Physical Path for Essbase Studio Cubes

Hi All,
I have one doubt regarding Cubes developed in Essbase Studio.I want to know the extact phyical existance path for Essbase Studio.
Currently we have an space constraint for Essbase Studio in Server.So,Is there any possibility to change the cube path in Essbase Studio where we have sufficient space.
Can some one provide assistance for this issue
Thanks,
SatyaB

Hi All,
Currently Iam facing with Cube space allocation.
Essbase Applications is installed in D: .Currently D: has only 2GB Disk Space only. So, They want to point out the applications in E: drive which contains sufficient space.
Can someone suggest me where I have to make changes in settings to build and load the cube in E: instead of D: drive.
For your reference
1. Building and Loading of cube is happening through Essbase Studio.
2. EPM Version : 11.1.2 (Platform : Windows)
Should I need to make changes in EAS Console edit properties. Please Advise. Thanks in Advance.
Thanks,
SatyaB

Similar Messages

Solution to Errno:7 in MaxL for Essbase Studio redeployment scripts

This is an answer to an archived forum post that I found via a Google search. The forum post no longer accepts replies. The forum post contained an unanswered question about how to resolve "Errno:7" in MaxL in release 11.1.2.3 when trying to redeploy an outline through Essbase Studio.
I encountered the same error in a client environment and could not find any resolution or references to this in the Knowledge Base, patches, release notes, etc.
I wanted to post the resolution that worked for me, in case someone else encounters Errno:7 in MaxL.
In this particular instance, the MaxL "deploy outline" script worked fine until we upgraded 11.1.2.1 to 11.1.2.3. After upgrading, we could still connect to the Essbase Agent via MaxL, but the "deploy outline" script fails with "Not able to connect to BPM Server. Errno:7" and "BPM Connect Status: Error". No evidence of the error could be found in the logs for the Essbase Agent, the Essbase application in question, and Essbase Studio. Using the Essbase Studio Console to redeploy the outline worked fine.
The root cause was learned when we ran the EPM Registry Editor to view a registry report. The report showed that while Essbase Studio was correctly listening on port 5300, the web port was still on the old 11.1.2.1 port (9080) instead of the port 11.1.2.3 was expecting (12080). This port number is not exposed to us if we go back into the EPM Configuration tool and drill down to Essbase Studio. The config tool only allows us to change the relational database connection and the "datafiles" folder location. Running "netstat -na" from the command prompt confirmed that the server was listening to 9080 instead of 12080.
Using the EPM Registry Editor command-line tool to update the port's property value and then restarting the Essbase Studio service fixed the issue for us. If you read the Essbase Studio documentation as I did, you may have had the impression that editing a file on the server would do the trick. But the Readme for Essbase Studio 11.1.2.3 provides the real answer:
"Starting in Release 11.1.2.3, the following Essbase Studio server properties are stored in the
Oracle Hyperion Shared Services Registry database.
The 11.1.2.3 Oracle Essbase Studio User's Guide describes all server properties as being in the
server.properties file. To view or modify the settings in Shared Services Registry, use the
epmsys_registry utility, described in the Oracle Enterprise Performance Management System
Deployment Options Guide."
I hope this helps and good luck!

Hi Santy,
Here's the original forum post: Essbase Studio Cube deployment via MaxL error
In that thread, someone had questioned if an 11.1.2.2 MaxL client could still connect and bypass the error. I happened to have a laptop handy with the 11.1.2.2 MaxL client installed on it and was able to test that. The 11.1.2.2 MaxL client got the error as well.
In my 11.1.2.3 environment I tried both the 32-bit and 64-bit MaxL runtimes and verified both were on the latest available Essbase patch set for 11.1.2.3. Again, they still got the Errorno:7 message. The problem was only fixed after updating the "server.httpPort" property value via the epmsys_registry tool.
Regards,
- Dave

Essbase Studio Cube Migration

Hi All,
We have a requirement where we want to migrate our Essbase Studio Cube from one environment to another. We want to migrate the entire catalog/models/cube/data.
Can anyone mention the correct sequence to follow.
(Version: 11.1.1.3)
I was trying to search this in forum; I found that the cubes can be migrated via LCM while the catalog migration is difficult.
Also please verify my understanding:
1. LCM cannot be used for Studio v11.1.1.3.
2. The catalog export/import option is not available for v11.1.1.3. It was introduced for v11.1.2.
Any response will be highly appreciated.
Thanks.

LCM still does not support studio in 11.1.2.2
11.1.2.0 Studio New Features - "In this release, you can replicate the Essbase Studio catalog database among different machines for various administrative purposes, such as making catalog backups, restoring the catalog, and moving the catalog from one machine to another. Essbase Studio now provides an option to export the catalog into an XML file. This file can then be imported to a new location or a different machine to recreate the catalog. You can selectively copy some catalog objects, export to an XML file, and then recreate these objects in a new location or on a different machine."
Cheers
John
http://john-goodwin.blogspot.com/

Need FM to find physical path for given logical path

Hi Guru's,
I wanted to find the physical path for the given the logical path.
I have a requirement where i have to write records into the file mentioned via logical path .Inside the program i wanted to fetch the physical path for given logical path .
Is there any FM to achieve this functionality.
Thanks!!
Pravee

Use fm FILE_GET_NAME to get physical file name from a logical file name. But u have to maintain the mapping between logical file name and physical file name in tran. FILE.
     call function 'FILE_GET_NAME'
          exporting
               logical_filename = lds_name << Logical file name
          importing
               file_name        = ds_name << Physical file name
          exceptions
               file_not_found   = 01.
Regards,
Joy.

Essbase Studio Cube Deployment SQL Connection Error

Hello,
Has anyone seen this error in studio.
Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Accounts)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
I connected to the SQL database without issue creating the data source and I can view the sample data on the dimension element. The only time I have a connection issue is during cube deployment. The log is no help.
Thanks

Hi Celvin
Thanks for your reply.
I can connect from the same Essbase Server from the data source connection used in the Essbase Studio console.
I am not using any encrypted passwords.
I can log into MaxL with no issues, but running trying to execute the following command is where I get the error.
deploy all from model 'GL_Analysis' in cube schema '\ANALYSIS\Schema\Schema' with option delete_members login $1 identified by $2 on host 'server1' to application 'test1' database 'test1' overwrite values using connection 'essbaseserver' keep 200 errors on error ignore dataload write to default;
It allows me to connect and deploy sucessfully using the Maxl installed from the Essbase client version 11.1.2.2. However running the MaxL installed from the Essbase client MaxL version 11.1.2.3 seems to provide me with the connection issue. I am trying to determine if it is a bug or something that was missed during upgrade process.
Currently we need to deploy via the Studio.
Thanks.

Essbase Studio Cube Stores data as integer, drops decimals

I have an Essbase cube that I am developing in Essbase Studio 11.1.2.1. If I preview the data in Essbase Studio I can see the decimals for the number. However, when I deploy the cube the numbers are not stored in the Essbase cube with the decimal places. So for example I have a value of 106,257.58 on a certain intersection of data that I can see when I preview the data. However, when I querry the data in the cube after it is built it shows as 106,527.00. It is not rounding up, but instead just dropping the decimals.
I have also noticed that if I take a numeric field and do a math equation in the dimmension element, when I preivew the data in key bindings it also drops the decimals. But if I view the data in caption bindings the decimals show.
Is there a global setting where the numeric format is set? It almost seems like it is default to store numeric fields as integers and not with decimals. Any help is appreciated.

The first error is because you have the dimension set as stored either change it to multiple hierarchies or dynamic and it will allow shared members
The second error is because the first instance is getting tagged as the shared member. in 11.1.2 this is changed so Essbase automatically detects this issue and corrects it automatically
You are probably getting it because both your primary and secondary hierarchies are getting build intermingled
suppose you have your example
PRODUCT (Gen1)
Soda (Gen2)
123 (Gen 3)
747 (Gen 3)
Juice (Gen2)
555 (Gen 3)
747 (Gen 3) (shared member)
Water (Gen2)
111 (Gen 3)
747 (Gen 3) (shared member)
If you build this as a parent child recursive build and the order of your data file is
Parent Child
Product Soda
Product Juice
Product Water
Juice 747
Soda 747
yiou see it would add the 747 to juice first so the Soda would get shared. You would need to change it so the Soda 747 would be seen first

How to Configure logical path and how to retrieve physical path for an IDOC

Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit Rungta

Using Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
      FORMAT(3),
      FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
     EXPORTING
          LOGICAL_FILENAME        = 'MYTEMP'
          OPERATING_SYSTEM        = SY-OPSYS
          PARAMETER_1             = '01'
     IMPORTING
          EMERGENCY_FLAG          = FLAG
          FILE_FORMAT             = FORMAT
          FILE_NAME               = FNAME
     EXCEPTIONS
          FILE_NOT_FOUND          = 1
          OTHERS                  = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag      :', FLAG,
         / 'Format    :', FORMAT,
         / 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System.

Essbase Studio Cube Deployment Error

Hi,
I am trying to deploy a cube using essbase studio 11.1.1.3.00. I am getting this error.
\\Record #1203 - Unable to write smartlist 801990, error code 1060301
Any ideas what the issue is? I can't find anything on the error and I don't have any idea what smartlist would have to do with the deployment.
Thanks in advance

Hi,
I assume that the Essbase studio version is 11.1.2 and above.
The error is caused by the Essbase Studio Server failing to establish a connection with the SQL Database Server and you can try the following:
1) Back up the server.properties file and alter it in the following manner:
Change the server.essbase.streamingCubeBuilding=true to server.essbase.streamingCubeBuilding=false (use Essbase drivers)
2) Set the ODBCINST variable to point directly to odbcinst.ini
3) Then, the BPMS service should be restarted.
The file is named:
startBPMS_bpms1_Server.bat on Windows;
startBPMS_bpms1_Server.sh on UNIX.
Note:
The Essbase Studio Server startup file contains the commands necessary to start Essbase Studio Server. During the configuration process , the EPM System Configurator writes information to the startup file about the computer on which Essbase Studio is installed so that Essbase Studio Server can start properly. Oracle recommends that you do not manually edit the startup file.
The start up file is installed by default in:
MIDDLEWARE_HOME/user_projects/epmsystem1BPMS/bpms1/bin
KosuruS

Excel Addin Pull error from Essbase studio cube

Hi There,
I have cube deployed from essbase studio with dupilicate member name enable. however user gets error "unable to resolve duplicate name "2010" on line 1" error when using Excel addin and SmartView. I guess I have year 2010, also have account 2010, but it build and deploy fine.
Any suggestion?
Many thanks
Edited by: Donny on Jul 28, 2011 5:29 PM

I think I figure it out

Physical path for XML created of program RTXDART_PT

Hi guys,
where does the program RTXDART_PT save its XML file? What is the physical path location?
Thank you!

Specify the full path in file name box when executing it, example:
/usr/sap/AAA/SYS/global/DART/PT.xml
Much better than searching for the files......
Good luck with DART files

Physical Path for KM Documents

Hi,
I would like to know the path for the physical location of the documents that I have uploaded into the Portal.
(EP6 SP9)
Regards,
Harish

Hi Harish,
to complete this issue:
(a) CM-Repository:
(a1) DB: As already said, nothing is saved within the file structure.
(a2) FSDB: Under the "normal" structure which is mapped within the CM Repository Manager settings; this only for the "etc" repository is the path given above.
(a3) DBFS: Under an internal structure of the directory mapped within the CM Repository Manager settings
(b) All other repository types depend on their types. Filesystem repositories for example of course - are mapped filesystem structures.
Hope it helps
Detlev

MaxL script deploy essbase studio cube

Hi There,
I am testing my MaxL script deploying cube from essbase studio, here is result from my cmd windows:
BPM connect status: success
BPM maxL deployment ... succeeded with warning.
How do I find out the detail about the warning? I assume it is essbase studio log at C:\Hyperion\logs\esbstudio
But I did not see any warning message.
Thanks

Thanks John and Glenn, I just check my app log, the warning I found is:
Warning(1013254)
Hybrid Analysis spanning cannot be enabled on database [test] in application [test]. Check if the database has Hybrid Analysis and if span into relational source is enabled.
I am not sure I understand this.

Physical path for KM documents and folders in WAS

Dear All,
Could you please help me in finding the physical path of the KM Content stored in the back-end WAS.
Helpful answers will be rewarded.
Thanks
Prabhakar M

Hello Prabhakar M,
In the Details of your Document.
Click on Properties.
Under Properties, Click on Access Link.
Under Access Link, there will be WEBDEV URL
Webdev URL is the path where your Documents are Stored.
Also, it is highly dependent on type of Repository.
All the 3 modes of CM Repository have different ways of Storing.
Kindly share, the mode of repository you use?
Regards,
Chinmay Joshi

About the physical path for data archive

Hi guys,
Now we're doing the archive work.As our PRD system is a CI+DI system which has two servers just let me
call them 63 and 64 here.We mount a media on 63's root directory.So 64
cannot recognize the media indeed.And the background job of delete
programs,in fact,are dilivered on the two servers depend something like
load.
So parts of the jobs finished,but others are unsuccessful.
Now I don't know why the 64 server cannnot recognize the media's
directory.
How can I solve this problem?I've configured the directory parameter in t-code AL11,but it still only can be recognized by 63 which the media mounted on.
Now I have two ideas about this.
One is that using FTP to read or write files,so it has nothing to do with mount on which server.But I don't know whether it works and how can I do this.
The other is that using SAMBA to mount the media which is an area of a Windows Server onto the 63 and 64 servers simutaneously.
Do you have some much better advices?Please give me some advices.
Thank you very much.
Brooksq
Moderator message: not related to ABAP development, please search for a better SCN forum for your issue.
Edited by: Thomas Zloch on Mar 2, 2012

The only product I'm aware of is the Griffin Cable Lock.
My personal preference is for a bike cable lock through the hole in the stand to an eyebolt in the wall behind.

Essbase Studio Fails Validation - Incorrect Server.properties path

I've tried to figure this out on my own, but I just can't seem to get it.
During the validation script of EPM 11.1.1.3 (Windows Server 2k3), I get the following error for Essbase Studio:
Start running Essbase Studio Server
Essbase Studio Server failed.
Connecting to Essbase Studio Server... - failed
Error:Logging configuration file is not found. Expected filename is D:\Hyperion\common\validation\9.5.0.0\.\server.properties
Network communication with the server failed
Clearly, it looks like the path is incorrect (the extra .\ between 9.5.0.0 and server.properties)
However, I can't seem to find where this path is set. I've looked at a bunch of the files that make up the validation script, but they seem to point to compiled JAVA files that can't be edited.
Anyone have any ideas around where I can correct this path?
Of note, Essbase Studio does in fact work, I just want to fix this validation script so that any real issues will be pointed out.
thanks
Edited by: PtotheC on Jan 20, 2010 4:12 PM

Also, this error causes it to FAIL the validation that is generated.
Essbase Studio is RED in the HTML that is generated.
I would assume if it is common, other people would be noticing that too?

Physical Path for Essbase Studio Cubes

Similar Messages

Maybe you are looking for