PIR problem - Disappeared

Hi PP Gurus,
I have a problem related with PIRs.
PIRs can be created and change in MD61/MD62. What are the possible cause when your PIRs are disappear after 2-3 days?
I checked the PIRs history.
The material has a value of 250 for 11/07/08, after 2 days i noticed that the value was changed to zero (0 for 11/09/08) and the person responsible is DAYBAT. Is it possible that when a job runs it overwrites the value of this PIRs back to zero?
I checked the spool using SM37 (date of change: 11/09/08 08:38:33AM, DAYBAT) but there were no job/spool created for that date and time.
What are the possible cause of this problem?
I hope you can help me.
Thanks
Edited by: russell crystal on Nov 28, 2008 6:15 PM

Russel,
It's not clear to me what you want to know.
1. You already know that the PIRs were deleted by a job run.
2. You know from the PIR history under which user name the job ran.
2,5. It would have been good to know which strategy group you are using - no information has been revealed to us..
3. You know that using trx STAD you can check by which trx the job deleted the PIRs - you didn't tell us about the result of this investigation anything.
4. I assume SAP didn't make the decision on its own to create a job, make it run and after delete it. I mean a real flesh&bone user should be behind the batch job. You can also ask her/him/them.
What can we help you?
Regards,
Csaba
Edited by: Csaba Szommer on Nov 30, 2008 3:44 PM
Edited by: Csaba Szommer on Nov 30, 2008 3:45 PM
Edited by: Csaba Szommer on Nov 30, 2008 3:50 PM
Edited by: Csaba Szommer on Nov 30, 2008 3:57 PM

Similar Messages

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

Start-up problem disappears after several months non-use? Real?

Old Satellite laptop suddenly would not complete start-up when turned on ---- this was more than 18 months ago. So I stopped using it, charged the battery and left it for 18 months. NO usage for 18 months; maybe the battery drained during this time, maybe not.
When I then took laptop to a diagnostic technicianafter those months of non-use, the computer started-up with NO PROBLEM. (I actually do not remember if I recharged the battery just before taking to the diagnostic servicer or not).
Was the nonusage for several months and battery drainage meaninful or not? Would this be just a temporary unknowable problem which disappeared? Since starting the computer several times to try, the computer still starts normally and the only problem I can observe is a stress in the CD drive upon trying to use certain CD's; otherwise, the computer still seems to be working normally, and shows no trouble in start-up.
I do not understand.

Dbrown and others interested,
Here are the basic details:
Laptop Satellite 1415-s115, purchased new in year 2003, Windows XP Home Ed., S.P. 1.
In use a few times per month for about 2 to 2 and a half years. Used for dial-up internet, transferring and copying files, putting onto CD's, and some use for software development. Then, almost daily use from 2006 to mid 2008 for wireless internet use and sometimes transferring and storing files, putting files onto CD.
Suddenly in late spring, 2008 Start-Up would not finish when I turned on computer. After each and every attempt, 15, 20, more minutes, startup was still not finished. In this process, the computer was useless.
Retail technician began an initial try to startup in the retail shop and gave, after various aimless discussions, that testing would take a few hours to do thoroughly and the cost for diagnosis would be ~140 dollars - before any repair attempt. So, at that, the computer was still useless, and our decision was to just store the apparantly dead computer at home, and buy a new laptop computer.
Early summer 2008 through late autumn 2009, I used the new laptop computer, now at Windows Vista on a different model Satellite laptop.
A day in late autumn 2009 --- Let me find what an authorized Toshiba service technician can tell me from his diagnosis! I explained the problem to him. After a couple of minutes, he showed me the old laptop was fully started-up, showing no problem. He said "play around with it a little"; so I did play around with it a little and found no problem. Then, remembering the difficulty from 18 months earlier, I said, do a diagnosis to be sure. He ran tests overnight for several hours. I then was able to pick up my old laptop the next day and he found NO problem during the diagnostic tests. He turned on the computer again and let me play around with some of the programs to see for myself.
Since bringing the old laptop back from the authorized toshiba technician, NO REPAIR NEEDED, I have started it up about two or three times per week and have done a few things and find NO problem with startup and nearly no problem with anything...... just one difficulty with the optical disc CD drive when I put in certain CD's; either something about the paper labels which I used, or something about a CD-R being recorded as "Open" instead of "Closed", ... I'm not yet sure. Those certain CD's seem to suddenly cause a motor noise and the machine becomes extrreeeeeeeemmely slow responding --- only with certain CD's, since most do not seem to cause this particular problem. (These same certain CD's seem to cause some difficulties when I try to read them in another old, desktop machine).
(In case readers in this thread are interested, just two days ago, I updated to XP S.P. 3 on the old laptop)
Well, so tell me what you can think is most meaningful

Problem: Disappear Drill Prompt

Hello,
I have a problem with Web Intelligence BO XI R2.
When I run a drill down on the chart, and then drill up
the drill prompt in context analysis disappear...
even if I run a drill down, then the prompt appears,
but last... without considering order...
How can I solve this problems??
Thanks

Hi Diego,
This is by design behaviour.
Eg :-
If you drill down on year then quarter will appear in the drill filter window, if you drill down on quarter month will apper in the drill filter window.
If you will drill up the objects will disappear from the drill filter window.
I tested this behaviour on BOXIR2-SP5 it was same there.
Regards,
Chaitanya Deshpande

Though installed firefox 10.0, I recently have the application updater.exe running as soon as firefox is launched. The problem disappears when forcefully closing updater.exe, then also firefox calms down. How to avoid this problem?

It consumes 30% of cpu and takes with it firefox, together consuming more than half of CPU and going on >1/2h.
This is a new phenomenon which slows down all other activity on my computer.

After updating to version 10 I closed Firefox.
I noticed that there was a lot of CPU activity.
Checked Task Manager and noticed that in Processes, firefox.exe and plug-in container were running. Opened Firefox and closed again but the processes were still running in TM.
Highlighted firefox.exe in TM and clicked End Process. Both processes disappeared from TM.
Have opened and closed FF a couple of times since with no problem.
However, the OP seems to indicate that this is a problem that re-occurs.
Why is FF not shutting down properly? Is it possibly something to do with the automatic check for add in/extension updates?

Preloader problems - disappears at 60%

Hi,
I have two Preloader problems for a project I'm working on right now.
1. The Main Site preloader disappears when 60% is loaded...with a blank screen lag until moving to the main screen
2. My external .swf Preloader is still on screen after an external .swf has loaded. I can hear the external .swf playing while watching my loader bar at about 20-40%.
I'm going to show the code I have for each...hopefully someone can help. Thanks!
Main Site Preloader:
var yChange = 109.2;
var yStart = 330.2;
myInterval = setInterval(preload,100);
function preload() {
var current = _root.getBytesLoaded();
var total = _root.getBytesTotal();
var pctLoaded = Math.round(current/total*100);
mask_mc._y = yStart - yChange/100*pctLoaded;
if (current >= total) {
clearInterval(myInterval);
gotoAndStop("Main",1);
External SWF Preloader:
var mcLoader:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
mcLoader.addListener(myListener);
myListener.onLoadProgress = function(target_mc,bytesLoaded,bytesTotal) {
extLoader_mc._visible = true;
var pctLoaded = Math.round(bytesLoaded/bytesTotal*100);
extLoader_mc.extLoaderBar_mc._xscale = pctLoaded;
if (bytesLoaded >= bytesTotal) {
extLoader_mc._visible = false;

change soundHandler in the fla to:
// this code below is on the main timeline?
var soundHandler:AdobeCaptivate.rdSoundHandler = new AdobeCaptivate.rdSoundHandler(this);
and change rdSoundHandler:
import AdobeCaptivate.rdSound;
import flash.display.MovieClip; // if this is as3
class AdobeCaptivate.rdSoundHandler extends Object
var m_sounds:Object;
var m_movieSound:rdSound;
var mainMC:MovieClip;
function rdSoundHandler(mc:MovieClip)
m_sounds = new Object();
m_movieSound = null;
mainMC=mc;
function attachSound(key:Number, id:String):rdSound
var sound:rdSound;
if(m_sounds[key] == undefined || m_sounds[key] == null)
{ //attach new sound to the handler
   var newSound:rdSound = new rdSound(mainMC);
// and now you have to find rdSound() class and post that
   newSound.attachSound(id);
   sound = m_sounds[key] = newSound;
else
   sound = m_sounds[key];
   sound.stopSound();
return sound;
function detachSound(key:Number)
{ //remove the sound object from the handler
if(m_sounds[key] != undefined && m_sounds[key] != null)
   var sound:rdSound = m_sounds[key];
   sound.stopSound();
   m_sounds[key] = undefined;
function playAllSounds(bPause:Boolean)
if(bPause == true)
{ //pause all sounds
   if(m_movieSound != null)
    m_movieSound.pause();
   for(var key in m_sounds)
    m_sounds[key].pause();
else
{ //resume all sounds
   if(m_movieSound != null)
    m_movieSound.play();
   for(var key in m_sounds)
    m_sounds[key].play();

CMS problem, disappearing components

Hi.
I am having a problem with our CMS...
When one of our developers releases a component they have been working on the component can be seen in the 'Consolidation' tab as expected. I select the relevant component, click on 'Import' and the component is processed. The import finishes with either a successful or unsuccessful status. When I move to the 'Assembly' tab the component which I have just imported can not be seen at all. If I move back to the 'Consolidation' tab it has disappeared from there too and can not be found on any of the other tabs.
Has anybody experienced a problem like this before? Any help, advice, suggestions of what to check would be gratefully received.
Thanks,
Simon.

Hi Barry. Thanks for that note number. Didn't help this time but I'll keep it for later!!
In the end I found SAP Note 961373 which described my problem, though the solution didn't work first time.
The note describes an SQL statement which can be applied to check if the note is valid - if it returns entries then the note is valid and the fix SQL statement provided should be applied. I did this, it altered a table entry (in CMS_TQUEUE). When running the check statement afterwards it returned no values, showing that the fix statement had done what it should have done. However, this did not remove the nullpointer error from the Assembly tab and did not get the CMS working.
I raised the problem with SAP, SAP's advice was to apply the note again. I ran the check statement again, it returned entries despite not doing so the previous evening. The entries altered by the fix SQL statement appear to have been restored to their previous values. I applied the fix statement again, which again altered one table entry. Once again, the check statement returned no values. This still did not fix the problem.
SAP's advice after this was to apply the note once more. Exactly the same as described above, no fix. However, overnight the table entries did not reappear. The check statement returns no values. The nullpointer error has disappeared from the Assembly tab and the CMS is once again working.
In summary, the note had to be applied three times over three successive days to be successful.

PIR problem

Hi Gurus,
When I create a PO the price is pulled from the PIR maintained at plant level. But the price should be pulled from PIR maintained at Purchase Org level. Both info records exists for this material. How can this be done?
Rewards for appropriate answers. Please help.
Thanks.

Hi,
Sorry it will take the plant specific first, i checked up, to check it, go to t.code m/07 select the access sequence given for ur condtion type, and click access it will show the tables which are ther, find the appropriate.
Nagarajan

Slippery problem: disappearing data from SMB shares

I have an Xserve running 10.5.8 serving as a Samba PDC for my school. Clients are using XP Pro SP2. Every user gets a home directory which is mounted at logon as a mapped drive, and a profile folder which contains the Desktop, My Documents, personal settings, etc.
Every so often a student comes to me because they lost data from their profile. It's a very hard thing to diagnose; often it's user error, but I think not always. Sometimes I can find the missing file(s) on the local drive of the Windows machine if I log on as the local admin, but again, not always. Today I had a student lose a 7-page term paper and he was beside himself. I couldn't find it on the client machine or anywhere on the server.
Has anyone encountered such a problem, or have any other suggestions for how/where to look?

Using OpenDNS is not an option for me for one reason alone: I need to use our internal Nameserver in order to resolve internal IP-Addresses.
The solution under:
http://discussions.apple.com/thread.jspa?threadID=2134936&tstart=45
claims the issue is due to a reverse lookup bug in Windows DNS-Server.
To me that sound's a bit unlikely since half of mankind would then suffer from this issue...but still possible
I tried to put the IP Address of the SMB server (which also is the Active Directory Server) into /private/etc/hosts.
This alone did not help. I then realized with help of Google that OS X would not consult /privat/etc/hosts ( == /etc/hosts) by default when using DHCP.
I was under the assumption that /etc/hosts would always the evaluated in first place.
This made me look at /etc/resolv.conf. And I added "order hosts, bind" to it. Unfortunately I can't really tell if that is a supported directive by OS X. The resolv.conf man page is not explicit about it.
Since I'm using DHCP the file resolv.conf is updated by the OS whenever I change network config. And I do change it a lot...
I've written a quick sh script that I can call to add the order directive to the file.
It's:
#!/bin/sh
mv /var/run/resolv.conf /etc/resolv.conf.new
echo order hosts, bind > /var/run/resolv.conf
cat /etc/resolv.conf.new >> /etc/resolv.conf
While is can only be considered a dirty hack, I'm not sure it's the real solution to the problem.
After making the change connection seems to work better on the LAN. There are still situations though when fetching the directory content is very slow from Finder.
The hack is not an option at all when I'm on a VPN connection. I assume that this is due to the fact that /etc/resolv.conf might not be used for the VPN connection.
I'm counting on 10.6.2

My Yahoo mail has a problem. I cannot use a 'contact' to sned mail. If I go through Internet Explorer the problem disappears.

I have used Firefox a long time without trouble. I recently switched to 'Google Chrome'. When I decided to return to Firefox--I found that I was unable to send mail using a 'contact address' in Yahoo. When I tried using Internet Explorer to send me in Yahoo--It worked without any problem.

Try clearing the cache and deleting cookies for the site, this can sometimes help with accessing a site that previously worked. For details see https://support.mozilla.com/kb/How+to+clear+the+cache and https://support.mozilla.com/kb/Deleting+cookies

Closed Captioning Problem - Disappears (Or Doesn't)

This is driving me crazy!! I have a project in which on some slides the closed captioning disappears at the end of the slide audio, and on some slides the closed captioning stays up at the end of the slide audio. In both cases I have a click box set to rest of slide and pause project until user clicks, along with a text caption set for rest of slide, and audio narration. And that's it.
Why does the CC disappear on one slide at the end but not the other? I want it to be consistent one way or the other.
I copied all the slides to a new project and it behaves the same way. If I publish it to HTML5, the CC disappears at the end of all the slides. If I publish it to SWF, I get the strange behavior above.
I have CP 7.0.1.237 on a Win 7 PC.
Thanks for any help you can give.

I am also encountering this exact same issue. Also just like rgcunningham and DouglasDH5 I have Captivate 7.0.1.237 installed and am running Windows 7. I have two coworkers with the same version of Captivate and Windows who have encountered the exact same issue with this project file (I am troubleshooting it for them actually). I have tried to add silence and adjust the pause timing of the next button as Captiv8r suggested with no luck. I have also tried several other things suggested in other threads about this same issue including switching the skin to a different default skin or deleting and re-importing the audio for the affected slide. Neither of those suggestions worked either. In my searching I have found several threads on this same issue going back through multiple Captivate versions back through at least version 5, and in every thread I have found so far the same workarounds are suggested and no successful result is reported.
Does anyone have any other suggestions that we all haven't tried yet or is this just a bug in the tool that we need to report to Adobe and move along?

[Problem disappeared in new kernel] Bad SSD performance

Hello all, I'm an ex-gentoo user turned arch. Looking forward to it!
Anyway, I have a brand new OCZ Vertex SSD -- theoretical 230MB/s read times. In the livecd installer, hdparm gets 210MB/s reads, pretty awesome. However, in my current installation, I am only getting 75MB/s.
My kernel is 2.6.29, the livecd has 2.6.28. I checked, UDMA/133 is enabled on my drive. I (and some generous IRC users) have absolutely no idea what's happening here.
Any help would be appreciated!
[root@wakka jake]# hdparm -i /dev/sda
/dev/sda:
Model=OCZ-VERTEX, FwRev=1370, SerialNo=92M9W154QY80YY06496G
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=12288
BuffType=unknown, BuffSize=32767kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=62533296
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-5,6,7
Last edited by wakkadojo (2009-06-17 13:40:38)

I have been all over google and many other forums, there's really nothing on this. I'm almost certain it's an Arch linux problem of some sort.
I just gave your suggestion a shot. Here's what we get:
# hdparm -t -W 0 /dev/sda
/dev/sda:
setting drive write-caching to 0 (off)
write-caching = 1 (on)
Timing buffered disk reads: 220 MB in 3.02 seconds = 72.96 MB/sec
So no improvement -- but then again it says it turns off write caching when it really does not.
However, I would like to point out that it is probably not write caching that is causing this slowdown, since on the livecd write caching is enabled, and others have not posted anything about disabling write caching to improve ssd performance.
Last edited by wakkadojo (2009-05-31 23:55:24)

I'm having contacts problems. I just updated my iPhone 4S iOS to 6.0.1. And after that, I started having Contacts problems. My contact list is disappearing automatically, and I have to Import SIM everytime, to bring the contacts back.

It all started after updating my software to iOS 6.0.1. Contact problems, disappearing automatically, and I have to IMPORT SIM everytime when it happens, to bring my contacts back. And this is happening more when I'm using Whatsapp application. Every two hours using Whatsapp, my contact list is dissapearing, I'm seeing only numbers. I thought it was an Whatsapp problem, but after that, when I go into my Phone's contact list, I can see nothing ! Empty ! So I guess it's a software problem or something. Please help. Thank you.

Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

When I click on a aite to open it, I get a problem loading page ,and even retrying doesn't help

I am running XP media center edition. I just had to get it wiped clean and an XP program reloaded, but now when I click on a link, it try's to open another page, but says trouble loading page.

Hello Donald.
Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your issue, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Problem in import statement

Hi There,
I am working on the expense management project using mobile so i just started with the Embedded SQL So,whenever i am trying with following code.
import java.sql.*;
public class ModelMIDlet
private Connection Database;
private Statement DataRequest;
public ModelMIDlet()
String url="jdbc:odbc:CustomerInformation";
String uid="umesh";
Stirng password="umeshD";
try
}catch(ClassNotFoundException er)
System.err.println("Unable to load the JDBC/ODBC bridge" +er);
System.exit(1);
catch(SQLException er)
System.err.println("Cannot connect to the database" +er);
if(Database!=null)
try
Database.close();
}catch(Exception e){}
System.exit(2);
try
{}catch(SQLException er)
System.err.println("SQL error" +er);
if(Database!=null)
try
Database.close();
catch(Exception ex){}
System.exit(3);
if(Database!=null)
try
Database.close();
catch(SQLException er){}
public static void main(String args[])
final ModelMIDlet sql1=new ModelMIDlet();
System.exit(0);
it shows error after running that package java.sql.* does not exist.So please guide me about this problem is it necessary to use additional API related to SQL?

I got this to work this morning.
When you try and set-up the SAP wsdl in .NET it complains about not seeing any port's or complex types. This is because SAP has moved these out into seperate files. .NET doesn't try to link these files at this time. If you simply click on "Add as reference" in Visual Studio at the time of importing the WSDL your problems disappear like magic..
Hope this helps someone..
Jarrod

PIR problem - Disappeared

Similar Messages

Maybe you are looking for