Planned total not show even running CJEN ancd CJBN

Dear expert,
Please help me on this.
I have set up the project, wbs elements, budget amount and release amount in the system. Some PM work orders have been assigned with the WBS element. But somehow in CJ33, there is no planned total existed for WBS elements. I have run CJEN and CJBN to recontruct infor database and availability control, but the problem still unresolved.
Is there any step I missed out in order to get the planned total updated in CJ31/33? I even checked on report in CJE0, it has the detail amount for budget, actual, plan column. But no subtotal in WBS element for 'PLAN--year'.
Thanks in advance.
Best regards,
FLL

Hi,
Activate the Appended field in OPSV (check box)for order category 30 .
Muzamil

Similar Messages

HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
<Email Edited by Host>

HFM and Planning apps not showing up in workspace..

Hi All
We recently had the SSL certificate expired and after we renewed them, and restarted all the services, the HFM and Planning apps are not showing up in workspace Navigate->Applications. When I click on Classic Administration -> Consolidation Administration or Planning Administration , I get the following error.
"Please make sure that the Application you are trying to launch is registered with SharedServices.Shared Services must be running for the feature you are trying to access.Close the current browser window and try logging into workspace again after a little while.Contact your administrator for further information."
I also cannot open the HFM app in "Projects" in HSS, but can open Planning apps. ( not sure if that helps)
I m able to open the Planning and HFM apps using the Direct links, (not through workspace) and able to login and perform any task with in the application.
The issue looks more like workspace is not able to communicate with Foundation or shared services.
Can you tell me what would be the reason for apps not showing up in the Workspace and a possible resolution?
Thanks in Advance.
Raghu.

Hi Raghu,
I'm faced with the same problem.
If you have managed tor resolve the same, please help me with the solution.
Regards,
Apo

Mail does not show as running nor is it displayed in Cmd-Tab rotation

I know that with Lion, the idea was that it shouldn't matter to the user if a program is currently running or not. So the blue dot in the dock was by default off. A lot of beta testers complained and the option to turn it back on was included. Somewhere in the last few months, Lion updates have changed something behind my back. When I run Mail, the dock blue light never shows even though it does for programs not provided by Apple. But Mail, Safari, iCal, and probably others do not show the blue dot when running. (BTW, in case you haven't read clearly what I wrote, since non-Apple dock icons show the blue dot, it means i HAVE SET THE SHOW INDICATOR lights option in Settings / Dock.)
What is far far worse is that when I press Cmd-Tab, none of these Apple programs (standard programs installed with OS X or programs from iWork or Aperture) are displayed in the cycle of programs I may switch among! I now must either click on the dock Icon with a MOUSE (extra hand movement) or click on a part of ghe window again with a Mouse. While I use the mouse a lot, having many years of pre GUI experience with only a keyboard, I developed a style of minimal movement. If my hands are on the keyboard, I don't want to pick up the mmouse unless there is no other way. Similarly if I'm using the mouse I don't want to go to the keyboard except for a good cause. Up until now, I've been able to do this with OS X (or dare I say with Windows). I've used a version of Mountain Lion and don't recal seeing this issue.
I have looked through out the setttings pages and tried preferences in each Apple application and I cannot find an option to re-enable the proper behavior of Cmd-Tab. Anyone know a way to fix this?
Thanks,

Some info regarding IMAP
http://support.apple.com/kb/PH2585
http://email.cityu.edu.hk/faq/popimap.htm
http://help.yahoo.com/kb/index?page=content&id=SLN3769&locale=en_US&y=PROD_MAIL_ ML
http://techchannel.radioshack.com/difference-between-imap-pop-account-apple-mail -2189.html
It is a newer protocol for mail, almost every provider has switched to it, and POP is virtually gone. It helps in syncing across multiple devices, and everything happens at the server (for the most part) at first you will see lots of activity that you will not recognize, but in time it seems to calm down and you will become used to it. When I first switched I thought I was going to lose my mind..be patient, it has become much better after some time As long as you get your mails, you may see some syncing occurring, not to worry.
Also you can contact your email provider for further info as to how "they do it"(some set-ups are different for each provider) and if there are settings that you may want to use to make it more to your liking.
Hope you find some help here

Planned depreciation not showing in the AW01n for current FY

Hi Experts,
I have an issue on Planned Depreciation and the issue as below.
I have created an Asset with Dep.start date is 10.05.2011 and my Fiscal year is Jan- Dec with 445 posting periods. I have posted Acquisition with the value of 10,000 through F-90. When i check the Asset Explorer through AW01n its not showing Planned deprecation in the Posted Values tab and in Comparisons tab its showing the Dep. from 2012 onwards till useful life and here in 2012 its showing the dep.value from May to Dec only, and also its not showing Dep.value for 2011 year ( showing blank).
If i post the acquistion in 2010, its showing the depreciation from 2011 onwards and also for 2010 year its not showing any planned deprecation.
In Dep. calculation it means % of dep. and every thing is ok. ( its showing the values as per the % stated in dep.key)
I have posted the same scenario to another company code and its showing planned deprecation for 2011 year.
May i know the missed config settings to view planned depreciation.
kindly provide your valuable solution
thanks,
jagadish.P

Hi,
When i click the Dep. calculation its showing as below
Type     To Period         Period Factor     Percentage     Curr.APC
N                 164             0.45055                     0                 0
N                 364             0.54945                 0.125               45,000
thanks & regards,
Gopi.P

Planning project not showing in shared services and planning app wizard

I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
Thanks & Regards.

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

Planned depreciation not showing for posting period

hi,
I have query for planned depreciation.
my company code is having following setting.
1. check "dep to the day" is there.
2. in Fiscal year Variant for the period 7 & 8 the setting is as below.
month day period
8 1 7
8 29 8
so the planned depreciation is not showing in period 8, in period 7 it is showing double (for period 7 & 8). this is the same for posted depreciation also.
please suggest if any setting available for the same.
Thanks,

Why do you have your both periods 7 & 8 setting in the same month 8 ??
Every period and month should be exclusive and look something like this > http://www.saptechies.com/userfiles/Define-Business-Area-5.jpg
Please post your query properly if you don't get this explanation.
Zub

EPM 11 - Planning App not showing up in Dropdown

I have an EPM 11.1 demo on my laptop.
I created a datasource, then using Classic App Wizard, I was able to successfully create an application, and register it to a group in Shared Services.
If I got into SS, I can see the app. If i go into EAS, I can see the App. If I got into the Create App wizard, I can see the app.
However, the app does not show up in the Drop Down list for selectable applications in Planning. Also, the app does not appear in Workspace.
Any ideas on where I might have gone wrong?
thanks

Hi,
My guess is that you have registered it to an instance which is not the default instance or another instance so it wont show.
If you go into the EPM System Configurator, select planning, then Manage Planning Clusters.
Activate Cluster > Select the Cluster Name from the drop down which relates to the instance name you created the application against (I take it you have more than just the default one)
Cheers
John
http://john-goodwin.blogspot.com/

Privilege command: the show run does not show the running-config

Hi,
Whenever I login using "user1" I can successfully authenticate however when I ussue the show run for user1. The only thing that I can see are the following:
R4#show run
Building configuration...
Current configuration : 13 bytes
end
R4#
I have put the command on the router as follows:
~~~~~~~~~~~~~~~~~~~~~
aaa new-model
aaa authentication login ACS group tacacs+ local
aaa authentication login NO-AUTH none
aaa authorization exec ACS group tacacs+ local
aaa authorization exec NO-AUTH none
aaa authorization commands 1 ACS-1 group tacacs+ local
aaa authorization commands 1 NO-AUTH none
aaa authorization commands 10 ACS-10 group tacacs+ local
aaa authorization commands 10 NO-AUTH none
aaa authorization commands 15 ACS-15 group tacacs+ local
aaa authorization commands 15 NO-AUTH none
username user2 privilege 15 password xxx
username user1 privilege 10 password xxx
tacacs-server host 10.50.31.6
tacacs-server directed-request
tacacs-server key xxx
privilege exec level 15 show
privilege exec level 10 show running-config
line con 0
exec-timeout 1000 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line aux 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line vty 0 4
authorization commands 1 ACS-1
authorization commands 10 ACS-10
authorization commands 15 ACS-15
authorization exec ACS
login authentication ACS
end
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Regards,
Lorenz

Lorenz
I believe that the answer is that in implementing privilege levels Cisco designed the show run command so that if you do not have capability to change something that it will not show up in the show run. I believe the logic is that from a security standpoint if you are not authorized to change it you should not be able to see it in the config. So in your case if user1 is not able to change anything then they will not be able to see anything in show run.
HTH
Rick

IPad 3 Mailboxes not showing even after syncing with iMac and switching on SSL and port readings the same; even tried rebuild. Switched iPad off, rebooted and discovered settings went back to preset?

Hi to all techies,
Ipad3 with new iMail does not show mailboxes. Have tried swithcing SSL on and making port same number 993 as imac; then telling imail in imac to synchronise but to no avail still no mailboxes appearing on ipad mail. My husbands new ipad air worked straight away same OS?

I'm sorry. I probably wasn't clear enough in my response. What I am saying is that one can create mailboxes in the Mac mail app and those mailboxes can be for local storage only - the "on my Mac" mailboxes. Those do sync to any other device. The ability to creat those mailboxes is a feature of the Mac mail app.
You cannot create additional mailboxes on the iPad unless your email account is an IMAP account. I am not familiar with BT internet at all so I don't know if you have IMAP or not. I assume that your husband has the same email provider and if his mailboxes did sync to the iPad, then yours should as well.
You can check to be sure if you don't know if your email account is an IMAP account. If you go to your email account in the iPad Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom. If an new mailbox appears, you have IMAP.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

Totals not showing in Discoverer Plus - Urgent please

Hi there,Thanks to all for helping on questions and sharing thoughts.
I got a question from user in Discoverer plus, this is an urgent need.
Actually they built report in Plus in Production based on 2 folders with few conditions and all, everything working fine and getting data.
on one column in the report they need Total mean they used Sum but it is showing only lable not the value, like Sum:
Even we tried Cell Sum, no luck, also I tested format of data and changed to NUMBER datatype, SHOW NULLS AS to 0,
And also created calculation to avoid nulls like case statement if it is null then '0' otherwise that value and did Toal on Calculation column, still not working.
I've seen in Disco Admin Dev/QA, that there is joins between these folders and i regarding getting data is not an issue from user I guess.
Can anyone guide me or point me on this that would be greatly appreciated.
Thanks in advance,
skat

Thanks for your response on this,
I didnt get you, can you explain in brief.
See to avoid null values I created calculation and used case statement.
When I create total using SUM or Cellsum funstions it is not giving data it is giving only the label.
one more thing this is, actually I saved that report on myid and was trying to play and when I try to keep only that column it gave me the result if i add other columns from other folder again getting the same issue.
Any ideas or thoughts on this please.
--skat

Planning server not showing up while attaching BR in Essbase

Hi All,
We are facing an issue with Business Rules Attachment Menu in EAS , when we try to associate a particular BR to a particular Planning Application we are not geeting anything in the drop down list of Servers for Planning ? On the other hand essbase servers are showing up under essbase server heading but we are not sure why it is not happening for Planning servers
We need to resolve this issue urgently pelase help us!!
--XAT
Edited by: user11823008 on Aug 25, 2009 3:22 AM

Standard suggestions on this:
1) Log in to Planning web client and open a form. If you restart your EAS console you should be good to go. This process usually does it for me. It's some kind of weird communications issue between Planning (I think it's the RMI service, but could be wrong on this one) and HBR.
2) If this does not work, a restart of services in the right order does the trick.
You may want to search this board and probably more germanely, the Planning board, as this unfortunately happens all the time. More infrastructure-focused guys than I can probably give you a better reason why this happens.
Regards,
Cameron Lackpour

Activity elements planned values not showing in profit centres and cc.

Hi,
i'm currently working on a project involving Co and PS. I'm in charge of the CO module and i've got a problem with planned values on activity elements and in PS. Planned values are calculated on activty elements and so are actual and they show in real time in profit centres and cost centres but not their planned counterpart values. i've absolutely nothing on profit and cost centres reports. Integrated planning is activated in PS and so is project in versions.
i've asked the PS "Expert" and he said it comes from the "plan cost calculation" tab in cj20n, which obviously isn't the cause.
Doesn't it come from the project profile or status profile customizing? (opsa or ok02)?
Can the problem come from CO?
any help appreciated
regards
xavier

Hi Sreenivas,
thanks for your help and sorry for my late answer.
what is the difference between FAGL_CO_PLAN and transaction 1ke0.
when i log on transaction 1ke0, i can see all my planned values.
wouldn't the issue be resolved by launching t-code faglgcle "fi-gl activate update of plan line items" ?
regards
xavier

PCA Plan Versions Not showing in GR55 Report

Hi Gurus,
My user has uploaded the PCA plan and could see the same in GP12NA for 2011 for plan version Z2. But when she is running the report (P&L )from GR55, the report is not pulling up the plan values. (The report has Z2 as one of its parameters.)
Could you please suggest the places i would need to look to fix this?
(I've checked that the plab vesion is activated for 2011)
Regards,
Erp.Warrior

Hi
Using which LIbrary have you created the GR55 report?
GP12NA is new GL.. So, have you created the report using 0FL LIbrary or a Z library based on FAGLFLEXT?
BR, Ajay M

Interface e1000g0 not showing in running state

Hello all,
I have a sun server SunOS PNR1RAD01 5.10 Generic_144488-09 sun4v sparc SUNW,Netra-T5220 where i have an interface e100g0.
This was earlier in running state but now this doesnt show running state. I tried to reset the interface, checked the cable but it did not help.
Can nyone pls help me on this.
e1000g0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
inet 10.200.2.73 netmask fffffff8 broadcast 10.200.2.79
ether 0:21:28:bd:55:3e

see the below printout from the system:
ossuser@PNR1RAD01 # cat hostname.e1000g0
PNR1RAD01
ossuser@PNR1RAD01 # cat hostname.e1000g1
10.200.3.58
root@PNR1RAD01 # cat /etc/hosts
# Internet host table
127.0.0.1 localhost
::1 localhost
10.200.2.73 PNR1RAD01 loghost
10.200.3.58 PNR1RAD01
One more observation:
root@PNR1RAD01 # dladm show-dev
**e1000g0 link: down speed: 0 Mbps duplex: half**
e1000g1 link: up speed: 1000 Mbps duplex: full
e1000g2 link: unknown speed: 0 Mbps duplex: half
e1000g3 link: unknown speed: 0 Mbps duplex: half

Planned total not show even running CJEN ancd CJBN

Similar Messages

Maybe you are looking for