Photosmart Printer solution centre not working post windows 8 to windows 8.1 upgrade

I have a Photosmart Wireless e-All-in-One Printer - B110a
after upgrading to windows 8.1 from windows 8 the solution centre stop working
i have uninstalled the software and down loaded new software from the hp website
the download extracts but when i click on the install button i get the message
the system cannot find the file specified
have tried running with anti virus turned of
i have uninstall all hp software and reinstalling
i have reinstalled windows 8 and reupgraded to windows 8.1
tried to reinstall the software all with the same result it extracts but when i click on the install button i get the message
the system cannot find the file specified
there seems to be several people with similar problems, is there any solution to this

Personnel Message Sent
JonW
I work for HP

Similar Messages

Solution centre not working for windows 7 and wireless all in one, altho can print ok

I have installed an officejet 6500 wireless all in one on my HP Elitebook running Windows 7 64 bit.
Although the printer installed - albeit with an error for Microsoft.net4 that was resolved after a re reboot - HP Solution Centre v14 wont start. Indicated device installation wasnt complete, plugged in USB and tried to uninstall/re-install all same thing.
Ran Network, scan and print utilities and have MacAfee and firewalls all dis-abled during install. After the error pop up it just closes.
The printer works fine and I can scan through the webscan option but what's happened to solution centre?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Easy Print VI panel not working with 64-bit windows vista

We have a significantly sized application developed in Labview 8.2.1 that is designed to work on a standalone computer. This application uses "Easy Print VI Panel" to print report pages which are basically front panels of various VIs. The application also prints some report pages using the "Print Report" module. Typically we use the application builder and use the generated installer to install the application on a target computer. We also include the appropriate Run-Time engine and NI VISA 4.1. The applications works exactly as designed on all versions of 32-bit Windows (ME, XP, Vista). Now, when this application was installed on a machine running Windows Vista 64-bit, attempts to print reports resulted in a lot of blank pages. I noticed that the report pages that are based on the "Easy Print VI Panel" module were blank whereas the ones that are based on the "Print Report" module were not blank.
To further troubleshoot, I created a very small application. The only function of this application is to use the "Easy Print VI Panel" to print the front panel of another VI that I bundled inside the application. I observed the same behavior.
From what I can tell, either:
1. "Easy Print VI Panel" with Labview 8.2.1 is not compatible with Windows Vista 64-bit
2. The Labview Run-Time Engine 8.2.1 has some incompatibility with Windows Vista 64-bit (I have not tried to install the full development system on the 64-bit Vista computer)
Any insights as to what may be causing this? or does anyone know of a fix for this issue. I am attaching the latter simple test code to the post.
Thanks
Attachments:
test_print.vi ‏18 KB

Sorry Sam, I couldn't get my hands on a 64-bit Vista machine to tinker with your VI. I got a little obsessed with trying to get ahold of a computer to test it out on, that I overlooked actually taking the time to think about the problem. But, now that I'm thinking about it, which operating system did you build this application on? Sometimes an application that was built in another OS than it's running on will have problems caused by the differences in the OS. I'd like to try building the application in 64-bit Vista and deploying it to another 64-bit Vista machine, but unfortunately, I can't test this out myself. My gut feeling is that the application is acting up because it wasn't built in 64-bit Vista, not because the Easy Print VI or the 8.2.1 Run-Time Engine themselves are incompatible with 64-bit Vista. If you can, please test out that theory. That will definitely help determine if it's truly a bug or not.
Product Support Engineer
National Instruments

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

Right click on your Desktop and select Screen Resolution
Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
Then move the slider under Change the Size of All Items to Smaller and restart windows 8

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MY PRINTER SCANER IS NOT WORKING

MY PRINTER SCANER IS NOT WORKING
WHAT CAN I DO

Hello laharpur,
Welcome to the HP Support Forums!
I would like to help with your All-in-One not working, could you reply with the model of printer and the Operating System installed on your computer Windows or Mac?
I will keep an eye out for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

The print tab does not work in mapquest

The print tab does not work in mapquest

You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
Valentin

ValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Uploading files to website not working with Safari in Windows 7

Safari version: 5.1.7
OS: Windows 7
Hi,
I am a website owner, and I have a feature on my site where users can upload large (up to 50MB) music files to my server. The feature works in Firefox on OSX & Windows platforms and it also works in Safari on OSX. The uploading feature is not working with Safari for Windows. Do you have any idea why and how to fix this? It can't be an issue with my server as it works in other browsers fine and works fine in Safari for OS X.
If you have any information on how to solve this or things for me to try to rectify this for use with Windows operating system it would be much appreciated.
Thanks.

GREAT NEWS!!!!
I have solved this issue myself with some help from my a user on Microsoft Forums. The issue stems from the mime type of each Browser Chrome, IE, & Safari for Windows defaults as audio/wav. When the mime type is changed to audio/x-wav everything works. Firefox defaults to audio/x-wav and when changed to audio/wav it DOES NOT work.
Once I input some code in my .php upload page to change the mimetype if audio/wav is detected everything works GREAT!!!
So Here is what you need to do: Find your upload page and input this code:
echo "<p>MIME Type: ".$_FILES["file"]["type"]."</p>";
right before your "If/then" statement of file type. For me it was near line 30 in my upload.php page, but I'm sure this is different for everyone.
This will detect and DISPLAY the default mime type of your browser on the error page when your upload doesn't work. Once you know what mime type works for your file type then you can change your "if/then" statement for mime type upload to change your mime type to the correct one.
I don't want to give the code here, because I'm sure it's specific to your file types and your site construction, but this should lead you on the right track.
***This is the solution if you ARE NOT ABLE to upload any certain file in a certain Browser. It has to do with mime type construction***
I hope this helps others like it helped me!!!!!

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

Boot Camp 3.0, Size 900Mb having Drivers in it, not working On MAC with Windows 7

Hello.
I have installed Windows 7 on my MacBook Pro MD103LL/A without installing its drivers , used Boot Camp to install windows but unchecked the "Download Suport Drivers" for windows 7 and only installed windows 7.
Then on logging into Windows 7 i have installed BootCamp version 3.0 for windows 7 successfully but none of my drivers got updated through it as it showed the updating process while installing on windows but didnt update my windows 7, then i installed Boot Camp 3.1, 3.2 , 3.3 as Update on windows still nothing happened Whats the issue ?? I am not installing the drivers through BootCamp of MAC because it takes ages to download them thats y i found this as solution to install boot camp drivers on windows manually but the solution is not working for me PLZ HELP I shall be hight Thankfull.

Thanks mende1 .
I am receiving this erro on the above link
The requested URL /content/downloads/54/00/041-0694/sq2RLp7XVNQzRG8qdpsq9sj4pHsgXkgPYg/BootCampES D.pkg was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at swcdn Port 80

Buy App button not working iTunes 10.6 Windows 7 (used to work)

Hello Community - color me stumped beyond compare...
I can no longer make purchases of apps (free or otherwise) using my Apple ID on iTunes 10.6.1.7 on Windows 7. It used to work as of Tue 10/2/2013 around 8pm. Later that evening it stopped working and hasn't allowed a purchase since. Clicking on FREE APP button or {PRICE} BUY APP button, visually makes the appearance that the button is clicked but doesn't do anything after that.
If I'm logged in to iTunes using my account - it visually makes the appearance that it the purchase button is clicked and does nothing. If I'm logged out, it visually makes the appearance that it is clicked and it doesn't ask for me to log in like it used to.
I've tried several solutions, all of them fails. I've conducted closed experiments, and still cannot isolate the solution.
Not wanting to go to iTunes 11, I upgraded to 10.6.3 (64x version) iTunes for Windows 7, and got the same non-responsive results.
I've had someone try to download on their system (they were using iTunes 11 on their PC) and it downloadeds using my Apple ID account.
I've rolled my PC's Win 7 system settings to a previous day when it was working, and it's still not working back to iTunes 10.6.1.7.
I've check iTunes diagnostics / firewall settings and although the iTunes diagnosis says: "Windows Firewall is on." AND it says "iTunes is NOT enabled in Windows Firewall." this is not accurate as iTunes is showing firewall enabled in Windows. (see image)
I've reset my modem/router (which is wired to this PC)... still no downloads.
I'm just stumped - anyone else experiencing similar issues or has anothe idea for solution?
I've ask for Apple's help but have not heard anything in 24+ hours, so I'm reaching out to the community.
Thanks in advance!
PS: The downloads have also stopped on an older laptop using my ID on an older iTunes using wireless to the same modem/router whereas downloads used to work on that laptop.

UPDATE: Welp - my solution was downloading iTunes 11; it restored the ability to purchase items. On the minus side I already miss coverflow, but on the plus side my appnabbing hobby is back on track... 240 downloads later. Missed out on 20 travel apps and a smattering of some others that went free and went back to sale price during the 2+ day "outage", but that's alright - they'll be back to free in another 2 years.
The rest of iTunes 11 is not as bad as I thought; it will take some time getting used to it. You might miss coverflow display view as you only get TILES view or LIST view to choose from. Also, within the Apps Library it does not give you a count of the number of highlighted apps like iTunes 10 did. I'm sure that was an oversight in design - likely to comeback in another version.
Although you can no longer double-click a category to create break-out windows as iTunes 10 allowed, I was happy to see you can get a separate download window if you click the DOWN ARROW next to search field while something is downloading. That's a plus.
Apple Support has only reached out once during the 2+ days to suggest logging out of iTunes, close the program, and re-launch / login and try to download again. (by the way, that did not work). If I waited one day apiece to try out seven different trouble-shoots one at a time, I'd be a week into trouble-shooting with no solution in sight.
If you are fearful as I was of iTunes 11, don't be. It works... just not like how you remember. Plus you can always go back and get a previous version of iTunes for PC - just Google keywords: "archived versions of itunes pc" (without quotes). The first hit is comprehensive. The site used to have MAC archived versions, but no more; I have not tried searching for Mac archive.
Cheers!

Print queue does not work

Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
5) Also the verification of the temporary files find no problems.
In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

GUI JAVA 7.20 rev.2 (on Mac OSX 10.6.3): Print preview does not work!

I've just started using rev 2 of java sapgui and print preview is not working anymore.
Client: OSX 10.6.3
SAP: ERP5.0 on WAS 640
Has anyone experienced the same problem?

This is the output in console when print-previewing:
I'm going to open a support message as adviced.
<code>
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]     Exception in thread "Loader for htmlViewer8_XZ_7" java.lang.NullPointerException
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.updateColors(FrogListUI.java:63)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.propertyChange(FrogListUI.java:48)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:318)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.awt.Component.firePropertyChange(Component.java:8233)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.firePropertyChange(JComponent.java:4428)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.setEnabled(JComponent.java:2638)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.setEnabled(ActionsPanel.java:418)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.<init>(ActionsPanel.java:106)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.setGUI(AnnotationPanel.java:128)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.<init>(AnnotationPanel.java:73)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildAnnotationPanel(SwingViewBuilder.java:1574)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityTabbedPane(SwingViewBuilder.java:1541)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityAndDocumentSplitPane(SwingViewBuilder.java:1501)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildContents(SwingViewBuilder.java:499)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildViewerPanel(SwingViewBuilder.java:482)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.pilots.pdf.ThePilot.createComponent(ThePilot.java:149)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.setPilot(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.append(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_clear_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_render_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.runAsynchronousLoad(VCDO)
</code>
Edited by: Lorenzo Nicora on May 4, 2010 10:52 AM

Photosmart Printer solution centre not working post windows 8 to windows 8.1 upgrade

Similar Messages

Maybe you are looking for