Picking two-step type of material on consignment

Hi experts
I have a problem with the processing of materials on consignment at the time of the assignment sends message: Unable to determine location.
when the force generated OT be displayed on the field LT03 Stock Special (SOBKZ) is in white, and also the special Stock Number field (LSONR) that would be the supplier code of this blank.
Anticipation is running the store takes 701 to 200 and the program work well.
when I run the allocation step 2 with the movement of 601 a outlet delivery of output gives me the error.
Please any indication. thanks in advance.

Thanks Csaba Szommer,,
the material that you work is an appropriated of supplier
1 .- The error that comes out is the number L3 008 has not been able to determine location.
2 .- The strategy of the first shot goes well, I attached the lot predefined in the delivery of output and well-executed strategy to get the material from shelves
119 A ESF k 701 101 104
3 .- The system takes the material of the type of store 701 and brings it to the 200 with a fixed location, taking the number of group linked to the supply of output.
4 .- by the LX39 I run the second step allocation, at that time that I run the collective process, the system tells me that has not been able to determine location.
5 .- Seeing the protocol for determining locations tells me
119 2 ESF 200
if he realizes not see a particular stock's identifier K, therefore the system routed to the stock itself when the material is consigned. therefore can not identify the Lot proposed in the delivery of output.
si me puedes decir tu Imail te puedo enviar copy de las pantallas

Similar Messages

Conflict between local and global step types

I'm making some changfes in some previous programmed Step Types and I'm having conflicts. Is it posible to make global Step Types? I have some sequences that have another step type with the same name as the global and it appears the Type Conflict Dialog box. I'd like to use in all my sequences always global Step Types. Can I do this with TestStand 2.0.1?

Hi again,
For both Step Types A and B, I've inserted an "Edit SubStep" (inside Tab Substeps in the Step Type Properties). Those associated programs are written in LV. That means that when I insert one of my steps types in a sequence, if I click the right bottom, I have the possibility to make changes in this Edit VI and save those parameters in TestStand. I attach you the two Step Types that have the conflict, maybe you can see the problem. Have a nice weekend!
Angel
Attachments:
PXI-6025E_Digital_IO.zip ‏593 KB
Tilt_Adjustment_Service.zip ‏283 KB

TWo-Step Picking

Hi,
We have a requirement to perform two step pick - that is the system needs to create Two TO's
1. one for the picking material from the racks into a interim location in our case it would be Tub's - so the first part is confirmed when the material gets picked from the rack into tub.
2. Once the material is all picked the tub's are moved into Packing area -- where the material is once again verified and packed and in this process the user confirm the second leg. which moves it into the interim storage type of 916
3. After the two to's are confirmed they system should let the user perform the PGI.
I did check the documentation for Two-Step Picking on the SDN and have done the config accordingly but now the system is throuwing up error while converting the delivery into TO it says the grouping has not been done.
Not sure what am i missing - could you let me know the steps that need to followed to get this working.
Regards
Havish

Hi Sudhir,
Thanks for the reply, I did create a Group for type " K ".
The above error comes up while creating the TO (for stock Removal), but srprsingly when i run the LT72 it says the group does not exist.
I have done the following:
LE> WHM-> Activities->Transfers-> Set Up 2 Step picking --- put in the details for the WH as required
LE> WHM-> Interfaces--->Shipping ---> Two-Step picking -
put in the details for the WH as required
Created a Delivery --- VL10b
Created A group for the above delivery -
VG01
Now when I check for Group under LT72 is says the group does not exist
also when i try to create the TO for the group it throws up the as per my earlier post.
Could you guide me what is the mistake am doing
Regards
Havish

Two step picking modification

Hi all,
Three simple questions on two step picking:
1) When I delete a pick TO inthe first step of two step picking process the status of pick step on the group still reamains completed and I cannot create pick TO again. How to sort out this?
2) If the pick TO is not created yet I'd like to add another TR to the group. But I didn't find a change group transactions. Once the group is created, it looks like no modification is possible but editing two step relevance on some group's item. How it is expected to do this?
3) How to set a storage type not relevant for two step picking? I've seen that only materials can be set as relevants for two step picking.
Best Regards

Hi
Let me explain how two step picking works
Within the 2-step picking process the first step can be repeated many
times because changes of the assigned deliveries may occur or the
requested quantities are not completely available the first time but
the 2nd step the actual picking is done once and marks the completion
of the process. This cannot be repeated for the reference number. If
there are individual delivery changes the TO can be created using LT03
but the multiple processing is no longer possible.
TO confirmation takes place only when the stock is completely moved.
It would not make sense to confirm the movement and then to the
allocation step. The two-step picking process is
1. Pick step (Where stock is picked from the source bin)
2. Allocation step (Where stock is allocated in the destination bin)
3. Confirmation (Where the picker confirms that the movement has been
completed)
You either carry out the first two steps seperately (2 -step picking)
or at the same time. Either way, the confirmation always takes place
last. Hope the above helps to clarify.
Regards,
Ramana
Edited by: A.L.V Ramana on Dec 18, 2009 1:05 PM

LT45 (Picking Progress) and Two Step Confirmation

Dear all,
I have Two Step confirmation in place for one WM movement type and I am happy with it.
We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
Much to my disappointment I cannot see such a distinction in LT45.
Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
Thanks!
Sandeep

Ananthram,
Thanks for reading my Question.
I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
(Confirmed, Half confirmed, Open)
Thanks again for taking the time.
Sandeep

Warehouse Managment (Two-Step Picking)

Hi,
This is with reference to Two-Step picking procedure, which is not getting activated. Though we have done all customization required for TR and Deliverys as well, as referred in the documentation provided by the SAP. The settings done are as follows.
01)     Activation of Two-Step picking at WM Global level.
02)     Transfer Requirement control
03)     Transfer type control
04)     In article master, relevant for two step picking.
05)     At Storage type search level.
Now when try to initiate the process with transaction LT41 putting shipment type i.e. A (Stock Removal) system displays a message No data available for the specified criteria or if thru LT0E, system asks for a group in WM.
But when we go and try to create the single TO thru Delivery using t_code (LT03) system displays an information message, i.e. Two step picking relevancy will be lost.
Regards,
Aquil Husain

Hi Aquil
Have you set up Group processing for TR and Deliveries?
In order to manage 2-step picking you have to work with groups / collective picking
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Have a look at the help to review the process
Regards
Steve

Inspection type for STO with delivery and billing , two step procedure

Dear All,
We've STO scenario between two company codes, plant '1000' of company code '1000' supplies goods to plant '2000' of company code '2000' using STO. We'd like to evaluate the supplying plant for vendor evalution with respect to receiving plant,
Please suggest , which inspection type '01' or '08' needs to be activated in the material master in receiving plant '2000' in order to consider the supplying plant ' 1000' for vendor evalution. and kindly let know me that whether the functionalities of QM procurement (Checking receipt of certificate while posting MIGO) can be used in STO scenario similar to normal procurement scenarios,
Here, we are going for STO scenario of two step procedure with outbound delivery & billing.
Thanks & regards,
rajesh

The inspection type '08' is used for stock transfer order process.
In SAP standard you can't evaluate the supplying plant but external vendor only.
Also the functionalities of QM procurement can influece or control it when materials are procured from external suppliers.
If you want to use the functionalities of vendor evaluation and QM procurement, I would suggest you implement normal procurement process, not stock transfer process.
Regards
Luke

Activity step type picks wrong agent during runtime.

Dear All,
             I created two activity step types.Both these should pick two different agents at run time from ztable.
First activity step type picks the right agent.The second activity step type should pick another agent.Instead it picks the same agent as picked for the first activity step type.
            I use two different workflow containers to pass values to rule containers.
Following is the binding sequence between workflow to rule container and vice-versa for first step type.
&WERKS&    -->      &WERKS&
&AAGENT& <--      &_RULE_RESULT&
Following is the binding sequence between workflow to rule container and vice-versa for first step type.
&WERKS1&    -->      &WERKS1&
&AAGENT& <--      &_RULE_RESULT&
Both these rules fetches the right agent at PFAC when simulating the rule resolution.
Only the second rule returns the wrong agent who is the approver for the first activity step type.
Please suggest if I am any where wrong for which I will be grateful.
Thanks and regards,
S.Suresh

Dear Pavan Bhamidipati,
                      Thank you so much for your reply.
                      My scenario is whenever a purchase order is created for a particular plant,it should go for a two level approval.These two agents will be selected during run time from ztable.
                       For example, if purchase order is created for plant 1000,it will go for a two level approval to a set of agents.If purchase order is created for plant 3000,it will go to another set of agents for two level approval etc.
                       The rule I have created fetches the right agent.But when I intetrgrate it with workflow, I get the correct first agent for first level approval.On the other hand,for the next level approval,again I get the same first agent incorrectly.Instead I should get another different agent for second level approval.
                       Following is the code I use now::
FUNCTION ZWF_TST_RULE7.
""Local Interface:
*" TABLES
*"      ACTOR_TAB STRUCTURE SWHACTOR
*"      AC_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*"      NOBODY_FOUND
INCLUDE <CNTN01>.
DATA :   agent2 like Zworkflow1-agent2,
         werks like zworkflow1-werks,
         werks1 like zworkflow1-werks,
         lines TYPE i.
swc_get_element ac_container 'werks1' werks1.
select single agent2 from zworkflow1 into (agent2) where werks = werks1.
ACTOR_TAB-OTYPE = 'US'.
ACTOR_TAB-OBJID = agent2.
APPEND ACTOR_TAB.
    DESCRIBE TABLE actor_tab LINES lines.
    IF lines IS INITIAL.
      RAISE nobody_found.
    ENDIF.
My ztable has 5 columns namely MANDT,SNO,AGENT1,AGENT2 and WERKS.
Correct me if I am any where wrong for which I will be greateful.
Thanks and regards,
S.Suresh

Report to track interlinked movement of a material in a two step transfer

Request your input for the following
The scenario is that the stock transfer from one storage location to the other happens a two step transfer (313 and 315). To track the invenotry movements they want a report on a daily basis (gap of 24 hrs, 48 hrs etc) which can list down all the details at item level for materials for which the movement type 313 has happened but movement type 315 still needs to happen and the time gap between these two steps (i.e wether it has been 1 day or two days. etc.).
Is there is a standard report for movement types which are interlinked (like in this case 313 and 315 ) through which we can track what is the time gap between the first and second movement type and how much stock is waiting for the second step to happen before it can be avaialable to sell.
Thanks

Hi,
Refer report MB51
here in selection screen enter mvmt types 313 and 315 and execute
Here add following fields in layout;
Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

Report for field sammg and refnr in two step picking

Hello Experts,
I have configure two step picking which is working fine.
But my concern is when I create a group from deliveries using VL06P, an five digit number (23717) is generated. But while putting same group number in LT72 screen for analysis or doing LT0E, I am getting en error that "this group number is not existing in system.
Then I have to go to SE16 and search in table T311. Then I found that there are two group number in this table which technical name are REFNR and SAMMG. So I have to pass 23717 in SAMMG field and note down the number (17) from REFNR field and process with REFNR number.
So is there any report whether I can get the same (when I pass SAMMG number I will get REFNR number) because my business user don't have access to SE16 again it is not acceptable to business.
Or is there anyway by which I can assign same number to both SAMMG and REFNR, so that my client will refer only one number in stead of two number.
I am hereby attaching one test data. Kindly go through it and revert to me with your analysis.
Best Regards,
Raghu Nayak.

as an standard SAP you should be able to process the group number(23717) it seems there is some other setting / customization or you are following any additional steps in your system which generates the another number in Group (REFNR) field of T311 as in my case i am getting the same number in both the Group field
Have a look on the below mentined existing wiki which was shared earlire by SCN member Susheel Tiwari / Pankaj Agarwal
Two Steps Picking Process in SAP-WM

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Two requirement type determined for PIR of a material

Hi Experts,
I have a scenario wherein for one of the material with stragety 50, when the PIR is getting transferred from one info structure to Demand Management (Version A0) i get two line items for the same demand in MD63. I.e one line item with requriement type VSE and another line item with requirement type VSFB. The transfer is through a custom program.
What could be the reason for this? Why two requirement types are determined for the material? What is the determining factor?
Thanks in advance for the response
Best Regards,
Ganesh

You mean that the two line items in MD63 belongs to the different version ; active and inactive one?
Several things you can check.
1 First check the MC7F whether configuration of your info structure is link to DM automatically (in Sync with Demand Management section). If you create the transfer again, it may have duplicate records in demand management.
2. Do you use the mass processing to transfer the data? If so, please check the activity. If you set the transfer twice, then it is duplicate.
3. Maybe someone maintained them manually and enter the requirement plan. Normally the transfer from SIS will have blank requirement plan. Maybe you can check whether the requirement plan is maintained for any of the lines (in the item tab).
If you can do the screen shot for us, it will be very helpful to analyze.

Material loss tracking in two step transfer posting with in plant

Dear Friends ,
Here the case is material will going loss when shifting one storage location to another , here i am using two step procedure . so how can i track rhe loss here . our client want to post loss value to production account only and also they want to know total loss in report . How it can be maintainable?.....which is right method for this .
RB

Hi,
You can scrap the material that underwent losses either at issiuing location (reverse GI for that much qty) or at the receiving location (do GR then scrapping).

WM - Two Step Picking

Hi experts,
I have a problem with a program I'm creating.
In this program I'm doing a call transaction to LT03 for an outbound delivery.
When I do that, the message number L3 720 "2-step picking relevance will be removed since no relevant group" which is normally a Warning Message is appearing as an error message.
When I go through debugging, in the code, it also appears as a warning message, but when I execute it online it appears in red.
Does any one has an idea on that issue ?
Thanks in advance.
Best regards,
Remi

Hi,
Thanks for your reply.
All the materials go through a two step picking process in my business process.
So each time I create a picking process, It is put in customizing that the field "Relevant for 2 step picking" is marked by default.
The problem that I have is when I want to do a picking without the 2 step process.
It is a warning standard message, and It's working fine online but when I'm doing it through function module L_TO_CREATE_DN, instead of a warning message, the systems shows it as an error message and does not let me go through the rest of the process.
Moreover when I go through the debugging function the message is MESSAGE W720 where W is "Warning".
I don't understand why online, the system gives me a warning message and through function module, the system gives in the code a warning message that appears as an error message on screen.
I anyone has an idea it would help me.
Thanks.
Remi

Two-Step picking in Lean WM.

Hi all!
Is it possible to configure two steps picking when you have a Lean WM implanted? My client wants to explore the possibility to use this functionality in his warehouse, but he has a lean WM, not a full one.
I have configured IMG --> Logistics Execution --> Warehouse Management --> Interfaces --> Shipping --> Two Step Picking
In my tests, I have grouped the deliveries and when try to create the correspondent TO, system sends a message saying that it is not possible in a Lean WM.
We are using SAP ECC 6.0
Thanks for any help.

Hi
Lean warehouse management implement for the warehouse where proper storage bin (High rack structure or location management) are not available and user want to do the picking using pick list. In this case there is a dummy bin defined in the system which helps the user to group the deliver and create a transfer order.
To leverage the 2 step picking functionality of warehouse management you should have proper location management ( Warehouse management) activated.
Hope this will help
Regards
Manish

Picking two-step type of material on consignment

Similar Messages

Maybe you are looking for