance analysis
Typically, performance issues are caused by inefficient database accesses. In this case SQL Trace can be used to show the issued SQL statements and their duration, thus helping to identify inefficient SQL statements.
Activities
Typically, you should use the SQL Trace when you need to check the behavior of a particular application. This is the following scenario:
       1.      You launch the SQL Trace application.
       2.      You activate the SQL Trace.
       3.      You run the application that you want to trace.
       4.      You deactivate the SQL Trace.
       5.      You set filters optionally.
       6.      You evaluate the trace.
You can also evaluate a trace that already exists.
The SQL Trace also provides functions for file administration.
Note
SQL Trace is less suitable for detecting general performance issues. Therefore, we do not recommend that you keep it constantly activated, as it consumes additional resources.
Performance Measurements Locate the document in its SAP Library structure
Runtime Analysis
If you want to monitor the performance of your system, or compare its performance at different times, you can perform a runtime analysis. You usually start the runtime analysis (after performing certain activities in the system) with transaction SE30.
You use transaction SICF to activate the runtime analysis both for ICF runtime and for applications that run using ICF runtime. You can evaluate the results with transaction SE30.
You can start these functions from the menu in transaction SICF by choosing Edit ® Runtime Analysis, and then measure the performance. Choose Activate and enter the request paths for which you want activate the runtime analysis.
You can set the option User-Dependent to activate the runtime analysis for a specific user or client (that is, all users in a client) You can also implement a measurement variant. To do this, you must enter the variant user (owner of the variant), the variant itself, and the precision.
This graphic is explained in the accompanying text Any active runtime analyses must be deactivated after the requests have been executed. You deactivate the requests in transaction SICF by choosing Edit ® Runtime Analysis ® Deactivate. This deactivates the corresponding paths and users.
You can evaluate the recorded runtime measurements in transaction SE30. The measurement results are saved under the user defined in the settings in transaction SICF. If you select the option User-Dependent, you find the entries in transaction SE30, under the user with which you executed the requests. If the option User-Dependent is not active, the entries are saved under the user SAPSYS. You can find the measurement entries for specific users in transaction SE30 under Performance File ® Other File Enter the relevant user name.
In the following section, you can read about Transporting ICF Services.
Regards,
prasad

Web report without userid and password

Hi Experts,
I exported a BW web report to excel spreadsheet and sent it through mail to others, When recepients tried to open that exported spreadsheet, It is prompting for userid and password. I dont want this to be happened and it should open without asking userid / passsword? Can any one suggest some clues onthis.

Check to see if they are looking at the data or running the report. If they are running the report, then they will be prompted for the user id and password.
You can run the report for them and download the data only, then they will not get the prompts, however they will not be able to update the data or drill down.
Alternatively, you can use the Broadcaster to send out the updated reports directly to them.
Brian

Expense report without receipts and justification go through audit

Hello,
can anyone advise on how to force all expense report to go through audit process? I have tested that expense item without receipts and justification will be auto-approved by the system.
Thanks.

Did you ever find a solution to this question? My internet expense templates are set to receipts are required for CASH and CREDIT CARD over a certain amount. Also, internet expense setup and admin is set to place the report on hold if receipt has not been received. I ran the Expense Report Export and they imported even though receipts were not received. Thank you.

Performance tuning for report

I´m experiencing performance problems in a regular report in Apex 3.1 using a pipelined function. May-be anybody has a hint of how to approach this problem best. There might be a pretty basic solution, as this is a common situation, but I´m not seeing it:
My report query looks something like this:
SELECT HTML_COL1,
HTML_COL2,
HTML_COL3,
HTML_COL4
FROM TABLE( pkg_queries.find_rows(:p_arg1, :p_arg2, ...) )
The main cursor in "find_rows" actually executes fast. Yet for each row there are quite a few queries
that parse together the html-columns. This is not really significant for, let´s say, 50 rows. But for 500 rows
there is a significant performance loss.
My problem is, that the reports fetches all of the rows.
Thus, the complex html-rendering is also executed for rows that are not being shown (I´m using pagination in this report).
For example, I would like to tell "find_rows" which rows should be rendered and which ones may be left bare. May-be the start and end offset for the current report-page are available anywhere? Or may-be there is another
solution?
Thanks for any help
Jens

@Michael
Perfect, this is just what I´ve been looking for - I should have paid more attention to the URLs :-)
Thanks a lot!
@John
Thanks also for your suggestions. I was thinking about the mview approach as the last escape. The report runs fine, now.
Just to round up the post, this is what I did
- I added a rownum-column in the main cursor in the report-function "find_rows"
- Before populating the HTML_COL-columns I check pg_min_rows and pg_max_rows. Note, that this is also done before any sorting. So if sorting is enabled, this approach needs to be changed.
l_current_min_row := apex_application.g_flow_current_min_row;
l_current_max_rows:= apex_application.g_flow_current_max_rows;
FOR l_rec IN ....
LOOP
IF l_rec.row_num >= l_current_min_row
AND l_searchdis_rec.row_num < l_current_min_row + l_current_max_rows
THEN
END IF;
PIPE ROW(...);
END LOOP;

How to open a report without refreshing and sending some param value

we have a summary report which has links to the detail report.For example the summary report has data like
Countries        EmployeeCount
UK                5
US                6
China                7
Total                18
When we click on China it must show the Employees whose country is China (detail report) When we click on Total it shows Employee of all countries UK,US,China...
Now when we run the summary report online say at 5:10 it shows the staus of countries at 5:10.Say the report is open while an employee of china is moved from China to Uk.But when we open the detail report it shows China count as 6 which should actually be 7 according to the summary report run time.
A similar problem exist when we schedule the report .When we schedule the summary report and detail report at same time..And then try to open the scheduled instance of detail report from summary scheduled instance ,It only works fine if no parameter is passed to openDocument url.
Say suppose I click China on summary report the Value China should be passed to detail report as Country.But whenever we try to open a scheduled instance of Detail Report along with a parameter using openDocument Url.It refreshes the whole data even though refresh is set to 'N'.So the scheduled data is lost..Even if we try for Drillfilters in detail Report we cannot set it at runtime using open document Url.

Mihail - I detailed a couple of approaches here: Re: Application Link
Scott

Call CR XI from C++ routine, need to run the report without display and send the resulting report to the printer

<table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"></tr><tr><td height="1" style="font-size: 1pt"></td></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p>I initiate a CR XI from a C++ routine using ShellExecute command, the report file is opened and the C++ program continues to execute, this is working fine, now I need the following two things:</p><p>1. When the report is invoked I would like it to run and print the result either to a printer or to a file.</p><p>2. I need to send the report parameters since it will not prompt for it if it runs automatically.</p><p>Thanks in advance for your help.</p></td></tr><tr></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p> </p></td></tr></tbody></table></blockquote></blockquote>

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Performance issue of report

Hi Friends,
Can you please give me the exact answer for the below question.
Suppose my report program is taking long time to execute, what are the reasons that may effect the report.
and what are the remedies should i follow, please provide appropriate answer.
Advance thanks,
Chandra.

hi,,
Go to tranx SE30 here you will get Tips and Trciks for the performance tuning.
Check it carefully and check whether you can do something for improving performance of you code.
It will help you a lot and will reduce your Execution time.
If you are using READ TABLE command in your program then you can check whether you can use HASHED TABLE it will improve performance of your code a lot but it has some restrictions.
I will explain some of the points to improve the performance of the report try to write code according to that ok.
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement, SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING", creates more coding but is more effcient.
Reward points if helpful.
regards,
rekha

Performance tuning help

hello friends,
i am supposed to use ST05 and SE30 to do performance tuning,and also perform cost estimation,
can some plz help me understand, i am not that good at reading large paragraphs, so plz donot give me links to help.sap
thank you.

Hi
Se30 is the runtime analysis
Here it will give you detailed graph about your program .
abap time,database time application time ..
st05 is sql trace where it will give you individual select stmnts in your program
and also proper index is being used or not.
Other performance tips
check any select stmnts inside the loop and replace with read statement
use binary search in read stmnts
use proper index in where condition in select stmnt.
if you want to execute st05..go st05..trace on-execute ur program--come to st05..trace off and --list trace...
you get summary details of select queires and it will be pink or other color.
Thanks

Performance Tuning -To find the execution time for Select Statement

Hi,
There is a program that takes 10 hrs to execute. I need tune its performance. The program is basically reading few tables like KNA1,ANLA,ANLU,ADRC etc and updates to Custom table. I did my analysis and found few performance techniques for ABAP coding.
Now my problem is, to get this object approved I need to submit the execution statistics to client.I checked both ST05 and SE30. I heard of a Tcode where we can execute a select statement and note its time, then modify and find its improved Performance. Can anybody suggest me on this.
Thanks,
Rajani.

Hi,
This is documentation regarding performance analysis. Hope this will be useful
It is a general practice to use           Select * from <database>     This statement populates all the values of the structure in the database.
The effect is many fold:-
     It increases the time to retrieve data from database
     There is large amount of unused data in memory
     It increases the processing time from work area or internal tables
It is always a good practice to retrieve only the required fields. Always use the syntax      Select f1 f2 fn from <database>
e.g.     Do not use the following statement:-
     Data: i_mara like mara occurs 0 with header line.
     Data: i_marc like marc occurs 0 with header line.
     Select * from mara
          Into table i_mara
          Where matnr in s_matnr.
     Select * from marc
          Into table i_marc
          For all entries in i_mara
          Where matnr eq i_mara-matnr.
     Instead use the following statement:-
                                   Data: begin of i_mara occurs 0,
                                        Matnr like mara-matnr,
                                              End of i_mara.
     Data: begin of i_marc occurs 0,
          Matnr like marc-matnr,
                                        Werks like marc-werks,
                                             End of i_marc.
     Select matnr from mara
          Into table i_mara
          Where matnr in s_matnr.

Reg: Process Chain, query performance tuning steps

Hi All,
I come across a question like, There is a process chain of 20 processes.out of which 5 processes are completed at the 6th step error occured and it cannot be rectified. I should start the chain again from the 7th step.If i go to a prticular step i can do that particular step, How can i start the entair chain again from step 7.i know that i need to use a function module but i dont know the name of FM. Please somebody help me out.
Please let me know the steps involved in query performance tuning and aggregate tuning.
Thanks & Regards
Omkar.K

Hi,
Process Chain
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Query performance tuning
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. --- sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
Thanks,
JituK

Performance tuning tools

hi Gurus,
Sorry to disturb u, have a big trouble with performance tuning.
I m working on performance tuning part for a project and i have got the w
they jus give me the whole report about the performance releated isses at all levels so everthing is there(repert is Based on Production ) but now after going through this report wot to do and where to start cos i only got access to Test client and no access to development cleint first things and than the major problem they are facing is that when they run report in a Test cleint performance is ok but when they run reports in a Production then system performance is really poor, so they want to know the reason for that as well.
as far as i understand is that for performance in prod system i should have acces to the system first and thean check the database there,so the thing is that can u plz tell me that how to check the database and how to run whole system report on that system as well which gives me complete report for the whole system performance including OS level, DB level,And than SAP systme level,they have some of this kind of tool here to use that but dont kknow which 1 is that and how to use that.
waiting for reply.
thanks In advance.
regards
Amit

Hi Dash,
thanks for quick reply.
when i go and check the report in ST02 so there Hit Ratio is 99.94%, but query running time is significantly or i should say more than 3 times in Production system, so dont know where the problem is.
Cos i m getting slow performance in a Prod system so dont know that how to start analysis on that systme cos i dont have acess to Prod system, so plz and other
commment on this ll be appriciated.
thanks
regards
Amit

Performace Issue using Crystal Report For enterprise and BEx Queries

Hi all;
    We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
    |7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext    | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
     at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
     at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
     at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
     at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
     at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
     at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
Anis

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Performance tuning related issues

hi experts
i am new to performance tuning application. can any one share some stuff(bw3.5& bi7)related to the concern area.send any relavent docs to my id: [email protected] .
thanks in advance
regards
gavaskar
[email protected]

hi Gavaskar,
check this, you can download lot of performance materials
Business Intelligence Performance Tuning [original link is broken]
and e-learning -> intermediate course and advance course
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/fe5b0b5e-0501-0010-cd88-c871915ec3bf [original link is broken]
e.g
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/10b589ad-0701-0010-0299-e5c282b7aaad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/8e6183ad-0701-0010-e083-9ab1c6afe6f2
performance tools in bw 3.5
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/07a4f070-0701-0010-3b91-a6bf7644c98f
(here also you can download the presentation by righ click the disk drive icon)
hope this helps.

Performance Tuning on Extractiors

hello friends....
Can any 1 give some information on Performance Tuning on Extractors and some other performance tuning....
thanx for ur help....

Our book on BW performance tuning has a detailed explanation and recommendations regarding step by step process of how to do the performance tuning on Extractors. Pl. refer to the following link to know about the book.
http://www.amazon.com/SAP-Performance-Tuning-Shreekant-Shiralkar/dp/0977725146/ref=sr_1_1?ie=UTF8&s=books&qid=1196767811&sr=1-1.
You will notice that the book has screen shots and detailed theory on aspects like indexes like B Tree Index or Bitmap Index to help you identify and improve perfromance of your BW system.
Thanking you in advance for sharing your feedback on the book and its "reference" value for your work.
Shreekant

Performance Tuning of Report without ST05 and SE30

Similar Messages

Maybe you are looking for