PGI not to create without proforma

HI
We have req where we want system to stop PGI if invoice or proforma not created? what's the copy rotuine can be used?
Reg
Shan1242

Dear Shan
Sorry I am little bit confused over the requirement. As you would be aware only after PGI, we would be generating Proforma or invoice. This being the case, how you would like to control.
thanks
G. Lakshmipathi

Similar Messages

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

Excise Invoice should not get created without J1ID data for all material

Dear All,
We have a requirement that excise invoice should not get generated unless chapter ID data is maintained for all the materials in the invoice.( when there is more than one item and chapter id is not maintained for all the items)
At present excise invoice is getting generated for single item which has chapter ID maintained and the items without chapter ID data are left out from the excise invoice. This results in an incorrect invoice.
We want to ensure that excise invoice is not created, unless all the items in the billing document have chapter ID maintained.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Muralidhar, Lakshmipathi,
Thanks for the solution.
I have been able to solve the problem using the user exit mentioned by you.
Regards,
T Saravanan

HT2534 i'm not able create my apple id without credit card. i can't see the option 'none'. what should i do?

i'm not able create my apple id without credit card. i can't see the option 'none'. what should i do?

Did you create a NEW account using the instructions in Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card using an email address you had not previously used with Apple?
You have to.
Maybe that option is not available in your country. It works in the USA

Home directories not fully created - AD with OSX server

Hope this makes sense.
I'm setting up a network in a school. We've an Xserve running Mac OS X Server 10.6.4. So that students can move seamlessly between our windows network and this, we've extended the AD schema and have the Server bound to AD. Clients are running 10.6.4, bound in a triangle with the Mac Open Directory and AD. So far, so good, all works fine.
I've been able to set preferences and network home paths with no major issues and scripted to get around problems with using iMovie. However as we've been awaiting some replacement hard drives to set up a new RAID, the home paths have been set to the share automatically created for Users - so afp://SERVER/Users
Now our new hard drives have turned up. The RAID is setup and working. I've created a new folder to store home paths - just to test with one user initially. I shared this path 'StaffData', enabled it for automount via afp, in protocol I've enabled guest access for afp. I copied the permissions set for the original /Users directory we were using. In WGM I've changed the home path for this user to afp://SERVER/StaffData, saved, then rebooted the client.
When I then login with this user it created the top level home directory - afp://SERVER/StaffData/USERNAME - and then a subfolder for /Library and /Desktop. No other folders are created (Music, Movies, Photos, Documents are all missing). I'm able to get it to generate Music when I load iTunes, but the same doesn't happen for iMovie or iPhoto.
I'm guessing its a permissions issue? When I switch the home folder back to the server's /User directory it creates all the home folders without any issues. Can anyone point me in the direction of a solution to this?

Yep, I always get an error "The home directory could not be created because an error occurred". Always had that, even on the original /Users share that worked.
Kind of found a way around, have written a script to run at login that checks to see if Pictures, Movies, etc folders are present, and if it doesn't it just makes a new directory with that name. It's a bit of a bodge, but seems to still work. Would still love to have another proper fix eventually, but for the time being it's solved the immediate problem I had!
Thanks for your advice.

Spoo Id not geting created while submitting a program at the background

Hi All,
I am submitting a Z program from other Zprogram. I am actually creating a JOB and submitting the Z program. Please find the code below,
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname = p_job
    IMPORTING
      jobcount = l_jobcount.
SUBMIT zpr022_inncometax_report_copy1
    WITH pnptimr6 = 'X'
    WITH pnpbegda = period-low
    WITH pnpendda = period-high
    WITH pnppernr-low = pernr-low
    WITH pnpabkrs-low = 'IN'
       VIA JOB     p_job
        NUMBER l_jobcount
       TO SAP-SPOOL WITHOUT SPOOL DYNPRO
           SPOOL PARAMETERS ls_params
           WITH immediately = space
              AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount = l_jobcount
      jobname   = p_job
      strtimmed = 'X'
     PRDMINS = 2.
      sdlstrtdt = p_sdat
      sdlstrttm = p_stim.
ENDLOOP.
Once the FM JOB_OPEN is called, I could see the job getting scheduled in SM37.
But after SUBMIT and JOB_CLOSE, the job is removed from SM37. But when i go and see in table TBTCP, I could see the job but in the LISTIDENT field i could see 0 which means no spool id is getting created. I want to know why the spool id is not getting created. Please give me your valuable information.
thanks in advance,
Balaji

PL change your SUBMIT statement as below..
SUBMIT zpr022_inncometax_report_copy1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
immediately = space
keep in spool = 'X'
AND RETURN.
~Suresh

How can I verify an apple id already created without attaching a credit card?

how can I verify an apple id already created without attaching a credit card?

Why do you need to verify it? Have you received an email telling you to click a link to do so? - if so it's very possible that it's a scam designed to trick you into entering your credit card details. If you have received such an email don't follow any links in it. If it's not addressed to you by name it's unlikely to be from Apple.
You could copy and paste the email into a post here so that we can have a look at it - remove your own email address when you do this.
If there is some other reason you want to verify the ID please give more details.

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

Master data HR to E-REC standalone system not being created using PFAL

I am trying to transfer data from HR to standalone E-REC system using PFAL transcation.
IDOC transferred with Status 53.
BADIS of E-rec are Implemented.
In e-rec relationship O to S, S to CP, CP to US, CP to BP and CP to P are getting created Properly in table HRP1001.
We are unable to see the data for Infotypes 0000,0001,0002,0006,0105 for the same CP in PP01.
We tried the same scenario with SRM system and there we were able to see the data of above infotypes for a CP.
Table T77S0 are maintained according to the SAP notes.
Please through some light on how we can transfer the data of HR master to E-rec and where exactly we have to check for this master data in E-REC
Thanks in Advance.

Dear Rohit,
Firstly,
No, you cannot have infotypes like how you have mentioned for SRM. This is not how it is in eRecruiting. As Raj suggested, we look at other infotypes of this.
5102 : gives you details about the candidates.Object NA.
5105: Qualification details etc.
For an object P in the system, there is CP. On activating the relevant BADIs, a BP & NA are created for the CP when transferring data from core HR. Now, this does not necessarily mean that all the HR infotypes are transferred to relvant infotypes in eRecruiting. The data is handled differently.
If you are sure that NA exists, then internal candidates are created successfully. Next thing would be to map this NA object with the relevant PA details like name, address,email address etc. For this we make use of the BP object associated with the CP & not the CP or the NA.
So, if you would want to check if the transfer is successful then you go to tcode BP & check if the name & address details etc are the same as the corresponding P for which the NA is created.
To see more of the core HR info, you can check the business partner BUT000 against the relevant BP.
I hope this clears some of your confusion.
Secondly,
Regarding the BADI, I am aware that this BADi is mainly required in an integration implementation scenario. But i think the sample implementation of this BADI CONV_HR_DATA_TO_EREC is required to create internal candidates from idocs.I think this is required for the P to CPBPNA transformation.But if you say the NA is created without this then maybe i am wrong. Please take a second look at this.
Regards,
Sowmya

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

User Home Directory not being created when "Create Home Now" button hit...

This is a cross post, since I was not sure where this should end up since it touches two pieces- Open Directory and User Management. Any help would be appreciated!
I am running OS X Server 10.5. All of my user accounts have been migrated over along with their home directories. Problem is that when creating new users and then assiging a home directory the system does not actually create the directory.
Currently all users are setup to have their home directory setup here:
afp://172.16.110.100/Users/'username'. The Users folder has been setup to automount, and all users that have folders can be accessed without issue.
The problem is when I create a new user, select the aft://172.16.110.100/Users option and then select "Create Home Now" button and save as it requests... it does not create the directories.
I have even tried to change the Home patch to make it local to see if it was an network issue, and used the /Users choice and it will not create the directory in that way either- both location go to the same place.
The system was obviously able to create the local admin account and directory admin account home folders without issue when the system was installed.
The permissions for the "Users" folder are as follow:
directory admin = Read and Write
local admin= Read and Write
system user (root)= Read and Write
admin group= Read Only
everyone group= Read Only
The system is in production, so any kind of server resets need to be done after 5pm, so I have not been able to reset AFP service.
Currently the only services running are AFP, SMB and Open Directory.
All users have their entire home directories located on the server, and login over Directory Access on their clients, so all user accounts are stored on the server. No one is having issues accessing their files or logging in.
I just can not create new home directories when I create new accounts.

You do not have to be logged on as the root user to do this. Launch the terminal and type-
sudo createhomedir -a
I run an XServe with Tiger server ( 10.4.11) and this has been the workaround I have been using.
Good luck.

"The document could not be printed" without an reason!?

Hi all,
cant Print PDF Flattening *80% then get message from reader "The document could not be printed" without an reason!
Document was an PowerPoint and the PDF was created with FreePDF 4.02 and watermarked with PDF4Net.
How can I find out what is the problem?
Thanks
Robert

The default printer is set, the page setup had a printer selected; these did not change the error result. All printers were removed using the Mac OS X printer system reset and added them back. The Adobe "Repair Acrobat Installation" was also used after adding the printers. None of these changed the error result. There is no printer spool created, just the Acrobat pop up error window with "The document could not be printed."

Spool not getting created in batch job

Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
              number   TYPE tbtcjob-jobcount,
              print_parameters TYPE pri_params,
              wv_pripar    TYPE pri_params,
              wv_arcpar    TYPE arc_params,
              wv_val       TYPE c VALUE 'X',
              wv_false     TYPE c VALUE 'X',
              gv_mandt     TYPE tsp01-rqclient,
              gv_user      TYPE tsp01-rqowner.
          CLEAR: gv_mandt, gv_user, number.
          gv_mandt = sy-mandt.
          gv_user = sy-uname.
          job_name = 'DELIVERY_PRINTING'.
          CLEAR: range1.
          range1-sign = 'I'.
          range1-option = 'EQ'.
          range1-low = 'LD00'.
          CLEAR: range1-high.
          APPEND range1 TO range.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              jobname          = job_name
            IMPORTING
              jobcount         = number
            EXCEPTIONS
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              OTHERS           = 4.
          IF sy-subrc = 0.
            SUBMIT sd70av2a WITH rg_kschl IN range
                            WITH rg_vbeln IN deli_tab
                            TO SAP-SPOOL
                          SPOOL PARAMETERS print_parameters
                          WITHOUT SPOOL DYNPRO
                          VIA JOB job_name NUMBER number
                          AND RETURN.
            IF sy-subrc = 0.
              CALL FUNCTION 'JOB_CLOSE'
                EXPORTING
                  jobcount             = number
                  jobname              = job_name
                  strtimmed            = 'X'
                EXCEPTIONS
                  cant_start_immediate = 1
                  invalid_startdate    = 2
                  jobname_missing      = 3
                  job_close_failed     = 4
                  job_nosteps          = 5
                  job_notex            = 6
                  lock_failed          = 7
                  OTHERS               = 8.
              IF sy-subrc <> 0.
              ENDIF.
            ENDIF.
            WAIT UP TO 10 SECONDS.
** to give the data to the printer***
*            CLEAR gv_rqident.
            SELECT SINGLE listident INTO gv_listident FROM tbtcp
                          WHERE jobname = job_name
                           AND jobcount = number.
          IF sy-subrc = 0.
            MOVE gv_listident to gv_rqident.
            CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
              EXPORTING
                spool_request_id = gv_rqident.
          ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh Pandey

Hi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B

DNS record is not dynamically created in DNS Zone, when joining to DNS domain

hi
in my test lab i have deployed two virtual machines (both are windows server 2008 R2 enterprise).
on vm1 i have installed just DNS role (without Active directory) and created a primary non-ADintegrated zone.
on this DNS zone, i have enabled dynamic update set to
non-secure & secure .
now in my vm2 (as a DNS client) , i set the ip address of this DNS server as preferred DNS server and then in system properties, on the primary DNS suffix field, i entered the name of my DNS domain (mydomain.lab)& rebooted VM2, but the a record of this
client (vm2) is not registered (created ) in mydomain.lab zone.
i respect the record be created like the situations which we join a client to AD domain

Hi John ,
When registering DNS record ,client will send a SOA query to find the primary server of the zone .Then send register message to the server .
We can use nslookup to find the problem :
Open Command Prompt
type nslookup
type set type=soa
type zone name
1. If there is positive response ,check the name of
primary name server and the IP address of the server .
Its name should be vm1.mydomain.lab .If not ,edit the SOA record in the zone .
If no IP address ,edit NS record in the zone .
2. If there is no response ,check the SOA record in the zone .
We can manually delete and recreate the records to ensure there are right SOA and NS records .
Here is the guide for using nslookup :
Nslookup :
https://technet.microsoft.com/en-us/library/cc940085.aspx
Best Regards,
Leo
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Hi Leo, thanks for reply.
i did all steps you mentioned but still no result.
i put an screenshot of my desktop here , everything is shown here:

PGI not to create without proforma

Similar Messages

Maybe you are looking for