Plan suspension

I suspended my plan for ninety days which will be up 1 August and I need to suspended it for an additional 90 days. I am in Italy and do not have the toll free international number. Can someone provide that to me at [personal detail removed] I may be able to do this via the web site but I cannot seem to find it.
Bobbiesue

I hope you are having a great time in Italy!
The international number to call is 001-908-559-4899. However, you are able to log in to your online My Verizon account and suspend the line yourself, at no cost. You can complete this online on August 1st, without having to call in, send an email, or submit a posting.
To process your suspension online, please follow the steps below:
1. Log on to your “My Verizon” account using the Account Owner Number and password.
2. Click on “Suspend/Reconnect” icon located under “Device” in the “I Want To” section of your home page.
3. Select the number you wish to suspend from the drop down box and the reason for suspending service would be "Other" and select "continue".
4. Next, you will be given the option to suspend service with or without billing. Select the one that best fits your needs, then select "suspend."
If you select "With billing," your service agreement will not be extended. If you select "Without billing," your agreement will be extended for the amount of time the service is suspended.
I hope this information is helpful and saves you some time and money. Have a safe trip!

Similar Messages

What does it take to cancel a phone line on a mobile plan?

I'm curious about what would happen if I cancelled a phone service on my mobile account. What would it cost me? I have the line on suspension right now. I would like the details on completely canceling the line. Thank you. =)

Actually that depends on How long that phone has been under it's contract. You may incur an ETF=Early Termination Fee. If the line in question only has a month or 2 to go on it's contract I say wait it out then disconnect it. If they the person who has the line are willing to do so ask them if they would be willing to assume AOL=Assumption of Liability of thier line. Have their own plan and pay their own bill. If they are willing to port to another carrier and keep their number (still the same as AOL but with another company) you can set up a day to have the number taken down which would be the day the number is ported out.

Can I get a phone removed from my plan and the remaining contract put on my contract-less phone?

I have 3 phones currently on my verizon plan, one for myself and one for each of two friends. We all paid together to keep costs low, but one just disappeared from the grid and now I have 3 phones, two of which I have to pay for, and I never got the third phone from him. I've just been keeping it in suspension for about a year now, and my contract finally ended. Is it possible to have that part of the plan removed, and have my personal phone take on the remainder of the contract time, thus removing my having to cover for his phone this whole time. I want to keep my own personal number and not have to take his old one.

Stephan.Meno, we want to help you keep costs low. When upgrading to a new device with promotional pricing, you are commiting to a two year agreement for that line. As a result, you're unable to transfer the remainder of that contract to another line as each line as it's own contract end date. However, perhaps a calling plan change will help lower your bill. Have you seen our new Share Everything plans? http://bit.ly/xdDajD
Do you know of anyone that would be willing to transfer that line into their name? http://vz.to/187wQRK
LasinaH_VZW
Follow us on Twitter @VZWSupport

Change plan from shared everything to single line plan.

I have a question about changing plan.
CurrentlyI have shared everything plan and I suspended my account because of military deployment.
Can I change my plan to sing line plan even if I am still on 2 year contract and suspended?
If so, is there any other method to change my plan besides visiting VZ store or calling?
$60 is a lot cheaper than $90 on shared everything plan with 1gb data.
Thank you

Hi Min.S.Kim,
Thanks for the info! We do appreciate your service in the military! When you suspend your line it will stay this way for 90 days then reactivate automatically. When you are on military suspension, you do not have to worry about this happening. We would be happy to fix this for you. Please follow me (bobbys_vzw) and then send me a direct message. I would like to gather some info from you.
Thanks, BobbyS_VZW
Follow us on Twitter @VZWSupport

Take a phone off plan temporairly ( doing this on line)

Is is possible to take one of our 4 phones of our plan while our daughter is in school overseas and then reinstate it when she returns. I know I have done this by calling but its so hard to get to a person that I was wondering if it can be done on line. I don't want to loose that number as when she lands back in the usa it may be in another state and I want to activate it before she lands back and be able to know she has the same number.

You can suspend the line (with or without billing) for up to 180 days each year And yes, if you are the Account Owner and logged in as such, you can put the line on suspension via your on-line MyVerizon account.
Suspend Service FAQs | Verizon Wireless

Suspension of serviss for a while

Hi! Is it possible to suspense adobe creative cloud serviss for a while if we don't use it already 2 month?
If yes, can we restore it quickly?

You cannot suspend CC, but if you are on a monthly plan you can of course cancel it and stop the payments.
Mylenium

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Data Back Up Plan

Hi,
My internal hard drive, 320 GB, 'fully loaded', on my 2 year old imac crashed 10 days ago.
Since I had the extended warranty, the 'local' Apple store replaced the internal drive within hours
at no charge and even loaded Snow Leopard and iLife. With a well updated TimeMachine on an external hard drive I was back working at my imac the next day. When I realized after the crash that my precious 250 GB of pictures in Adobe Lightroom and iPhoto, along with a few videos were saved on just one older Maxtor external hard drive, it made me think about a more solid back up procedure.
The idea now is to move all big volume files to one or more external hard drives.
In the meantime I have transfered the iPhoto and Lightroom files to an external hard drive (WD MyBook II, 2x1 TB in RAID 1), which gives me the first layer of back up: http://www.bhphotovideo.com/c/product/552322-REG/WesternDigital_WDH2Q20000N_2TB_My_BookStudio.html
In a second step I am planning on making a clone (with SuperDuper or CarbonCopy) of the internal hard drive (mainly operating systems and applications) and the external hard drive (all big data files) on one additional external hard drive, i.e. OWC Mercury Elite AL Pro Raid 0, 2 TB http://eshop.macsales.com/item/Other%20World%20Computing/ME8Q7T20GB64/
I am looking for advise here:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
Would appreciate comments and advise.

reckling wrote:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
No. A clone is of your boot volume only. But those apps can make separate backups of multiple drives, either to multiple drives or to separate partitions on the same drive.
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
2 is not only better, but your only option with CCC or SD.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
There is no "right" answer, just a number of possibilities. Some thoughts:
You could use TIme Machine to back up both your internal HD and the WD set to the OWC, if it's at least twice the size of the data on both. It looks like it can be configured as a +Concatenated RAID set+ (both drives into a single 2 TB volume), so that should work well.
Or use TM to back up your OSX drive, and CCC or SD to back-up the media drive.
The CCC or SD backups usually aren't practical to run more than once a day, so consider them your "secondary" backups.
Also strongly consider getting something off-site (safe deposit box, workplace, relative's house, etc.), so you're also protected against fire, flood, theft, direct lightning strike on your power lines. Portable external HDs are great for that. Some things may even be appropriate to take to DVDs.
The problem with that is, there aren't many portables over about 640 GB (LaCie has a 1 TB for either $300 or $400: http://www.lacie.com/us/products/product.htm?pid=11357).
CCC is donationware, so you can use it free for a while. If you decide to keep it, send them some $$ so they can keep it up to date. SD has a free version, but to do updates (rather than a full replacement) or automatic scheduling, you need the paid version (about $30). Either is available via Google, VersionTracker.com, or MacUpdate.com.

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Pension plans in portal

Hi,
We have pension plans and the employees should be able to change the data anytime.
Open enrollment is for one month only and in that dental,medical,life plans are configured But only pension plans should exists for employees all time in portal.
Can anyone suggest me how to solve this issue
Thanks,
Usha

closed

Pension Plans

Hi,
We have pension plans.Our Customer requirement is that to change the pension plans by an employee at any time without any time restriction.
But the open enrollment option is for only 1 month in a year.
Can anyone suggest how I can solve this issue so that employee can only change pension plans at any time.
Thanks,
Usha

closed

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

A/P & Consignment data pull to Planning Cube.....

I put this in "BC & Extractors" section, but did not get any response.....
Need couple of clarifications (brief background is provided.....):
1. We do DELTA extractions using 0FI_AP_3 adn 0FI_AR_4 to a base cube which includes both 'Open' and 'Cleared'
items. From this cube we do a DELTA load to a Planning Cube on a DAILY basis. We filter the data on Company Code
and 'Item Status' (OnlyOPEN Items) for Planning purposes. The key figure pulled to Planning Cube is '0DEB_CRE_DC'.
The bsae cube has data at Line Item Document level, where as the planning cube is only at Customer & Vendor level.
The question is - Will this Daily DELTA to Planning cube with filter on Open Item bring correct key figure? For example,
if the status of one of the items pulled as OPEN in earlier Delta changes to "CLEARED" the subsequent day, will the Key
Figure reflect the changes and show correct value? Is there any impact on the key figure due to the filter on Open Item?
My thinking is the key figure 0DEB_DRE_DC will reflect he correct number (adjsuted) since it is a summated key figure.
I could be totally wrong and want to understand this with comments from experts.
2. Has anyone worked with pulling Consignment (SMI) data into Planning cube? We pull this data using a generic extractor
from a SAP table "RKWA" with some logic. Since I pull A/P data that contains SMI & Non-SMI transactions. To avoid
Double Counting, how can I avoid bringing in the SMI transactions from A/P? There is no flag to diffferentiate the SMI /
Non-SMI transactions....
I am hoping someone has worked in these area to offer expert comments/ recommendations.
Thanks.. Shaun
Please post one question only once
Edited by: Vikram Srivastava on Aug 13, 2010 1:02 PM

Hello Lee,
For your first question as you are using the Filter on the status of the record,
lets say today the status is OPen and as a part of the filter the Delta will be able to pick this record as the status is OPen but if the status is changed to Closed tomorrow then this record will be completely ignored and hence in the next level target you will not have the right status at all.
So you need to plan your filters accordingly.
Hope this helps.
Thanks
Murali

MRP - Auto creation of del schedule lines based on planned delivery time

Hi,
We have activated MRP (type PD) where Purchase requiesition is auto created by system for requirement quantity. We require to optimize delivery schedule in such a way that entire PR quantity is broken into various delivery schedule based on planned delivery time and requirement. Scenario can be further explained with following example.
Material Requirement for a month is say 1,25,000 units
Closing Stock say 25,000 units
PR Generated by system for 1,00,000 units. The entire quantity is schdulled with only one delivery schedule line as per planned delivery time.
The requirement is to generate multiple delivery schedule lines automatically in Purchase requisition based on planned delivery time so that Purchase orders can be placed with system generated delivery schedule lines.
How can it be achieved ?
Regards,
Nirav Kinkhabwala

Nirav,
This subject has been discussed repeatedly in this and other forums. I must assume that you overlooked the rules of engagement, which state that you should first search the forums and other public sites, before posting questions here.
Standard SAP MRP cannot be made to generate multiple items in a Purchase requisition. The functionality you seek is usually achieved when converting purchase reqs to Purchase orders, where many single purchase reqs can be adopted into a single Purchase order.
You also might want to investigate use of Vendor Scheduling agreements.
Best Regards,
DB49

Can I merge several different Verizon plans (different family members each have own plans) into one plan (i.e. can I take over all their lines), if all lines on all plans are on Edge?

I was originally told by Verizon that if I joined, I can eventually take over the lines of various family members. Now that I've joined, and my family members all upgraded their phones and are on Edge, Verizon is telling us that we can't merge into one plan (because Edge lines can't be transferred to another account).
Is this true, and, if so, what is my recourse since I was lied to.

Well, yes and no (as far as being lied to). I asked on several occasions (I have the chat transcripts to prove it) if there would be any issue if the lines were all already on Edge, and was told each time that under no circumstances would there be any issue. The latest being today (I know it's after the fact, but I wanted proof that this is what the chat people are saying). I asked "I have currently have an account with 3 phones on Edge. My brother and his wife, and my parents, also have plans all on Edge. I would like to 'take over' their lines. I want to make sure there is no issue with the Edge plan and that I can simply 'take over' their lines with no problems." I was told "Yes. That would be correct." Again, this is what I was told in the past as well (my original post didn't make clear the timing of the chats and upgrades to Edge..). Every time I chatted I mentioned that the accounts were going to be on Edge or (later on) were already on Edge. Even before my family members upgraded to Edge, not one single chat or phone representative (and my brother asked the same thing in a store) mentioned NOT to upgrade to Edge because it couldn't be transferred. Everyone just said yep, no problem. The ONLY reason I even joined Verizon (I was on Straight Talk) was because of the More Everything and Edge plans (we wanted a family plan with 6 people and over 10GB so we'd each save $25/line). Otherwise I never would have joined Verizon and my family wouldn't have upgraded either.

Plan suspension

Similar Messages

Maybe you are looking for