Placement problem

SCVMM 2012 R2 update rollup 4, SAN with multiple CSV LUN, some for vm data and some dedicated to virtual cluster (with shared vhd on them). A single storage classification: single tier storage.
In the VM templates, If I set the storage classification to single tier storage Placement will fail, trying to put VM on one of the virtual cluster CSV. Removing the storage classification will make things works.
At present time I do not need to use storage classification (only 1 SAN in production) but I could need it in the future. Is there a way to exclude some CSVs from placement? I already edited the cluster nodes hw properties excluding some CSVs but still placement
try to use one of that CVSs and fails.
Any idea?
Dario Palermo

I simply can't get past the placement step in VM creation: all server are reported as 0 star and the rating explanation tells me:
"There is not enough disk space on the available volumes.
Maximum disk space on the most appropriate volume, accounting for the host resource utilization (in megabytes): 971
The virtual machine requirement (in megabytes): 81924
The maximum available space at the time of evaluation, after considering the virtual machine requirements (in megabytes): 971"
On the SAN I've got four 1 GB LUNs, I can see them all in the Fabric Storage panel, 1 of them is also a CSV on the Hyper-V cluster (it contains the shared vhd I'm using for virtual cluster quorum) I'm managing with SCVMM and I suppose that's the one it's
trying to use...
Bye
Dario Palermo

Similar Messages

HTML Help window placement problem

Hi -
We just upgraded to R7 from X5. It seems that now, for our
newly generated Help, the HTML Help viewer will not right-align.
Even if I specify the maximum width in the Window Properties
dialog, when generated, the window only extends about 4/5 of the
available screen width and is LEFT aligned.
Our screens are 1024 x 768 and RoboHelp seems to understand
this because if I max out the window size in the Window Properties
dialog, the height shown = 767 and width = 1019.
Is anyone else experiencing this placement problem?
TIA

Hi, Jack,
> ... the HTML Help window properties dialog only accepts
hard coordinates (i.e. pixels).
> ...
> Unless someone knows differently, for HTML Help,
apparently you can't get the HTML
> Help viewer to appear right-aligned for all
screen/display configurations
Yes, this is correct on both counts. Because of limitations
in Microsoft's design of HTML Help, you cannot specify the
dimensions of the help window in anything other than pixels, and
you can only set the initial position of the window relative to the
left and top edges of the screen.
On the other hand, if you are calling the help file
programmatically from an application, there may be some scope for
controlling the position of the help window by using standard
Windows functions. This article provides a small amount of extra
information:
http://helpware.net/FAR/far_faq.htm#control
Pete

Faces and Places Problem

Hello,
maybe someone could help me (apple telephone support could not):
Faces problem:
I made a smart-album to sort out all the "unnamed faces". But 92 pictures have a strange behaviour. They are tagged as "unnamed" although there is no rectangle in the picture to tag. I've allready used the repair-function and deleted all cache files (telephone support advised me to do both).
Places problem:
another strange thing is places. I've got a few pictures which have more than one "place" tagged. I don't know how this could happen. If you take a look at the screenshot you can see that I made a smart-album with 4 different places (PLACE - IS - XY - AND - PLACE - IS .....) to demonstrate that kind of behaviour

I've noticed that photos I had faces from iPhoto 09 are not syncing (I only had a few).
In the manual list, the faces are not an option to select them. Tried removing and resyncing library and no avail.

Places: problem with the State field in Aperture 3.03

hi,
I live in Europe and I have some problems in handling the State field in Aperture 3.03, because this field isn't always relevant in non North-American Countries.
The Google suggestions in Places don't always include the 4 fields (Location/City/State/Country). I have a lot of pictures taken in the Azores islands (Portugal) which don't show up in my Aperture map because the marker somehow doesn't write Azores in the State field.
Question #1: is there a way to eliminate the State field from Aperture, or at least to render it optional?
Question #2: if I manually create a New Location, what is the proper syntax to separate Location/City/State/Country in a way that will be understood by the Aperture database? I tried putting commas as a separator, but it doesn't seem to be working.
Thanks for your help.

Yes, same here. I cannot complete my registration process due to the same error. My state is correct, which is RS (two letters only). I don't know what else to do. Refer to the image below. Thanks!

Toshiba Places problem connecting to facebook

TV Model 46TL963B connected to sky router using network cable. Have registered with Toshiba places. Trying to connect my facebook account using the email authentication option and it keeps saying problems with server and wont let me connect.
Solution please

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Decimal place problem in smartforms..

Hi All,
I my smart forms i am displaying a quantity filed, but itz displaying with 3 decimal places. But i need to hide the decimal places. I try to use formating option &symbol(.N)& but itz giving error while calling the smart forms.
Plz help me...
Regards,
Pavan.M

Hi,
I've yet to find any SAP documentation or training material the recommends using the table's own header as the Smartforms work area. I have however found it causing unusual problems in the generated function module.
That said, I've tried reproducing your problem and have not been able to. You could try defining a work area and seeing if that helps.
Regards,
Nick

Simple image placement problem

I just recnetly upgraded to Dreamweaver 8 and have a crazy
problem that I don't understand. I'm unable to add picutres
side-by-side. I don't quite understand what is happenening but when
I try and add two images side by side it forces the other down
below it. It doesn't matter how much space is availble or the size
of the images. Right now I'm having to create tables to place them
into but I think that is a terrible solution and I never had this
issue with MX.
Any help would be greatly appreciated.
Jason

<title>template1_2_02 copy.jpg</title>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<style type="text/css">td img {display:
block;}</style>
Reckon that could be a factor in not being able to place them
horizontally
adjacent?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jaysyn" <[email protected]> wrote in
message
news:e79eej$s07$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
> It's hard to say without seeing your page. Can you show
us the code?
>
>
> Here is a webpage I threw on the net real quick.
> I create webpages by creating the template in Photoshop,
slicing it in
> fireworks and then finishing it in Dreamweaver. Using
the CS2 and Studio 8
> software.
>
> I noticed that if I just create a blank page in DW I can
set them
> side-by-side
> but not after I bring in a page from fireworks. Like I
said this process
> has
> never givene me this problem with v7 so any help would
be appreciated.
>
>
http://design.archerworks.com/images.htm
<< it isn't clean right now kind
> of
> just thrown out there for this example.
>
> Thanks,
> Jason
>
>
>

Paste & Paste in Place problem

Hi there,
Recently i have these problem in the following description:
1- Create a new documet.
2- Draw a recangle frame on a page.
3- Copy the frame, and when i go to the other page on the same document the paste command is grayed.
Another problem:
1- Copy empty rectangle frame
2- Go to other page, when i paste the frame is filled with a content (fake content)
Also when i copy an item and try to paste it in place command it's not paste in same place.
I tried troube shooting
http://forums.adobe.com/thread/526990
but there's no solution
I tried Creative Suite Cleaner and reinstall and install indesign but all of these it's not solve the problem.
Indesign CS6 8.0.1
Windows 64bit

Ahem; yes…
Sometimes I should read more carefully.
In the meantime I could have a look at Shlomit's InDesign document.
I think, what he is seeing is not related to the OP's problem, but an issue in itself I can already observe in InDesign CS3.
Something "bad" will happen to the positioning of objects copied from master spreads by "Paste In Place", if the overall width of all pages left from spine is not equal to the overall width of pages right from spine. The pasted (in place) objects will move by half of the value the overall page widths will differ.
Either in positive x-direction, if the violation of symmetry (the wider side) is on the left side of the spine, or in negative x-direction, if the violation of symmetry is on the right side of the spine. It's not important, if the binding is LTR or RTL.
Still I have to test a bit, to see if that hypothesis is sustainable…
What is working alright:
Overriding or detaching objects from the applied master pages.
That will work without seeing a shift.
Uwe

CS, CS2 & CS3 place problem

Hi,
I was just wondering if someone could help me with the following problem:
All l'm doing is placing a text file into a text frame - sounds easy - test code below:
======
set boxContent to "HDPropane:textfile.txt"
tell application "Adobe InDesign CS2"
    activate
    set MyDocument to active document
    try
        set myframe to (text frame 1 of MyDocument whose label is "testbox")
        «event K2 plac» (boxContent) with «class rtfo» without «class imot» given «class insh»:myframe
    on error emg
        display dialog emg
    end try
end tell
========
This works OK and will overwrite the contents each time... the problem is when you link the text frame to another text frame.... it still works fine if you run the script without having any contents in your text frames but as soon as you have some contents you get an error 'import failed' I get the same problem in CS, CS2 & CS3
I've even tried after the 'set myframe' adding set myframe contents to "" - adding this line was a little hit and miss sometimes it worked sometimes l got the same import failed message.
Regards, Gary.

Change this:
        set myframe to (text frame 1 of MyDocument whose label is "testbox")
        «event K2 plac» (boxContent) with «class rtfo» without «class imot» given «class insh»:myframe
to something like this:
        set myframe to (text frame 1 of MyDocument whose label is "testbox")
        set contents of parent story of myFrame to ""
        place file boxContent on myframe without showing options
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro>

Ultiboard parts placement problem

In Ultiboard and desiging a new board layout. When selecting a part from the database and press OK it takes you back to the board layout to place that part but it would select the last part you place to move and place on the board and not the part you just selected. I have upgrade to 12 and this is the first time I have seen this. Has anybody seen this problem?
Reggie

The problem was when I was placing DIP parts (dip8, dip16 parts). I just made a new project and use the board Wizard to design the board. I could place the first part fine but when I would select a 2nd part from the database and press "ok" which takes me back to the board to place the part it would select the first part I place to move. The 2nd part would be placed on the board. I tried to replicate the problem today but could not but there is a new problem now. When I select a part from the database and place it and do a "ctrl-rotate I do not get the "Enter Reference Designation for part" box to show up! Also the curser cross hairs will not show up over the board outline but when you move off the board you can see the cursers. The only ways I can get it out of this is by doubling-right clicking on the board which brings up the PCB properties and X out of that to be able to select another part or do a “ctrl-W” command. If I do not do a rotate then it works fine. Looks like I will have to call tech support about this or has anybody else came across this. I did have this problem yesterday with the first problem.
Reggie

Signature placement problem

I have been using Acrobat 9 Standard & the signature placement for some time without problems.
Recently, when I select the area to place my signature. The signature has been applied, but not in the area i have selected. It is larger than the area selected & I am also unable to move/resize the signature once it is applied.
This is causing me a problem as i generally have a set area on the pdf to sign & with the resizing of the area it is always outside of the required signing box/space.
I have tried to make the area I place the signature smaller than required. However, the signature is generated at the same size again.
Thanks in advance for any help on this problem.
Alex

Oh yes you can
I'll be right back
OK?
Ok,I' back! just read this thread there are two ways todo it
http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=11025
If you need further assistance please ask! If not:
Please resolve the post using the green kudos’ box.. Simply check the post that had ,
your answer in it. Thanks!
Message Edited by Bifocals on 09-06-2008 12:46 PM
Message Edited by Bifocals on 09-06-2008 12:46 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Text placement problem in photoshop 4

I can't control text placement in photoshop 4. When I enter 2 letters, the line then zooms off to the right - right off the image. I tried uninstalling and reinstalling and it didn't help

Your talking about photoshop elements 4?
Or another version such as the old ps4 or photoshop cs4?
If it's photoshop elements 4, you might try resetting the Text Tool by clicking on the big T in the tool options bar and then clicking on Reset Tool

Horizontal Menu Bar Placement Problem in IE

I am having problem determining which CSS rule is causing a
horizontal menu bar to show correctly in the Dreamweaver Design
view, correctly in Firefox, but incorrectly in IE7. I have a
background image in the header, but the menu bar cover it up on the
left side in IE7. Any thoughts?
And while we are at it, any reason that the button hover
color touches the header logo in Firefox (as desired) but is
dropped down several pixels in IE?
I have attached a link to the site for viewing. I have also
attached the CSS code that the menu is using.
www.swcdc.grohse.com
Thanks for any help or ideas!

Anyone who increases their browser's text size will see the same thing. For wiggle room, reduce top-level links from 11 to no more than 7.
Nancy O.

Lightroom 5 File Placement Problem

Snow Leopard. Importing from a camera CF card in a card reader.
My LR folder contains a subfolder named 2013. Subfolders within the 2013 folder are named by date, e.g., "2013-07-01." Recently, however, when I import photographs, LR creates a folder within 2013, also named 2013, and then creates a folder within that folder with the date of the import as the name of the folder.
For example, the hierarchy for today, 31 July 2013, is ~/Pictures/Lightroom/2013/2013/2013-07-31/mygreatpic-1.CR2 etc.
Should it not be ~/Pictures/Lightroom/2013/2013-07-31/mygreatpic-1.CR2? And, for tomorrow, ~/Pictures/Lightroom/2013/2013-08-01/anothergreatpic-1.CR2 etc?
I don't recall having changed any settings, and I can't find a setting to fix this.
Thanks!
David Illig

I have an SSD drive that has my OS and applications. I looked in the Macintosh SSD/Users/[my username]/Library/Preferences/ directory and I do not have a com.adobe.Lightroom5.plist file.
My old Macintosh HD drive has been renamed "Macintosh HD Archive" and I now use it for file archiving. it has a Marcintosh HD Archive/Users/[my user name]/Library/Preferences/ directory which contains the preference files for my older versions of Lightroom (Lightroom, Lightroom2, and Lightroom3).
After I installed the SSD drive and used it as my startup disk I have used Lightroom 4 and Lightroom 5.
Lightroom4 and LIghtroom5 have been installed on the SSD drive. I deleted Lightroom 4 after I installed Lightroom 5.
There is no com.adobe.Lightroom5.plist list file on my Macintosh SSD drive or on my MacIntosh HD Archive drive.
Perhaps the printing problem is due to a failure to create these files with the installation of Lightroom 5.44 on the SSD drive.
I do not recgnize the name "LayoutDirection1.png" as significant any of my images, but its occurence in the console log in association with Lightroom5 at the times print attempt failed suggested that the hangup was due to a missing file.

Text Placement Problem

I'm having an interesting problem with a regular text box. I'm currently editing a co workers work and have come across two paragraphs of text that do something very weird. At the right edge of inside the text box when I try to add a character (.), the text goes to the beginning of the line. So when I type a character it doesn't continue as it normally would but continues at the beginning of the current line I'm on. Not sure if this is a margin or paragraph setting but everything looks normal. Please let me know if anyone has any info... Thanks.

Your subscription would allow you to download the Arabic/English or Hebrew/English version which will have the direction controls. You would need to change the language using the Gear icon in the desktop app, then download ID again and the extra features would be added.
I'm not 100% certain this is the problem -- I never work on RTL text, but it sure sounds like a good bet.

Decimal place problems

Dear Gurus,
Greetings.
The issue is 2 days back I noticed that all my values in the Orders are appearing with one decimal place where as we have maintained in 2 decimal places. Like, we maintained 1234.56 but now it is appearing as 12345.6
When we enter a value in VK11 as 1234.56, it is getting populated a s1234.56 in the Order, but all the other values automatically populated are coming in single decimal place.
In IMG under Currencies / Set Decimal Places for Currencies, if I change the setting to 3 decimal places (since 2 decimal places is not available), my values are showing as 123.456.
But when we check at Table level, it is displaying in 2 decimal palces like 1234.56. That means at the Table level, values are almost always correct but at Transaction display time they are not coming in the correct way.
How to correct this?
Regards.
Venkat - Hyd

HI
> Since very old thread and no more inputs, let me thank every one for their help and close this thread here.
>
This is for the benefit of the forum you have closed all your previous threads as you might have unable to post a new thread.
you have mentioned as since it is a old thread and no more inputs closing the thread
It is your responsible as a forum member if you have solved the issue yourself, then let the other forum members know how you have solved and what is the outcome
regards

Placement problem

Similar Messages

Maybe you are looking for