PIV's not displayed while creating Synchronization
Hello All
I am trying to create to synch PSm to M-BOM.
Once I say PSM to BOm synch, only the Product variant is displayed in the screen, no PIV's are displayed
Please can any body help to sort out this issue.
Thanks & Regards
Satish
Hi Satish,
can you please provide some screenshots?
Please check whether the header data is maintained for the usage Engineering for the header material.
Best regards
Bernd
Similar Messages
-
New field catalog VOLEH does not display while creating a new table
Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna. -
Create Asset Master Button does not appear while creating SC.
Dear Friends,
We are working on SRM 5 and trying SSP with classic scenario. The issue is while creating Shopping cart for account assignment Asset, system does not display Create Asset Master button.
We have maintained following configuration in our SRM system.
1. The authorizations object M_BBP_*** is setup and activated for Employee creating shopping cart as well as RFC user.
2. Attribute Asset Class (ANK) is maintained in Organization structure as per Backend asset class
3. Attribute Account Assignment Category (KNT) is maintained for Asset in Organization structure
4. GL account for product category and account assignment is maintained
Still while creating Shopping cart for Account assignment Asset system does not display button Create Asset Master.
Any idea which setting I am missing?
In R/3 I am able to create Asset master while creating Purchase Requisition.
Regards,
Sandeep ParabHi
<u><b>Please go through this -></b></u>
http://help.sap.com/saphelp_srm50/helpdata/en/03/340ff8a5c711d4b2d8000102ade1c8/frameset.htm
Asset Procurement in EBP
Re: Asset number creation in EBP ?
Asset Procurement in SRM 5.0
Re: Cost center in asset item
Note 492107 - Account assignment with asset (changes in EBP)
Note 492073 - Account assignment to asset when creating a shopping basket
Note 897843 - Mixed account assignment types with asset in extended PO
Note 732374 - No default values from attributes for account assignment
Note 921767 - Default settings: Account assignment data is blank in ECS
Note 588898 - Additional documentation for SAP Enterprise Buyer 3.0
Note 575654 - Additional documentation for SAP Enterprise Buyer 3.5
Note 750381 - Asset master number is not transferred from details (2)
Note 674802 - Asset master number is not transferred from details
Note 484020 - No Asset Class Description when creating asset master
Note 936541 - Subsequent note to Note 543055
Note 613671 - RAISE COMPANY_CODE_NOT_VALID with enclosure creation
Note 455124 - Error message on unavailable asset class
Note 579900 - Account assgnmnt screen 2000: asset class transltd incrrctly
Note 399377 - EBP transfer of the asset text via EBP (as of Release 4.5)
Note 493512 - EBP: Message 197 (BBP_PD) not displayed by system
Note 423307 - Messages (BBP_PD) 193/194/195/197/202 translated incorrectly
Note 202684 - No derived account asgnmnt information frm back end
Regards
- Atul -
Bank account number not reflecting while creating invoice some parties
Hi All,
We are facing following issue while creating invoice's for some particular parties.
Bank account number is not reflecting while creating invoice at invoice work bench from front end. Bank account details are properly attached at party site level.
Kindly guide us regarding this.
Thanks,Hi Team,
If you are getting XXXX in place of Bank number then the issue is at (Setup > Payment >Payment Adminstrator).
Log into Payments Setup > Shared Setup > System Security Options. Now you will find "External Bank Account Masking Setting" & Number of Digits to Disp . Now provide the numer of digits to display.
Thanks
Vinod K -
Getting error 'Item 00000 does not exist' while creating a salse order
Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
GeetaHI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert -
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
Entity Attributes are not populating while creating EO using EO wizard.
Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
SagarikaPlease ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ -
BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO
Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadishhello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help -
Duplication in part numbers should not accepted while creating material ma
Hi all,
How can i set Duplication in part numbers should not accepted while creating material master. How can do this requirment plz help me.
thanks
rameshhi,
please check is there any user exit or BADI available and make use of it. -
No member Disk displayed while creating Diskgroups for new ASM instance
Have installed CRS
Have installed DB software
Invoked dbca to create asm instance
Instance created
Disk members not displayed for creating disk groups
OS is Hp ux 11.23The most likely reason on HP/UX is the permissions on the devices, all the devices to be used by ASM (including the devices for alternate paths) should be set to oracle:dba (or what ever user ASM is installed under) and chmod to 664.
-
Total Amount value not displaying while executing print progrm for PO form.
Hi All,
I created the PO form, for this i written a print program.After executing this print program everything s displaying & populating, but only the Total Amount not displaying r not populating.
But, if i run the PO n tcode ME23N the Total Amount is displaying, after assigning the form n NACE.
So help me to get the Total Amount to be displayed n main window, while executing the print program.
Like this i declared n smartform, Total net value excl. tax &is_ekko-waers& &is_pekko-netwr&......
The print program as follows,
report zpo.
tables: ekko,pekko,ekpo,ekpa,eket,ekkn,ekek,komk,nast.
data: fm_name type rs38l_fnam.
data: is_ekko type standard table of ekko with header line.
data: is_pekko type pekko occurs 0 with header line.
data: it_ekpa like standard table of ekpa,
it_ekpo like standard table of ekpo,
it_pekpo like standard table of pekpo,
it_eket like standard table of eket,
it_tkomv like standard table of komv,
it_ekkn like standard table of ekkn,
it_ekek like standard table of ekek,
it_komk like standard table of komk.
selection-screen: begin of block b1 with frame title text-001.
parameters: pr_ebeln like ekpo-ebeln obligatory.
selection-screen: end of block b1.
select * from ekpo into table it_ekpo where ebeln = pr_ebeln.
select * from ekko into is_ekko where ebeln = pr_ebeln.
endselect.code as follows,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZPURCHASE'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
CALL FUNCTION fm_name "'/1BCDWB/SF00000060'
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
IS_EKKO = is_ekko
IS_PEKKO = is_pekko
* IS_NAST =
* IV_FROM_MEM =
* IV_DRUVO =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
TABLES
it_ekpo = it_ekpo
it_pekpo = it_pekpo
it_ekkn = it_ekkn
it_ekpa = it_ekpa
it_ekek = it_ekek
it_komk = it_komk
it_eket = it_eket
it_tkomv = it_tkomv.
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Integration Server not found while creating Business system
Hi all,
I m facing following problems in XI.
While creating Business system, "integration server" name is not displayed in the drop down box. and
I m getting the error "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
thanks and regards
vijayHi Vijay
Please check if you have assigned the correct Integration server to the business system in SLD.
and for the the software component error check if the user has required access (roles assigned) for importing the software component.
Thanks
-Mitesh -
Internal number not showing while creating customer master record
Dear All.
After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is not displaying. I have set number range internally.
Thanks..
CG Balaji> Dear All.
>
> After creation of account group and doing patner
> determination procedure, while creating customer
> master record it is showing all the 4 functions of
> partner in partner function tab page but the internal
> number is not displaying. I have set number range
> internally.
>
> Thanks..
>
> CG Balaji
Hi,
In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
This will allow taking INTERNAL numbers during customer creation.
Thanks and reward points if useful -
All fields are not visible while creating transformation
Hi experts,
I am trying to create transformaion between a LO datasource and DSO designed by me. In R3, in RSA6 I can see more than 45 fields but while creating transformation only 30 fields are available.
I tried by replicating the datasource multiple times but no change.
kindly suggest where I am doing wrong.
thanks and regards,
rajesh.Hi Rajesh, Please follow the follwing steps:
Goto RSA6, select your data source and then click on change and save button.
this will take you to transfer structure. There check the fiels you want to see have hide check box or not. If yes then un hide them. Then save the transfer structure.
Execute the datasource in RSA3. You should be able to see the filds you have unhide in previous step.
replicate the data source in in BW
Goto transfomation in change mode and then to routine. Now you will be able to see the fileld in the routine. -
Country specific "Israel " not found while creating wage type in ECC 6
Hi
While creating the wage type , I am not able to find Israel as a country in the drill down.
Should this be taken as Others or what is the procedure when we are unable to find a country to select.
Thanks
VardhiniHi Vardhini,
You dont have payroll driver for Israel.. You have to assign Molga "99" in u r user profile, and u also need assign "99" as molga in the node assignement of personnel area to company code.
Hope this should resolve ur issue.
Regards
<b>Anil.C</b>
<u><i><b>Reward the points if my answer helps you out.</b></i></u>
Maybe you are looking for
-
I'm installing Acrobat 9 Pro for Windows on a virtual machine on my Mac (running Parallels). I successfully installed the same program using the same discs on the same Mac previously, but that virtual machine became corrupt and can no longer be laun
-
Macbook Pro 10.6.8 -Minor start up issues and graphical problems.
Hey guys, I have a Macbook Pro 10.6.8. I have had this computer since Christmas 2010 and I am pretty sure it was made in mid 2010. In the time I have been using it, it has run smoothely and worked very well overall. However, in the past few months I
-
Uninstalling only Quicktime not iTunes
First, I installed iTunes with Quicktime. Can I only uninstall Quicktime and not uninstall iTunes. If not, how can I back up my songs and videos on iTunes and put them back?
-
Connection Problem To "JMS Queue XML"
Hi. I can't connect to the JMS Queue XML.While Creating Data Server using the JMS XML Queue Technology pointing to WLS and the XML document type definition (dtd ) file books.dtd is provided from the local(C:\Documents and Settings\348773\Desktop\XML
-
Illustrator incompentent Help with layering
I am new to Illustrator and I need help. I know it's a quick fix but I can't figure it out. I have a logo with a 3d font. The font stays transparent even when I created other layers. The images behind it are still showing through. Can anyone help