Period Activity vs Cumulative value

Hi Experts,
I am running a report that has Period Activity and Cumulative value, the problem is that the Period activity figures and the cumulative value figures are the same. The cumulative value is pulling values = the month being reported ; what do i need to change so that the Cumulative value is not the same as Period Activity?? Thanks, points will be awarded

Hi...i supossed that you have a cummulative value and one differente key figure for period activity....period activity must not be cummulative...
Regards

Similar Messages

Number of days per period cumulated value

Hi,
I am using a keyfigure which gives me number of days per period cumulated.
example
001.2009 002.2009 003.2009
30             61            91
When i multiplying number of days keyfigure with a factor, Its caluculating using before aggregation values. i.e.
001.2009 = 30*factor
002.2009 = 31* factor
003.2009 = 30*factor.
The requirement is to multiply with cumulated values.
001.2009 = 30*factor
002.2009 = 61*factor
003.2009 = 91*factor.
Is this possible? If yes any help greatly appreciated.
Regards,
Suresh.

Hi...
It will answer following questions...
1. How many days for month Feb' In the year 2008?
2. How many days for the month Feb' in the year 2007?
Analyze this program...
data: var3(2) type n.
PARAMETERS: var1(2) type n DEFAULT '2',
            var2(4) type n DEFAULT '2008'.
call function 'NUMBER_OF_DAYS_PER_MONTH_GET'
exporting
    PAR_MONTH       = var1
    PAR_YEAR        = var2
IMPORTING
   PAR_DAYS        = var3.
write:/ 'No. of days in the given month:', var3.
Thanks,
Naveen.I

Differences between Contract Cumulative Value an Release Orderes Value

Hi All
I have found differences in: EKPO (PO Items) and EKAB (Release Orders) tables vs. Cumulative Target Contract value.
The total amount in EKPO net values is grather than Cumulative Target Value in Contract, in EKAB net values as well.
Do you know the considerations that the system are taking?....because the Cumulative value must not be exceeded
Thanks for your tiime.
Regards
Mauricio

I have found the issue, the delivery complete indicator restore the Cumulative Amount in Value Contracts (Quantity = 0). After that, a new PO could be created with Agreement link limited for the amount restored.
So the all PO generated related with the contract could exceed the Cumulative Amount established in contract
Thatu2019s a problem because All PO could be received even though the delivery complete was activated
This behavior is only for Value Contracts
Saludos
Mauricio

User wants to get the cumulative values based on his input.

Hi
I am working one FI Report; the out put values are Cumulative values for Current, Previous years. I developed and it fetches the data last 3 years Cumulative years data without any input FYMonth based on SAPexits and varible offsets. But user wants to put Fiscal year Month as input. So he wants get the cumulative values based on his input. For example, If his input SEP'2005(062005), Then Query gives the Output Cumulative Value (I.e., Sum of Total values of Form APR'2005 to SEP'2005)
Please provide the solution
Thanks
Mannev

Mannev,
You can try doing this.
1. If the user input is fiscal period(2005006) , you can create a customer exit variable which will take the user value (i_step =2), and change the variable value to 20005001. (this is a simple code where tye last 2 digits are replaced by 01).
if the user is entering calmonth, you can use FM - DATE_TO_PERIOD_CONVERT, to convert the month to fiscal period.
2. You can create a rkf with restrictions on time char based on the customer exit variable and the user entered variable.
-Saket

Cumulated values with 0FYTCFP variable

Hi All,
Can anyone write me how to use 0FYTCFP variable to design query with value of current period and cumulated values of previous periods. I tried to use this variable with 0P_FPER to which I manually enter current period, but BEx returns a message "The variable 0FYTCFP couldn't be repalced"
Thanks for help

I can, but I want to use on input variable in for example '010.2005' way and basing on this value dynamically specify the 001.2005-010.2005 period.
Regards,
Maciek

Cumulative values: difference between 3.5 and 7.0

Hi everybody,
I use queries which display an Amount on month.
JAN FEB MAR APR
A1 A2 A3 A4
I modify the Key Figure property to have cumulated values
JAN FEB   MAR      APR
A1 A1A2 A1A2A3 A1A2A3A4
In Bex 7.0, all is right i have my cumulated values
In Bex 3.5, it doesn't work ...
i have the following result:
JAN FEB MAR APR
1   3   6   10   ...
as if i had:
JAN=>Amount=1   JAN-> 1
FEB=>Amount=2   FEB-> 1+2 =3
MAR=>Amount=3   MAR-> 123 = 6
Why this difference between 3.5 and 7 ?
I would like the right result in 3.5,
How do i proceed ?
Thanks for your help!
Rodolphe.

Appararently,
On Bex 3.5 ...
I remplace for my KeyFigure:
Calculate Single Values As ...
"Counting All values" by "Nothing"
and option cumulated activated.
and it does work !!
Rodolphe.

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

How to use a cumulative value in a formula

hi, experts
I have a question about how to use a cumulative value in a formula. Below is the example:
                        wk1   wk2   wk3   wk4   wk5....wk n
sales order        5       10    15      10      5
build plan          8       8     10      15     10
result                3       1      -4       1       6
result row is what I want to get, the formula is:
wk1 result = wk1 build plan - wk1 sales order
wk2 result = wk1 build plan + wk2 build plan - (wk1 sales order + wk2 sales order)
wk3 result = wk1 build plan + wk2 build plan + wk3 build plan - (wk1 sales order + wk2 sales order + wk3 sales order)
I've already ticked the cumulative in properity of the key figures. It seems like that the cumulative results only can display, but can't be used in formula. Could you please help me? Many many thanks !!

Hi
In properties of that formula, there is option called 'formula collision' there you select 'formula from compiting result'. I think this will solve the problem.

Help! losing sales orders in the order list from cumulative value VK13

Hi Experts,
Now we are facing a problem that when user going to check for which orders the condition record was used, the T-Code is VK13.
Path: VK13 -> Display the condition record -> additional data -> Extra -> Cumulative values -> First Sales orders
they found some orders are missing in that list, but in previous system, the list was included all the order numbers which used this condition record, so it's confusing for them to tracking the utility of this condition record.
Can anyone share your idea on it such as 1. whether user exit exists there, what the user exit name? 2. whether configuration should be changed, which configuration should be modified, your idea will be highly appreciated!

Sorry for confusing, the thing is only the first 3 orders of individual month will be displayed. No issue now

The InfoCube contains non-cumulative values

Hi,
While creating multicube for inventory on two cubes its askin the below "The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube)", what is that and how to solve this,
Please through some light on this its urgent.
Chandan

Hi,
Your multi cube is probably based on the infociune 0IC_C03 containing non cumulative key figures taht's why you get this message.
You generaly don't have to maintain validity area unless you are in a special configuration (for exemple loading data from two source systems).
UThe following link should give more information about validity area with non cumulative :
[http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm]
Hope this helps.
Cyril

Maintaining non-cumulative values in Mlti provider

Can we maintain non ucmulative values inteh multi ptovider Extras - > Maintain non cumulative values section.
I created few new cubes which has non cumulative keyfigures . In the cube I made 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.
Now I inlcude the new cubes and identified the non cumulative key figures in the multi provider.
Now here also do I need to make 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.I did not find an option in Extras - > Maintain non cumulative values in multi provider. CAn we maintain non cumulatives in MP ?

Hello,
You dont need to maintain it at the MP level also.
Non-cumulative parameters are manitained only at the cube level.This was the case in 3.x so it should be the same in 7.0 also.
Regards
Ajeet

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

Non-cumulative values

HI All,
when I run a query of a non-cumulative infocube,there's always a "initial record" which actually doesn't exist in the fact table. Documents say "This entry does not remain physically in the table, but it is available for rebuilding the non-cumulative values". So where exactly is the initial value stored ?
Thanks
han.

Hi,
What is teh DataSource and InfoCube?
If you are talking about 0IC_C03, please see the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See about Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Thanks
Reddy

Inventory Management (Non-cumulative values)

Dear experts,
I want to extract inventory data from 2LIS_03_BF.
How do I have to configure the Key figures; for example: 0VALSTCKQTY. Is there a need to use Non-cumulative value with in- and outflow as in Content.
Which other possibilities exist?
After InfoObject config. - what are the exact next steps?
Do I load data from the 3 DataSources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM into one DSO first and then into one cube or do I have to split?
I dont want to use the BC data flow.
Thanks for your advice.
Patrick

hi,
Please search the Forum for this, this has been discussed many times.
regards,
Arvind.

How to use cumulative Value in a formula

Hello Gurus,
I would like to use the cumulative value in a query as part of a formula calculation. I have created a KF which is assigned a constant value 1. When displaying the KF I am cumulating it so for each row I am getting 1,2,3,4...etc. How can I use this cumulated value in a formula calculation?
For example, in a column cumulative count is 1,2,3,4...etc .My requirement is ,i want to identify the record with number 36 , to do this i have created a formula with boolean Equal to function comparing with the required number, but the boolean result what am i getting is Zero instead of one(1).
The reason i found behind the problem is, the cumulative count that we see is dynamically happening during the run time for display ,but the internal value is 1 only.
Is there any other way to meet this requirement or am i missing anypoint?.
Thanks.

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

Period Activity vs Cumulative value

Similar Messages

Maybe you are looking for